Cisco Switching/Routing :: C3560E Difference Between Two Temperature
Mar 17, 2013What is the difference between Operating temperatue & storage temperature of switch C3560E ?
View 2 Replies
ADVERTISEMENT
Cisco Switching/Routing :: C3560E - EtherChannel Connected To Server Is Down
Apr 28, 2013Two ports in C3560E are grouped together in "active" mode.These ports are connected to a EMC server. When I type as below, the channel is in SD mode. The Server admin told me that this is normal behavior since one port is active and the other is in standby mode of which are teamed together.
Switch#show etherchannel summ
...
Number of channel-groups in use: 1Number of aggregators: 1
Group Port-channel Protocol Ports------+-------------+-----------+-----------------------------------------------1 Po5(SD) LACP Gi0/33(I) Gi0/34(I)
Cisco Switching/Routing :: WS-C3560E-24TD IP SLA Responder And Conflict IP Addresses
Sep 8, 2012I have a network topology which you can see on image. All routers are Cisco 3745 with IOS (C3745-ADVENTERPRISEK9-M), Version 12.4(12). SW1 is L3- switch Cisco Catalyst WS-C3560E-24TD with IOS (C3560E-UNIVERSALK9-M 12.2(58)SE2). [code] After that I have problem. When PC with OS Windows 7 begins to work in corporate network, it sees "coflict ip addresses" and doesn't work with network. I've used wireshark and seen, when the PC send arp request a SW1 always send arp reply (see attached file). I think problem with command "ip sla responder", but I haven't searched information about it and I want understand this is bug or normal functioning.
View 1 Replies View RelatedCisco Switching/Routing :: WS C3560E 12SD - Connect Server To Switch Through FC Cable With SPF Module
May 6, 2012Recently I have faced following problem in my office, We have purchased two new Dell Server Power Edge R910 with built-in 10GB FC Network card. Service tag of this two servers are given bellow.
1. 7D94C2S
2. 6D94C2S
You can can Check specification of this two server from dell website{ URL}
We have two CISCO switch and model is given bellow:
Brand: CISCO
Model: WS-C3560E-12SD
We want to connect server to switch through FC cable and both switch have SPF module. But when we connect server to switch, link do not establish even switch and server port light become off.
Then we have tested the following things:
1. Connect server to server through FC cable, it is okay.
2. Connect switch to switch through same FC cable, it is okay.
I don't understand why it is not working.
Cisco Switching/Routing :: Nexus 7000 To Know Ambient Temperature
Nov 2, 2012I need to know how is the ambient temperature for the Nexus 7000 switches to plan a new datacenter. In the datasheet I found the following information regarding this topic:"GR-63-CORE Network Equipment Building Standards (NEBS) specification published by Telcordia Technologies in Section 4.1.2". How are the specification for temperature in this standard?
View 1 Replies View RelatedCisco Switching/Routing :: WS-C2960-24TC-L Display Temperature
May 19, 2013I have an issue with one of our switches, switch model WS-C2960-24TC-L, i am not able to display switch temperature as below,
Switch#sh verCisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 15.0(2)SE2, RELEASE SOFTWARE (fc1)Technical Support: URL ) 1986-2013 by Cisco Systems, Inc.Compiled Tue 05-Feb-13 12:41 by prod_rel_team(code)
Cisco Switching/Routing :: Inlet And Outlet Temperature Sensor In 6500
Mar 9, 2013Below module showing inlet and outlet temperature N/o.How to find the issue related to sensor in the module or something else to troubleshoot in the module to find the issue.
View 5 Replies View RelatedCisco Switching/Routing :: Industrial Ethernet 2000 Series Temperature Ranges
Jul 24, 2012Any explanation regarding these different operating temperature ranges? I would think it doesn't matter the enclosure that the switch is in, it will either work or fail at a certain temperature.,-40C to +70C (Vented Enclosure Operating),-20C to +60C (Sealed Enclosure Operating), -34C to +75C (Fan or Blower equipped Enclosure Operating).
