D-Link DCS-930L :: Video Feed On Website Using ActiveX

Dec 29, 2011

Forum member RDK graciously took the time to develop a tutorial for Setting up a user defined web page to show DLink DCS-930L/932L camera images using the DLink ActiveX control.

View 2 Replies


ADVERTISEMENT

D-Link D-ViewCam :: Is It Possible To Use VLC To View Video From A DCS-930L?

May 3, 2011

Given that D-View Cam stinks (will only run full-screen), is there a way to view the DCS-930L using VLC?

View 14 Replies View Related

D-Link DCS-930L :: Can Stream MJPEG Video To VLC

Mar 20, 2011

I'd like to use VLC to view the MJPEG stream from the DCS-930L. What URL should I use to do this?

View 9 Replies View Related

D-Link DCS-930L :: Video Image Is Scrambled

Mar 7, 2012

Recently, out of the blues, the video feeds on both of my DCS-930L cams are all scrambled.I've tried reset to default, update firmware, using wired, used on Windows7, used on Windows XP, used on Firefox, used on IE...nothing seems to resolve the issue.

View 14 Replies View Related

D-Link DCS-930L :: No Video From Motion Detection?

Apr 2, 2011

First of all, I've purchased a couple of Wifi cameras in the past, and they've always been missing something important (i.e. just returned a Cisco camera because it didn't support WPA2-AES).

So I was thrilled when I first received the DCS-930L - it was sleek, wireless setup was easy, and mydlink.com is slick as well.

But I'm afraid I've found the fatal flaw. I purchased this camera for one reason only - to figure out how mice are getting into my basement! I set up the camera where I suspect they're coming in, set up motion detection (via ftp), and then walked in front of the camera to test it.

To my surprise,  I checked the FTP folder and found dozens of STILL images! What I really need is a video file. Is there NO way to configure the camera to capture video (not still images) when motion is detected? This seems like a huge gap. The Cisco camera I returned could do this.

If it can't do this, can it can be configured to record the last X hours to a shared drive somewhere, so I can at least go back and look at recorded video?

View 1 Replies View Related

D-Link DCS-930L :: Video Samples / Quality

Sep 5, 2011

I'm considering using this cam as a live cam pointed across the street to a beach and ocean view.  Would it produce a decent video if used for this purpose? I've been looking around for some sample video from this cam but so far no luck. Any sample sites I could log into to see the 930l in action?

View 3 Replies View Related

D-Link DCS-930L :: View Video On IPad Without Mydlink App?

Mar 15, 2013

Is there a way to view live video without using the Mydlink app on an iPad?

View 3 Replies View Related

D-Link DCS-930L :: Changed Port Number Now Cannot Access Video?

Nov 26, 2011

With basic "Wizard" setup I got DHCP and port 80 for the camera.  It was working just fine with MyDLink and locally with DLink-ViewCam software and some local test web pages. However, we have a wireless printer on that router which also uses port 80, so when it was installed we set up a "port forward" for port 80 traffic to it for administration from other subnets.  How MyDLink website is able to tunnel through our hardware firewall and the wireless routers firewall to  communicate with the camera is not clear to me (perhaps someone can send me a link to an explanation??), but it works...Thus, to allow access to the camera from other subents, I wanted to change the camera's port from 80 to another, say 8181 and set up the appropriate "port forwarding for TCP and UDP.  All of the steps below were from a PC within the camera's subnet/router so port forwarding is not an issue

View 5 Replies View Related

D-Link DCS-930L :: Mjpg Video Stream Or Sequence Of Jpg Images

Sep 14, 2011

When accessing the camera on mydlink, or on a browser using http://x.x.x.x/mjpg.cgi, I would expect the net bit rate to be substantially less than for a sequence of jpg's, since true motion-jpg uses a lossy form of intraframe compression typically yielding a 20:1 data reduction (according to wikipedia). Indeed, I can readily see this reduction in mjpg clips made on my Canon S5is camera. It's not clear whether that is happening with the d-link DCS-930L camera (640x480, quality "high", java).

