Home Network :: Using 5 Ghz Networking With HSPA?

Jun 20, 2012

I've recently changed my DSL connection to HSPA because of low speed of DSL connection (2000).

Anyway, I need to build up 5 Ghz networking at home but there is no dual band HSPA modem router on the market. I need a router which supports DLNA/UPnP for NAS Server. So, I have couple of solutions...

1- I can purchase dual-band Asus RT-N66U and use HSPA/UMTS stick to use this router as main router. I can do this because RT-N66U supports sticks via USB.

2- I can connect my HSPA modem to a dual-band router via LAN and by changing IP adresses I can use dual-band router again as a main modem router. This can be no problem via WAN but my modem has no WAN connection. Is this possible via LAN?

Or do you have any other solution how I can get my 5 Ghz netwroking at home using HSPA connection.

View 3 Replies


ADVERTISEMENT

Home Network :: Unable To Get Home Networking

Oct 16, 2011

After trying most things and spending money like water, I still cannot get our home network to be adequate and I am out of options - Tried using two 100MBit/s Netgear routers "bouncing" signal to each other (Wireless Repeating Function). Not ideal as security is small and speed was slow (<10MBit/s) but at least it worked. However these routers had to get pensioned off when we put gigabit ethernet in the office - and the Netgear replacements (a) still have the security limitations with wireless repeating, (b) anyway see to do a worse job of repeating. Tried buying Netgear directional high-gain antennas and directing the signal point to point to a second router - didn't work at all. Tried Powerline (this was in 2008). It sort-of worked but was unreliable and dog slow. I think this is probably not worked by the fact that this building is OLD, most of the wiring is OLD, and anyway the electrical path would take the signal from the 4th floor, down some very old wiring to the ground floor, across a very old switchboard, and back up to the second floor... it's not quite the same as a modern house with modern wiring. Most recently tried using Netgear's Wireless Network Extender. Again, it sort of works, but it's NOT fast at all. In addition there are times when some of our computers using the extension segment of the network are unable to connect - they can still see 3-4 bars of signal, but they cannot get on the network. Appears to be an issue relating to gateway, or DNS, not sure. But I would say about 1 day in 3, when I come home, my wife tells me that the "internet is off".

View 4 Replies View Related

Home Network :: Cable TV And Powerline Networking

Mar 11, 2011

I would like to set up a TV in my spare room which does not have a coax plug. Because of the set of my house running coax cable to this room, although possible, is something I am hoping to avoid. This is because if I was to run the cable on the outside of the wall it would get in my way and it will cost $300 to $400 for a tech to come out and run it through the wall.My first thought was to set up an old computer in my living room and have it connect to a cable box. Then I would send the video signal over the wireless network. The problem is that I cannot change channels on the other end. I have been reading up on power-line networking and it looks like a good option for my problem. I was hoping to find a device that will allow me to plug coax cable into it in the living room send the signal through the power-line to another device in my spare room where my TV receiver would be located. Is there anything like this out there on the market? If not are there any other options I can look at?

View 1 Replies View Related

Networking :: Home Network Very Slow Between PCs WRT54GS

Mar 13, 2011

I've just setup a box with Windows Home Server 2011 RC. It's a AMD X2 with 3GB RAM. Everything is fine with that, but I'm noticing my internal network speeds are pretty slow. I'm seeing on average 0.8MB/s transfer speed between my PC's and the server, and between the PC's themselves. I have everything wired through a Linksys WRT54GS router.Is this as much as I can expect from this setup? It's painful trying to copy media files (music, pictures and HD video) to the server at such slow speeds! What would I need to do to get better speeds? I'm assuming a different router could do better.

View 7 Replies View Related

Home Network :: Best Option For Networking Two Computers With Only Hotspot?

Oct 30, 2012

I am working with a friend who has a home office that is not in a location where DSL or Cable is available. His only option for internet is using a hotspot - in this case, the Elevate Hot Spot from AT&T.

He needs to network two computers so that he can enable QuickBooks Pro in multi user mode - i.e., data file shared on Computer A, accessed by Computer B.