View 0 Replies View RelatedCisco Switching/Routing :: Nexus 5k Power Down Due To Temperature Sensor Policy Trigger
Dec 2, 2012We have a nexus 5k, and it kind of got hung today... it is running. Version 5.1(3)N2(1b) the reset reason shows.Power down due to temperature sensor policy trigger.It doesn't look documented. What policy is it referring to? not sure if this is an IOS bug ?
View 1 Replies View RelatedCisco Switching/Routing :: Modules Operating Temperature And Major Error On 6509E Switch
Apr 6, 2013we have two 6509E which are configured in VSS mode with the following modules in each:
1 48 CEF720 48 port 10/100/1000mb Ethernet
2 8 DCEF2T 8 port 10GE
3 4 CEF720 4 port 10-Gigabit Ethernet
5 5 Supervisor Engine 2T 10GE w/ CTS (Acti VS-SUP2T-10G
I need to know if the temperature of the attached modules are normal or there is a problem?
the status of one of the supervisor engines is "MajFail" as shown below:
Mod Online Diag Status
---- -------------------
1 Pass
2 Pass
3 Pass
5 Major Error
Cisco WAN :: InterVLan Routing Layer 3 Switch With C3560E
Apr 13, 2013I am tryingto add a new VLAN on my C3560E Layer 3 switch for administration purpose.My goal is to make this VLAN for administration only and to let the administrators from 172.17.1.1 connect to any host of the internal network 172.16.0.0 plus exit to the internet via the default gateway 172.16.1.245.
Here an extract of what done so far:
ip routing
spanning-tree mode pvst
spanning-tree extend system-id
vlan internal allocation policy ascending
!
interface GigabitEthernet0/1
[Code]...
What happened is that:
1. The host connected to Vlan30 can correctly ping the interface it is connected to.
2, The internal network can access the internet
3. The host connected to VLAN30 cannot access the internet and cannot connect to any internal server.
Do I have to add a static route? This is a production envuironment and it is my first experiment with a layer3 switching in production, so I cannot mistake
Cisco Switching/Routing :: C4948E / C4948E-F (Chassis Temperature Sensor) OID Value
Nov 3, 2012I want to know OID value for 'Chasis Temperature sensor' of C4948E.as below, I could find it for C4948 but couldn't C4948E and C4948E-F.
======================================== C4948-10G ======================================================
mrtg@WWW:~$ snmpwalk -v 2c -c public X.X.XX 1.3.6.1.2.1.47.1.1.1.1.2
SNMPv2-SMI::mib-2.47.1.1.1.1.2.1 = STRING: "Cisco Systems, Inc. WS-C4948-10GE 1 slot switch "
SNMPv2-SMI::mib-2.47.1.1.1.1.2.2 = STRING: "WS-C4948-10GE 1 slot switch chassis slot"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.3 = STRING: "Chassis Temperature Sensor"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.4 = STRING: "Container of Fan Tray"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5 = STRING: "FanTray"
[code]...
Cisco Switching/Routing :: Difference Between FTE-10G And SFP-10G-SR
Sep 29, 2010explain me the difference between FTE-10G and SFP-10G-SR, being focus on an architecture Nexus.
View 5 Replies View RelatedCisco Switching/Routing :: Difference Between 851 And 881?
Nov 6, 2012I found a 851 router and tried to build a ezvpn tunnel. The issue I am running into now is that a 851 router can only have one vlan in its database. I need two vlans to go into the EZvpn tunnel with using another device. So can you tell me if a 881 router can have more than one vlan created on the router and can those vlans be assigned to a interface and can I create a svi for each of those vlans as well.
View 2 Replies View RelatedCisco Switching/Routing :: Difference Between SFP-10G-SR Or SFP-10G-LR?
Apr 10, 2012what the difference betwen these two cards? SFP-10G-SR or SFP-10G-LR
View 2 Replies View RelatedCisco Switching/Routing :: What The Difference Between L2 Vs L3 VLAN
Dec 9, 2011what the difference between L2 Vs L3 VLAN? in know in which situation i use L2 Vlans but i don't know that about L3 Vlan.
