Linksys Wireless Router :: E3000 - Host Migration Failed On Call Of Duty By MW3
Nov 8, 2011I just bought mw3 but when I try to start multiplayer the game direct me to this, [URL]. I don't know how to fix it, and my UPnP is enable
View 6 Replies
ADVERTISEMENT
Linksys Wireless Router :: E4100 Can Setup A LAN Game Of Call Of Duty Mw3
Feb 22, 2013With the E4100 I can setup a LAN game of call of duty mw3 and 1 xbox can join the other, pretty simple, Ive always been able to do this with all xbox games that have LAN ability.With the EA6500 I see the game is availible on LAN, but I can never connect to the game, it tries to connect and says cannot connect.Any LAN settings Im missing here, or just another EA6500 bug to add to the list?
View 2 Replies View RelatedHuge Lag In Call Of Duty 4 After Installing Thomson TG585v7 Modem Router?
Jun 6, 2011So I used to use a Thomson TG585v7 modem router (wireless) as my means of connecting to the internet, the aerial cracked on it and I began getting dropped connections, so I went out and bought a D-Link DSL-2730B modem+router. I am hooked up wirelessly to the internet as there is no phone jack in my bedroom, and I experience massive and prolonged lag while playing call of duty 4 multiplayer, which I never had before with my old Thomson modem. My ping also shoots up to about 400 and then 999 while I teleport around the map.
View 3 Replies View RelatedHow To Play Multiplayer Call Of Duty
Dec 17, 2011In Age of Empires ESO will let me log in to game, but fail to join games in lobby
View 1 Replies View RelatedD-Link DIR-655 :: NAT Type Strict For Call Of Duty Black Ops
Jan 12, 2011i followed the instructions on the link and I can not for the life of me get my NAT to display OPEN or even Moderate. Always says STRICT. I have tried all the link and all the videos about forwarding ports followed all the instructions to the T. But the PS3 in the DMZ. And still, Nothing. It's BS.
Using router FW: 2.00NA
Ports Forwarded: TCP 80-81,443,5223
UDP 2005,3074,3075
TCP 3074
UDP 3478
Assigned QOS engine rule to the IP of my PlayStation and set it to priority 1.UDP Endport Filtering and TCP Endport Filtering Both set to independent?Enabled Anti-Spoof Checking?
Linksys Wireless Router :: E1000 / HNAP Call To Device Failed For Unknown Reasons
Jul 10, 2012I am trying to install Cisco Connect for my E1000 but I get the following error each attempt "An HNAP Call to the device failed for unknown reasons" I've already updated the router to 2.1 version of the Firmware.
Full Details
Error code: 82BD0305Error description: An HNAP call to the device failed for an unknown reason.Model name: unknownModel number: E1000Serial number: unknownFirmware version: unknownOperating system: Windows 7 SP 1Software version: 1.3.11069.2Connection type (WAN): unknownIP address (LAN): unknownIP address (WAN): unknownComputer IP address: 192.168.1.132
Linksys Wireless Router :: E3000 - Getting Destination Host Unreachable
Apr 12, 2012Cisco Linksys E3000
I have different types of network clients connecting to both bands of router (5 ghz and 2.4 ghz), and both bands set to WPA2 only. Everything has been set up and working for the past year with no problems.
Suddenly this morning, none of the 2.4 ghz clients can connect and get authenticated. When I attempt to ping them from a Windows 7 desktop connected by a LAN cable, I get Destination Host Unreachable.
The 5 ghz clients are fine and have had no problems. I tested this with the New iPad connected to the 5 ghz band.
Rebooted the E3000 router and the Comcast cable modem, then installed the newest firmware on the E3000 using the web access portal at 192.168.1.1, and still not working.
Changed the WPA2 Personal security mode for the 2.4 ghz band to WPA2 Personal/WPA Mixed Mode, and now all the clients are connected and authenticated and working OK, albeit slower.
What happened? And how can I fix this so I can change the security mode for the 2.4 ghz band back to WPA2 Personal?
P.S. The types of clients that connect to the 2.4 ghz band are 2 Windows 7 desktops, a Windows 7 laptop, and 5 Cisco Wireless N Internet Home Monitoring Cameras. The camera feeds have slowed down considerably using this Mixed mode.
Cisco Firewall :: ASA5510 - Contacting Host Through VPN Failed
Apr 27, 2009I would swear this worked at one point. I have a corporate office, and I have IPSec tunnels out to my outside offices. The corporate office has an ASA5510, and most of the remote offices are running off of Pix506s, one office has an ASA5505.
When anyone connects through WebVPN, using AnyConnect or not, they can contact any of the cifs shares for servers inside the corporate office. They cannot, however, contact cifs shares on servers that are in the remote offices.
Linksys Wired Router :: RV042 SIP Call Cut Offs After 5 Minutes?
Jun 15, 2012We have a RV042 with the lastes firmware v4.1.1.01-sp. We try to use Aastra SIP Phone 55i. Phone work perfectly with no router. But behind router call cut off after 5 minutes. Phone registration SIP periode are 30 second. Block WAN Request, and Multicast Passthrough firewall setting are desactivate.
View 1 Replies View RelatedLinksys Wireless Router :: Odd Client Host Name On WRT54GL
Dec 22, 2012In the past few days I have seen an odd named Client Host "The-Britannic" show up on my DHCP Active IP Table list. There is no device (that I'm aware of) with that name on my network. I delete it but it reappears, and is linked to the same IP (192.168.1.101) and MAC address everytime, so it appears to be a legitimate device. Although it looks like a legitimate device, it's not - so far as I know. I have added the MAC address to the blocked list (internet access / access restriction) to see if I or anyone in-house losese internet connectivity on any. So far, no. Searching various malware and spyware sites turn up nothing.
I realize the IP address is assigned by the router through the automatic DHCP assignement process. I do not broadcast my SSID and have a complex passcode assigned to both the wireless and internal network. Of course, that is no 100% guarentee that someone has not gotten in.I'm running a WRT54GL, all Windows 7 PC's on a home built network. I'll probably change all the passcodes (wireless and Windows Home Network) to see if that disallows access.
Linksys Wireless Router :: Host Online Games With E2500?
Jul 31, 2011How hard is it to host online games with a E2500 Router?
View 1 Replies View RelatedLinksys Wireless Router :: WRT54G Unreachable Host And No Ping
Sep 26, 2011I've tried everything that has been posted so far except for opening up the router itself which I will refuse to do.- Getting = Host Unreachable 192.168.1.20 (I am using 192.168.1.1 as the gateway)- No ping whatsoever even when turning on the router over and over.
View 2 Replies View RelatedLinksys Wireless Router :: E2500 Local Host Name Resolution?
Aug 7, 2011I just purchased an E2500. I have a small home network dominated by Mac and Linux boxes, with an occassional Windows machine. On my previous router I had been running OpenWRT.
One of the nice features of DNSMASQ is that it will do local name resolution from the /etc/hosts file on the router. Is there anyway to turn on similar features in the E2500? I have a NAS box and a networked printer that require local name resolution. I had hoped that I could just create a DHCP reservation for them, and that the router would resolve their names for other hosts on the network. This does not appear to work.
Should I just be boxing this thing up and returning it in favor of a unit I can flash better firmware on to?
Linksys Wireless Router :: E3000 FTP Not Seen On The WAN
Apr 22, 2012I have a Linksys E3000 router set as Lan-Lan 192.168.0.2 hosting my internal LAN connected to a motorola Surfboard (Brighthouse) internet Wireless/Wired access point 192.168.0.1.I have a Web server hosting a site connected direct to the surfboard (works fine) . The FTP "site" on the E3000 can be seen by all pcs on the internal LAN. However, it can NOT be seen from the internet (Android with FTP client being used for test device)
Primary Access point 192.168.0.1
DCHP server with reserved IP addresses for server and PC's and smartphones
Port Forwarding Set for Server at 0.004 : 80
Port Forwarding Set for E3000 at 0.002 :21
Secondary (E3000) router 192.168.0.2
DCHP server is disabled
Port Forwarding is Not being used
connected to primary router LAN port 1 by LAN port 1 on E3000
All pc's can access the Internet when connected to the E3000 via cable or wireless?All pc's can access the FTP server on E3000 via cable or wireless as a LAN location (connected to either router)?How can I get the FTP to be seen from the internet ?
Linksys Wireless Router :: How To Get Most Out Of E3000
Jun 29, 2011I recently bought a Cisco e3000 router. I updated the firmware but I am still only getting 1.33 Mbps at most. The only things plugged into it is my PC and my xbox. I bought the router so i could get a better connection on my xbox so netflix wont stop playback.
View 9 Replies View RelatedLinksys Wireless Router :: WRT54G2 V1 Bricked / Destination Host Unreachable
Jan 2, 2011I attempted to upgrade the firmware on the WRT54G2 V1 (the newer, slim black model) but it failed. I let the upgrade run for about 10 minutes and it just sat there and link to router disconnected I run ping for 192.168.1.1 but response is "DESTINATION HOST UNREACHABLE". The router is now completely unusable and the ALL LAN ports lights are ON and Internet light is also ON.
View 9 Replies View RelatedLinksys Wireless Router :: Setting Up E2500 To Host Games Online
Aug 4, 2011How do I go about setting up my E2500 Router to host games online? I'm talking like Deer Hunter 2005!
View 4 Replies View RelatedLinksys Wireless Router :: E4200 Received Response From Host (IP Address)
Jun 23, 2011I replaced my old wireless router with a Cisco Linksys E4200, running firmware version 1.0.02 build 13 May 24, 2011. About once a minute the router sends an unsolicited DNS message to the IPV4 multicast address 01:00:5e:00:00:fb with a destination IP address of 224.0.0.251. The unsolicited message is a DNS response with source port 32784, transaction ID 0, flags 0x8400 (standard query response, no error), questions 0, answer RRs 2, authority RRs 0 and additional RRs 1. The two answers both relate to the router itself: one has Name Cisco18738.local, type A (host address), class 1 (IN), cache flush true, time to live 1 minute, data length 4, and the address of the router. The other is the reverse of the same address. The additional record is for Cisco18738.local, type NSEC, class IN, cache flush true, time to live 1 minute, data length 5, next domain name Cisco18738.local, RR type A (host address).
When my desktop computer receives these messages it logs an error, for example: "Jun 23 07:39:22 sauterws02 avahi-daemon[1067]: Received response from host 10.146.9.1 with invalid source port 32784 on interface 'eth0.0'" The 10.146.9.1 is the router's IP address. I also see these messages on the wireless link from my laptop.I suppose the E4200 is generating these DNS messages in a misguided attempt to make sure there is no old information about its name. Is there a way to turn them off? If not, is there a way to report this to Cisco as a bug?
Linksys Wireless Router :: E3000 No Address From ISP On WAN?
Apr 2, 2012I have an e3000 that cannot obtain an address from the ISP. I can get an address on the computer and an old router by directly connecting the cable to the computer or the router. I can also daisy-chain the e3000 to the old router, and I can get an address on the e3000 from the old router. I have hard reset the e3000, changed firmware from the Linksys to TomatoUSB and back to Linksys, and I still can't get it to work. It worked fine on Saturday until a bolt of lightning hit close to the house. Since then, I cannot get the e3000 to connect to the ISP.
View 9 Replies View RelatedLinksys Wireless Router :: Set Up E3000 For ATT U-verse?
Jul 11, 2011How do you set up the E3000 for ATT u-verse?
View 2 Replies View RelatedLinksys Wireless Router :: Way To Install E3000
May 9, 2012install linksys e3000.
View 1 Replies View RelatedLinksys Wireless Router :: Restore Ver.1.0.04 On E3000?
Oct 26, 2012I had a failed Tomato upgrade and now Connect Setup can't see router to revert back to original. I get message 82BD0101 or computer not connected to router. Also the http://192.168.1.1 trick won't work. Is there any way to restore besides 30/30/30?
View 2 Replies View RelatedLinksys Wireless Router :: E3000 - Override Only DNS From ISP
Nov 3, 2012I would like to override the DNS servers provided by DHCP via my ISP. The other settings I would like to preserve (like my assigned IP).How to achieve this with E3000 ?
View 3 Replies View RelatedLinksys Wireless Router :: E3000 Gets Slow After A While
Feb 17, 2011It seems like after a certain amount of time, maybe a few days... my E3000 gets slowww.. I'm talking dog slow. And it's not just the internet, I have a media server connected to it, and usually when I put something on it, the transfer rate is about 3.5MB/s (not bits, bytes). But everything is slow, I top out at speed of maybe 1/6 normal on the internet as well.
View 8 Replies View RelatedLinksys Wireless Router :: E3000 Cannot Keep Signal
Aug 21, 2011We have a wireless internet service. Not satellite. We basically have an antenna on our house that picks up the signal from a tower a mile or two away. I used the e3000 router when we lived in town with broadband internet and it worked fine. I can't get it to keep a hold of a signal. I can connect to the router from the computers but the router drops the signal from the tower. I have an old router that the wireless company was kind enough to lend me that works , but the signal is weak and it could die at any moment... I"m at my wits end.. I have an expensive piece of equipment that wont hold the signal. I have updated the firmware and the Cisco connect software..
View 5 Replies View RelatedLinksys Wireless Router :: Testing QoS On New E3000
Apr 19, 2010Has anyone tested QoS on the new E3000? Whenever I add an application (e.g. Voice Device) and set priority to Medium or High, my upstream bandwidth for everything else is immediately cut significantly, even when I'm not using the priority application.
For example, with QoS disabled, I can consistently get 10Mb upstream (speedtest.comcast.net). As soon as I enable QoS, upstream is capped to exactly 2Mb! On my old router, there was an option to set the total upstream bandwidth -- but on the E3000 there is no such option that I can find.
Linksys Wireless Router :: Use Internet With E3000?
May 18, 2011just bought an e3000 and want to use it with wireless internet- usb modem. when setting up it wouldnt go any further than the 'searching for connection' page as it couldnt detect a connection in the 'internet' lan (wan?) port.can i set it up to accept the wireless usb modem?
View 6 Replies View RelatedLinksys Wireless Router :: Lost Cd For E3000?
Aug 17, 2012I lost my cd for my router e3000 any way still to use it?
View 1 Replies View RelatedLinksys Wireless Router :: E3000 - Wi-Fi Not Working
Oct 20, 2010I just bought an E3000 about 30 hours ago and just unrealistically my router now doesn't want to give me any WiFi at all. I tried reset button, tried re plugin all of my system as well as pressing for short and long period the middle button that indicates WiFi is accessible. I already bought 3 linksys routers.
View 2 Replies View RelatedLinksys Wireless Router :: E3000 - How To Get It Working
Aug 25, 2011Looking at upgrading my router to an e3000 however I've got a couple of questions. I might come across as a bit thick with this one but I have read that you need a modem to make the router work, I can't get my head around this as I've not come across this before. I always thought the router was the modem!! I've also heard that the E3000 only works with cable ISP and not ADSL, is that true?
View 2 Replies View RelatedLinksys Wireless Router :: VPN Connection Failed When Using WRT54GS
Sep 12, 2011Currently I have Verizon DSL and which supplied me with a Westell 7500 modem/wireless router. I am also connecting a Linksys WRT54GS (firmware Version: 7.2.08) to the Westell 7500.
When I connect via cable or wireless to Linksys WRT54GS I am not able to establish VPN connection. I get the error “Error 619: A connection to the remote computer could not be established. So the port used for this connection was closed”.
However, when I connect via cable or wireless to Westell 7500 I am able to connect to VPN.
I tried resetting the Linksys WRT54GS to factory settings and reconfigured but no success to VPN.
At work we have a Windows 2003 setup with VPN Role on it and on my laptop I am using the built in VPN connection within Windows 7.
Linksys Wireless Router :: WRT54G - Upgrade Are Failed
Jul 24, 2011I have Firmware Version: v4.21.1 and whenever I try to upgrade it to the latest one it says "Upgrade are failed!"
View 8 Replies View RelatedLinksys Wireless Router :: DNS Lookup Failed WRT120N?
Dec 22, 2012I've been having an issue with my internet connection, which has been getting a lot worse over the past 1 month. I purchased the WRT120N about a year and a half ago, and occasionally observed dropped connections, but it was no big deal. Over teh past month or so, however, it seems like I get the "DNS lookup failed" error about every 15-30 minutes. Every time, I have to disconnect and reconnect my computer to my router. In addition, I will be disconnected from XBox Live. This problem may occur every 5 minutes or every few hours.
I have updated the firmware on the router. I have reset the router, and have reset DNS 1 t0 8.8.8.8 and DNS 2 to 8.8.4.4. THe network is configured as a DHCP. The X-Box has a wired connection, and my laptop experiences this problem whether I use a wired connection or a wireless one.
