Linksys Cable / DSL :: WAG54G2 Dropping Connection / Firmware Upgrade

Nov 22, 2010

I've been using the WAG54G2 for some time now, recently I set up a range extender and had some issues so one thing I tried was to upgrade the firmware. It was very unclear on this website where to find it (specifically for the G2). I went here but there were 2 files, Annex A or B? [irl].... The instructions are also very unclear on this. But more frustratingly the zip file just contains an ".img" file - no ".bin" as the instructions say. So i tried the manual firmware upgrade using this file and shortly after the message "...whatever you do - do not close the browser or restart the router during the upgrade..." (or similar) the router crashed, so I had to restart it and the browser. Now I think I may have introduced an error as the once perfectly-performing router occasionally drops the internet connection for a few minutes. With my work I need 100% uptime.

View 3 Replies


ADVERTISEMENT

Linksys Cable / DSL :: WAG54G2 Old Firmware Version

May 30, 2011

I happened to update firmware version of my WAG54G2 to the latest version 1.xx.xx.19. Since then connection to internet has became erratic. If rebooted, the device mostly doesn't connect. Switching to PPPoE from PPPoA and vice versa works but i have to do it every time the device is rebooted. Sometimes even that doesn't work. Basically it acts random. DSL connection shows as connected, but the internet interface is mostly down. I was wondering if i can switch back to to old 1.xx.xx.10 version. It never gave me any trouble ever for around 2 years.

View 4 Replies View Related

Linksys Cable / DSL :: WAG54G2 Firmware Update?

Aug 31, 2009

I would like to know if I have to do the firmware update this is my second WAG54G2 router I did the firmware update on the old 1 and it failed so I RMAed it the only problems im having with it is slow transfer speeds over the wireless network and it disconnects from the net now and then.  I also would like to what hardware should I use to get a 108mbps over my network because 54mbps is just too slow. I used windows 7 and mozilla to do my frimware upgrade and it failed.

View 3 Replies View Related

Linksys Cable / DSL :: WAG200G Slow Connection After Firmware Upgrade?

May 7, 2012

My Linksys WAG200G worked like a charm in these 4 years, never had connection problems... the firmware was 1.00.09 One week ago i updated the firmware to last version (1.01.09) and now i have slow connection problems, sometimes it doesn't load web pages... I tried to hard reset and I tried to downgrade to different firmwares found on the web (1.01.01 and 1.01.05)What should I do? Is it possible to find the original 1.00.09 img?

View 1 Replies View Related

Linksys Cable / DSL :: WAG54G2 Cannot Re-connect Internet Connection

Mar 12, 2011

I connected to the internet using my WAG54G2 and PPPOE connection.sometimes the internet dissconnects and I have to click the connect button in the modem status manually I selected  "Keep Alive - Redial Period" but it does not work !
 
My firmware version is  V1.00.19

View 2 Replies View Related

Linksys Cable / DSL :: WAG54G2 Losing Internet Connection

May 2, 2011

My internet connection seems to drop a lot, I'm using a WAG54G2 modem connecting via a wired connection; and my ISP is Iprimus and I'm running off an Adsl2+ connection.The light on the modem that goes out when I lose connection is usually the internet although sometimes it is the DSL light, when my connection drops out I also seem to lose speed when I reconnect, which I was able to fix by pulling the power plug out and putting it back in but it no longer works as often.
 
The top speed I have measured via 9url]... has been 350 kb/s and the lowest has been 12 kb/s.My phone line also has a loud crackly sound which goes away when I unplug my modem from the line.I used to be able to unplug my phone line to keep the connection up but that no longer works.
 
This problem is not consistent as I will have days when it is bad (slow connection speed and constant connection dropping) and days when it is alright (decent connection speed and hardly or no connection dropping).I am also running a few filters for my phone, I've tried taking the filters out but that doesn't fix it, I've tried unplugging the phone which used to work as I mentioned before but no longer does.Before I bought this modem I can't remember what I was using but that had history with locking out the connection which by replacing the modem fixed my bad connection for a 5-7 months.

View 2 Replies View Related

Linksys Cable / DSL :: WAG54G2 Connection Drop After Active Usage?

Nov 11, 2010

When i download alot (around 400-700 kb/s) or upload ( around 100kb/s) the router stops responding, for every connection. LAN WAN WLAN, all stop responding... active connections though remain connected but visiting new sites/pages is not possible...
 
plugging out the power for 10 seconds and booting it up again..

View 9 Replies View Related

Linksys Cable / DSL :: How To Upgrade Firmware For CM100

Sep 3, 2008

Is there a firmware upgrade for the Linksys CM100? My CM100's web interface keeps crashing after a week of use.