View 5 Replies View Related

D-Link DCS-930L :: Unable To View Video On Android Device

Aug 7, 2011

Setup my DCS-930L for DDNS (Dynamic Domain Name Server) so I can access the DCS-930L via the Internet (couldn't access the camera half the the time while on vacation using mydlink) and can now access the camera using my laptop, Android Thrive, and Motorola Droid 3 via the URL I've created but can only see the video when using the laptop.

I have the DCS-930L set to Java but when I log into the camera with the Thrive or Droid 3 (both Android devices) I don't get video. I can make changes to the camera settings and everything else you can do when logged into the camera but just can't see the video. If I change the 'View Mode' in the video setup to 'Image', I will get a picture on all three devices (Thrive, Droid 3, and laptop).What do I need on the Droid 3 & Thrive so I can see the video when I log into the DCS-930L with an Android device?

View 2 Replies View Related

D-Link DCS-930L :: No Date And Time On Video Stream At Mydlink?

Mar 17, 2011

The DCS-930L provides no date & time on video stream at mydlink, but does display those when accessing on the LAN. Is there a way to force the date/time tag to show over the web? Otherwise, remote recording might not know when an event happened?

View 1 Replies View Related

Cisco Firewall :: Video Feed Through ASA 5510 8.2(2)?

Mar 13, 2012

I have a setup using an ASA 5510 8.2(2). In the DMZ (192.168.12.x) there is a server, switch and multiple cameras for surveillance of the site. In the Inside (140.152.25.x) are the pcs that can run the client software to view the video feed, or it can pull from the server in the DMZ.
 
On the server in the DMZ, you can see the feed, along with any pc you connect to that network. On any machine on the Inside, or through VPN, you cannot either with the client software or pulling from the surveillance server.
 
I am watching the connection through ASDM and don’t see any particular port being blocked, but I do see TCP connections being terminated by inspection. So far I’ve taken out inspections for http and rstp. I don’t really see anything else that would drop video. I've attached the error I keep seeing.
 
policy-map global_policy
class inspection_default
inspect dns preset_dns_map

[Code].....

View 7 Replies View Related

D-Link DCS-930L :: Contribute To Our Third-Party Video Monitoring Software List

Nov 23, 2011

Contribute to our DCS IP Camera Third-Party Video Monitoring Software List.Do you have experience using third party software to monitor feeds from your DCS camera? Share your knowledge.  post your contributions here: DCS Compatible Software(i.e. sticky at the top of the DCS Software board)

View 1 Replies View Related

D-Link D-ViewCam :: DCS-930L - Unable To View Video On Android Devices

Aug 7, 2011

Setup my DCS-930L for DDNS (Dynamic Domain Name Server) so I can access the DCS-930L via the Internet (couldn't access the camera half the the time while on vacation using mydlink) and can now access the camera using my laptop, Android Thrive, and Motorola Droid 3 via the URL I've created but can only see the video when using the laptop.

I have the DCS-930L set to Java but when I log into the camera with the Thrive or Droid 3 (both Android devices) I don't get video. I can make changes to the camera settings and everything else you can do when logged into the camera but just can't see the video. If I change the 'View Mode' in the video setup to 'Image', I will get a picture on all three devices (Thrive, Droid 3, and laptop).

What do I need on the Droid 3 & Thrive so I can see the video when I log into the DCS-930L with an Android device?

View 7 Replies View Related

D-Link DCS-930L :: Adding Images To A Website?

May 16, 2011

Excuse my ignorance but, is there an easy way to add the camera image's to a website   Is this a process that utilizes FTP - or  

I do have some experience creating websites using MS Front Page.

View 3 Replies View Related

D-Link DCS-930L :: Unable To Connect To Mydlink Website

Aug 1, 2011

I'm getting an error during setup that says "You are unable to connect to the mydlink web site, and your camera could not be added to your mydlink account." 

