Linksys Cable / DSL :: WAG320N - How To Get Network Storage Thing To Work
Apr 8, 2010
I recently purchased a WAG320N, primarily for the faster networking speeds and the ability to attach a USB hard drive to my network.The only problem is that I have little idea how I get this network storage thing to work. Cisco haven't really supplied any documentation on how to work this.So far I've plugged in a hard drive and formatted it through the router's web interface, with no trouble at all.But, after doing this I have no idea how to access my hard drive on the network.I would assume that it would appear automatically on my network for me to access freely.
View 9 Replies
ADVERTISEMENT
Apr 9, 2011
How does the storage work with a WAG320N device via USB if I am using a Ubuntu 10.04/10.10 et al?
Does it look like an FTP site or can I just use it as a shared folder accessible though the normal folder directory structure from any machine on the network.
View 2 Replies
View Related
Jan 14, 2012
I do not have a "storage" tab in my setup screen. I have Setup, Security, Wireless, etc. According to its manual there must be a Storage tab between security and wireless. Mine doesn't have it. USB drive is connected and I see "mywag320n" on the network but I can't access it because it requires login and password (which I guess I must set up from Storage tab )
View 8 Replies
View Related
Nov 8, 2011
I recently purchased a WAG320N router and have issues with access restrictions. Internet is shut down regardless of the time set with the policy or policies. I am using firmware version V1.00.12. Tried rebooting router, restoring factory defaults & restarting IMAC to no avail. Timezone checked and OK.
View 5 Replies
View Related
Dec 31, 2012
This will work, the Netgear I have does this seamlessly, how do I set this up as I cant find any info in the manuals/online help.
View 1 Replies
View Related
Dec 3, 2011
I found that if the WAG320N remain "on" during the night the day after will no longer work. It need to stay "off" for one day and than is starting to work again till another working's night! Why?
View 1 Replies
View Related
Nov 15, 2010
I have been playing with multicasting on my home network and have hit a problem in that all multicast messages seem to be spewing out over the WIFI regardless of whether there any any subscribers present or not which is swamping all other WIFI traffic. The wired LAN seems to be behaving just fine (no traffic on the wired network if no subscribers present).
how do I filter the multicast messages so that they are not sent out over the WIFI (unless a WIFI subscriber is present)? I have tried enabling the IGMP proxy but it makes no difference. I've tried messing with lots of other parameters too but no joy. Does multicast filtering actually work (or exist) on the WAG320N?
View 7 Replies
View Related
Feb 24, 2011
my device can connect to the wireless network. When i tried to setup the network again it says that no WLAN network found. I have not change any of the setting in the modem it just can't find any WLAN network. I have tried reseting the modem but still no network found.
View 4 Replies
View Related
Jan 11, 2012
I have a little problem with this modem / router WAG320NFrom 6 months now no problem, perfect.For a week now appears that wifi losing signal every 4 / 5 hours:Internet has no problem and the PC connected via Ethernet goes smoothly, while the wi-fi stuff (iphone,ipad,notebook) no longer see the network, but the lights on the modem (including wi-fi) are all green as they should be.To resolve this problem I turn off and on again and the wi-fi again be recognized and work fine for other 4 / 5 hours.i have the latest available firmware and settings areBand 2.4Ghz Mode B / G / N MixedLarge 40-MHz channel width,Wide channel 9 2452 GhzStandard.
View 2 Replies
View Related
Apr 18, 2011
I am having a problem with copying files onto my Storage device Connected to my WAG320N, the router is up to date with the latest updates and has been reset in an attempt to overcome this problem. I currently have attached a 2TB Seagate External Hard drive plugged directly into the router formatted in NTFS, and using Windows 7 Bit to access the Routers Webpage and the External Drive.
I am able to set up permissions and access control all okay, so some users can see some folders or have access in Read only or Read and Write Permissions, however I have been using the Admin account when accessing the drive which has Read and Write permissions to all Folders on the Drive. I can create a new document on the Drive (Right click > New > .Docx or .txt) and save file successfully and can view from other computers from the network, however I cannot Copy from any of the computers to the Network drive (e.g.. Copy .txt file from Computer to Network drive), I get the Windows Transfer Dialog and it Calculates Transfer Rate for a while before telling me it's unable to and that I can either select Try Again which comes up with the same error message, or Cancel the transfer.The reason why I want to be able to Copy files to the Network Drive is so I can centralise all the Photos, Videos and other files and documents to be shared to all computers on the network.
View 1 Replies
View Related
Feb 5, 2011
I'm having big problems with my Linksys WAG320N. I'm pretty clueless when it comes to networking.Without changing any of the settings, the other day my Macbook Pro couldn't connect and it kept saying 'Connection timeout'. From that point my iPhone also refused to connect, although accessing the internet on my MBP via Ethernet was fine.