View 2 Replies View RelatedCisco Switching/Routing :: Difference Between 6500 SXJ And SXI?
Nov 25, 2011i would like to check out what's the difference between the naming convnetion for the 6500 IOS.
I read the data sheet to support my POC deployment to support NCS v.1 the 6500 IOS need to upgrade to 12.2 (33) SXI
Is it able to work if i using SXJ instead of SXI, with the same IOS version 12.2 (33)?
Cisco Switching/Routing :: Difference Between 871W / 851 And FTP
Oct 10, 2012I've acquired an 871W, because I'd like to use wireless, to replace my 851. I Ft Pd the 851's configuration to my FTP server and then Ft Pd this to the 871W. Save for the fact that this has a radio interface (currently shutdown), everything works save for FTP from the outside. I can not even telnet to port 21 of any of the internal FT servers. I can telnet to any other port (ssg, smtp, HTTP, https, etc.) but FTP will not pass. What's the difference?
View 12 Replies View RelatedCisco Switching/Routing :: Difference Between WS-X6148A-GE-TX And WS-X6148-GE-TX
Jun 6, 2012What is the different between WS-X6148A-GE-TX and WS-X6148-GE-TX ? Currently, I can not use MTU command on X6148 but can on X6148A.This two cards installed in cat6509E.
View 2 Replies View RelatedCisco Switching/Routing :: Difference Between 3925 / 3925E And 3945
Jan 30, 2013terms of Performance for 3925, 3925E and 3945.
didn't see much different between 3925 and 3925E except an additional port.
Cisco Switching/Routing :: Difference Between Catalyst 3750e 48 And SF300-48p?
Apr 11, 2012what is difference between Cisco catalyst 3750e 48 and SF300-48p.
View 3 Replies View RelatedCisco Switching/Routing :: Difference Between Stack 3750G And 3750X?
Jul 15, 2012I have a cisco WS-C3750G-24TS with IOS flash :/ c3750-mz.122-ipservicesk9-25.SEB4.bin "
I purchased a new Cisco WS-C3750X-24 with the IOS flash :/ c3750e-universalk9-mz.150-1.SE/c3750e-universalk9-mz.150-1.SE.bin. ( NEW )
When i configured a stack between the two 3750, the new switch restarted due the version mismatch (different IOS´s);
We have two versions:
WS-C3750G-24TS-ipservicesk9 flash :/ c3750-mz.122-25.SEB4.bin "
VS
WS-C3750X-24 flash :/ c3750e-universalk9-mz.150-1.SE/c3750e-universalk9-mz.150-1.SE.bin.
Is that possible to configure a stack between then?
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Tenho um cisco WS-C3750G-24TS com o IOS flash:/c3750-ipservicesk9-mz.1
22-25.SEB4.bin"
Adquiri um novo cisco WS-C3750X-24 com o IOS flash:/c3750e-universalk9-mz.150-1.SE/c3750e-universalk9-mz.150-1.SE.bin.
[code]...
Cisco Switching/Routing :: Difference Between IP Base And Universal For 3750X Switches?
Apr 9, 2013What is the difference between IP Base and Universal for 3750X switches?
View 2 Replies View RelatedCisco Switching/Routing :: Core 4506 / Difference Between Sup7 And Sup7L?
Aug 17, 2012I will go to buy a core 4506 but I'm comfusing about the Sup engines and the Fiber module. What is the different between the Sup7 and Sup7L?in the fiber module that I will go to buy is it contain the SFP inside or I have to buy the SFP ( WS-X4612-SFP-E ). also what is the different between the SFP and GBIC?
