PC 1 has two CAT5 Lan 10/100 cards while the other PC has 1 CAT5 Lan 10/100 card, so I want the PC with two cards to share internet with the other by a CAT5 crossover cable
PC 1: p4 w/windows 7 32bit
PC 2: p4 dual core w/windows 7 64bit
I have one desktop system and one laptop.In desktop i have Internet Broadband. Now i have installed wifi PCi card into Desktop to share internet to my laptop.But there seems some problem i am not able to share internet.
View 9 Replies View RelatedI have an Eee-PC and im trying to connect to the internet via my HUAWEI E173 MOBIEL INTERNET STICKWhen I plug it in it reds it, but only like a mass storage device.
View 3 Replies View RelatedA few weeks ago, i noticed that my desktop was unable to access the internet, even though it shows that it is connected. i eventually decided taht it must have been a hardware issue, so i bought a new motherboard. after installing the motherboard, an a fresh installation on Windows, i saw after the drivers were installed that the same thing was happening. I pinged sites, and i got no losses on data. i also did a tracer, and it showed me that it is in fact connecting.
I noticed that when I connect the pc to the network(it is always via cable) it recognizes the network as "network", whereas if i use the same connection for my laptop, it brings up the network as "NETGEAR", which is, in fact, my network's name.
I have a fee pcs at home...all are able to connect to the internet but theres only one thats not able to...the network and connection centre keeps and changing from identifying to not connected. The cable itself is fine.
View 13 Replies View RelatedI can open files, play videos, run programs, etc. Windows installed without a problem.However, I can't connect to the Internet. At all. I can't even register my version of Windows because I can't contact Microsoft for verification, because the connection won't get through. No Internet devices can be detected.That was with a long cable wired directly to our router, which is next to our modem.So, today, I bought a D-Link Xtreme N Desktop PCI adapter to connect. Still no connection... I don't think the PC even detects the adapter, because the drivers coming with the adapter can't detect it, and the light on the adapter doesn't turn on.That shouldn't happen. Both the cable and adapter go directly into the motherboard. My operating system is Windows 7 Ultimate 64-Bit, and my motherboard is an Asus P8Z68-V PRO.My ISP is Cogeco. All other computers and wireless devices in the house work perfectly fine.
View 2 Replies View RelatedMy acer aspire 4736z can not use anymore internet even tough the wifi icon says its connected. I can use cable. should I download a new wifi adapter? My adapter is Atheros AR928x wireless net work adapter.
View 1 Replies View RelatedI just got a new laptop. Like, just yesterday, but for some odd reason it can't connect to the internet in the living roomMore Info:Laptop bought yesterday. Absolutely new. Samsung, A6 Vision, Windows 7. It can hold to 480GB I think or at least around and has 6GB Ram. I brought it home, made the default brower Google Chrome and connected it to the home internet and entered in the security key/password, so it's all connected. IN the living room, the connection is really good. All the other laptops there -even my really bad old one can connect fine to the internet. My new one says it's connected, but no internet. But since the other ones get internet, I don't think I need to restart the router -although I did so anyways and it didn't work
View 1 Replies View RelatedI just bought a used laptop and everything seems to work fine except the wireless. I sometimes can't find networks that I know are there but this can be fixed sometimes by restarting. The biggest problem I have is the internet speeds are really slow. I'm running on an N router and I am only getting about 100kb/s when my other laptop is getting about 600kb/s to 1mb/s. I have no clue what is wrong. I was thinking of trying to change the wireless card but I don't want to be hasty.
View 6 Replies View RelatedAfter pconfig /renew (I get this error) No operation can be performed on pth while it has its media disconnected. An error occurred while renewing interface local area connect an operation was attempted on something that was not a socket.
I am also trying to wipe it but no not have XP disc and no one I know does either so what is the safest way?
I have the following equipment/software: Acer Aspire One running Windows XP SP3, Artheros AR5007EG wireless network adapter, Realtek RTL8102E PCI NIC, Cisco Linksys E1000 Router.The Wireless Network Connection status says that I'm connected to my network with a full signal strength but I cannot get out to the internet and I cannot ping the router from that computer. I can, however, get to the internet via a wired connection to the router via the Realtek NIC. This has been the only computer that I've been unable to connect to my network and to the internet. It was connected to a different router before and connected easily but that router went bad so I replaced it with the E1000.Don't know if it's the wireless adapter that's bad or something else.
View 1 Replies View RelatedWe have 3 units of computer in our house uses a router and a 8port switch hub. The unit i am using can connect directly to the internet but cannot be mapped in lan. I tried pinging and i already assigned IP addresses in all units but still nothing happen. I already done format and cloned from the other unit.
View 3 Replies View Relatedi bought a netgear for my laptop and when trying to connect to it,i get through the connections to the setup and then it says that it detects a static ip address.
View 1 Replies View RelatedI have a client who has 4 computers in the house all running wireless. 2 desktops and 2 laptops. One of the laptops is running XP and after 5-10 minutes of surfing, the internet stops working while all the other computers retain a good internet connection. Repairing the connection via the taskbar icon fixes it temporarily until the issue reoccurs.
