I tried to download the new firmware version (2.0.04) for Linksys x2000 hw version 1 Annex A: error 404 page not found.Same issue with 2 different machines on different internet connections.
View 3 RepliesI havce a WAG160N that is still on firmware version V1.00.16 andf I want to update it to the latest version. I have seen on url...WAG160N that there is two versions to download - Annex A and Annex B under version 2.0.
View 3 Replies View RelatedThis is now an issue with new firmware. I cannot even log into blockbuster.com. I have noticed cookie issues since 2.0.04 firmware installed.
View 9 Replies View RelatedI happened to update firmware version of my WAG54G2 to the latest version 1.xx.xx.19. Since then connection to internet has became erratic. If rebooted, the device mostly doesn't connect. Switching to PPPoE from PPPoA and vice versa works but i have to do it every time the device is rebooted. Sometimes even that doesn't work. Basically it acts random. DSL connection shows as connected, but the internet interface is mostly down. I was wondering if i can switch back to to old 1.xx.xx.10 version. It never gave me any trouble ever for around 2 years.
View 4 Replies View RelatedI made the change WAG120G (GREAT) for WAG120N (**bleep**) and I confess that I was somewhat disappointed, the quality of the company fell dramatically. Unlike its predecessor this modem / router is bad in many ways and first of them is support for Macintosh products, the connection drops constantly and have to get on and off the wifi to work. The modem restarts and constantly drops the connection status and its predecessor NEVER did that. iPad, iPhone and Macbook can not even keep me surfing for more than one hour, the connection just stops working. Even the cable connection, my Xbox sometimes worth it to maintain a stable connection in Live. The modem has been updated with the latest firmware version (1.0.0.16). Another thing I noticed is that the modem takes A LOT to connect with the operator. It's bad, it's expensive and does not work! I
View 9 Replies View Relatedi went through the website and figured that my firmware is 1.01.05 and there's a new version availble which is 1.01.09 for my Linksys WAG200G modem since im having problem with unstable connection and now, after i updated the firmware, not only that im dropping connection heaps more, my internet connection has slowed down by alot.
View 2 Replies View RelatedPossible using a firmware upgrade to change the wag200g from annex B to annex A?T
View 6 Replies View RelatedAs you can see in the subject that is my configuation, i always need to reboot the device to let my mac map the nas on finder
after the reboot nas is mapped.
The second problem is that i need to reboot the device if i want to use Remote App on my iphone to remote control itunes again after rebooting romote app on iphone connects to iTunes.
i have a Linksys x3000 DSL modem/router. I need to set up an Annex B DSL connection. Is it possible to chance the modem to Annex B using firmware?
View 9 Replies View Relatedhow to switch AM200 adsl modem to AnnexB mode, in Slovakia working only AnnexB
View 2 Replies View RelatedHow can i add several vpi / vci to my Linksys x2000 ?
View 7 Replies View RelatedJust picked up a X2000 and Cisco connect configured my connection, and assigned an IP to my desktop pc.I configured my PC back to a Static IP which is outside the DHCP range in the X2000, and all seems to be working ok..now looking in the web-based X2000 setup screen my pc is no longer listed as a client...so should I manually add it as a client and assign the IP & MAC address in the Cisco setup or is this not necesary.?
View 5 Replies View RelatedI have the X2000. It has 3 ports. I need 4. I also have the WRT160N V3 router which has 4 ports. Is there a way to use this router with the X2000 to get the 4 ports I need ? If not, what are my other options to get 4 ports ?
View 2 Replies View RelatedI've tried everything to get this to produce an i.p address but to no avail.I check with my ISP (o2/BE) they told me all my settings are correct it syncs but just does not pick up an IP address.
View 6 Replies View Relatedlinksys x 2000 modem unfortunately, when I turned the modem on today, the power light which normally was white became red.I tried all the ways I knew, such as restarting in 5 or 30 seconds intervals but unfortunately it didn't work
View 3 Replies View RelatedTrying to replace old modem with the X2000 but it will not connect to the internet, my provider is ATT DSL.
View 2 Replies View RelatedI cannot get my X2000 to connect to my ISP in the UK. From what I've read elsewhere I'm not the only one but I need to determine whether this is a router support issue or ISP.
View 9 Replies View RelatedHow to change the frequency on X2000
View 1 Replies View RelatedI installed my new X2000 a couple of days ago and my ADSL connection drops several times a day. Sometimes it will stay connected for a few minutes and other times it will stay connected for several hours. The only way to get it connected again is to reboot.I have used 2 other routers (D-Link DIR-300 and BT Home Hub 3.0) on the same line and haven't had any disconnection issues with them, so the problem must be a hardware/software fault on this router or I have set it up incorrectly.Judging by a number of posts I found online, there seems to be a general problem with DSL connections dropping on the X2000, especially on earlier firmware versions. I have subsequently upgraded to the latest firmware (Ver.2.0.01 (Build 4)), reset and reconfigured twice, but nothing has worked so far.Unless I can get this working in the next few days I am going to have to return it, which is a shame because the performance of the router is great when it's working!Would someone be able check I have configured the DSL settings on the router correctly?
