How To Use Novell Client As ICS Host For Internet Sharing
May 22, 2011
At work my desktop pc is a Novell client with WinXP. I wanted to use it a an ics host so I'd be able to connect my laptop to it with a cross wire so both computers could surf simultaneously using one source connection.I should probably note that I only have user privileges on my desktop and no admin privileges on it. It is my workplace policy so people don't install software that might end up being malicious.We also have Wifi at work but my at my office I have a low signal (1-2 bars) so I can disconnect my desktop, copy it's MAC address to my laptop and surf with my laptop instead. However, I need both computers, the desktop for work and PC for personal use.
View 1 Replies
ADVERTISEMENT
Jan 17, 2013
we have a cisco ASA 5505 and are trying to get the following working:
vpn client (ip 192.168.75.5) - connected to Cisco ASA 5505
the client gets a specific route for an internet address (79.143.218.35 255.255.255.255 192.168.75.1 192.168.75.5 100) when i try to access the url from the client i get a syn sent with netstat when i try the packet tracer from the ASA i see the following:
<Phase>
<id>1</id>
<type>FLOW-LOOKUP</type>
<subtype></subtype>
<result>ALLOW</result>
[code].....
View 5 Replies
View Related
Nov 20, 2012
i have 3 systems. 1 server,2 client(all installed with xp). internet connected to server machine. all systems connected to a switch. Internet sharing is ok but on client machine not loading webpages like facebook or yahoo. The client machine loads [URL] in amazing speed, but not loading any other webpages. I tried disabling the avast antivirus but no use. Server machine loads everything correctly. i am using windows xp in the host file '127.0.0.1 localhost' only cleared the history tested with 3 browsers (IE, chrome, mozilla) Nothing works.. MaxConnectionsPer1_0Server : 8 MaxConnectionsPerServer : 4 In the server machine, i have installed Comodo firewall "ping facebook.com" shows no problem!!(in both server and client)
View 1 Replies
View Related
Aug 2, 2011
I'd like to configure wireless access from winXP to authenticate with our corporate Novell LDAP through ACS
Setup:
WinXP SP3 --> WLC 4402 --> ACS 5.2 --> Novell LDAP
1. Our Novell LDAP server uses secure LDAP (port 636) to authentication user.On ACS 5.2, when we configure this option we need to select Root CA. Should the Root CA in ACS must be the same as the LDAP server's? (the LDAP's certificate issuer)
2. What kind of authentication that this setup supports? Does it support PEAP/MSCHAPv2 as in Windows Zero Configuration or it only supports PEAP-GTC, EAP-FAST, EAP-TLS (which means I have to use Intel Proset/Wireless software to configure).
View 2 Replies
View Related
Mar 21, 2012
I have set up our network with an RV220W as gateway/Wifi-AP,VPN host.I am able to connect over the WWW with the windows 7 client laptops no problem, BUT ,I cannot from my office reach out to the laptops, it seems as if the tunnel is one way.The users can do anything they need, but I want to be able to connect to them to update their AVG or render remote assistance etc.Ping from client to home network no problem.Client laptop is invisible to any ping etc FROM the home network.
View 2 Replies
View Related
Dec 22, 2012
In the past few days I have seen an odd named Client Host "The-Britannic" show up on my DHCP Active IP Table list. There is no device (that I'm aware of) with that name on my network. I delete it but it reappears, and is linked to the same IP (192.168.1.101) and MAC address everytime, so it appears to be a legitimate device. Although it looks like a legitimate device, it's not - so far as I know. I have added the MAC address to the blocked list (internet access / access restriction) to see if I or anyone in-house losese internet connectivity on any. So far, no. Searching various malware and spyware sites turn up nothing.
I realize the IP address is assigned by the router through the automatic DHCP assignement process. I do not broadcast my SSID and have a complex passcode assigned to both the wireless and internal network. Of course, that is no 100% guarentee that someone has not gotten in.I'm running a WRT54GL, all Windows 7 PC's on a home built network. I'll probably change all the passcodes (wireless and Windows Home Network) to see if that disallows access.
View 1 Replies
View Related
Mar 2, 2013
I am a real amateur here. I have configured a cisco VPN server, group and user on an SRP527W, ADSL2+ AnnexA, 802.11n ETSI, 2FXS/1FXO. I can connect from my PC with the Cicso VPN client on it (I get the banner) but I cannot ping into the local network at all. Once I do get in I will be using shares to work on files or VNC to take over a CAD workstation.I am sure I just have not set up something but I don't know where to look. My local network is 192.168.15.***
View 11 Replies
View Related
Dec 16, 2010
I am using a 1811W and CCP for configuration. I am trying to assign client names to devices on the LAN so that when a network scanner is used, the client name is displayed. I have attached part of the running config after a binding has been done. My assumption is that the scanner should now show 192.168.1.109 as name <Supermicro>, but the name is blank. Is this configured correctly for what I am trying to acheive?
View 3 Replies
View Related
Nov 2, 2011
EasyVPN PIX515 server and ASA5505 client?
View 4 Replies
View Related
Feb 10, 2011
I'm just wondering if its possible to ping an IPv4 host using the IPv6 host assuming that the NAT64 has already been implemented?
[code]...
View 2 Replies
View Related
Jun 27, 2011
I have a host that can successfully connect to a PIX 515E (7.x OS) via VPN Client; however, I have no IP routing to the LAN from the remote host.The VPN IP pool works finem,The LAN default gateway is the inside interface on the PIX; the network is flat L2 behind it.The default route on the PIX points out; no other routes are defined,The VPN remote host can be pinged from LAN hosts, but the VPN remote host cannot ping any LAN host, not even the PIX inside interface.
View 2 Replies
View Related
May 7, 2012
ASA 5510
Ver 8.2(5)
I have been looking all over the place for the answer of how to allow clients on an IPSEC VPN to ping from host to host.
View 4 Replies
View Related
Feb 2, 2011
Running a Windows 7 laptop plugged into a LAN using ethernet cable with internet.The built-in wireless nic on the laptop connects to a totally different internet network. I set up an XP Mode Virtual PC on the laptop with the intention that it would use the wireless internet connection.I set this up by installing Microsoft Loopback Adapter, then sharing the wireless nic to it. The Virtual PC is set to use the Microsoft Loopback Adapter as its network connection.My problem is that only the hard wired internet connection works.The wireless is connected and has an ip address, however no traffic flows through it until i either disable the cabled network or physcially unplug the cable. Is it possible to have my host laptop use the cabled internet connection and my virtual pc use the 2nd wireless internet?
View 1 Replies
View Related
Jul 15, 2012
I've got an 1841 router acting as the firewall for a LAN. It also does NAT and acts as the dialer for a PPPoE DSL line to the internet.
All is working fine, except now I need to allow a Tivo device to connect to certain ports on the Tivo servers on the internet. I want only the Tivo to be able to do this. The problem is that NAT is happening before my outbound ACL is checked, so even though I've got rules to allow the Tivo's LAN address out on all ports, it never works. I've verified this using a syslog server, and can see my external DSL IP trying to connect to the Tivo servers and being denied.
I've done things like this at work by NATting the appropriate internal host to its own external static IP address, which allows me to write rules allowing only that external address to do stuff. But I don't have multiple external addresses to work with here.
I tried applying my outbound ACL to the LAN interface of the router in the "in" direction (and removing the same ACL from the Dialer interface in the "out" direction), but that broke other things like the router's own ability to ping out to the LAN or to see a TFTP server on the LAN. I could maybe fix all of that with rule changes and inspect statements on traffic going out toward the LAN (not sure of this, think so), but I'm wondering:
Is there a better way to let just the Tivo makes outgoing connections to certain ports?
Config pasted below:
!
! Last configuration change at 17:15:10 CDT Sun Jul 15 2012
! NVRAM config last updated at 16:27:14 CDT Sun Jul 15 2012 by someguy
!
[Code].....
View 3 Replies
View Related
May 11, 2012
My internet connection started to disconnect after an office mate used my PC. I thought it was just the cables but it's not. I pinged my ip address and its okay (sent=4; received=4). But when i ping Yahoo! and other websites, it said that "Destination host unreachable" (sent=4;received=0;lost=4;100% loss). What should I do to make my connection okay? I didn't ask assistance from our IT personnel bcoz they said if i want to reconnect/reinstall connection, I have to get an approved request from our bosses. And I don't like being asked bcoz they are like tyrant bosses.
View 2 Replies
View Related
Mar 13, 2011
I have an issue with NAT on a Cisco 1841. See following configuration,
interface FastEthernet0/0 description Connection to LAN bandwidth 100000 ip address 10.90.0.100 255.255.0.0 ip helper-address 10.100.2.2 ip helper-address 10.100.2.3 ip load-sharing per-packet ip nbar protocol-discovery ip nat inside ip virtual-reassembly duplex auto speed auto
interface Dialer1 description ADSL connection bandwidth 448 ip address X.X.X.X 255.255.255.248 ip access-group 150 in ip nat outside ip inspect firewall out ip virtual-reassembly encapsulation ppp dialer pool 1 dialer-group 1 no cdp enable ppp authentication chap pap callin ppp chap hostname hostname ppp chap password password ppp pap sent-username hostname password password crypto map vpn
ip nat inside source list 102 interface Dialer1 overload(code )
I've tried this with both a source list NAT statement, and a route-map. The router can contact hosts on the Internet:
Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 128.31.0.51, timeout is 2 seconds:!!!!!Success rate is 100 percent (5/5), round-trip min/avg/max = 144/147/148 ms
View 21 Replies
View Related
Mar 23, 2011
I am trying to open up certain ports to host multiplayer games on the internet on my computer and on Xbox 360.The only internet service provider is primecast. I am able to open the ports on my router but the ports still show closed using portforward.com portchecker. I disabled all firewalls and Anti-Virus, no luck. I even connected my computer directly to the modem, the ports are still closed. The Router is a Linksys WRT400N set to single band. The modem is an Alcatel although there is no model number (it has a fiber optic connection, coax connection and 2 ethernet port connections). The condo is cat 5 ready so the router has multiple ethernet cables which go to the ethernet wall plugs throughout the apartment which is how I connect to my desktop.
FYI:One of the games I am trying to play online IL2 1946, people simply cannot connect.In another game Company of Heroes, people cannot connect and I cannot connect to most games it says there is a NAT issue when connecting.
PS When I go into ipconfig I now see IPv4 and IPv6, I don't know if that has something to do with it but to my knowledge these sections were not here previously (before I moved).
Win 7 x64
Intel I5 750 1186
12 GB Ram
1.5 Tb HDD in Raid Striping
ATI Radeon HD 5770
View 18 Replies
View Related
Mar 5, 2012
I have a VMware workstation on my host computer (windows 7) and the VMware workstation has a virtual machine (windows 7) on the host. We were trying to allow internet access only to the Virtual machine, i.e. to minimize exposure of the host to the internet. I tried to use Vlan Access Control list with MAC ACL to deny the host virtual machine from accessing the internet and allow all other traffic including the virtual machine. The configuration works for some time and after some time when the virtual machine continously pings the c3750 switch (wher the VACL is implemented), the host also pings the c3750 switch and re-establishes connection with the internet. But when we configured the c3750 switch to deny the VM and allow all other traffic, it works fine. It seems like the host automatically finds a way to get arround the VACL.
View 0 Replies
View Related
Apr 24, 2011
I'm working on setting up a new ASA 5550, and have run into a question that I hope is easily answered.I currently have 4 interfaces, SL100 Inside, SL80 DMZ1, SL50 DMZ2, and SL0 Outside. I was under the impression that each interface, depending on security level would pass traffic from higher levels to lower, but not allow traffic being generated from SL80 to SL100.
What I would like to accomplish is that any hosts on my SL100 Inside interface can access the "internet" which is connected to my outside interface of the ASA, which was very simple, just a permit internal subnets eq www / https / etc...
My DMZ subnets need to access a few servers on my internal interface, and need outbound access to the world as well. Thinking that all traffic from my lower SL interfaces on the ASA would be denied, I entered a permit IP / DMZ subnet ------> any. This worked great for giving my DMZ hosts access to the internet, but it also permit traffic from the DMZ to hosts on my Inside interface as well.
View 2 Replies
View Related
Jan 5, 2012
On a 2821 Router with 15.1(3)T1
I have an IPSec VPN and NAT configured. Return traffic from an internal NAT host seems to be blocked by the WAN inbound ACL. What is the proper way to allow return traffic from the Internet for this internat NAT host? Note: As a test, removing the deny entry on the WAN ACL allows return traffic.
View 7 Replies
View Related
Mar 5, 2011
I am trying to connect my ps3 to it via internet sharing from my windows 7 laptop. Now, a different problem, when I try and use LAN, it says, Internet sharing cannot be enabled a LAN connection is already configured with the IP address automatically done, or something like that. What do?
View 4 Replies
View Related
Jan 7, 2011
i want to share internet between a laptop and a desktop.i have no switch or router.by wire i can share file but cant share internet.both pc have win7.
View 3 Replies
View Related
Jan 6, 2012
i ve a problem sharing my wired internet connection.i ve checked the box for internet sharing in my lan properties>sharing.im gettin internet acces for both wired and wireless connections in my host computer.But the other computers which are connected to the wireless network(ad-hoc) are not gettin internet access.
View 11 Replies
View Related
Jun 20, 2011
I have an orange anydata wireless broadband internet, and I am trying to share the internet connection with other hardware. The 'CDMA' internet connection works well from one pc, but, it doesn't show up under networks, so I can't seem to do anything with it. I am running a pc with XP and a laptop with VIsta, both have wireless. I have tried a wireless router, I can get the two machines networked no problem, but, local access only - i.e. no internet.
View 7 Replies
View Related
Aug 30, 2012
So i'm trying for 4 hours to give internet to my PC with windows XP (installing windows 7 not an option) but it seems impossible, i'm getting an error that says:Limited or no connectivity, and the network it's not receiving any packages it's only sending could it be the cable?
View 9 Replies
View Related
May 6, 2011
My current setup is like this:One adsl modem/wireless router with working internet.One adsl modem/wireless router that cannot be configured (cheapo router with hardcoded settings from the ISP), without working internet.I want to use a computer to bridge the internet connectivity from the first router to the second by connecting wirelessly to the first, and wired to the second, so that the second router effectively acts as a wireless signal booster, and any PCs connected to it can also access the internet.I have tried bridging the wireless and wired connections on the PC but it does not appear to work.I don't think ICS is quite what I want, as it seems to be designed for use on a single network. OS on the bridging PC is Win XP.
View 1 Replies
View Related
Dec 21, 2012
I have 2 ADSL modems: Enkon and Siemens. Enkon is connected to a line and it works good (it provides the Internet), but it has a small WiFi range, and Siemens has bigger. I can't connect Siemens directly to a line becouse it's configured to a different ISP. So, I want to use my Enkon modem to "make" and Siemens to transmitt the internet.
View 1 Replies
View Related
Aug 29, 2011
I have a vista laptop connected to internet and a desktop running window XP. I want to make the laptop share its internet connection to the XP desktop but I haven't succeeded. The desktop has 3 Ethernet ports with one showing 3 computer connected together(same on the laptop except has 2 ports). I've tried connecting on all the ports but nothing happened. I googled a lot but the results I found always involved the XP having Internet but not the laptop. The computers cannnot even ping each other.
I did this before but both computer ran Windows XP, so I think it has to do with Vista.
View 2 Replies
View Related
Mar 25, 2011
PC 1 has two CAT5 Lan 10/100 cards while the other PC has 1 CAT5 Lan 10/100 card, so I want the PC with two cards to share internet with the other by a CAT5 crossover cable
PC 1: p4 w/windows 7 32bit
PC 2: p4 dual core w/windows 7 64bit
View 1 Replies
View Related
Jul 26, 2011
I was wondering if I plugged an ethernet cable from my laptop (which has wireless internet) into a nearby computer (which does not have internet) if they would share the internet? i did plug in the ethernet cable, and my computer acquires a network address but has limited or no connectivity
View 3 Replies
View Related
Apr 18, 2012
Uploading keeps switching from ridiculously slow to nonexistent. When it's ridiculously slow, it can take 5-10 minutes to upload a 100kb photo. When it's nonexistent, it basically disables my connection, and the only way to get it back is to reboot. It doesn't seem to matter what website I'm on; anything from uploading a photo to Facebook to trying to attach a file to Gmail does not work. It's definitely computer-specific, because I have a second laptop on the same network that uploads just fine.
[code]...
View 19 Replies
View Related
Sep 26, 2011
Im planning on implementing a forefront tmg on my server, normally id connect the modem straight into the switch but to make sure all the traffic goes through the software firewall ive connected it through the servers integrated nic.So now ive got lan access to the modem and its webgui but no Internet access the ip of the nic is (192.168.0.11,255.255.255.0,192.168.0.10) and the modem is set to 192.168.0.10But again no Internet access is detected and i cant ping the isp's dns servers.Just so you know where im going with this i plan to use a static route and nat (built into forefront tmg) to forward all wan traffic through the integrated nic. Ive already tried to use PPPOE with the above setup and im able to share the internet over the entire network using routing and remote access in server 2008 but installing forefront on top of this configuration isnt supported as forefront takes over routing and remote access with no demand dial support.
View 3 Replies
View Related
Feb 22, 2011
I recently moved my computer from my home to my girl friend's house, and there is a minor problem. The laptop that has win7 already is in a homegroup. For some reason my computer(win7) does not want to connect to their homegroup. But I moved past that. Now I am trying to connect to her computer. She has Win xp. I used the same Ethernet cord from my house that I used to share internet over at her house, and I cannot seem to find out what is wrong. On the win7 it says Unidentified network-No Internet Access, and on the XP it says limited or no connectivity. I set the XP ICS to on (share) for the Ethernet port. The XP has the internet and is using a USB wireless adapter to a router. My computer is way to far from the router and neither can be moved.
Notes: I can share files, but no internet can be passed. XP = Host and Win 7 = Client
View 3 Replies
View Related
