How To Protect HT-IP206 (IPCAM) At Low Temperature
May 10, 2012
We bought two packs of IPCAM online from a vendor named HooToo, who seems have different online sites for selling various surveillance cameras. What we purchased is a unit with model no. of HT-IP206, according to its advertisement it has a storage temperature as low as minus 10 degree, and adversely high up to 60degree. While on the other hand, it states that the operating temperature shall be strictly between zero and 55degree. What Im concerned is that what if temperature drops down to minus when a camera is fully operating? Shall extra heating system be needed while the real temperature fails to meet the above-said requirement?
View 4 Replies
ADVERTISEMENT
Jun 25, 2012
i have ipcam with ip add i also have a webpage how can i see the cam on the net do i have use my router
View 1 Replies
View Related
May 15, 2011
i have a dlink dir-412 3g router. i want to add one ipcam with the router. but i have no static ip. so how can i configer ipcam in this router.
View 2 Replies
View Related
Jan 17, 2012
how can I set up a wireless ipcam(zmodo) without a modem. I got the camera because it says wireless,but it wants me to hook up via Ethernet connection and i dont have 1. I then got a netgear wndr3300 router but its not connected to anything.My Internet is from a signal within range i pick up.
View 2 Replies
View Related
Oct 28, 2012
I've got an HP Printer which supports ePrint, which is very useful for me because I always need to print stuff, especially when i'm at college.The only problem is: we've got almost 200 people on the same network here. And I don't want radom trolls to just be able to print with my printer. (The printer has a direct wired connection to the network)
View 2 Replies
View Related
Mar 15, 2011
I'm looking for temperature monitor (HDD, CPU) that can be run with parameters, and have cmd result output.I need some software to monitor temperature in Labtech software.
View 12 Replies
View Related
Sep 17, 2012
if there is a MIB for monitoring temperature on a Cisco 800?
View 2 Replies
View Related
Nov 8, 2012
I am trying to find out what the 'normal' operating temperature of the CPU in a 3945 router is? We have just replaced some 2800 routers for 3945's and the NMS server initially complained about the new router CPU temperature being too high. Compared to the 2800 the CPU temperature is much hotter - 50 degrees celcius as opposed to 20-smothing degrees. I have searched but can't find what are considered 'normal'?
This is the output:
router#sho environment allSYSTEM POWER SUPPLY STATUS==========================Internal Power Supply 1 Type: DCInternal Power Supply 1 12V Output Status: Normal
[Code].....
View 3 Replies
View Related
Jul 30, 2011
My proplem is about my home network. There is computers on my home network can access to my files!How can i protect my files from them
View 2 Replies
View Related
Mar 25, 2013
when we add new switch to STP converged enviroment, switch flush the data from the data base.how to protect database from deleting the information
View 10 Replies
View Related
Nov 29, 2011
We are a non-profit organization that is heavily reliant on interns that use their own laptops a lot here. My concern is they come in and connect to our wireless network with no supervision or anything else. I am worried they will introduce a virus, trojan, or something to our network. What the best way to keep them from introducing unwanted malware from a thumb drive, virus in email, or something to that effect shy of standing over them while they install and run an antivirus software?
View 7 Replies
View Related
Aug 4, 2012
At the school I live in various sites are blocked so I need to use a proxy to access them. Is there any way that someone could steal my password or something while I use one? Also, let's say that I use a proxy in one web browser (let's say Opera) to view a blocked site, but then use a different browser (Firefox) with my normal IP, would I be able to use Firefox with no worries if I need to check something like my bank account? Basically, can you restrict them to one program so you can use personal information on one and normal browsing on the other?
View 1 Replies
View Related
Dec 29, 2011
how can we see who are connected to our wireless network and as in some types wireless key can be see or hacked, how can we stop or prevent this.
View 1 Replies
View Related
Aug 19, 2012
How do I password protect my linksys router?
View 2 Replies
View Related
Jun 2, 2011
Right now mine isn't PW protected, but I think I'm going to do that. Anyway, my question is, if I change my router settings and make it PW protected will I have to type that in every time I turn on my computer to get access to the internet?
View 7 Replies
View Related
Jun 10, 2012
I just installed a new Synology DS212j NAS behind an old Belkin F5D7230-4 wireless router (probably from 2006) on my home network. The wifi network uses WPA-TKIP with a strong password but otherwise has no security. The NAS is connected to the router with cat5. The NAS is setup with a couple password-protected shares (accounts setup on the NAS) that the Windows 7 PCs on the wifi network can access.
Since the NAS and router will be on 24/7, what else do I need to do to ensure that the NAS is secure?
View 3 Replies
View Related
Apr 4, 2012
I feel a bit in over my head here as I've never dealt with QoS stuff before, but what I'm trying to do can't be all that difficult. We are using a Cisco ASA 5505 appliance for routing/firewall.We are on a cable Internet connection with 3 MB upload.
On Sunday mornings, we send audio from a device on our network out over the Internet to a radio station which then broadcasts it, but we've had some jitter problems lately and would like to reserve some space for this audio feed to get out without other traffic getting in the way.
The device on our network sending the audio has IP address 192.168.0.22. The device's documentation states it uses TCP 9002 to send session data and UDP 9000 to send the audio data.
So, it seems to me I need to simply tell the firewall to give priority to the device at IP address 192.168.0.22, perhaps also specifying the ports and protocols. I'd rather not try to do this using command line stuff but will do what I need to.