DSL SettingsEncapsulation: RFC 2364 PPPoAMultiplexing : VCAutodetect: DisableVPI: 0VCI: 38Modulation: MultimodeMTU: 1400
I have been setting up my new Cisco X2000 wireless router recently and I have it working fine for my desktop/laptops and even the PS3, however for some reason when you try to use the wireless on some of the other computers in my house it doesn't work unless you are using a wireless guest account.
View 2 Replies View RelatedCan the 2 WAN ports be connected at the same time to provide failover and if so can this be configured for priority/ delay etc.A user has a very poor ADSL service so also has a bidirectional satellite link. Due to the latter's high latency I don't want it dropping that connection too quickly.
View 1 Replies View RelatedSo its the 3rd day of my nightmare to set up this cisco ADSL router...
Status:
Setup:
DSL connection:
So I live in Ireland and im on Smart telecom ISP, Basicly the internet is half going - like skype is going and i can chat with my contacts, cisco.com page is going but really SLOW, google.com page is going until search, speedtest.net page is going until the mesure thing facebook loads like in 10min.. a lot of pages dosent even go...From main telephone socket to the router is only 2.5m telephone cable(NO HOME PHONE) so no splitter or extension... (Changing the MTU dosent change anything...only if i set it on auto then w7 shows that internet is connected, skype works but no pages at all is loading and is dropping with timeout error.. if i set to manual then something loads on pages...) The cisco connect software does NOT do good because I can go until the username/pasword step, I input THE CORRECT details but he just sayes that he cant authenticate the username & pasw... and so i cant get past that step and the programm is no good.... only way is to set up with 192.168.1.1!
How can I get Max network LAN speed from the X2000.I am connecting with a Macbook and an iMac both with N speed aiport cards.When checking the network speed through mac 'Network Utility' it is only getting 130 Mbps.Should it be getting closer to 300 Mps?
View 3 Replies View RelatedI run a X2000 router for some weeks and it works properly basically - with one exception.WIFI attached devices (Win7, Vista, Android) can go to the internet without having any problem. But they cannot access my local servers (Media-Server, Storage server). I access with normal settings (not the guest) but the behavior is similar to what I expected from the guest-WIFI: protect resources in LAN.Anyway, for historical reason I have also another WIFI Hotspot in the LAN what is connected to the X2000 via cable. If the same devices connect to this hotspot, everything works fine. So the problem isn't caused by the servers.
View 9 Replies View RelatedI'm having trouble with my Linksys X2000 modem/router to stay connected to internet. I have tried upgrading the firmware & changing my ip address, but still with no success.The router part is staying connected, but the dsl will drop off. I have to unplug to get it up and working again.
View 9 Replies View RelatedI have been trying this for ours and need to get it to work for a small branch office so I can get their cisco device connected and phones working.
The device works fine if I assigned it an IP address but the minute I set bridge mode only and assign the static IP to my system then nothing works. I have the latest firmware.
I just bought a new wireless modem router Linksys X2000 And I couldn't find the line status like SN margin and line attenuation and so on [URL]
how to access my ADSL line status
I'd really like to be able to monitor DSL traffic on my X2000. SNMP is the logical way to do this; Looking at the source to the Management screen, it looks tantalizingly close, but the SNMP bits are commented out in the HTML.
View 4 Replies View RelatedI have a new X2000 v2 firmware 2.0.04. When I use it- itunes on my PC with seven don't work and give me error 8003.- the Apple Store on my iPad and on my iPhone don't download or upgrade the application.- itunes on my macbook air with mountain lions don't work and give me error 8003.- the download in ftp are very slowIf I use my old AG2241V2 all work fine.I have replicated the configution of old router on the new as far as possible but don't work.
View 3 Replies View RelatedI have linksys X2000 modem and linksys WAG 200G modem I can use them both if needed I want to share my internet with my brother on our house But I want each one of us to have equal bandwidth ( speed ) How can I do this using those devices.
View 4 Replies View RelatedHere my network.dsl provider-->d-link modem (dhcp server, 192.168.1.1)-->X2000 (dhcp replay, 192.168.2.1(LAN IP))--> My laptop - X2000 config: dhcp replay: 192.168.1.1, LAN1 from d-link to WAN x2000 (blue rj45), X2000 have ip address from d-link. but my laptop can not receive ip address. X2000 is not gateway modem because it stuck after 1 day work. Can access to Web config page and internet.
View 4 Replies View RelatedI lost the disc to my X2000 gateway. Is there a download site for the software?
View 1 Replies View RelatedI recently purchased at Linksys X2000 Router/dsl modem, I ran the setup and everything works fine except for when I am trying to play games online with one device and surf the web on another device it keeps kicking one or both devices offline, but if only one of them is on it works fine.I have AT&T dsl and I have checked all my setting and the router was setup by linksys Cisco Connect program but it still gives me this issue.Is there anything I can do to fix this? My old WRT54G Router and AT&T dsl modem did not have this problem.
View 9 Replies View Related