View 4 Replies View RelatedCisco Switching/Routing :: WS-C2960-48TC-S / Difference Between Transceivers (GLC-SX-MM And MGBSX1)
Jan 29, 2013Switch A is: WS-C2960-48TC-S
Switch B is: SG 300-10MP
Neither switch supports a similiar transceiver module. We are looking at transceiver GLC-SX-MM for Switch A, and MGBSX1 for Switch B all the Layer-1 information (SX / wavelength, Multi Mode, etc.) I am able to find out about the two transceivers seems to match, so would there be any issue by having these 2 "different" transceivers at either end?
Cisco Switching/Routing :: Difference Between Catalyst 3750-X And 4948-10GE?
Jun 6, 2011I want to choose a pair of switches for our data center.What I need: 48 x 1GE access ports, 2 x 10GE uplink ports.Nice feature of 3750-X is stacking. So what features has 4948-10GE? Why I should prefer that switch?
View 11 Replies View RelatedCisco Switching/Routing :: Difference Between Auto Qos And Voip Trust With C2960S
Aug 1, 2012Are there any differences between the autoqos commands on a WS-C2960S switches (or in any other series)? Follow the commands:
- auto qos trust
- auto qos voip trust
I was checking the documentation on this link:
URL
And couldn't find any great difference between the two commands, as far as I could see they'll set the Ingress and Egress queues the same way.
Are there any differences between those two commands (auto qos trust and auto qos voip trust)? If so, when should I use one and the other?
Cisco Switching/Routing :: 2960 - Difference Between SDM Prefer Access And Default
Aug 22, 2012What is the difference between sdm prefer access & sdm prefer default & sdm prefer lanbase-routing? When do we use these options?
View 2 Replies View RelatedCisco Switching/Routing :: 6513 / Difference Between Supervisor Engine 720 Active And Hot Status?
Apr 19, 2013In my 6513 switch chassis we have two Supervisor Engines 720 one is marked Active other as Hot. what is the diffrence in their mode as by name I suppose that Active one is currently in use and Hot one is in standby mode.They are showing in this manner.
Module Ports Card Type
7 2 Supervisor Engine 720 (Active)
8 2 Supervisor Engine 720 (Hot)
Cisco Switching/Routing :: Difference Between Nexus And Usual Catalyst 3750 Switches
May 26, 2013what is the difference between Cisco Nexus switches and the usual catalyst 3750 switches.I do understand the operating system in both these are different.
When will we suggest using Cisco nexus instead of usual Cisco switches? Also what interface does Cisco nexus like 5548 come with , is it both copper and fiber?
Cisco Switching/Routing :: C3750X Stack / Difference Between LanBase And IPBase For ISCSI?
Dec 26, 2011Cisco let us try a CISCO C3750X- 24T-S Stack (2 switches) ->> IpBase Sofware licence We've 2 Hyper-v 2008 R2 and one SAN Netapp FAS2040 connected via Iscsi.All was working well with this stacks.Hyper-V see Nas Iscsi interface without problem. Even with basic stack config (no Vlan, ect...).Then, after this test period, we bought a C3750X-24T-L stack (2 switches) to replace the stack lent by Cisco.This one is LanBase Software.
With this stack, hyper-v work very bad ! We've got a lot of Iscsi error in the eventvwr.I can't access luns.So, is there a difference between LanBase and IpBase for a iscsi use ?I put the 24T-S config on the 24T-L switch without pb. So config is the same on both stacks...Also i've got a "TestPortAsicLoopback" = "Failed" on the new stack...I've tried with other stack cables. Not better.
Cisco Switching/Routing :: Difference Between Using Hsrp On Vlan And Physical Port On 3750 Switch
Nov 14, 2012What the different between using hsrp on vlan interface and on physical port (routed port) on Cisco 3750 Switch? Wha the benefits?
View 3 Replies View RelatedCisco Switching/Routing :: Difference Between N5548UPM-6N2248TP And N5548UPM-6N2248TF Bundle
Nov 24, 2011We have ordered a N5548UPM-6N2248TP bundle. We would like to know if FET-10G sfp’s are included in this. let me know the difference between N5548UPM-6N2248TP and N5548UPM-6N2248TF bundle.
View 3 Replies View Related