Using the Cisco ASDM launcher to configure the ASA 5505, I created the following security policy but I'm thinking it may be incomplete, or perhaps the wrong thing altogether:
I created a "Source" called WLFJ_Tieline which is a network object with IP address 192.168.0.22.For "Destination" I just chose "any" to cover it all.For "Service" I don't know what I'm doing in that field. I see I can choose from things like TCP, UDP, IP, and also add port numbers, but I'm just not sure what I'm doing in there and chose IP.Then there is the "Source Service" field that I don't know if should be blank.
View 1 Replies
View Related
Jun 8, 2012
Any temperature monitoring unit we can install in our server room that we can use to moniter the room temperature? We had a near catastrophe recently when the air conditioning unit failed to restart following a power outage.
View 3 Replies
View Related
Mar 9, 2013
why getting temperature event in 3560 switch, and we checked the Network room Temp it's normal around (22).
View 8 Replies
View Related
Feb 9, 2012
how do I monitor temperature of my 1921 router? Which commands do I need to put on router and which MIBs to use. I am using PRTG network monitor as a monitoring system.
View 10 Replies
View Related
Dec 17, 2009
The operating temperature for 2100 wireless lan controllers is up to a miximum of 40 degrees celsius according to the datasheet. We deployed some 2112 controllers all displaing a temperature above 50 degrees celsiun. This during normal operation and deployed proper enviromet (aroco ...)
View 2 Replies
View Related
Feb 28, 2011
I will try to explain my problem as clear as possible but my knowledge about networks and routers is very limited.
I have a DIR-615 version:C1 firmware:3.13NA My ISP is ATT DSL Modem is Siemens SpeedStream 4100, it does not have a router built in Internet line is connected from wall to modem, to router, to PC.
after I upgraded the firmware I had no internet coming out of the router, I bypassed the router and connected straight to the PC and I got internet. I unplugged the power on both modem and router waited a whole night (I was too tired) and in the morning internet was back to PC and I had WIFI again BUT. When I put a password on the WIFI network all my stuff finds the signal but cannot connect, if I open the signal meaning if I have no password and the WIFI is open I can connect all of my electronics without any problems.
I already tried using WEP and WPA but still unable to connect anything, I been leaving my signal open when I'm at home for the last week and I don't like it.
Before the update everything worked fine.
I don't know if this matters but I have a PS3, Wii, Roku box, Laptop and a couple cell phones connected to it. And there are like 6 or 7 network signals close to my house.
View 1 Replies
View Related
Dec 19, 2012
Someone told me the commands, but I can't remember them. Have a router (2801) at the end of a highly utilized T1 link/router. How do I protect it so my SSH and/or Telnet sessions will get serviced if the router is real busy.
View 9 Replies
View Related
Jul 11, 2011
I cant remember where I read it but when I noticed that my HDD was running hot even when it was meant to be idle, I read that the router causes the storage device to run at full spin regardless.
I was wondering, do we know if that issue is fixed with this latest firmware update (June 14th)? I've had it on for about 10minutes but I'm not sure how long it takes to get to the temp that it was running at before.
View 4 Replies
View Related
Mar 17, 2013
What is the difference between Operating temperatue & storage temperature of switch C3560E ?
View 2 Replies
View Related
Dec 21, 2011
I have load CISCO-ENVMON-MIB and initiate walk in it but unable to find OID of Cisco 2960 temperature monitor. I have search over net and found .1.3.6.1.4.1.9.9.13.1.3.1.3.1 for temperature but this OID is not responding in this mib.
View 2 Replies
View Related
Jul 28, 2011
i have 3560 switch located in warehouse environments . i need to monitor the temperate of this switch . i am looking for OID value that serves this purpose .
kindly provide me how to look for all OID that give me real time status for FAN .. CPU UTILIZATION ...TEMPERATURE ...OR ANY MAJOR EVENT THAT CAN DISRUPT MY PRODUCT IN .
View 3 Replies
View Related
Sep 18, 2012
How to protect shared folders to denie access from server???i am really in need of a software where i can share files on network but i don't want the system administrator to access those files.
View 1 Replies
View Related
Jun 8, 2012
I have an asus wireless router the router lost connection for a few days and when Internet came back there was no password to protect Internet and was just basically open access. The computer which all the Internet setting are on went away for repair. When the man brought it back after backing up the computer I asked him to put the password back on the Internet. This he has done. We entered the new passwords on our iPhones and they connected and worked no problem. Then we tried to do it with our laptops but they won't connect. Phoned the bloke back he said we had to get the laptops to forget all the old settings for the router and it would on take five minutes but he never told us how to do it.
View 1 Replies
View Related
Sep 23, 2011
I am trying to password protect my router but when I go into wireless> security mode and click on WPA or any of the other choices it goes back to disabled.
View 3 Replies
View Related
Jan 9, 2013
I rexently bought a EA6500 to controll when and how much my children should access internett. Even before I have installed it my son have downloaded a program called Netcut, who hacks innto the router and take controll over the access and the prioritation of computers on the network. Is there any way I can block such software to access my router. I had a livechat with Linksys, and they claimed that the router have no capability to block programs. I also tried to download "Netcut Defender" but my AVG warned me about a worm/virus in the download, so i aborted the operation
View 1 Replies
View Related
Oct 28, 2007
My router has been in use for some time. WRT54G. I did the set up from the disc and instructions and it's been no problems. I would now like to add a password to log on to it from a wireless computer such as my laptop or the other household computer.
View 9 Replies
View Related
May 29, 2012
I got an Linksys WRT54GL-DE and my problem is,that someone manipulates the router.Is there any chance to protect the router in that way,that is not possible to reset the router by using the Reset-ButtonNOR by the Linksys software-tool?Especially the software-tool is the problem - I am afraid,that somebody reset / manipulate the router by using the software.
View 3 Replies
View Related