View 10 Replies View RelatedI can connect to the internet using my neighbors wireless router but when I try to use my ethernet cable it connects me to "network 16" but the internet doesnt work. Ive tried different cables and different wall ports and that didnt work. It has been working before but I disconnected it to go somewhere and when I came back I had this problem. I use Windows 7 and Im trying to connect using Marvell Yukon 88E8057 PCI-E Gigabit Ethernet Controller.
View 8 Replies View RelatedI have a Windows 7 based Dell computer and it can connect to the wifi but not the internet. I have 2 android phones and ASUS netbook with Windows 7 Starter that have internet access.I've tried the netsh commands as admin. I did download Xirrus WiFi Inspector but it tells me nothing new. I've tried drivers. I did a system restore to a point prior to updates and it worked fine until I installed the new updates. These are my results from the ipconfig command:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersWhatAJoy>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : OwlAlwaysLoveU
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid[code].....
WOke up this morning and my desktop will connect to the router via LAN and WLAN, but states that there is no external internet connectivty.I know this isn't the case as my MAC will connect via WLAN and LAN (same ethernet cable) and I can access external sites. My router is therefore working correctly and my internet connection is fine.I presume this must be some kind of driver issue, but it states that my drivers are installed, up to date and working correctly
View 11 Replies View RelatedIt is a Dell Inspiron using Windows 7 and the internet has suddenly stopped working on it. It is able to connect to the router fine and says it has a connection but is unable to access anything. And this is accessing the router either wirelessly or wired through an ethernet cable. I know that it is not the router because her roommates are able to access the internet fine and her computer is also unable to access the internet from other networks. Is it possible that the network card in her laptop has died and needs to be replaced? or could it be a corrupted driver? Would using a usb network adapter be a temporary fix? I have searched many forums trying to find an answer but have been unable to.Also a couple times when attempting to see if the wired connection worked I had plugged in the ethernet cable and was able to access google for 5 seconds and then it stopped working, and then unplugging and reconnecting would yield the same results
View 3 Replies View RelatedMy sister has just purchased a custom built desktop computer that will not connect to the household network. We have various other computers and devices that connect to the router (Thompson Gateway TG782T) without any problems. Just to be sure I've tried reseting the router to factory settings to no avail.
I've tried connecting her computer to the network through the TP-Link Wireless Adpater (TL-WN881ND) that came with her computer AND through a Netgear Wireless USB Adapter (WG111v2). In both situations the network is detected, the network password is requested (and accepted) but the result is always that she has 'limited connectivity', cannot access the internet and cannot detect any shared network drives.
I've tried connecting with an Ethernet cable as well, which her computer does not detect at all ('network cable unplugged').When I try to troubleshoot any of these problems I get a message that says 'The Diagnostics Policy Service is not running'.The guys at the shop where my sister had it built are asking her to bring the computer in with the router becuse they are convinced that the machine is fine, and that the router is at fault. Some Specs for her computer
-------------------
Windows 7 Professional
Service Pack 1
Processor: Intel(R) Core(TM) i-7-3770 CPU @3.40GHz 3.90 GHz
RAM: 16.0 GB[code]....
i reformatted my computer 1 month ago, when i try to connect with ethernet cable it doesn't connect, but when i use the usb cable which i got with my modem it connects.btw i have a acer e389 which runs on XP(media center).
View 9 Replies View RelatedIve been using an Ethernet cable to connect to the Internet for a while now, it was working fine up to yesterday where I left my desktop open for a few hours and came back to find that I have no Internet connection.
I used my laptop to test the cable out and it works fine, the wireless works fine too. There doesnt seem to be anything wrong with the modem since I still have Internet on the PS3. I used a different cable to test the modem again with my laptop and I had internet access. The desktop is still connected to the modem but it only gives me a network connection with no Internet.
I tried restarting the modem but it still wouldnt work and I also tried to disable then enable the connection.
Im using Realtek PCIe GBE Family Controller with the latest driver.
I have a 4 computer MS LAN connected to a router that is connected to a ISP disk outside the house and all computers have internet access. I now want a redundant backup on connecting to the Internet. I have a Wild Blue Internet Disk outside the house that we used to use.Can I install another LAN card and just have that connected to Wild Blue?
View 1 Replies View RelatedWe put an addition onto our house about 7 years ago and ran Cat5 throughout it. Now when I talked to the electrician about how to route our internet through it, he said the Cat5 with RJ45 connectors was set-up for phone, not internet. I was looking around the house and could not find a rack or central location to plug a modem into. We have RJ11 ports in each of the wall sockets so I am slightly confused.Is there a way to switch these connectors over to use for internet instead of phone? How would I hook up my modem to these ethernet ports? My plan would be to hook up two wireless routers from these ethernet ports.This problem comes to be because our house is solid plaster walls covered with bookshelves and the router (a nice wireless-n) does not even penetrate half the house.
View 4 Replies View RelatedI was having a problem with my computer so I did a system restore to fix it.It failed the first time. I also disabled my anti virus first. I tried in safe mode and it worked. So obviously something stopped it from working though I'm not sure. Anyway when I logged back into my account my wireless connection said I had no Internet access and the troubleshooter said the dns server isn't responding. I don't know how to fix it. I've tried updating the driver, uninstalling/reinstalling the adapter, enabling/disabling it, connecting/disconnecting from the connection, trying the connection in another account as well as safe mode and nothing has worked.
View 3 Replies View RelatedI'm having to use my desktop because my laptop(Toshiba Sattelite...runs on Windows 7) now has NO CONNECTIVITY. It goes from "Limited" to "No" connectivity. I have it hooked directly up the router now and NOTHING. I'm not sure of what to do. The command prompt doesn't work. I typed "ipconfig /all" then the next command was "ipconfig /release" and I got three lines of errors. DHCP is enabled only under the "I-E NIC" Everywhere else it is not enabled. When I hover my mouse over the bars at the far right of the status bar it says my wifi name and under it says "no internet access," HOWEVER, when I click on it...my wifi name is at the top and it says in bold letters CONNECTED.
View 1 Replies View RelatedI have my PC connected to the internet by way of a USB WiFi dongle, tapping into the neighbours internet access (with permission).Obviously, this leaves my RJ45 Ethernet connection on the PC, free and unused.I have a CCTV system also, which, if to get the most out of it, requires an internet connection via RJ45 Ethernet.Is it possible to allow my CCTV system access to the internet via Ethernet, connected to my PC, and then using the WiFi dongle access which the PC is already using, also?If so, how would one do this, after physically connecting the Ethernet cable between the PC and the CCTV system DVR?
View 1 Replies View RelatedI am unable to connect to the internet through my wireless router. However, I can connect using neighbor's wireless connection and other laptops in my home are able to connect to the internet using MY wireless connection. The problem started suddenly, I used to be able to connect, then I had the problem so I rebooted and that resolved the issue temporarily. I tried disabling the wireless adapter card then rebooting, this did not work. I also unchecked the TCP/IPv6.
View 4 Replies View RelatedI bought I router today, Linksys E2500 and set it up, for some reason its connected with full strength but the internet does not work on my computer, or any other device connected to the network I established on the router.the interenet still is not working. The modem is fine, as when I disable the wireless connection, the internet works. Yes, I have Sp3 installed.
[code]...
My Windows Server 2008 r8 has 2 network card
1st card I have connected to Internet Router
2nd card I have set up the LAN to access the database application from server with 2 clients.
Question
1) Currently 2 clients can't access the internet
2) How to setup the 2 clients to be able to access to internet?
[code]....
I've been trying for two weeks now to connect to the internet but can't. This suddenly happened on a Monday after I got home from work. Up until that point, I have had no problems. At first I thought it was my cable, but when I plug the cable into my brother's PC, it works. Then thinking it could be my network card, he picked up a wireless card for me, but still no go. I've searched these forums and many forums over the internet and tried many things but I still have no luck. I've scanned for viruses and malware but nothing has turned up.
I have Norton anti virus but installed Adaware per recommendation to double check. I also used Malware Bytes. On Xirrus, I clicked the ping test and everything showed as pass but still, low connectivity. I get that even when I plug in the cable. When I look at my connection status under activity, the bytes sent and received are in the low thousands.I have only a very basic understanding of networks. [code]....
I have 3 computers wired to a Netgear R6300. Two of those computers (both running XP SP 3) I added new LAN Gigabit Cards (Tenda TEL9901G) . One recognized the card right away and had no issue connecting to the Internet (using this computer now). The other shows a 1.0 Gbps connection but I can not get any web pages to come up. I can access other computers and devices on the network without an issue on the computer that doesn't connect to the Internet.
If I type in the web address it says "Server Not Found." If I type in the IP address it will come up with the name of the site in the address bar but it still says "Server Not Found." I've tried several times to unplug the router and modem (Motorola Surfboard) and restart everything but the problem was still there. Also, I tried other Ethernet cables and no change. The LAN card drivers are up to date but I don't think the card is the issue since I swapped the new cards (to see if the card was the problem) and it does show a 1.0 Gbps connection. Also, tried uninstall/reinstall, disable/enable the card many times.I didn't change any setting in the router after installing the cards.Here is the ipconfig output:
Windows IP Configuration
Host Name . . . . . . . . . . . . : GATEWAY
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Mixed
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No[code]......
Wireless internet isn't working. The drivers aren't installed, and it never came with a cd so the only way I can install them is if i connect to the internet which i cant. I am thinking i need to download the drivers to a disk drive and then transfer them. Another possibility is, i somehow have a rogue virus on my computer ( probably julia who ruins everything )anyways it's called pc optimizer pro. I don't have an internet so i cant get any programs, but i got hijack this and TFC malware bytes and zone alarm security already on my computer.
View 1 Replies View RelatedMy acer aspire 4736z can not use anymore internet even tough the wifi icon says its connected. I can use cable. should I download a new wifi adapter? My adapter is Atheros AR928x wireless net work adapter
View 1 Replies View Related