Home Networking Windows 7 And One Blu-ray Player
May 16, 2011
I have 2 computers running windows 7 home premium and wireless enabled bluray player. One of the computer is desktop and connected to router by wire. Another is laptop and is wireless.Bluray is wireless.I want to establish a network (sharing among all these 3 devices) so that i can stream media from both of the computers to the bluray. At the mean time it would be great to be able to share files between 2 computer when needed.I checked it on google, it says creating a homegroup. I did but another computer does not give me option to join the group, it also has option to create.
View 6 Replies
ADVERTISEMENT
Jan 22, 2013
I have a media player on my home network, which consists of 3 desktop pcs (1 xp home, 1 win 7 home p, and 1 win 8 pro) and 2 nas boxes. Nothing is wireless, all cabled. All pcs can talk to each other and the nas boxes, all have internet access.Problem is when I try to access pc files with my media player. It can access the nas boxes and the xp pc fine, but when i attempt the win 7 or 8 pcs it asks for ausername/password. The win 8 pc has both, but the media player wont accept them, and the win 7 pc has never had a password. I tried putting a password on the win 7 pc, but the media player rejects the user and pw.
View 4 Replies
View Related
Apr 19, 2011
Trying to establish a wireless connection from WD TV Live Plus unit to Westell 327W router using an AirLink 150 adapter. The media player sees my network and seems to have a good signal, but keeps telling me "limited or no connectivity." The media player (with adapter) is about 20 feet from the router with direct line-of-sight.Also, 3 other Wi-Fi devices having no problem connecting anywhere in the house.Power down/power up, move adapter to alternate USB port, re-try connection multiple times.
View 4 Replies
View Related
Oct 16, 2011
After trying most things and spending money like water, I still cannot get our home network to be adequate and I am out of options - Tried using two 100MBit/s Netgear routers "bouncing" signal to each other (Wireless Repeating Function). Not ideal as security is small and speed was slow (<10MBit/s) but at least it worked. However these routers had to get pensioned off when we put gigabit ethernet in the office - and the Netgear replacements (a) still have the security limitations with wireless repeating, (b) anyway see to do a worse job of repeating. Tried buying Netgear directional high-gain antennas and directing the signal point to point to a second router - didn't work at all. Tried Powerline (this was in 2008). It sort-of worked but was unreliable and dog slow. I think this is probably not worked by the fact that this building is OLD, most of the wiring is OLD, and anyway the electrical path would take the signal from the 4th floor, down some very old wiring to the ground floor, across a very old switchboard, and back up to the second floor... it's not quite the same as a modern house with modern wiring. Most recently tried using Netgear's Wireless Network Extender. Again, it sort of works, but it's NOT fast at all. In addition there are times when some of our computers using the extension segment of the network are unable to connect - they can still see 3-4 bars of signal, but they cannot get on the network. Appears to be an issue relating to gateway, or DNS, not sure. But I would say about 1 day in 3, when I come home, my wife tells me that the "internet is off".
View 4 Replies
View Related
Aug 18, 2011
all my program opens with media player.
View 1 Replies
View Related
Jan 23, 2013
Windows Media Player itself won't play videos or show photo images even, though the Icone and the name of the videos and/or photo images are listed on my TV but after the thing goes round and a round it just says "There is nothing to dsiplay or something like that.
View 1 Replies
View Related
Oct 15, 2011
I am trying to set up to watch a live webcast and get the the following essage,"Windows Media Player cannot connect to the server. The server name might not be correct, the server might not be available, or your proxy settings might not be correct." I have tried to verify proxy server settings and it still gives me the message.
View 1 Replies
View Related
Oct 3, 2011
I posted this on a previous thread along with another question, but since I marked that as answered I'll post it here so people will see it.Is there any way I can use UPnP WITHOUT having to have the videos I want to stream in my WMP library? Windows Media Player has always been a pain for me, from my videos not showing up in the library when I know they're there to not being able to switch audio streams in a video. (If VLC Media Player or iTunes had a UPnP library.
View 3 Replies
View Related
Feb 1, 2011
I have been able to play streaming video via Windows Media Player with no problems for just about forever until last month.No software has changed. i have the latest firmware (2.39.2e) for the router. i am able to play the same videos when i use my AT&T data connection or when i am connected at work, ,so i know it's not the files i'm trying to view. WMP fails to play whether i am hard connected or wirelessly connected.
View 1 Replies
View Related
Jan 4, 2012
I have a WRT54G router and for some reason I'm unable to receive the media stream at my home, but when I connected to my friends N-type router it works fine. I have no other connectivity issues. The only thing that I remember doing that may have caused this was to upgrade my firmware because my droid phone wouldn't connect.
View 8 Replies
View Related
Apr 18, 2012
I wan to access a folder shared on windows 2003 server 32bit from a Windows 7 64bit ultimate WS. but after asking password, beside giving correct password, it asks again and agian and do not show folder
View 1 Replies
View Related
Apr 3, 2011
I have a home networking linksys wireless router and want to add my iBook laptop to this network thru the macs airport . I pcs are xp and vista. iBook is mac os
View 1 Replies
View Related
Jun 20, 2012
I've recently changed my DSL connection to HSPA because of low speed of DSL connection (2000).
Anyway, I need to build up 5 Ghz networking at home but there is no dual band HSPA modem router on the market. I need a router which supports DLNA/UPnP for NAS Server. So, I have couple of solutions...
1- I can purchase dual-band Asus RT-N66U and use HSPA/UMTS stick to use this router as main router. I can do this because RT-N66U supports sticks via USB.
2- I can connect my HSPA modem to a dual-band router via LAN and by changing IP adresses I can use dual-band router again as a main modem router. This can be no problem via WAN but my modem has no WAN connection. Is this possible via LAN?
Or do you have any other solution how I can get my 5 Ghz netwroking at home using HSPA connection.
View 3 Replies
View Related
Oct 17, 2012
I am purchasing an older home and I am going to have to rewire the networking to the house. I have decided that I am going to push forward with Fiber Optics as my main networking vehicle. As a side I am going to run COAX and Cat-6 along the same cabling routing. The Ethernet and Coax are fairly straight forward, as long as I don't go over 100meter's Cat-6 will do just fine, and can be terminated to a traditional router. The Coax will be to a splitter for television purposes only. Now the difficult and hard to find information on: My plan for the fiber is to run a zipcord Single Mode fiber line to each room of the home. I am using Single Mode Fiber because it has the highest bandwidth for future applications. These runs will be homerun back to a distribution box next to the other comms where it will plugged into a Fiber Optic Switch to network the rooms together. I am going to run 3 lines to my basement (for a home server, office, and HTPC for the basement theatre.), One line to each of the following rooms: Kitchen, Living Room, and Bedrooms. I have bought off the internet the following: 1000ft of SM Zipcord fiber ($199), 4 Fiber Optic Nic's with PCI-Express 1 connections (for $20 a piece, they only run at about 2GB/s, but I can upgrade these in the future as price comes done), 1 16-port 10GB Fiber Optic Switch with trancievers ($140), Terminals and tools: $300.
I have is about connecting my Home Fiber to the internet. I am going to start running Verizon Fios, and that is not a true fiber optic solution because they run a Fiber to their Media Converter and then Coax from there into the house, but I have talked to them and they said they can run the fiber cable into the home. I am wanting to connect that cable straight to my Fiber Optic Switch which would then be connected directly to my computers, as well as a fiber optic wireless router, and then from my switch to their ONT for tv and phone. My question is will this work? What kind of problems will I run into, and what other hardware do I need to get this up and running. I basically do not want to run copper to any of my devices..I either want them to network wirelessly or with a fiber line. (even the wireless will be running fiber since will connect directly to the fiber line via the fiber switch.)So it is expensive, but I believe it is worth it. 200ft of Cat-7 copper costs $199 vs 1000ft Fiber at the same price..and the fact that Cat-7 does have a life-limit on it's bandwidth where as fiber is the future.
View 5 Replies
View Related
Mar 11, 2011
I would like to set up a TV in my spare room which does not have a coax plug. Because of the set of my house running coax cable to this room, although possible, is something I am hoping to avoid. This is because if I was to run the cable on the outside of the wall it would get in my way and it will cost $300 to $400 for a tech to come out and run it through the wall.My first thought was to set up an old computer in my living room and have it connect to a cable box. Then I would send the video signal over the wireless network. The problem is that I cannot change channels on the other end. I have been reading up on power-line networking and it looks like a good option for my problem. I was hoping to find a device that will allow me to plug coax cable into it in the living room send the signal through the power-line to another device in my spare room where my TV receiver would be located. Is there anything like this out there on the market? If not are there any other options I can look at?