I did a hard reset following instructions from this forum then re-configured with the installation CD. The wireless LED on the router was lit but my MBP couldn't see the network. Eventually I managed to connect after rebooting my laptop, and enjoyed all of 10 minutes of problem-free of wireless internet connectivity before the network just dropped out and now doesn't show up in my list of networks again, although the wireless LED is still on. Connecting via Ethernet still works, just not via wireless.I've rebooted my laptop and the router and tried switching channels on the router, all to no avail.
View 9 Replies
View Related
Jun 4, 2010
some reference material about configuring my WAG320N to use my cable modem via Ethernet port 1. I've seen it mentioned that's its possible, however I've been unable to sort it out myself.
And before you ask, I've brought the DSL router as I'm moving in the next 12 months and my new base will not have access to cable internet and I'll be reverting back to DSL.
View 8 Replies
View Related
Jul 31, 2011
I recently bought the WAG320N can I block Peer to Peer file sharing on my Network?
View 3 Replies
View Related
Jul 17, 2011
I have a WAG320n and I wish to use it as a modem only so that I can use an Airport Extreme as my wireless router. how to configure the WAG320n so that it can be used in this configuration?
View 1 Replies
View Related
Mar 2, 2011
how to configure or set up VPN on WAG320N?
View 3 Replies
View Related
Aug 27, 2012
I have an intermittent issue with a new WAG320N.Device is new (installed for 1 month now) and is running the latest firmware "out of the box".
Device was confirmed as working (recommended) via the ISP, as it uses a Broadcom chipset, so it works "more reliably" with the ISP's hardware which uses the same chipset.
Setup was painless and the router synced up fine and has been operating for a few weeks. However, twice in the past week the router has become unresponsive to ping over the LAN. Furthermore, the device's lights indicate everything is OK, however I have to reset the router (power cycle) and then it returns to normal.
WIFI is OFF. LAN IP is set manually, DHCP is OFF. The router is plugged into it's own UPS.
View 1 Replies
View Related
Mar 6, 2012
How to configure settings for router E4200I live in Finland and bought new Cisco Linksys WAG320n router modem as I am experienced Cisco user. However after spending several hours and setups on the WAG320n router I cannot get it to connect on the ISP ADSL line.
RFC2684 Bridged
LLC/SNAP
g.dmt or ADSL2+
VPI 0
VCI 100
But once I setup these or acutally any other setting I cannot get the router to connect. With the right settings I can get the DSL PVC status up and connected but the ModemRouter cannot connect and retrieve IP-address from ISP.
View 7 Replies
View Related
Sep 4, 2012
I'm trying to play some online games and my WAG320N does not forward ports, upnp does not function and to top it off DMZ wont even work (not a software firewall issue either). I have the latest firmware (and honestly the stock firmware is terrible).
Am I out of luck or is there something I can do to fix this? I sure as hell will be steering clear of linksys products after this.
View 1 Replies
View Related
May 16, 2010
i need to downgrade my WAG320N and don't find old firmware 1.00.08 AnnexA
View 9 Replies
View Related
Mar 10, 2011
This WAG320N Router can get really slow after a while use which is really frustrating for me since I am a gamer. Power cycling it SOMETIMES does the trick but it will still get slow. It has been slow just now and over here it is midnight so the internet peak should be down and my internet should be faster but its now.
View 2 Replies
View Related
Nov 8, 2012
I have the WAG320N. I know if my router is updated to fix the bug of the WPS?There is an update? Which is the date scheduled for release? The vulnerability of my network has been compromised yesterday because of this bug, so either the update is released soon or I'll have to switch to another product of some companies more serious
View 3 Replies
View Related
Feb 4, 2011
Transferring a file between a wired Win 7 machine and a wireless Snow Leopard mac seems to top out at 32Mbps.I've seen over 60Mbps on this laptop using N networks before, and when I wire the laptop I get a more respectable 240Mbps (presumably maxing out the server's disk I/O rate), so I'd say the issue is the router.
Things I have already tried:updating the firmware to 1.00.125Ghz modeFinding the least crowded 2.4Ghz channelswide channelsSetting network mode to N-onlySetting the transmission rate to 108Mbpschanging the beacon interval to 50, the frag threshold to 2201 and the RTS threshold to 2202
View 2 Replies
View Related
Feb 11, 2013
Im having a issue with that any of my computers without a wireless connection have been incapable of getting out on the internet with the new router that i got myself, i know the cables works etc, since they work perfectly fine with the old modem alone, but wont work at all with this unless on a computer with wireless connection
View 5 Replies
View Related
Nov 22, 2012
I'm living in a student flat, where each student has his own room.Every room has an LAN outlet in the wall on which he is able to connect 1 device.If you like to connect more devices, we are advised to utilize a router.Our ISP gives us the right to only use 1 MAC-adress (for safety reasons), so there the router comes into play.I have a Belkin G+ wireless router on which i would like to connect my phone and laptop by a wireless configuration and my TV (Toshiba 40TL933) by wire.My laptop and phone work like a charm.When i insert my TV to the network, the whole thing collapses.My ISP provided me with the information that i connected 2 MAC-adresses and therefore, i was cut off.This would be because of the fact that belkin routers (apparently) are notorious for providing more than 1 MAC adres.When i asked for the MAC-addresses, they gave me back these 2: * 00:00:00:00:00:00 * 00:17:3f:0d:77:f5The second one is from my Router.But where does the 00.00. etc come from?
View 5 Replies
View Related
Jan 26, 2010
I have only purchased this modem a few days ago (upgraded from a working Netgear DGN2000 for Gigabit).... it's solid most the time except for once a day when it needs to be reset.
One morning I accessed a single website, only to find the next wouldn't come up. (approx 7:30am) Lastnight the net was working fine at 11:30pm.... Thismorning I woke up, checked my download manager to find that at 2:30am all queued downloads failed, so the ADSL dropped sometime inbetween then.
The LAN and Wifi still work fine, when I go into the settings and click "reconnect" nothing happens. I need to turn the modem off for a min before it works ok. There is no newer firmware as of yet to try.
View 5 Replies
View Related
Jul 9, 2011
I connected my Western Digital Studio II 2TB external harddrive which is formatted NTFS. I can access the drive and read it. But I can't write it. It says I do not have rights. I tried to get to be the owner of the device but it gave some kind of error.
View 2 Replies
View Related
May 28, 2012
I need to configure my modem router wag320n let pass the magic packet to turn on my computer from the internet. I've already opened the door 7 to the computer ip but does not work. The bios and the OS are perfectly configured.
View 8 Replies
View Related
Feb 13, 2011
I have recently bought a WAG320N modem Gigabite router to substitute the modem router supplied by the internet service provider (in theory less performant).
Formerly I have a wireless router Zyxel (MOD. P660HW-D1). The main computer is wired (connected trough ethernet), I have also a NAS device (WD mybook world 1TB with Twonky as server) wired and a third wired connection for the above mentioned PLK 300. The PLK 300 (4 Inputs and one output) is used to connect a TV (Sony BRAVIA) a Bluray (SONY) a PS3 (Sony) and a multimedia HD (DVICO). All this was working properly. I have internet access from TV, PS3,... I was able to run videos, photos,... stored in the NAS from TV,....
I decided to change for improving the transfer speed and to allow a better wireless connection (I have initially coverage problems, but because I only use the wireless rarely...).Initially I bought a Linksys E 3000 (I thought it was possible to connect it directly to internet and not trough a modem. I asked to several people and in several shops but no one told me this was not possible). That was my first failure: I would like to suggest the liknsys people to clearly explain this on the product sheet to avoid that not very well informed people like me commit the same error.
Then I chaged the E3000 by the WAG320N. I connect the new modem-router like the former (Zyxel). No room for big errors, just the power, DSL line and ethernet cables. It works for the PC and the NAS but the PLC (PLK300) do not appears to work. Several tries later (including plugin the PLK on the line 1 input of the router it is shown on the network map but do not work. I do not have access to the internet nor to the NAS contents form TV,....
I go back to the former router and everything works again in the simplest way (I have internet access form TV,...) except the Twonky access to the NAS from TV ¿?. I do not know exactly what I have changed,...)
View 1 Replies
View Related
Sep 10, 2010
How do I set the time on my WAG320N manually. I have set the time zone, but the time shown is 04-01-2000 15:33:52, and I can't find anywhere to correct this.
View 8 Replies
View Related
Jul 14, 2010
how to make in WAG320N second PVC for IP TV. It looks like unsupportable feature May be next firmware will include it? Or better to change the device? What Linksys with ADSL are support IP TV?
View 3 Replies
View Related
Feb 6, 2011
I have WAG320N. I attached External HDD to Router's USB.I don't know how to access to HDD and other users also..(not via internet)
View 1 Replies
View Related
Jun 27, 2011
I have set up an access restriction profile by time of day, but it seems that the web sites I list are blocked regardless of the time of day. Does the WAG320N apply the time of day to the blocked URLs or is the time of day only applicable to internet access?
View 1 Replies
View Related
Aug 10, 2012
I have had a wag320n for a while and ever since I bought it, The wireless stops functioning after a day or 2, if I save the settings and then restore the settings (even after it has stopped working) then it works again for a day or to then I have to repeat the process.While it was annoying most of my PC's were wired so it wasn't a major issue but in my new place I am mostly wireless so I am well over it already.
View 2 Replies
View Related