I thought at first that perhaps I could just setup a wireless connection for the office network - however, whenever that connection is on, then obviously neither computer can access the hotspot.

Trying to keep this at *minimal* cost.

My best idea is to old school network - i.e., connect the two computers via crossover ethernet. Am I correct that this will work? Seems to me that then both computers *should* still be able to access the hotspot via their wifi, yet also be networked for file sharing.

My questions are:

1.) Is this a correct assessment?

2.) Are there any road blocks I should be thinking about?

3.) Any reason not to do a direct connection (i.e., any reason I should entertain connecting to a switch instead?)

4.) Is there a certain order I should do things?

View 2 Replies View Related

Home Network :: Basic Networking Terms And Devices?

Mar 28, 2012

Modem - (MODulator/DEModulator) This converts your xDSL analog signals into a digital format for use on your home network. A modem can also be part of a Router/Modem combination device.This device typically sits at the very edge of your network at your ISP's demarcation point (the point from where their responsibility for equipment ends).

Router - A router serves to 'route' information from network to network. I.e. A router will route information between the network 192.168.1.0 and 172.16.1.0. Generally your home routers will come as a modem/router/wifi access point package. It will basically route packets of information that are generated on your LAN (Local Area Network) to the internet, and in turn, route packets from the Internet to your LAN devices.

Wifi access point - Obviously provides a wireless Ethernet signal so that you can connect wireless devices to your home network. Typically, the wireless access points you will see will come as a combination of router/modem/wifi point. You can buy extra wireless access points (not wifi routers) and place them strategically throughout your home to increase signal coverage.

Switch - Uses hardware addresses to 'switch' packets through the LAN. Normally a domestic router will have 3 or 4 switch ports built into it. However, switches do come as standalone devices and can be used to increase the breadth and scalability of your home network by using the extra ports they provide to patch in more devices.

Host - A host is basically your PC, iPad, smart phone, laptop that is situated on your home network.

NAS Drive - (Network Attached Storage) Contains storage space that can be used as network a share by connecting it your home network.

NIC - (networt interface card) this is the component that allows your PC/Laptop to be hard wired into your router or switch. It will have an RJ45 jack so that you may connect Category5 and onwards patch leads into it from your router or switch. This talks with your computer's main motherboard and operating system to give you network connectivity.

MBs vs Mbps - MB = Mega Bytes (this measures file size) and Mbps = Mega bits per second (this measure network throughput).

Wireless card/receiver - as above but wirelessly.

View 6 Replies View Related

Networking :: Home Network Setup Incorporating Cisco ASA 5505

Aug 11, 2011

I am planning to imlpement an ASA 5505 in my home network and I am wondering if this is a valid configuration. I am wondering if it is necessary to have 3 separate internal subnets or if these can be cabeled together in a more efficient fashion?

I plan to keep the 2 servers (game, e-mail) branched off the ASA directly in a DMZ configuration. The rest of the clients connect through the wireless/wired router.

Any unforseen problems with a setup like this (Modem -> Firewall -> Internal Router)? I have read sites that say I will have to accept an IP via DHCP for the ASA's external interface.

View 1 Replies View Related

Home Network Very Slow - Using Spare ADSL Router And Homeplug Networking?

Apr 17, 2013

Today I set up a home network:Cable router plugged in to......Homeplug network, (D-Link DHP-307AV/B 200 MBPS PowerLine Homeplugs) plugged in to a LAN port of......a spare adsl router configured as per here: Connecting Additional Routers | Tech Support Forum...with two desktop machines plugged into the LAN ports of the ADSL router.Both of the desktops have got similar specs, are equi-distant from the ADSL router, and are both connected using Ethernet, not wireless.One of them gets a 9MB/sec ADSL [URL]download, the other can't even bring the webpage up and times out if you ask Google to do a search.Taking out the adsl router and plugging the desktop straight into the homeplug gets a network speed of ~13MB/sec on [URL].Plugging a computer directly into the cable modem gives network speeds of ~40MB/sec on [URL] How can I improve on this, and have it so that both machines can access the Interwebnet at a decent bandwidth?

View 8 Replies View Related

Home Network :: Multiple Router Networking Versus Adding A Switch?

Apr 22, 2011

on my home network I currently only run an Airlink101 AR675W router. We have a couple issues with this. The router for one is in my basement and there are points in my house that have low signal strength, especially upstairs in the far corners of the home. Second is I am currently running my home PC as a media center but it is set-up wirlessly so streaming is clunky and jittery. Also on this network is 3 X-box's wired, a PS3 running wirless, 2 PC's wired in, 2 wirless laptops and the afore mentioned wirless PC. A lot of weight for the network. What I want to do is move the router upstairs, hardwire it into my wireless PC (the one doing the streaming) and connect a second router (an identical make and model I am buying this weekend) downstairs which will be basically used as an "expansion" of the wirless and a switch for the hardwired devices downstairs. would this be better than simply moving the wirless router upstairs (hardwiring my PC) and putting a 5 or 8 port switch in downstairs for the X-box's and 2 wired PC's there?

View 2 Replies View Related

Networking :: Does Length Of Cat6 Cable Make Difference In Home Network DIR-655

Dec 10, 2011

I have a Dlink DIR-655 router for my wired and wireless router for my home network. I have a 100ft cat6 ethernet cable. I pulled it from the router to my home server in my basement.

Does the 100ft cable make a difference or does the fact that it's a cat6 cable make a difference?

When moving similar files at work, it's faster. So I'm trying to find out what's the bottleneck at home. What speeds should I expect for a home network?

View 5 Replies View Related

How To Add Mac With Wireless Home Networking

Apr 3, 2011

I have a home networking linksys wireless router and want to add my iBook laptop to this network thru the macs airport . I pcs are xp and vista. iBook is mac os

View 1 Replies View Related

Wiring A Home For The Networking Future?

Oct 17, 2012

I am purchasing an older home and I am going to have to rewire the networking to the house. I have decided that I am going to push forward with Fiber Optics as my main networking vehicle. As a side I am going to run COAX and Cat-6 along the same cabling routing. The Ethernet and Coax are fairly straight forward, as long as I don't go over 100meter's Cat-6 will do just fine, and can be terminated to a traditional router. The Coax will be to a splitter for television purposes only. Now the difficult and hard to find information on: My plan for the fiber is to run a zipcord Single Mode fiber line to each room of the home. I am using Single Mode Fiber because it has the highest bandwidth for future applications. These runs will be homerun back to a distribution box next to the other comms where it will plugged into a Fiber Optic Switch to network the rooms together. I am going to run 3 lines to my basement (for a home server, office, and HTPC for the basement theatre.), One line to each of the following rooms: Kitchen, Living Room, and Bedrooms. I have bought off the internet the following: 1000ft of SM Zipcord fiber ($199), 4 Fiber Optic Nic's with PCI-Express 1 connections (for $20 a piece, they only run at about 2GB/s, but I can upgrade these in the future as price comes done), 1 16-port 10GB Fiber Optic Switch with trancievers ($140), Terminals and tools: $300.

I have is about connecting my Home Fiber to the internet. I am going to start running Verizon Fios, and that is not a true fiber optic solution because they run a Fiber to their Media Converter and then Coax from there into the house, but I have talked to them and they said they can run the fiber cable into the home. I am wanting to connect that cable straight to my Fiber Optic Switch which would then be connected directly to my computers, as well as a fiber optic wireless router, and then from my switch to their ONT for tv and phone. My question is will this work? What kind of problems will I run into, and what other hardware do I need to get this up and running. I basically do not want to run copper to any of my devices..I either want them to network wirelessly or with a fiber line. (even the wireless will be running fiber since will connect directly to the fiber line via the fiber switch.)So it is expensive, but I believe it is worth it. 200ft of Cat-7 copper costs $199 vs 1000ft Fiber at the same price..and the fact that Cat-7 does have a life-limit on it's bandwidth where as fiber is the future.