View 14 Replies View Related

D-Link DCS-930L :: Can't Setup New 930L With Mac OS X Beta Utility

Mar 29, 2011

I'm using a Verizon DSL router, Mac D-Link Camera Setup Utility (BETA), and Mac OS X 10.6.7.  Configuration of camera is as recommended in manual with CAT-5 cable.  Green light blinks irregularly in a communicating-with-router manner.  The setup utility won't recognize the camera

View 1 Replies View Related

Cisco VPN :: After Windows Update KB2675157 ActiveX RDP Through SSL VPN Stops

May 10, 2012

We have a Cisco ASA 5510 with Clientless SSL VPN portal. I just found that after installing the last Microsoft Updates, RDP bookmarks stopped working. It keeps asking that I should install Cisco Portforwarder control, and then goes back to the home page. I changed all security settings, tried to install the control manually, but nothing works. Finally, I found that after uninstalling Internet Explorer 8 update KB2675157 it works again.

View 7 Replies View Related

Cisco VPN :: ASA5520 Secure Desktop / ActiveX Not Working With IE 10

May 26, 2013

we noticed that the Cisco Secure Desktop / Hostscan is not working with Internet Explorer 10 on Windows7/Windows8.
 
As described here, the SSL VPN is/should working but no documentation about Cisco Secure Desktop / Hostscan. url...It's a Cisco ASA5520 with the lates release.

- ASA Version 9.1(2)
- ASDM 7.1(3)
- Cisco Secure Desktop  csd_3.6.6249-k9.pkg
- Hostscan hostscan_3.1.03104-k9.pkg

View 5 Replies View Related

Cisco VPN :: ASA 5505 - AnyConnect Upgrade / Web Deploy And ActiveX

Jan 13, 2013

Attempting to upgrade from ASA 8.3.2, ASDM 6.3.4, Any Connect 2.5.1 to ASA 8.4(4)1, ASDM 6.4(9) and Any Connect 3.1.00495 using ASA 5505. 

Client is Windows XP SP3 w/ IE7.  Can log into the ASA web portal and starts to install via ActiveX.  I get past the IE7 message bar to authorize installing the ActiveX control.  I briefly see a message that says "ActiveX could not be launched" (I think. It is very fast) and then the install hangs w/ the message in the web connect dialog about the IE7 message bar.  If I let the timer expire, the java install also fails.  If I download the installer via the web portal, and install Any Connect via the downloaded installer, everything works fine. 

Same problem w/ ASA  9.1.1, ASDM 7.1(1) and Any Connect 3.1.02026.  I have added the web page address to the trusted zone, and checked all the zones for permissions to install ActiveX controls, etc.  Worked w/ the older/original software when I remove the kill bit for Microsoft KB2736233.  Have not installed any custom Any Connect profile to use transforms.  I did see in the release notes some information on NO INSTALL ACTIVEX=0, but I think this applies to the per-install package only.   

View 2 Replies View Related

D-Link DCS-930L :: How To Share Camera

Mar 21, 2011

I would like to share my live video from my dcs-930L camera but don't want to give out my password that would allow people to change settings..

View 3 Replies View Related

D-Link DCS-930L :: Playback No Sound

May 5, 2011

i was playing back the recording,when i skipped ahead, the sound disappeared.  I am recording 10 hours worth everyday, most of the time i just need to skip to a certain time to see and hear what was going on,

View 2 Replies View Related

D-Link DCS-930L :: Add An External Antenna

Feb 12, 2013

How to add an external antenna? I'd like to mount a DCS-930L in a location (inside a metal housing) that would need the antenna to be a few inches away. Any internal layout information?

View 3 Replies View Related

D-Link DCS-930L :: Camera Cannot Be Found

Aug 31, 2012

I just brought this D-Link DCS-930L. I insert the disc and follow the instruction and select the option of without WPS and follow the step of connecting the lan cable and power point but at Step 2, after the green light, it keep prompting me that it can't find the camera. it connected to the router where there is a lan cable connected to my pc.

View 1 Replies View Related

D-Link DCS-930L :: How To Do Wireless Setup

May 12, 2011

I had to get a new router from verizon cause the old one died. so i reset the camera and wipe all the dlink software and settings. I then start fresh. i get all the way to choosing wireless and input the password. It states that there is a problem saving your settings. I tells me nothing more. I spent 4 hours on the phone with tech support and i can get it working through wired but I can't put it in my childs room wired. it worked perfectly before the router switch. funny thing is that its the same brand and model router.

View 4 Replies View Related

D-Link DCS-930L :: Can't Connect To Network MAC

May 6, 2011

I downloaded the MAC setup Utility(BETA) and it can't find the camera.The camera is connected via Ethernet-Light on the front under the lens is green (blinks sometimes)First thing I noticed wrong was the setup utility asks if the light on the side of the camera is lit green-there's no light on the side of the camera as far as I can tell. I tried unplugging the camera and hitting the reset button on the back-nothing works.

PC: MAC OSX 10.6.7 (2.2GHz Intel Core 2 Duo/4GB RAM)
Router: Linksys WRT54G Wireless-G Broadband 2.4GHz
Browser: FireFox 4.0.1

View 3 Replies View Related

D-Link DCS-930L :: Cannot Get Camera Settings Tab

Nov 27, 2011

i installed cameras but want to set up for motion. I have 2 dcs 930l cameras and I can see them live i have only 2 settings live video and camera info i also downloaded the link from support.dlink.com i have a new windows 7 laptop and it keeps tryng to download java app problem is now computer keeps asking for a username and password and I have no idea what username and pw it wants as it says in the box it is unsecure

View 1 Replies View Related

D-Link DCS-930L :: Can't Connect To Router

Apr 7, 2011

I just recently purchased the DCS-930L wireless camera, and I am trying to connect it to my Netgear router but it states that there's an error and can't connect.  My itouch and laptop connects fine with the router.

View 6 Replies View Related

D-Link DCS-930L :: Record Offsite Or On A NAS?

Dec 8, 2011

Is it possible to install the D Viewcam software on a PC that is offsite (different network) as the camera and record from there? Basically the camera is home and you record from work.Can I record directly to any NAS (same network as camera) without having a PC in the middle? Or do I need a specific NAS?What about one of those external hard drives that hook up directly to a router?

View 1 Replies View Related

D-Link DCS-930L :: Turn Off Camera?

Jan 22, 2012

I have the DCS-930L set up at home with motion detection emails.  I only want it to be sending emails when I am not home, of course, but there's no way to turn off the camera through my dlink.com as far as I can tell (only an option to remove the camera, which I assume is something more drastic). Is my only choice to unplug the camera when I don't want it emailing?

View 6 Replies View Related

D-Link DCS-930L :: Connection Timeout From 3G?

Jun 10, 2012

I am able to access 930L (2 cams) from wifi be it laptop,iphone or ipad but I am not able to see it through 3g.I have Huawei fibre optics broadband reuter from Starhub.Starhub is running away if ask them to fix it. Huawei never takes the call.I tried atleast 3 times 10 minutes each at 8006011450.It goes to disconnect. The lot talked about UPNP is enable in reuter but it does not work.

Now i talked to Dlink support with ticket DCX36811.They advised to load the firmware.I did it still the connection timeout is there. we have baby to monitor through iphone/android 3g.

View 2 Replies View Related

D-Link DCS-930L :: Can't Get Online Access

Jul 5, 2011

I bought and hooked up my DCS-930L camera last week. Have since traveled overseas and go to Mydlink website, log-in and then it tries to install a java applet that never does install. It shows the security box where it asks me to run and then it shows another security box with a message: java.io.FileNotFoundException:C:usersmynameAppDataLocalLowSunJavaDeploymentsecurity rusted.certs(Access is denied)

I click ok and the java applet never loads. It just keeps saying Installing Java Applet.

View 7 Replies View Related

D-Link DCS-930L :: Is Installation Any Different Because There Are 2 Networks

Mar 10, 2012

I have a DCS-930 running successfully on my home network. Now I want to set up a DCS-932 on a different network at my mother's house in another city, so I can monitor her house from a distance.  Questions:

1. After installing, will I be able to see both cameras at mydlink.com if they are on different networks?
2. Is installation any different because there are 2 networks?
3. Can I use the existing install wizard on the laptop that I used with the 1st installation or should I use my mother's PC?
4. How do I get started since the first instruction is to insert and use the CD that came with the new camera?

Basically I want to know what the install procedure is if I am using a different network but the same laptop I used with the 1st one.  The laptop has a wireless connection to both networks.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved