Cisco WAN :: Monitoring Temperature On 1921 Router?
Feb 9, 2012how do I monitor temperature of my 1921 router? Which commands do I need to put on router and which MIBs to use. I am using PRTG network monitor as a monitoring system.
View 10 Replies
ADVERTISEMENT
Cisco :: MIB For Monitoring Temperature On 800
Sep 17, 2012if there is a MIB for monitoring temperature on a Cisco 800?
View 2 Replies View RelatedServer Room - Remote Monitoring Temperature?
Jun 8, 2012Any temperature monitoring unit we can install in our server room that we can use to moniter the room temperature? We had a near catastrophe recently when the air conditioning unit failed to restart following a power outage.
View 3 Replies View RelatedCisco :: Is Temperature Monitoring Via Snmp Supported On 2801 Routers
Jun 19, 2012Is temperature monitoring via snmp supported on Cisco 2801 routers? when i perform a snmpwalk i donot get the associated value for the oids.
View 2 Replies View RelatedCisco Switching/Routing :: Monitoring Port-Security Error-Disable And HSRP With 1921 And 2960
Aug 1, 2012I am looking to simply monitor Port-Security , Error-Disable and HSRP. I would like to receive an email when any of these are triggered.
Port Security - Port Is shut down
Err-Disable - Port goes into err-disable state (securedown)
HSRP - When HSRP standyby changes are detected
I need to receive emails with any of the able are triggered. What is the easiest way to do this? I know SNMP is the main option but I have never worked with SNMP and dont understand it too much.
Equipment:
2x Cisco 1921 series routers
3x Cisco 2960 POE switches stacked
Cisco WAN :: 3945 Router CPU Temperature?
Nov 8, 2012I am trying to find out what the 'normal' operating temperature of the CPU in a 3945 router is? We have just replaced some 2800 routers for 3945's and the NMS server initially complained about the new router CPU temperature being too high. Compared to the 2800 the CPU temperature is much hotter - 50 degrees celcius as opposed to 20-smothing degrees. I have searched but can't find what are considered 'normal'?
This is the output:
router#sho environment allSYSTEM POWER SUPPLY STATUS==========================Internal Power Supply 1 Type: DCInternal Power Supply 1 12V Output Status: Normal
[Code].....
Cisco WAN :: 2801 Router Not Showing Temperature In Show Environment All
Jun 19, 2012We have a Cisco 2801 router running IOS "c2801-spservicesk9-mz.151-4.M4.bin" which we upgraded from previous “c2801-spservicesk9-mz.124-3d.bin”.
Requirement.
We want to monitor the device temperature via snmp but unable to do because temperature ratings are not available on "show environment all" output like below.
Routeri# sh environment all Fan 1 OK Fan 2 OK ILP Power Supply - Absent Fan Speed Setting: Normal
Where as on Cisco 2811/51 & Cisco 3825/45 we can get temperature ratings on "show env all" output.
As per link [URL] below commands are supported on Cisco 2800 series router.
Command options
• show environment all
• show environment fans
• show environment leds
• show environment power-supply
• show environment table
• show environment temperatures
• show environment voltages
I want to know whether this is Cisco 2801 platform limitations or something else. tried to find Cisco doc on this but no luck.
Linksys Wireless Router :: E4200 External HDD Temperature
Jul 11, 2011I cant remember where I read it but when I noticed that my HDD was running hot even when it was meant to be idle, I read that the router causes the storage device to run at full spin regardless.
I was wondering, do we know if that issue is fixed with this latest firmware update (June 14th)? I've had it on for about 10minutes but I'm not sure how long it takes to get to the temp that it was running at before.
Linksys Wireless Router :: E3000 - Temperature At Bottom Getting Very High
Jan 12, 2011Yesterday I installed my new E3000 router. After an hour I noticed that de temperature of the bottom was very high and it stil is . Is that normal?
View 7 Replies View RelatedCisco Switching/Routing :: IP SLA Support On 1921/K9 Or 1921-SEC/K9?
Oct 5, 2012We want to puchase new Cisco ISR 1921/K9 . i want to know does it support the following sample IP-SLA commands
ip sla 2icmp-echo 172.16.1.2timeout 500frequency 1ip sla schedule 2 life forever start-time now
track 10 rtr 1 reachability
delay down 1 up 1
!
track 20 rtr 2 reachability
delay down 1 up 1
ip route 0.0.0.0 0.0.0.0 192.168.1.2 track 10ip route 0.0.0.0 0.0.0.0 172.16.1.2 track 20
Im asking above question because we will need to enable ip-sla on the mentioned router. as i read on the cisco webside, it says Cisco-ISR-1921/K9-IP Base support only IP-SLA RESPONDER feature nothing else. If Cisco-921/K9 does not support the above commands , should i go for ordering Cisco-1921-SEC/K9 ?
Temperature Monitor With Cmd Output?
Mar 15, 2011I'm looking for temperature monitor (HDD, CPU) that can be run with parameters, and have cmd result output.I need some software to monitor temperature in Labtech software.
View 12 Replies View RelatedCisco WAN :: Why Getting Temperature Event In 3560 Switch
Mar 9, 2013why getting temperature event in 3560 switch, and we checked the Network room Temp it's normal around (22).
View 8 Replies View RelatedCisco Wireless :: Internal Temperature WLC 2100?
Dec 17, 2009The operating temperature for 2100 wireless lan controllers is up to a miximum of 40 degrees celsius according to the datasheet. We deployed some 2112 controllers all displaing a temperature above 50 degrees celsiun. This during normal operation and deployed proper enviromet (aroco ...)
View 2 Replies View RelatedMonitoring Router Traffic?
Jan 17, 2012We've had problems with our internet router losing connection to the internet. All traffic stops, a reboot resolves the problem. The router only has a public IP and it's connect through a dummy switch to the ASA as shown. I want to be able to monitor netflow or something and wondered if I could add a static route to the 10.x.x.x network and then add the netflow commands. Here is kind of how it looks, I simplified it some by removing unnecessary devices
View 2 Replies View RelatedHow To Protect HT-IP206 (IPCAM) At Low Temperature
May 10, 2012We bought two packs of IPCAM online from a vendor named HooToo, who seems have different online sites for selling various surveillance cameras. What we purchased is a unit with model no. of HT-IP206, according to its advertisement it has a storage temperature as low as minus 10 degree, and adversely high up to 60degree. While on the other hand, it states that the operating temperature shall be strictly between zero and 55degree. What Im concerned is that what if temperature drops down to minus when a camera is fully operating? Shall extra heating system be needed while the real temperature fails to meet the above-said requirement?
View 4 Replies View RelatedCisco WAN :: DNS Regarding A 1921 Router
May 18, 2011I have installed a Cisco 1921 router in our company and i have stumbled upon an issue with the DNS.
We have a internal DNS server and an internal WEB server. In the DNS server there are records pointing to sites on the WEB server, this is working just fine.
The thing is when i use a public DNS such as 8.8.8.8 (googles public DNS) i cannot resolv the external IP of those sites. I do not want to access the sites and i do not want to send any packets to the sites. All i want is to query the public DNS and resolv the public IP where the site is.
Cisco Switching/Routing :: C3560E Difference Between Two Temperature
Mar 17, 2013What is the difference between Operating temperatue & storage temperature of switch C3560E ?
View 2 Replies View RelatedCisco :: 2960 - Unable To Find OID Of Temperature Monitor
Dec 21, 2011I have load CISCO-ENVMON-MIB and initiate walk in it but unable to find OID of Cisco 2960 temperature monitor. I have search over net and found .1.3.6.1.4.1.9.9.13.1.3.1.3.1 for temperature but this OID is not responding in this mib.
View 2 Replies View RelatedCisco :: 3560 - Need SNMP OID Or Object Name To Monitor Temperature
Jul 28, 2011i have 3560 switch located in warehouse environments . i need to monitor the temperate of this switch . i am looking for OID value that serves this purpose .
kindly provide me how to look for all OID that give me real time status for FAN .. CPU UTILIZATION ...TEMPERATURE ...OR ANY MAJOR EVENT THAT CAN DISRUPT MY PRODUCT IN .
Monitoring Traffic Through A Wireless Router?
Oct 7, 2012how do I monitor a computer through the wireless router
View 1 Replies View RelatedCisco WAN :: Possible To Upgrade 1921 Router
May 3, 2013I am really stuck with router requirement for one of our client. I need 891 SEC router. I think this comes with advanced IP services. What I have is 1921, with IP Base. can I upgrade 1921, so it will become alternative to 891 SEC.
View 1 Replies View RelatedCisco WAN :: Traffic Going Across The Router Is UDP 1921
Feb 23, 2011I'm attempting to set up a Cisco 1921 router running IOS15, and am having trouble with the NAT - it might be that what I am attempting is not possible. The only traffic going across the router is UDP, and the outside of the network canot be changed.
View 1 Replies View RelatedCisco WAN :: Router 1921/k9 Features?
Jun 4, 2012I wish to use a 1921/k9 as a router on a stick. Inside interface interconnects up to 9 VLAN, and performs the routing. Does the 1921/k9 supports trunking and VLANs (I think it should support 16 VLAN, but I am not shure) or I should choose 1921-SEC-k9? Routing performance is the same both on 1921/k9 and 1921-SEC-k9? (I think I'll use static routes or RIP, it is not a large network)
View 1 Replies View RelatedCisco :: LMS 4 - Monitoring Router With Multiple OSPF Processes
Aug 7, 2011i'd like to monitor the OSPF process of my MPLS routers by SNMP. I created templates for
ospfIfEvents
ospfNbrEvents
ospfSpfRuns
ospfNbrState
ospfAreaLsaCount
but when i configure the poller i believe the data i mixed up somehow. I for example i don't get all neighbor in the ospfNbrState. i tried with snmp context configuration but i am not sure if this right what i did.
Cisco Switching/Routing :: Nexus 7000 To Know Ambient Temperature
Nov 2, 2012I need to know how is the ambient temperature for the Nexus 7000 switches to plan a new datacenter. In the datasheet I found the following information regarding this topic:"GR-63-CORE Network Equipment Building Standards (NEBS) specification published by Telcordia Technologies in Section 4.1.2". How are the specification for temperature in this standard?
View 1 Replies View RelatedCisco Switching/Routing :: WS-C2960-24TC-L Display Temperature
May 19, 2013I have an issue with one of our switches, switch model WS-C2960-24TC-L, i am not able to display switch temperature as below,
Switch#sh verCisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 15.0(2)SE2, RELEASE SOFTWARE (fc1)Technical Support: URL ) 1986-2013 by Cisco Systems, Inc.Compiled Tue 05-Feb-13 12:41 by prod_rel_team(code)
Cisco :: Nexus 5000 SNMP Monitor For Temperature Status
Aug 15, 2012May I know how to monitor temperature status of below device by SNMP.How to find the exact oid of those devices? I can only find the mib file of Nexus 5000 at url...Cisco Nexus 5010PCisco UCS 6120XP Cisco ASR 1002F
View 1 Replies View RelatedCisco Infrastructure :: 1841 / 2960 Switch - Temperature OID Needed
Jan 24, 2012I need the temperature oid for cisco 1841 and 2960 switch.
View 1 Replies View RelatedCisco WAN :: 1921 Router Won't Route LAN To WAN Traffic
Feb 18, 2012The router passes the Interface test for the WAN port in CCP but it still we cannot access the internet. Here is my configuration:
Building configuration...
Current configuration : 3663 bytes
!
! Last configuration change at 09:29:52 Chicago Mon Feb 20 2012 by fbcpekin
version 15.1
[Code].......
Cisco Infrastructure :: Configuring NAT On 1921 Router
Jan 31, 2012We are having problems configuring NAT on our Cisco 1921 Router. Below is the running config. The problem we're having is for example our FTP server 192.168.1.16, cannot be accessed from its outside IP address, which is NATed on the router. The server is verified to be up and running and when we do a show debug ip nat, we see the router is translating outside users attempting to access the ftp server to it's correct internal IP address.
View 3 Replies View RelatedCisco WAN :: 1921 - NAT On A Single Router With 2 WAN Interfaces?
Mar 17, 2013I have a 1921 with 3 interfaces. One for the LAN and the other 2 are wan each with a public address. The 2 wan interfaces are used for redundancy. I would like to know how I can static nat the same port and inside address on both wan interfaces.So if the request comes in on one or the other it works. I know if I do a static nat to one of the wan interfaces and then add the same port and inside address to the other wan interface it replaces the previous configure.
View 5 Replies View RelatedCisco WAN :: Gigabit Ethernet Does Not Come Up On 1921 Router
Aug 14, 2011i have a cisco 1921 router and it has ge0/0 (LAN) and ge(0/1) WAN. ge 0/0 is well connected and i can ping it and the LED light is on but ge 0/1 has failed to come up.Ge0/1 is connected to an IDU and has a public IP address. The LED light also does not light on ge 0/1.Where could the problem be?
View 5 Replies View RelatedCisco WAN :: 1921 Router - CD Light Flashing On V2 T1 WIC?
Apr 26, 2012I have a 1921 router with a V.2 T1 wic installed connected to a MPLS circuit. The circuit is down hard and the CD light is flashing. We reseated the WIC card and the circuit recovered for about 30 seconds, then went down and CD began flashing again on the WIC. AL is solid.
View 1 Replies View Related