View 1 Replies
View Related
Jul 13, 2011
I am trying to establish a home network for an HP laptop running Windows 7 wirelessly to a 2wire modem for file sharing with my Vista PC. My laptop recognizes the 2wire network but Vista won't.Do I need to download drivers or adjust any firewall settings?
View 11 Replies
View Related
Jun 18, 2011
Both computers run xp. Desktop is had wired to router, laptop is wireless.If router is password protected, is the work group I created safe as well?
View 3 Replies
View Related
Mar 23, 2012
Home Networking: I would like to add an 802.11n wireless router to an existing Verizon FiOS modem/router. I've read numerous How To articles, but frankly am still uncertain of the best approach. Also, as an aside, would you recommend a single or dual band wireless router? I will have one laptop with a special Centrino Wireless LAN card (3x3).
View 3 Replies
View Related
Mar 13, 2011
I've just setup a box with Windows Home Server 2011 RC. It's a AMD X2 with 3GB RAM. Everything is fine with that, but I'm noticing my internal network speeds are pretty slow. I'm seeing on average 0.8MB/s transfer speed between my PC's and the server, and between the PC's themselves. I have everything wired through a Linksys WRT54GS router.Is this as much as I can expect from this setup? It's painful trying to copy media files (music, pictures and HD video) to the server at such slow speeds! What would I need to do to get better speeds? I'm assuming a different router could do better.
View 7 Replies
View Related
Aug 27, 2011
I've decided I want to hard wire all my stuff in our family room; however, the modem and router are upstairs in my office. I've got a few options available and wanted to get some opinions from those who have tried any of them. Here are my three options:
1) Install NETGEAR MCAB1001 MoCA Coax-Ethernet Adapter Kits
2) Install Monster PowerNet 300 Power Line Network Modules
3) Run the Ethernet cables through the wall, under carpet, etc.
I'm primarily looking for info about the speed differences, ease of troubleshooting, etc.
View 19 Replies
View Related
Oct 30, 2012
I am working with a friend who has a home office that is not in a location where DSL or Cable is available. His only option for internet is using a hotspot - in this case, the Elevate Hot Spot from AT&T.
He needs to network two computers so that he can enable QuickBooks Pro in multi user mode - i.e., data file shared on Computer A, accessed by Computer B.
I thought at first that perhaps I could just setup a wireless connection for the office network - however, whenever that connection is on, then obviously neither computer can access the hotspot.
Trying to keep this at *minimal* cost.
My best idea is to old school network - i.e., connect the two computers via crossover ethernet. Am I correct that this will work? Seems to me that then both computers *should* still be able to access the hotspot via their wifi, yet also be networked for file sharing.
My questions are:
1.) Is this a correct assessment?
2.) Are there any road blocks I should be thinking about?
3.) Any reason not to do a direct connection (i.e., any reason I should entertain connecting to a switch instead?)
4.) Is there a certain order I should do things?
View 2 Replies
View Related
Mar 28, 2012
Modem - (MODulator/DEModulator) This converts your xDSL analog signals into a digital format for use on your home network. A modem can also be part of a Router/Modem combination device.This device typically sits at the very edge of your network at your ISP's demarcation point (the point from where their responsibility for equipment ends).
Router - A router serves to 'route' information from network to network. I.e. A router will route information between the network 192.168.1.0 and 172.16.1.0. Generally your home routers will come as a modem/router/wifi access point package. It will basically route packets of information that are generated on your LAN (Local Area Network) to the internet, and in turn, route packets from the Internet to your LAN devices.
Wifi access point - Obviously provides a wireless Ethernet signal so that you can connect wireless devices to your home network. Typically, the wireless access points you will see will come as a combination of router/modem/wifi point. You can buy extra wireless access points (not wifi routers) and place them strategically throughout your home to increase signal coverage.
Switch - Uses hardware addresses to 'switch' packets through the LAN. Normally a domestic router will have 3 or 4 switch ports built into it. However, switches do come as standalone devices and can be used to increase the breadth and scalability of your home network by using the extra ports they provide to patch in more devices.
Host - A host is basically your PC, iPad, smart phone, laptop that is situated on your home network.
NAS Drive - (Network Attached Storage) Contains storage space that can be used as network a share by connecting it your home network.
NIC - (networt interface card) this is the component that allows your PC/Laptop to be hard wired into your router or switch. It will have an RJ45 jack so that you may connect Category5 and onwards patch leads into it from your router or switch. This talks with your computer's main motherboard and operating system to give you network connectivity.
MBs vs Mbps - MB = Mega Bytes (this measures file size) and Mbps = Mega bits per second (this measure network throughput).
Wireless card/receiver - as above but wirelessly.
View 6 Replies
View Related
Oct 25, 2012
Shopping for a new home router/firewall. Trying to decide between a Cisco ASA 5505 or a juniper equivalent. What are everyone's thoughts?
View 16 Replies
View Related
Dec 7, 2011
Although we have a moderately wired house with cat6 cables runs in many of the rooms that all end in the basement, I am currently having trouble since I cat stream audio and video files from my desktop in the den to the netbook and receiver in the family room. All computers are hooked up by cable.I have tried a friends advice to plug in the exact IP address of the desktop (and vice versa on the netbook) but still the netbook cat find the desktop nor can the desktop find the netbook. I have tried home sharing in Windows 7 to no avail as I have been prompted to initiate a home network both on the netbook and the desktop when I think it is suppose to be initiated on one machine and same home network joined by the other.DSL Modem --> Linksys WRTGL router running Tomato --> switch -->various rooms (cont.)Family room (one of the various rooms) has a Buffalo WZR-HP-G300NH AirStation (with one USB port) --> 1) netbook and 2) Denon AVR receiver (with network capabilities)I have a switch in the den and the desktop and laptop computers can read off each other through folder/drive sharing even with Kaspersky Internet Security running in the background so I'm sure it's not Kaspersky meddling with my network sharing. If both are on the wireless network, the netbook can access the desktop and vice versa.Is it possible for the netbook to read off the desktop based on my current set up? I can't bring the desktop down as we use them in the den and will not have room for it in the family room. I am not inclined to purchase a stand-alone HTPC at the moment if there is a network sharing
View 2 Replies
View Related
Aug 11, 2011
I am planning to imlpement an ASA 5505 in my home network and I am wondering if this is a valid configuration. I am wondering if it is necessary to have 3 separate internal subnets or if these can be cabeled together in a more efficient fashion?
I plan to keep the 2 servers (game, e-mail) branched off the ASA directly in a DMZ configuration. The rest of the clients connect through the wireless/wired router.
Any unforseen problems with a setup like this (Modem -> Firewall -> Internal Router)? I have read sites that say I will have to accept an IP via DHCP for the ASA's external interface.
View 1 Replies
View Related
Apr 17, 2013
Today I set up a home network:Cable router plugged in to......Homeplug network, (D-Link DHP-307AV/B 200 MBPS PowerLine Homeplugs) plugged in to a LAN port of......a spare adsl router configured as per here: Connecting Additional Routers | Tech Support Forum...with two desktop machines plugged into the LAN ports of the ADSL router.Both of the desktops have got similar specs, are equi-distant from the ADSL router, and are both connected using Ethernet, not wireless.One of them gets a 9MB/sec ADSL [URL]download, the other can't even bring the webpage up and times out if you ask Google to do a search.Taking out the adsl router and plugging the desktop straight into the homeplug gets a network speed of ~13MB/sec on [URL].Plugging a computer directly into the cable modem gives network speeds of ~40MB/sec on [URL] How can I improve on this, and have it so that both machines can access the Interwebnet at a decent bandwidth?
View 8 Replies
View Related
Apr 22, 2011
on my home network I currently only run an Airlink101 AR675W router. We have a couple issues with this. The router for one is in my basement and there are points in my house that have low signal strength, especially upstairs in the far corners of the home. Second is I am currently running my home PC as a media center but it is set-up wirlessly so streaming is clunky and jittery. Also on this network is 3 X-box's wired, a PS3 running wirless, 2 PC's wired in, 2 wirless laptops and the afore mentioned wirless PC. A lot of weight for the network. What I want to do is move the router upstairs, hardwire it into my wireless PC (the one doing the streaming) and connect a second router (an identical make and model I am buying this weekend) downstairs which will be basically used as an "expansion" of the wirless and a switch for the hardwired devices downstairs. would this be better than simply moving the wirless router upstairs (hardwiring my PC) and putting a 5 or 8 port switch in downstairs for the X-box's and 2 wired PC's there?