View 5 Replies View Related

Home Networking Windows 7 And One Blu-ray Player

May 16, 2011

I have 2 computers running windows 7 home premium and wireless enabled bluray player. One of the computer is desktop and connected to router by wire. Another is laptop and is wireless.Bluray is wireless.I want to establish a network (sharing among all these 3 devices) so that i can stream media from both of the computers to the bluray. At the mean time it would be great to be able to share files between 2 computer when needed.I checked it on google, it says creating a homegroup. I did but another computer does not give me option to join the group, it also has option to create.

View 6 Replies View Related

Networking Two Home Computers Using 2 Wire Modem?

Jul 13, 2011

I am trying to establish a home network for an HP laptop running Windows 7 wirelessly to a 2wire modem for file sharing with my Vista PC. My laptop recognizes the 2wire network but Vista won't.Do I need to download drivers or adjust any firewall settings?

View 11 Replies View Related

Wireless Home Networking / File Sharing

Jun 18, 2011

Both computers run xp. Desktop is had wired to router, laptop is wireless.If router is password protected, is the work group I created safe as well?

View 3 Replies View Related

Home Networking - Adding New Wireless Router?

Mar 23, 2012

Home Networking: I would like to add an 802.11n wireless router to an existing Verizon FiOS modem/router. I've read numerous How To articles, but frankly am still uncertain of the best approach. Also, as an aside, would you recommend a single or dual band wireless router? I will have one laptop with a special Centrino Wireless LAN card (3x3).

View 3 Replies View Related

Netgear MCAB1001 Home Networking Options

Aug 27, 2011

I've decided I want to hard wire all my stuff in our family room; however, the modem and router are upstairs in my office. I've got a few options available and wanted to get some opinions from those who have tried any of them. Here are my three options:

1) Install NETGEAR MCAB1001 MoCA Coax-Ethernet Adapter Kits
2) Install Monster PowerNet 300 Power Line Network Modules
3) Run the Ethernet cables through the wall, under carpet, etc.

I'm primarily looking for info about the speed differences, ease of troubleshooting, etc.

View 19 Replies View Related

Networking :: Home Router Firewall Connection With ASA 5505

Oct 25, 2012

Shopping for a new home router/firewall. Trying to decide between a Cisco ASA 5505 or a juniper equivalent. What are everyone's thoughts?

View 16 Replies View Related

Routers / Switches :: Home Networking / Netbook Can't Find Desktop?

Dec 7, 2011

Although we have a moderately wired house with cat6 cables runs in many of the rooms that all end in the basement, I am currently having trouble since I cat stream audio and video files from my desktop in the den to the netbook and receiver in the family room. All computers are hooked up by cable.I have tried a friends advice to plug in the exact IP address of the desktop (and vice versa on the netbook) but still the netbook cat find the desktop nor can the desktop find the netbook. I have tried home sharing in Windows 7 to no avail as I have been prompted to initiate a home network both on the netbook and the desktop when I think it is suppose to be initiated on one machine and same home network joined by the other.DSL Modem --> Linksys WRTGL router running Tomato --> switch -->various rooms (cont.)Family room (one of the various rooms) has a Buffalo WZR-HP-G300NH AirStation (with one USB port) --> 1) netbook and 2) Denon AVR receiver (with network capabilities)I have a switch in the den and the desktop and laptop computers can read off each other through folder/drive sharing even with Kaspersky Internet Security running in the background so I'm sure it's not Kaspersky meddling with my network sharing. If both are on the wireless network, the netbook can access the desktop and vice versa.Is it possible for the netbook to read off the desktop based on my current set up? I can't bring the desktop down as we use them in the den and will not have room for it in the family room. I am not inclined to purchase a stand-alone HTPC at the moment if there is a network sharing

View 2 Replies View Related

2 Apple Airport Extremes - Netgear ADSL Router - How To Setup Home Networking

May 21, 2011

Currently, I have 2 Apple Airport Extremes, and 1 Wireless Netgear ADSL Router. The 2 AAEs are connected separately to the router, and this allows us to get coverage in most part of the house (it's a large house with concrete and granite walls). I also have a HP Officejet 8500 'wireless printer' that is wired to the router as you can only print to the printer when it's in standby with a physical connection to the router (that's a different story). So my goal is to replace everything as the router is slowly dying and as a result of this, I want to be able to access the Internet wirelessly throughout the house, and be able to print from any where in the house without anything connected via cables. And as a bonus, I would like the Internet to be accessible 100 yards/metres down the garden (workshop is there). Basically, blanket coverage!

View 3 Replies View Related

Home Network :: Advanced Home Network Setup (3 Subnets) And Port Forwarding?

Feb 24, 2013

I have a Time Warner Cable business class service with no static IP, with a wireless modem which is plugged to a CAT5 distribution panel. On the jacks (2 other rooms on the house) I have a Linksys E3000 and a Linksys Valet router for signal boost and gadgets usage (TV, cameras, etc).The main router (TWC) has it's own external IP which TWC assigns to me and internally distributes via DHCP the range 192.168.0.x. With that said:

- The E3000 has a 192.168.0.6 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The Valet has a 192.168.0.7 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The main router has the 192.168.0.1 as the gateway and web-interface

Whenever I connect something to the E3000, it is distributing the 192.168.1.x range and the valet 192.168.2.x range.That works perfectly for my home based business until I decided to use more stuff on the network such as a IP printer, IP cameras, etc.

- The IP cameras are connected to the E3000 due to signal strength and I have manually assigned them the 192.168.1.15 and 192.168.1.16 IPs and ports 9001 and 9002.

- The printer is connected to the E3000 and I have manually assigned the IP 192.168.1.30.

Issue 1: Port forwarding On the main router (TWC - UBEE) I have tried to setup a port forwarding by informing the Local IP as 192.168.0.6 (E3000 IP), Internal Port 0, Public Interface IP (0.0.0.0), Ext Start Port 9001, Ext End Port 9001, Protocol - Both, Enabled Yes. On the E3000 I did the same config (screen shot attached e3000.png).This is not working properly. I can't get into the camera.

Issue 2: Printer/ The printer is only accessible if I connect to the E3000 (because it is on the 192.168.1.x network)

Issue 3: How to configure all the devices on the same subnet? If I want everyone to be on the 192.168.0.x network, how to configure properly the E3000 and the Valet? I have tried to force them into the same network but it would not work properly. It would not get an IP from the UBEE router (main).

View 5 Replies View Related

Home Network :: Need To Extend Reach Of Wifi Network At Home

Oct 20, 2011

Here's the layout: Cable modem in the basement. Several devices in which I'd prefer a wired connection in the basement. Upstairs on the 1st and 2nd floor of the house are many devices in which wifi is fine or preferred.Here's the problem: As you might guess, wifi is weak upstairs and certainly on the patio and 2nd floor. I have an access point upstairs that I've experimented with but it is flaky.

View 1 Replies View Related

Home Network :: Install A Wireless Network In Home Environment?

Nov 10, 2011

How to install a wireless network in home environment?

View 6 Replies View Related

Home Network :: Need Input On Network At Home Newly Wired

Jan 14, 2012

I am a new student in networking, taking the CCNA courses, and now want to rewire my home. I currently have a cable modem and E2500 setup running my network. I want to get the modem and router out of my computer room and in the basement where the cable enters the house. I want to do this to clean up the computer room wiring a bit and to run line drops to different rooms in the house where the internet will be utilized.Currently there are two PC's, a laptop, a tablet, sometimes a phone, and an XBOX using the internet. I want to get my printer back up and running on the network but thats another story. Only one PC is currently hardwired. I would like to run two cables into the room with the PC and XBOX that are currently using wireless, at least two into the computer room for the PC and network printer, and one or two into the living room for the blue ray player and possibly an internet tv.

View 1 Replies View Related

Home Network :: Can't Get D-Link DGL-4500 To Accept Home Network?

Sep 10, 2011

I have a D-Link DGL-4500 router and my landlord recently ungraded our internet connection. However, now I get this error message when I try to hook it up to the ethernet hub,"The addressing of the Internet side learnt thru DHCP conflicts with the addressing selected for the LAN side. Internet communications will be disabled until you have changed the LAN side addressing to resolve the problem."

View 3 Replies View Related

Cisco WAN :: EHWIC-3G-HSPA+7 Not Supported In Vrf Setups?

May 8, 2012

we set up a 1941 with c1900-universalk9-mz.SPA.151-4.M3.binand tried to bring up EHWIC-3G-HSPA+7 in the vrf. [code]

View 4 Replies View Related

Cisco WAN :: Controlling Router Via SMS By EHWIC-3G-HSPA

Apr 21, 2013

I need to make some perfomances (like up/down GRE tunnels) on Cisco ISR 2921 by sending SMS. It could be doing by using 3G modem like a Huawei and a server with some expect/SSH-scripts.

But ISR gen.2 has EHWIC-3G modules, which working with GSM networks and they can send/recieve SMS. I think, that it should be an EEM event or some another way to track comming SMS and process it by TCL-script — get a sender number, SMS body and make usefull perfomances on my router (up/down GRE tunnels in my case).

If I done this trick only by using an ISR router and EHWIC-3G module, it will be much more stable scheme in that we dont have extra components (server, modem) potentially may falls.

Unfortunately, there are too low information about configuring this modules (especially, SMS-part) and I dont find usefull for me.

View 2 Replies View Related

Cisco WAN :: HWIC-3G-HSPA - How To Keep 3G Connection Up As Backup

Apr 6, 2011

I have many HWIC-3G-HSPA cards as backup connections and I need to keep them up for monitoring purposes. Being a backup connection they get little interesting traffic for them to spring into life but they are the source interface for a tunnel interface (we use DMVPN). The interface still insists on going down. I have even added static routes to the DMVPN hubs over the cellular interface and they still go down. What command do I enter to always keep them up? I had originally used 'dialer idle-timeout 0' and then removed it altogether which the same results. Below is what I have now.
 
interface Cellular0/1/0 ip address negotiated ip nat outside ip virtual-reassembly in encapsulation ppp dialer in-band dialer string gsmscript dialer-group 1 async mode interactive ppp chap hostname //username// ppp chap password //password//
ppp ipcp dns request
 
access-list 1 permit anydialer-list 1 protocol ip list 1
 
line 0/1/0 exec-timeout 0 0 script dialer gsmscript modem InOut no exec transport input all transport output all rxspeed 7200000 txspeed 5760000

View 1 Replies View Related

Cisco WAN :: Hwic-3g-hspa 1921 Giving Time Out

Jun 15, 2011

I've been using hwic-3g-hspa with 1841 before but now I'm using 1921 and I'm always getting timed-out

View 1 Replies View Related

Dell :: XPS L502x - Possibility To Add HSPA Mini Card

Nov 28, 2012

I have a Dell XPS L502x (Core i7, 6 GB RAM, 2GB NVIDIA graphic card, 750 GB HDD)My laptop does not have HSPA mini card

Is there a possibility to add a HSPA mini card

View 2 Replies View Related

Cisco Wireless :: PCEX-3G-HSPA Searching For Drivers

Oct 11, 2011

I have found in my storage a device: PCEX-3G-HSPA (attached a photo of it)

And wanted to use it, but cant find any drivers for it. My OS is Windows 7 64bit. How to make this device to work under Win 7?

View 1 Replies View Related

Cisco Wireless :: HWIC-3g-HSPA-G Firmware Or Hardware Failing?

Dec 12, 2011

Within the space of a few days we've had 2  HWIC-3G-HSPA-G cards appear to fail on different router models. In each case the sh cell x/x/x hardware output is empty i.e no firmware version or other data provided and the radio status is off. Attempts to force the interface down using the test ....modem-power-cycle or radio-power off get the same error message that the modem is still in reset. Reloading the router does not clear this so we recently tried to update the firmware using the latest version off CCO. The upgrade using the microcode commands failed with an error of "unable to determine the modem state".

View 3 Replies View Related

Dell :: 5530-HSPA-MINI - Getting Error While Downloading Driver

Sep 5, 2012

i have a dell mini 10 that had ubuntu but i put vista on it and after i did it my network controller wont install and i downloaded almost every driver dell had and one worked but i had the 39 error code, the driver that worked was DELL_WIRELESS-5530-HSPA-MINI_A06_R220877 but had 39 error code

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved