i want to transfer files, remote desktop, lan gaming....actualy lan gaming works fine without doing anything just connecting the cable
but how do i transfer files and remote desktop....what software do i need?
note:
pc1 windows 7
pc2 windows xp
I have a new router (ASUS RT-N10)and It is asking me to direct connect my cable modem to my computer, and then find my MAC address via command prompt, and clone it to the new router.I can get to my command prompt, the problem lies in windows 7 and vista's (or mine) inability to realize that my network card is directly connecting to the modem. (No internet connection available, doesn't think anything is connected). I have tried on multiple machines to try and find my modem's mac address but it simply is not working.I want to know if I can find the mac address through the old router, or what I need to do to have windows 7 recognize I'm directly connecting the modem to the PC.
View 3 Replies View RelatedIs it possible to access the internet directly using the provider's hdmi cable routed through a generic device?
View 3 Replies View RelatedI cannot connect my Dell Inspiron 1300 through the NetworkManager "wired" connection, when I try to go direct to the cable modem. It fails to connect. If I connect the cable modem to my (linksys WRT54GS) wireless router, and then connect my laptop to a wired port in the router, it connects in seconds, successfully, This has happened to me 2 other times, when I tried to connect my laptop to a client's cable modem, because my client did not have a wireless router available, in their home. My wireless works fine. This has me perplexed. I'm using Ubuntu 10.04 LTS and NetworkManager Applet 0.8, I've tried some things to see what is going on, such as "ifconfig" "dhclient" as well as modifying the "Auto eth0" parameters and adding my laptop's MAC address, etc.
View 5 Replies View RelatedI have a computer with special software, customer abroad has a Laptop and connect multimedia center via etherner port to this laptop, I want to connect directly to customers ethernet port so I can program that multimedia center using a software in my PC. I know the ip address of multimedia center, but I cannot ping to it then I use hamachi port bridging.
View 1 Replies View RelatedI bought new Lenovo IdeaCentre H430 pc and I'm having problem with high pings. Windows 7 with on-board realtek NIC. Fresh install, fully updated, drivers installed from included CD. When I start pinging router (direct 1Gb ethernet connection, 1 hop), pings start at <1ms (which is fine) and after a while they jump to 300-1000ms.
I loaded up live ubuntu to test if the problem might be in HW. It's not, in ubuntu pings were always <1ms.I also noticed that when I start using connection somehow, pings go down to 1ms, but go back up when I stop using it (tested by accessing live camera feed on LAN).
Power Options set to max performance. I disabled Interrupt Moderation on the NIC, didn't work.I tested it in the safe mode with networking, same problem there.
It slows down our client-server based programs, what's causing it. All I could google up was that disabling Interrupt Moderation would work, it didn't though.Computer is giving high pings to router when idle and normal pings when network is under load, it slows down our software significantly.
The WRP-400 router has two phone ports - does it support direct calls between them?
View 1 Replies View RelatedIs there a difference in an ethernet cable and an Ethernet networking cable? I have an Ethernet cable and a 6 port splitter I am trying to connect. I have 4 ports in the router that are in use. When I connect them to the splitter nothing s working.
View 1 Replies View RelatedI just reinstalled Windows 7 on my computer again and appear to be having trouble connecting to the internet with my ethernet cable. I've only ever used a wired connection on this computer, but am completely unable to do so at the moment.
View 11 Replies View RelatedI am trying to connect my two laptops with one Ethernet cable without any internet to a Network. However, just one of the laptops is identifying the connection, the other doesn't recognize that it has been connected to another laptop. Obviously, the cable itself is working (because one laptop identifies the connection), but what might be the problem that the other laptop doesn't recognize any connections?
View 6 Replies View RelatedI'm trying to connect to the internet via the ethernet cable available in my office at the university but it won't work. I'm able to see other computers connected to the network, share printers and have access to shared files but have no internet access. I know that the problem is not the cable or socket because my old XP computer connects to the internet just fine.
I had a similar problem back at home but I just restarted the modem and was able to connect.
Setup:
Lenovo x220 tablet
Network card: Intel 82579LM Gigabit Network Connection
Currently have two laptops: one is a MacBook using OS X, the other a Gateway PC running Vista Home Edition. A Dell Inspiron 17R notebook running Windows 7 Home Premium is in process of delivery. Current laptops linked on a home Wi-Fi network with AirPort Express router. Anticipated use of new Dell notebook requires its direct connection to Internet outside of current network configuration. Is it possible to have both accesses available in my setup utilizing my one cable high speed service connection? If so, what are the steps needed to accomplish the required setup?
View 1 Replies View RelatedCan I connect WIN98SE to DSL via ethernet cable? I'm trying to upgrade the OS to windows XP from the windows website. But I can't connect to the internet.
View 3 Replies View RelatedFor some reason, i cannot connect to the internet using my current ethernet cable. I am 100% positive that adapter is working fine, as i had maintenance come into my room and check it out, but my computer won't connect to their internet through my cable. [code]
View 4 Replies View RelatedI am trying to connect an hp printer via ethernet cable through our router and I am not able to print from my laptop
View 1 Replies View Relatedi went over to my grandma house and got wireless mouse and the mouse uses a floppy disk to put some sort of wizard wireless network thing on my computer but now i cxan use said floppy disk be cause it broke but ever sence i used that i cant conect to the internet
View 1 Replies View RelatedI have my Xbox and Pc hooked up to a monitor. I want to be able to use both at the same time using only 1 ethernet cable. How do I go about doing this. Will a regular splitter allow me to use both at the same time?
View 2 Replies View Relatedmy laptop has a very annoying habit of disconnecting from the internet, on annoying ass random occasions, the network dropped. When my laptop connected back to the internet again, my pc now says that there is no internet access coming from the cable. I have reset both my laptop and my pc, the router and changed cables. I have also enabled NETBios with TCP on both computers, but nothing.
View 5 Replies View RelatedJust got a new modem and it works fine while connected through an ethernet cord but I can't connect wirelessly. My network doesn't even show up in the list of available networks. I'm using Vista by the way. I've downloaded all drivers that seemed to have something to do with my problem. [code]
View 1 Replies View RelatedAnybody know of a extension cable for this product? D-Link 14dBi Outdoor Direct Antenna (ANT24-1400) I need at least 10-15 feet of extra length.
View 1 Replies View RelatedI have a Netgear wireless router and just set up my wireless network.The only problem is that when I remove the ethernet cable, I lose connection to the internet.My operating system is Vista.In the network connection icon, it shows that I am connected to an unidentified network.Also, on the globe icon it shows that I am connected to the network by local access only. Furthermore, I seem to be missing tabs under the wireless network connection properties section, such as advanced and sharing. I seem to be sending packets but not receiving any.I tried all the basics at this point, including rebooting and powering the modem and router down.
View 1 Replies View RelatedI recently got Fios installed in my home. I believe there is a box the size of a power box in the back room for the Internet.All my other devices (MAC, iPod, Blueray Player) are able to recieve instant and unbelieveable internet connection except for my Dell. I have a Studio XPS Dell computer with windows 7. I plugged in the ethernet cable in the back of my computer and into the "Fios Box" but i didn't recieve any internet. Then i bought a wireless adapter and I do get internet but it disconnects me like every 5 minutes.
View 3 Replies View RelatedI've recently tried to connect my laptop to my modem with the ethernet cable to update the modems firmware but the ethernet lights on the modem isn't blinking and a connection isn't seen on my computer. My laptop is : Vaio VPCEB13FG
EDIT: I think i may have deleted the ethernet driver to reset my drivers but i have no idea how to get the ethernet driver back. Oh yes when I tried the ipconfig in CMD, under Ethernet adapter local area connection i get media diconnected and not much else for that.
So saturday, my friend and i build my computer. Everything worked just fine that day. Sunday i had no problem connecting to the internet. Sunday is also the day i set up a password for my admin account.
Now when i came back from work monday, i tried to log in to my computer. As it appears, i forgot my password... (same i use on everything, so i must have messed up inputting my pass)
So i did a windows reset, since i had no CD or USB to reset my pass. I tried installing windows, and it appears 'this copy of windows is not genuine'. I thought, okay, no prob, as long as i have all options.
Have a Verizon mifi jertpack and direct tv. want to connect direct tv to internet for "on demand" service.
View 1 Replies View RelatedI am in a College dorm and the only access to internet we have is by connecting an Ethernet cable to the connection in the wall and straight to the computer. That is how I have internet as we speak and it works fine. Problem is, that when I plug it in into the xbox it doesnt even connect to the network?
View 1 Replies View RelatedI have an hp G60 series laptop but i have trouble connecting to internet using Ethernet cable
View 5 Replies View RelatedI have just replaced a wbr-1310 with a dir-601. I can connect with an Ethernet cable, but not wireless. I have comcast cable with a Motorola surfboard modem. I was able to connect with the wbr-1310 with this setup.
View 9 Replies View RelatedHave high speed cable and find that the wireless speeds using Speedtest.net are faster than when hooking directly into the E4200. Do I have something set incorrectly?
View 3 Replies View RelatedI can connect to the internet using my neighbors wireless router but when I try to use my ethernet cable it connects me to "network 16" but the internet doesnt work. Ive tried different cables and different wall ports and that didnt work. It has been working before but I disconnected it to go somewhere and when I came back I had this problem. I use Windows 7 and Im trying to connect using Marvell Yukon 88E8057 PCI-E Gigabit Ethernet Controller.
View 8 Replies View Relatedi reformatted my computer 1 month ago, when i try to connect with ethernet cable it doesn't connect, but when i use the usb cable which i got with my modem it connects.btw i have a acer e389 which runs on XP(media center).
View 9 Replies View RelatedIve been using an Ethernet cable to connect to the Internet for a while now, it was working fine up to yesterday where I left my desktop open for a few hours and came back to find that I have no Internet connection.
I used my laptop to test the cable out and it works fine, the wireless works fine too. There doesnt seem to be anything wrong with the modem since I still have Internet on the PS3. I used a different cable to test the modem again with my laptop and I had internet access. The desktop is still connected to the modem but it only gives me a network connection with no Internet.
I tried restarting the modem but it still wouldnt work and I also tried to disable then enable the connection.
Im using Realtek PCIe GBE Family Controller with the latest driver.
i always use to use my ethernet cable to hook up to the internet. now when i plug it in, theres no connection and it doesnt even notice that the cable is plugged in.
View 5 Replies View Related