View 2 Replies
View Related
Dec 10, 2011
I have a Dlink DIR-655 router for my wired and wireless router for my home network. I have a 100ft cat6 ethernet cable. I pulled it from the router to my home server in my basement.
Does the 100ft cable make a difference or does the fact that it's a cat6 cable make a difference?
When moving similar files at work, it's faster. So I'm trying to find out what's the bottleneck at home. What speeds should I expect for a home network?
View 5 Replies
View Related
Apr 18, 2012
I've enabled the Media Server on my E3000 router. My PS3 can see the server and play media from it by my PCs can't!
I'm using Windows Media Player v 12.0 on Windows 7 and some older version on Windows XP and it's my understanding that the Media Server should appear under the "Other Libraries" section but it does not.
Am I doing something wrong? Is there a bug in the E3000 firmware (I have the latest as of this date) or is the Media Server simply not compatible with Windows Media Player? compatible media player for Windows 7?
I did read a post about a firmware upgrade on the 4200 that broke the media player, but I don't know if such a problem exists for the E3000.
View 1 Replies
View Related
Mar 13, 2011
I have been having a bit of trouble with networking my two machines to share files and allow printing i have a win 7 laptop and a xp home desktop. I share a net connection via 02 wireless box both systems have wireless i have tried many things
View 8 Replies
View Related
May 21, 2011
Currently, I have 2 Apple Airport Extremes, and 1 Wireless Netgear ADSL Router. The 2 AAEs are connected separately to the router, and this allows us to get coverage in most part of the house (it's a large house with concrete and granite walls). I also have a HP Officejet 8500 'wireless printer' that is wired to the router as you can only print to the printer when it's in standby with a physical connection to the router (that's a different story). So my goal is to replace everything as the router is slowly dying and as a result of this, I want to be able to access the Internet wirelessly throughout the house, and be able to print from any where in the house without anything connected via cables. And as a bonus, I would like the Internet to be accessible 100 yards/metres down the garden (workshop is there). Basically, blanket coverage!
View 3 Replies
View Related
May 30, 2012
My laptop (Win 7 x64) can currently access all the shares on the XP computers in my home network but,although I can see it, I cannot access the laptop from my main xp computer. I haven't tried to access it from the other xp computers downstairs. I have read the guide on this site as well as 3 or 4 other threads on this subject but am unable to resolve the issue. Completing the network setup so that I can look into my laptop from this main xp computer. My laptop has a wireless internet connection but I also have it plugged into my wired home network for sharing. I will provide other details as needed. I suspect that some essential services for file sharing may not be running on the laptop, but I'm not sure.
View 19 Replies
View Related
Sep 11, 2011
Trying to network between a Windows 7 computer and a Windows XP computer is possibly the hardest thing I have ever done.I have googled for hours and hours and none of the solutions seem to be working.I will try to explain what I have already done. Although I have done loads and I am sure I am missing some things.I have a Windows 7 laptop and for this exercise I shall call it WIN7. I have a Windows XP computer and for this exercise I shall call it WINXP.Both computers are in the same network which I have called SAMNETWORK. I have enabled permission to Everyone in folder sharing settings on WIN7. I have turned on Sharing and I have made myself discoverable with no password set on Network and Sharing Advanced Settings. Both user accounts on the XP and 7 machines are the same and both passwords are the same. I have turned all firewalls off. The WINXP computer has sharing enabled.
I have done a lot more things including installing LLTP (sp.?) and changing registry entries like Lsa/anonymous something like that (can't remember the actual directory) but I have changed registry entries as I have read elsewhere on the web and I have changed the network from home to work but that did nothing etc. etc. But everything that everyone suggests is just not working and I have been looking for about 4 hours now so you can imagine I have tried everything I have found!Anyway, my 7 laptop can see WINXP but when I click on it, it states that Windows cannot access \WINXP. The WINXP computer can see shared folders from WIN7 but it also states that it is not accessible. However, I did once get the WINXP computer to access the WIN7 shared folders. However, that doesn't even work now. I need the WIN7 to access the WINXP files. [code]
View 1 Replies
View Related