View 4 Replies View Related

Linksys Cable / DSL :: Getting AG241 V2 Firmware Upgrade?

Dec 2, 2012

Im having a bit of trouble, how am i supposed to update my router, i have DLed the tarballs from GPL and now im not sure how to update it, do i have to makefile? (im using ubuntu by the way which is handy if i have to build it!) and if i do have to makefile how do i do it?

View 2 Replies View Related

Linksys Cable / DSL :: WAG54GS Firmware Upgrade?

May 10, 2012

My router refuses to link to the internet. Status indicates Interface: Down. I thought this was probably a firmware upgrade issue but can only find v1.01.03 which is already installed. Linksys website has no firmware listed for download.
 
I have downloaded and re-installed the v1.01.03 .img file with no effect. Is this the latest firmware for this model?

View 1 Replies View Related

Linksys Cable / DSL :: WAG120N Upgrade Firmware Version (1.0.0.16)?

Jun 11, 2012

I made the change WAG120G (GREAT) for WAG120N (**bleep**) and I confess that I was somewhat disappointed, the quality of the company fell dramatically. Unlike its predecessor this modem / router is bad in many ways and first of them is support for Macintosh products, the connection drops constantly and have to get on and off the wifi to work. The modem restarts and constantly drops the connection status and its predecessor NEVER did that. iPad, iPhone and Macbook can not even keep me surfing for more than one hour, the connection just stops working. Even the cable connection, my Xbox sometimes worth it to maintain a stable connection in Live. The modem has been updated with the latest firmware version (1.0.0.16). Another thing I noticed is that the modem takes A LOT to connect with the operator. It's bad, it's expensive and does not work! I

View 9 Replies View Related

Linksys Cable / DSL :: WAG54GS Firmware Upgrade Required

Jul 30, 2012

I need to upgrade my WAG54GS, but there is no firmware in support. My latest firmware is V1.01.03. Where can I download it?

View 4 Replies View Related

Linksys Cable / DSL :: WAG354G Wireless Router - Upgrade Firmware On It

Nov 16, 2007

I have WAG354G wireless router and would like to upgrade the firmware on it, I believe it is version 1.There's two firmware downloads to choose from: Annex A and Annex B.What is the difference between the two?

View 9 Replies View Related

Linksys Wireless Router :: E3000 Cannot Connect To Cable Modem After Firmware Upgrade

Aug 28, 2011

Upgraded my E3000 from 1.0.02 to 1.0.04 and now I cant get an ip from my arris modem. I did the 30/30/30 reset and everything but no luck. I've had to plug the modem directly into the computer for now. Where can I find the 1.0.02 download or how can I fix this?

View 3 Replies View Related

Linksys Cable / DSL :: X2000 DSL Connection Keeps Dropping?

Feb 1, 2012

I installed my new X2000 a couple of days ago and my ADSL connection drops several times a day. Sometimes it will stay connected for a few minutes and other times it will stay connected for several hours. The only way to get it connected again is to reboot.I have used 2 other routers (D-Link DIR-300 and BT Home Hub 3.0) on the same line and haven't had any disconnection issues with them, so the problem must be a hardware/software fault on this router or I have set it up incorrectly.Judging by a number of posts I found online, there seems to be a general problem with DSL connections dropping on the X2000, especially on earlier firmware versions. I have subsequently upgraded to the latest firmware (Ver.2.0.01 (Build 4)), reset and reconfigured twice, but nothing has worked so far.Unless I can get this working in the next few days I am going to have to return it, which is a shame because the performance of the router is great when it's working!Would someone be able check I have configured the DSL settings on the router correctly?
 
DSL SettingsEncapsulation: RFC 2364 PPPoAMultiplexing : VCAutodetect: DisableVPI: 0VCI: 38Modulation: MultimodeMTU: 1400

View 6 Replies View Related

Linksys Cable / DSL :: Connection Dropping On The WAG200G?

Nov 1, 2012

whenever the phone is in use i.e. a call comes in or the phone is being used to dial out, the connection will drop.  I have tried changing the microfilter on the Phone Socket, and it seemed to resolve it for a while.Should I perform a Factory Reset? I am using the latest firmware which is 1.01.06 ?

View 1 Replies View Related

Linksys Cable / DSL :: Connection Dropping On WAG200G?

Dec 14, 2008

whenever the phone is in use i.e. a call comes in or the phone is being used to dial out, the connection will drop.  I have tried changing the microfilter on the Phone Socket, and it seemed to resolve it for a while.
 
