Laptop Will Not Connect To Building's Router
Sep 30, 2012
I have Windows 7 with an Intel Centrino Advanced-N 6200 Network Adapter. It can be picky about what routers it connects to but usually it stops being stubborn after a few minutes. Now it won't connect to my building's internet (while my other computer and devices can). My laptop can access any other wifi and internet. Sometimes it can connect to the WIFI but gets no internet and sometimes I cannot connect to the WiFi at all.
1. Sometimes I'm able to connect to router and just not have internet. Sometimes I can't connect at all.
2. I deleted network profile multiple times. Made no difference.
3. Disabled network adapter and re-enabled - Didn't work
4. Updated Net Adapt driver. - Nope
5. Anytime I connect to router the security is set incorrectly to WEP. Troubleshooting tells me to adjust this which I did to WPA2-Personal. Still still couldn't access internet.
6. Tried to ipconfig /renew and ipconfig /release in cmd but says "no operation can be performed on wireless network connection while it has its media disconnected" - so nope
7. Tried a se[erate USB network adapter - No difference. This actually surprised me, I figured it must be my Intel 6200 but alas it isn't.
My biggest hurdle is I cannot access the router. I have to figure this out on my laptop and I have no Ethernet chord ability either. Every forum post I read about wifi issues people always tinker with their router and it fixes it.
View 3 Replies
ADVERTISEMENT
Jan 16, 2013
Alright, so I have a Dell xps 12 running windows 8.On my school's campus, there are two wifi options. One is secure with a login, the other is unsecured but with a Web login. Normally I connect to the secure one and have no problem.
However, in one building I've encountered issues connecting. My computer will pick up the signal for both options (and says there is strong signal) , then try to connect to the secure one. It will say "connection is taking longer than usual" and then fail to connect, then say no networks available. I tried resetting the network adapters and it picks up the signal again for a moment, try to connect, and then same problem again.
I can see other people in the room connected to the Internet with no issue. My phone also connects with no problems, and has full signal. I have no idea why my computer won't connect.
View 14 Replies
View Related
Jan 14, 2013
We had 2 laptops and a pc working through a router with no internet problems. My wife's Toshiba laptop had other problems so IT guy at the college where I teach did a clean install of XP and checked the machine in his office, including internet. No problem. Brought machine home and no internet connection. My laptop works fine on wife's cable to the router. Wife's Toshiba has wireless but cannot establish connection with wire.Another tech guy who lives above us took the laptop up to his place - no connection. Back in the office (different building)- connection. The IT men are baffled. Me too.
View 5 Replies
View Related
Dec 12, 2012
I have a project where I need to connect two building using a wireless bridge.I cisco specialist told me to purchase two 3500 (AIR-CAP3502P-A-K9) access points and an external antennas.The problem I have is these access points will need something to control them. If the access points will be in separate buildings will I need a controller on either side of the bridge to get them to work?What other cisco AP device capable of 300Mps dual band that are autonomous and can bridge between two buildings that are a 50 yards apart?
View 3 Replies
View Related
May 1, 2012
internet provided to whole building with connections in every room -> personal router in my room -> my PCs, Macs & printer, how to set up my computers so that they can share files with each other and print to my network printer, but without being susceptible to being accessed from other computers in the building? I have my own netgear router. But at the moment, my shared folders are accessible by everyone in the building, so is my printer If I set all the computers to automatically set ip by DHCP, they can access the net, but everyone in the building can access them (and my printer which requires a manual ip doesnt work). If I set all the computers to manual addresses (e.g. 192.168.1.14 ... 192.168.1.15 ... 192.168.1.16 etc.) they work with each other, the printer works, its secure, but I can't access the internet!Is there a way to for example have my own internal network with manual ip addresses, while also being able to connect to the net?
View 1 Replies
View Related
Mar 20, 2012
I live in a new apartment building which means a lot of concrete. The internet (fiber) enters the house at the beginning where the modem is hooked up to my Linksys WRT320N. From there two cables run through the house:1 to the home office, where two computers are connected through a switch.1 to the living room, where the Xbox, blue-ray player are connected through a switch.I also have a wifi network running from my WRT320N, but as it is at the beginning of the house, there are some black spots in other parts of the house. I tried to fix this with a Netgear repeater, but that keeps disconnecting.
What I want to do know is place a second linksys device in the living room at the end of the already existing cable that will also broadcast a wifi network, but I want this to be exactly the same Wi-Fi network as I already have. What I want to achieve is that I can walk from one end of the house with my iPad, streaming a video, to the other end of the house and that I always stay connected to the internet and that my tabled just picks up the strongest broadcaster, basically the same as with a mobile phone.
View 1 Replies
View Related
Apr 24, 2012
I have in one building a computer which has a real ip using and i want to connect to that building not via teamviewer or bomgar i wish to use VPN, how do i configure it? And why it is better using VPN?
View 2 Replies
View Related
Jan 30, 2011
Alright, My laptop (MSI) won't connect to my router, it used to connect, but I tracked it as intruder to stop my kids from getting on, and when I stopped tracking it as an intruder it wouldn't work at all, same with the computer in my kids room. It will connect to other networks, but not mine. I use network magic.
View 4 Replies
View Related
Jan 26, 2012
I have an HP laptop and a N600 NetGear Dual Band router. I hooked up the router and was able to connect to 3 computers. However my husband's laptop we were unable to connect it to the router. When we went into the Connectivity utility on his computer, we found the router and clicked on it. We attempted to put the password that was set by NetGear. However when I went to type in the password, it didn't allow me to type anything. It was as if the keyboard was locked.
Or is the router too "new" for this Laptop? The Windows systems is Xp Professional. Otherwise I may have to return it. We have an older NetGear router that it connects to with no problems.
View 1 Replies
View Related
Dec 27, 2011
I recently got a new router, the belkin with n600 db with F9K1102 v1 firmware.i upgraded from my old belkin router to this due to more wireless items in the house and for some reason i cannot get my HP G72 laptop to connect to it, and this isnt the first time i had issues with this laptop. the first issue was that if im more than say 10ft away from the router device my laptop would not connect, but if i was next to it it would work fine.now i can not seem to connect to this new router at all, i can pick it up, just it wont connect.. wirelessly it wont connect, but wired it'll work just fine.i get an error saying i could not be connected, and its going to troubleshoot then it just says it can not resolve my connectivity issues my wired desktop works.
View 1 Replies
View Related
Nov 23, 2012
i am trying to connect my new laptop to my router and it is asking for my security key
View 1 Replies
View Related
Sep 1, 2011
I bought a DIR-655 router and am able to access the internet using my desktop PC just fine... But the problem is I can't get my laptop to connect through the router and i couldn't access the internet.. I always get the message "unable to connect to the internet" or the" limited or no connectivity". Am i missing something with the router's configurations?
View 2 Replies
View Related
Jul 20, 2011
My Dell won't connect to my router, it will connect to other routers but I have always had problems connecting to my router at home. My Wireless card isn't turned off...and other devices like my PS3 and Ipod will connect to my router, my laptop is the only thing I can't get to connect.
View 2 Replies
View Related
Jun 30, 2011
I am trying to develop a firewall from scratch in linux environment using C. Actually its more of a Unified Threat Management sysytem .which features to include like antispam, content filtering, vulnerability analyzing,etc.I have exactly 1 year to complete this project which features can be coded completely in time. Actually I have broken the process of development in 4 stages namely :
1. Capture the packet (using libcap)
2. Break the packet into headers and data (using libpcap)
3. Analyze the headers and data and make a decision
4. ACCEPT or DROP the packet
Its the third step that will depend on the features which are included in the project. I plan to code using the UNIX Socket API.
View 1 Replies
View Related
Mar 25, 2013
I have a 4g home system from verizon in my house with a wireless roughter all works. Are printers are on the network. I have run a cat5 underground eithernet cable to a poll barn that is about 200 feet from my house. (the house network will not reach that far). My wife wants her barn to be wi fi (she does not want to plug in to the wall of the barn. I was told I need a Hub. but i am not sure what i need.The idea is she could print to the printer in the house or in the barn so i want all to be on one network.
View 3 Replies
View Related
May 10, 2012
This lab teaches the application performance of two different networkarchitectures: Daisy Chain and Collapsed Backbone Network. The bookshows a collapsed backbone data network in which there is a core switch inthe basement equipment room. The core switch is linked directly to aworkgroup switch on each floor. Another option is to link the switches in adaisy chain. In this approach, the basement core switch is linked directly tothe first floor switch, the first floor switch is linked directly to the second floorswitch, and so forth.This lab shows the application latency introduced by connecting buildingswitches in different ways.
OverviewOperations building has 10 floors, each havingmany users connected to a 10Base-T workgroup switch in the telecommunications closet. The users share an Oracle server and seven fileand print servers in the basement.In Scenario 1, the switches on each floor are daisy chained to the core switchin the basement. We will see that this daisy chain approach introduces highapplication latency to users on the highest floor.In Scenario 2, the daisy chain topology is retained, but the core switch ismoved to the fifth floor. We will see that this reduces latency on the highestfloor but increases it on the bottom floor.In Scenario 3, the core switch is kept in the basement, but ollapsedbackbonetopology is used, in which the core switch in the basement is linked directly to the workgroup switch on each floor.
Several users are connected to a switch on each of the 10 floors. The share an Oracle server and 7 File, Print, and Email servers in the basement.The users on different floors are running a 2 Tier Oracle application. We willstudy the performance of this application.And showed me the error message in pictures (3) I asked the doctor and she told me to change the Switch name (located in the red box in picture) but still error constant I think the error is due to the type of Switch (core switch) or the type of link between the (core switch) and (7 File Print & Email Ervers)
View 1 Replies
View Related
Mar 25, 2012
I have to propose/design a network system. It has 350 computer terminals/workstations out of which 300 of them are divided into two separate networks while the other 50 are to be on another network. So I assume I'd need 3 networks (or LANs) I guess (all connected ofcourse)So far I've inferred it needs a mail server, a file server, a print server, a DHCP server to assign IP addresses (C class and private ones ofcourse) and a web proxy server. Also I thought a fast Ethernet LAN network might be ideal here but I'm not quite sure on that (nor have I ascertained what sort of topology or hardware to use).
View 5 Replies
View Related
Jan 26, 2012
I need to generate an ODBC connection to the upm Datasource on LMS 4.1 running on Win2K8. I have successfully built connections to cmf, ipm and rmeng, however UPM keeps failing saying that the Database is not found.
Here are my settings.
Driver = CiscoWorks Embedded Database
ODBC Tab - Data source name = upm
ODBC Tab - Description = Device Performance
Login Tab - Supply user ID and Password is selcted
Login Tab - User ID = lmsdatafeed (i have tried DBA as well)
Login Tab - Password = set using the password I estabplished with the dbaccess.pl and dbpasswd.pl scripts
Database.Server name = upmEng
Network.TCP/IP = HOST=<lms server ip>;DOBROADCAST=NO;ServerPort= 43800
I validated the server port using netstat -a -b -o and matching up the PID with the UPMDBEngine process shown in the LMS Manage Processes window.Windows firewalls on the remote machine and the LMS server are off.
View 3 Replies
View Related
Aug 18, 2011
Toshiba laptop will not connect to wireless router. Toshiba laptop was working on wireless network yesterday.New modem/router installed today. Laptop will not connect.It finds the network but will not connect, stating time out has occurred.All other computers in house are connecting to network with no problem. Running Windows Vista. Have rebooted modem, rebooted computer.Even plugged computer in directly to modem and it connects fine but will not connect wirelessly.
View 1 Replies
View Related
Jul 25, 2012
After being away for a week, I return home to find my laptop unable to connect to the Internet. It seems the router has been reset (as the router name has returned to its original). My laptop can recognise the router, it shows 5 bars signal strength but will not connect. I know the password is correct as my iPhone can connect. I am not too knowledgeable about these thingsI have tried deleting all saved networks and re-booting. I had no problem connecting a week ago.
View 17 Replies
View Related
Mar 14, 2011
Im having trouble connecting to a wireless router. It shows up as an in range router but when I try and connect after entering my wpa password it just acts like it's going to connect but then never does. Doesn't even attempt to aquire an ip. I attached my computer directly to the netgear router and that worked fine but still no wireless!! My computer is a dell running windows xp service pack 3
View 3 Replies
View Related
Sep 27, 2011
After finally getting my wireless and wired routers to play nice together, I now find that my laptop won't connect. I know the wireless router is working fine, because my hp touchpad connects no problem.Lap is a dell inspiron m5030 with windows7 x64 on it.It's brand new, but I removed the dell stuff and installed win7 ultimate, as I already owned it. (and I have a thing about stuff that comes bundled...don't like...but it came that way.)I have all the drivers installed but I can't seem to even see my router.
View 14 Replies
View Related
May 11, 2012
Since recently I am no longer able to connect to my router from one of my laptops. The connection is failing wireless as well as by cable. My other two laptops are having no problem at all so I think it is a problem with the laptop.I check other posts and found I could do a TCP/IP reset so I have done that.If have executed these commands on a elevated command line:
- netsh winsock reset catalog
- netsh int ipv4 reset reset.log
- netsh int ipv6 reset reset.log
I have restared the laptop afterwards but the problem remains: I am unable to connect to the router.This is the output of the "ipconfig /all" command (command is ran while I've had only the adapter with the cable enabled, wireless adapter was disabled): [code]
View 9 Replies
View Related
Nov 14, 2012
I just move to a new place and find out only me can't connect to the wireless router.This laptop can connect to other wireless routers but not this one.My other laptop and cellpone can connect to the router successfully(so I'm sure the code is right, and the router dosen't set any MAC filter).I've tried to reinstall the driver of my wireless card, and still not work.
View 1 Replies
View Related
Aug 15, 2011
how can I connect my laptop to anyone's wireless router to use their internet.
View 1 Replies
View Related
Jan 4, 2013
I built a desktop to replace my laptop and set it aside for two weeks. So I go back to the laptop and it says the networks available but I can't connect to the router. It reminds of the first time I wired a network at work. All the wireless info seems to be right I went to my RT-nu Asus router and reset that. That seems to be OK. DCHP is OK password for the WPA seems OK. I did upgrade the firmware to the router but that worked ok. That won't have affected the laptop in anyway would it? I do have a preprogram of WIN 8 but its not telling I have to buy it yet. Whoa, how could it if I can't get on the net. Do you think that might be it? Everything on the laptop works well otherwise and it's not informing to but Win 8.
View 1 Replies
View Related
Jun 17, 2011
my laptop can never connect to the internet when a router is set to WPA. it can connect to the network but it wont let me use the internet. but if i change the router to WEP it will connect but i dont want to use WEP. i dont know whats wrong with my laptop and why it doesnt work with WPA. its a belkin router by the way
View 11 Replies
View Related
Jan 29, 2013
My laptop wont connect to the internet, it dosent even show my provider to connect with, however it works fine when connected by eternet cable to my router..
View 2 Replies
View Related
Dec 8, 2012
My LAN PC is connected with the router through wire. My laptop is wireless which is connected to the modem. I want to acces the file from the wired PC to wireless Laptop. Both are connected with router.My PC ip is 192. 168.1.205My laptop ip is 192.168.1. 204My router static ip is 192.168.1.136How to connect the LAN Pc from wireless LAptop through Modem.
View 3 Replies
View Related
Feb 12, 2011
How can I connect my laptop to my printer through my router?
View 1 Replies
View Related
Sep 20, 2011
How can I connect my laptop to my main pc?
View 1 Replies
View Related
Jan 5, 2012
How can i connect to the router using laptop with windows 7 ,through console cable??
View 2 Replies
View Related
Nov 24, 2012
have a new netgear router my other lap top will connect to the internet but my vista lap top will not,,,its wireless....not sure what is going on ,,,feel like i tried everything
View 2 Replies
View Related