Should I perform a Factory Reset?  I am using the latest firmware which is 1.01.06 

View 4 Replies View Related

Linksys Cable / DSL :: Use WAG54G2 As A Router?

May 30, 2011

I want to use WAG54G2 as plain router. I happen to have 2 of these. If i can make one of these work as router wired to another through ethernet cable or even wireless i can save some money on router.

View 8 Replies View Related

Linksys Cable / DSL :: WAG54G2 Can't See Any Settings At All

Jan 27, 2010

I have a WAG54G2 annex b and have a problem with the settings. The problem keeps emerging although I upgraded the firmware from 1.10 to 1.17.In details, almost once every day it keeps losing the settings, and although is is connected (I can browse web pages) the internet light is off, and in the admin page I can't see any settings at all. The language settings are lost, the wireless seems to be enabled, the connection settings don't show up, I can't see username/password/ip/dns and all my security restriciotns are lost. And i can't restore them until i reboot the modem, in which case everything is back like nothing has happened.

View 9 Replies View Related

Linksys Cable / DSL :: Set Up WAG54G2 Wireless Gateway?

Mar 23, 2013

Set up my WAG54G2 wireless gateway - I am able to connect to my LAN and the internet. The wireless works fine. However when I plug my server that use a wired connection into the modem/router,I lost the connection and I still unable to have internet at All. I use the firemware version V1.00.19.

View 6 Replies View Related

Linksys Cable / DSL :: How To Do Remote Reboot Of WAG54G2

Jul 6, 2010

How I can remotely reboot my WAG54G2 remotely either via telnet or through the remote web based management site. I dont seem to be able to find it anywhere and it is quite frustrating to not be able to do this remotely!

View 2 Replies View Related

Linksys Cable / DSL :: VPN Failing To Connect With WAG54G2

May 28, 2012

I need to use VPN from home to connect to my company. Company IT say that they can see my connection is successful but from home end it appears to fail (timeout). I'm using a CISCO WAG54G2 router. After attempting VPN access I have to re-boot router to establish broadband connection. I have checked Plusnet (ISP) firewall settings as okay (LOW). I have found two CISCO links which describe a similar(?) issue:
 
[URL]

I reviewed my router's Single Port Forwarding  parameter settings in light of info in these links. I then added three new ones: VPN, VPN1, and VPN2 VPN; Internal Port:500; External Port 500; Protocol:UDP; IP:192.168.1.47; Enabled Yes VPN1; Internal Port:4500; External Port 4500; Protocol:UDP; IP:192.168.1.50; Enabled Yes VPN2; Internal Port:10000; External Port 10000; Protocol:UDP; IP:192.168.1.51; Enabled Yes
 
These changes have not worked but I not yet removed them. My company uses 'Delta VPN' product. No other changes to parameters have been made before or after.

View 9 Replies View Related

Linksys Cable / DSL :: WAG54G2 - Open Nat On Ps3 And Xbox 360?

Dec 15, 2010

i have the xbox and ps3 wired to the router and the laptop wirelessly to the router (if that makes any difference)
 
My router is the Linksys WAG54G2

View 9 Replies View Related

Linksys Cable / DSL :: WAG54G2 MAC Cannot Be The Multicast Address

Feb 2, 2013

I have ADSL router WAG54G2.I both new mobile,  I can't put the mobile MAC address in "Wireless MAC Filter" because it is started with 5C:...The answer is "The MAC address cannot be the multicast address".

View 5 Replies View Related

Linksys Cable / DSL :: WAG120N Started Dropping ADSL Connection?

Jul 6, 2012

Recently, i bought a LinkSys WAG120N ANNEX-A to replace my old speedstrem4200. Well everything was fine, but after 2 days of it installed, it started to drop my ADSL connection.
 
Sometimes, it remain connected for 4-5 hours, then drop, or sometimes, it drop every 30min-1hour.I tried upgrading the firmware to 1.00.16, but no luck, it still drop the connection.I have 3 computer plugged to the router via cable(wired) plus 1 netbook(wireless) and 1 ipod (wireless).Sometimes, when 1 computer is turned off, it seem to make the ADSL connection drop when the LAN light turn off. I noticed everytime it drop the ADSL connection, in the logs, i get this:
 
Mon, 2010-11-08 22:24:57 - Terminating on signal 15. Mon, 2010-11-08 22:24:57 - Enter: tdb_store. Mon, 2010-11-08 22:24:57 - tdb_store: calling tdb_update. Mon, 2010-11-08 22:24:57 - Enter: tdb_update. Mon, 2010-11-08 22:24:57 - Enter: tdb_store. Mon, 2010-11-08 22:24:57 - tdb_store: calling tdb_update. Mon, 2010-11-08 22:24:57 - Enter: tdb_update. Mon, 2010-11-08 22:24:57 - Enter: tdb_store. Mon, 2010-11-08 22:24:57 - tdb_store: calling tdb_update. Mon, 2010-11-08 22:24:57 - Enter: tdb_update. Mon, 2010-11-08 22:24:57 - Couldn't increase MTU to 1500. Mon, 2010-11-08 22:24:57 - Couldn't increase MRU to 1500 Mon, 2010-11-08 22:24:57 - LCP down. Mon, 2010-11-08 22:24:58 - Modem hangup Mon, 2010-11-08 22:24:58 - Connection terminated. Mon, 2010-11-08 22:24:58 - Connect time 215.0 minutes. Mon, 2010-11-08 22:24:58 - Sent 50496235 bytes, received 212267122 bytes. Mon, 2010-11-08 22:24:58 - Enter: tdb_store. Mon, 2010-11-08 22:24:58 - tdb_store: calling tdb_update. Mon, 2010-11-08 22:24:58 - Enter: tdb_update. Mon, 2010-11-08 22:24:58 - Doing disconnect Mon, 2010-11-08 22:24:58 - Exit.
 
I tried changing the MTU settings in the router to 1492 (my ISP default) but didnt work.
 
Tried changing the MTU to 1492 on every computer and still got the same problem.For now im using the WAG120N in bridge mode, and still using my old speedstream4200 as ADSL modem.

View 5 Replies View Related

Linksys Cable / Dsl :: How To Install Wifi Antenna On Wag54g2

May 23, 2011

Let's say, an antenna like that Should I open the modem and therein there could be a slot for it to be plugged in? Because on the back side of the modem none of the slots will suit such plug.

View 2 Replies View Related

Linksys Cable / DSL :: See DSL Path Mode On WAG54G2 Modem

Nov 7, 2011

How can I see "DSL Path Mode" on my WAG54G2 modem, How do i know,the line FAST PATH or INTERLEAVE ?

View 1 Replies View Related

Linksys Cable / Dsl :: Wifi On Wag54g2 Performs Very Bad When Signal Is 2 Out Of 5 Or Less

Feb 11, 2011

I'm facing a strange problem here with my WAG54G2 gateway. I've got a very bad connection when the signal strength is 2 out of 5 or less. I tested the DL and UL speed via url...and gives me hardly 1 Mb/s even though I have 10Mb ADSL connection. With wired and wireless connection with 3 out of 5 or more I got 8.7 Mb DL from the mentioned website.

View 1 Replies View Related

Linksys Cable / DSL :: WAG54G2 Switch To Bridged Mode Only?

Oct 20, 2010

My Encapsulation router WAG54G2  switch RFC 2516 PPPoE to Bridged mode only everyday and all configuration that i made will reset and also Application & Gaming button error when i click.I'v reset to factory default and upgrade the firmwire to the latest one but it not work also  I replace the device but nothing changed.The problem will solve if I cut the powir off and restarted agein. 

View 3 Replies View Related

Linksys Cable / DSL :: WAG54G2-EW / Windows 7 Laptops Not Wireless

May 27, 2011

 Last year I was working with Vista  laptop and pc , there were no wireless problems with the WAG54G2-EW. Now I have 2 laptops, working on windows 7. But they cannot go to wirless mode, only connected with a cable I can go to the internet. I have downloaded the last firmware.When I tried Windows help the conclusion is : your router cannot be configurated for Windows7

View 2 Replies View Related

Linksys Cable / Dsl :: Wag54g2 - Access To Wifi By Mac Address?

Dec 20, 2011

There is a Linksys WAG54G2 firmware v1.00.19. If you try to configure access to wi-fi on the list of MAC-address get the error "The MAC address can not be broadcast address" for the MAC address - 5c: XX: XX: XX: XX: XX, for mobile phone Sony Ericson Neo. Safety on the modem is turned off. Laptop computer and connect to Wi-Fi without any problems. Prompt a possible solution. Which parameters can be set?

View 3 Replies View Related

Linksys Cable / DSL :: WAG54G2 Data Will Be Transferred Over Internet

Jan 9, 2012

I have two LAN networks. Both using LINKSYS WAG54G2 Wireless + Gateway. I can create a VPN tunnel between the two networks to connect them. But since the data will be transferred over the internet, I want to know how safe it is. Is there anyway i can make it more secure?

View 3 Replies View Related

Linksys Cable / DSL :: Control Panel Crashes Wag54g2?

Feb 26, 2011

when i enter 2 Access Restrictions & add put some data After a period of time Control Panel crashes

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved