How To Play Multiplayer Call Of Duty
Dec 17, 2011In Age of Empires ESO will let me log in to game, but fail to join games in lobby
View 1 Replies
ADVERTISEMENT
D-Link DIR-655 :: NAT Type Strict For Call Of Duty Black Ops
Jan 12, 2011i followed the instructions on the link and I can not for the life of me get my NAT to display OPEN or even Moderate. Always says STRICT. I have tried all the link and all the videos about forwarding ports followed all the instructions to the T. But the PS3 in the DMZ. And still, Nothing. It's BS.
Using router FW: 2.00NA
Ports Forwarded: TCP 80-81,443,5223
UDP 2005,3074,3075
TCP 3074
UDP 3478
Assigned QOS engine rule to the IP of my PlayStation and set it to priority 1.UDP Endport Filtering and TCP Endport Filtering Both set to independent?Enabled Anti-Spoof Checking?
Huge Lag In Call Of Duty 4 After Installing Thomson TG585v7 Modem Router?
Jun 6, 2011So I used to use a Thomson TG585v7 modem router (wireless) as my means of connecting to the internet, the aerial cracked on it and I began getting dropped connections, so I went out and bought a D-Link DSL-2730B modem+router. I am hooked up wirelessly to the internet as there is no phone jack in my bedroom, and I experience massive and prolonged lag while playing call of duty 4 multiplayer, which I never had before with my old Thomson modem. My ping also shoots up to about 400 and then 999 while I teleport around the map.
View 3 Replies View RelatedLinksys Wireless Router :: E4100 Can Setup A LAN Game Of Call Of Duty Mw3
Feb 22, 2013With the E4100 I can setup a LAN game of call of duty mw3 and 1 xbox can join the other, pretty simple, Ive always been able to do this with all xbox games that have LAN ability.With the EA6500 I see the game is availible on LAN, but I can never connect to the game, it tries to connect and says cannot connect.Any LAN settings Im missing here, or just another EA6500 bug to add to the list?
View 2 Replies View RelatedLinksys Wireless Router :: E3000 - Host Migration Failed On Call Of Duty By MW3
Nov 8, 2011I just bought mw3 but when I try to start multiplayer the game direct me to this, [URL]. I don't know how to fix it, and my UPnP is enable
View 6 Replies View RelatedConnect A PC And Other Laptops To Play Multiplayer Games?
Jun 20, 2011My friends and I used to play multi player games in laptops... Now I need to join my desktop to the network.. How do I do it...?
View 1 Replies View RelatedWNDR3700 - Brink - Unable To Play Multiplayer Due To Some Ports That Need To Be Forwarded
May 9, 2011I just got the game Brink an i am unable to play multiplayer due to some ports that need to be forwarded. I have a WNDR3700 net gear router an i know how to get into it an get to the port forward options i know all the information to enter except the last box it asks for a server IP adress?
View 10 Replies View RelatedUnable To Connect Multiplayer Games?
Jan 19, 2012I just installed several multiplayer games like CoD:Modern Warfare, Counter Strike,NFS: The Run on my PC. But whenever I connect to multiplayer mode, it gives error saying Unable to Connect to internet. However Internet is connected and I am able to surf or download the internet with much better speed.I am unable to figure out what the problem is. I had also turned off the firewall, antiviruses still problem remains same.I think that my ISP is filtering some ports, if it is so then is there any way to figure it out. And is there any way to run my multiplayer games
View 6 Replies View RelatedHigh Pings While Playing Multiplayer Games?
Jun 2, 2011Now there is an issue that I don't really know how to deal with it and its the multiplayer games ping that I get lately , its about 3 months that I get very high pings when connecting online to a multiplayer server , no matter which game it is , the same happens.
I was getting around 380-470 ping while playing on an European server , but then we solved my last problem (The someone that was connected to my home network) and it reduced the ping to something around 250-300 (sometimes it drops to 100-120).
It is still very high , 3 months ago I had a real bad internet connection and when I was playing on European server's I was getting a stable ping of 100-120 that was normal !
A friend of mine got the same connection that I have and he gets a ping of 100-120 and we play on the same servers (same ISP too).
How can I know where the problems come from ? I did move to a new house in a new area , maybe the ISP server's over there are weak and over loaded ? Because when its like 02.00 AM I am getting a stable ping of 100-120 . What is going on here ? Is there a possibility to ask the ISP to move my connection to another area servers or something like that ?
Open Up Certain Ports To Host Multiplayer Games On The Internet?
Mar 23, 2011I am trying to open up certain ports to host multiplayer games on the internet on my computer and on Xbox 360.The only internet service provider is primecast. I am able to open the ports on my router but the ports still show closed using portforward.com portchecker. I disabled all firewalls and Anti-Virus, no luck. I even connected my computer directly to the modem, the ports are still closed. The Router is a Linksys WRT400N set to single band. The modem is an Alcatel although there is no model number (it has a fiber optic connection, coax connection and 2 ethernet port connections). The condo is cat 5 ready so the router has multiple ethernet cables which go to the ethernet wall plugs throughout the apartment which is how I connect to my desktop.
FYI:One of the games I am trying to play online IL2 1946, people simply cannot connect.In another game Company of Heroes, people cannot connect and I cannot connect to most games it says there is a NAT issue when connecting.
PS When I go into ipconfig I now see IPv4 and IPv6, I don't know if that has something to do with it but to my knowledge these sections were not here previously (before I moved).
Win 7 x64
Intel I5 750 1186
12 GB Ram
1.5 Tb HDD in Raid Striping
ATI Radeon HD 5770
Connection Drops Periodically When Playing Multiplayer Games?
Jul 14, 2012Up until now, my wired connection to my modem has been flawless. Recently I have been experiencing periodic connection drops. This is most noticeable when I play multiplayer games. I use Comcast ISP.[CODE]
View 3 Replies View RelatedCisco Firewall :: ASA 5515-X / How To Block The Multiplayer Games
Feb 27, 2013I just would like to know if possible to block the multiplayer games?? I'm using ASA 5515-X.
View 2 Replies View RelatedHow To Receive A Call From Modem
Aug 3, 2011i use my sim card in modem connected to pc to surf. is it possible to receive calls as i surf through this sim card?
View 1 Replies View RelatedCisco :: Call Forwarding Using FXO Ports?
Jun 28, 2012I have a telephony system already in place with 6 FXO active ports configured on a 2821 Router.The thing is that I am not able to make an ip phone forward calls to a mobile No.I can make calls to the same mobile number when dialed from the phone but the call routing seems not to function correctly when call-forward all is configured on the ephone-dn.I would like to focus only on voice-port 0/0/0 and 0/0/1?
voice-port 0/0/0
supervisory disconnect anytone
output attenuation -3
echo-cancel coverage 32
compand-type a-law
cptone GB
[code]....
Cisco :: Can't Log Into Call Manager Web Page?
May 2, 2012we are running callManager 7.1 (user accounts are tied to AD)... one night our call manager got rebooted by IT. upon reboot, CM failed over to the Subscriber node. Some how IT got Callmanger back over to the Publisher node.....No now of us can log into CallManager using our AD accounts...
View 2 Replies View RelatedGet Telephone Number Of Incoming Call?
Feb 1, 2012How to find the no of the incoming call by at commands.
View 1 Replies View RelatedCisco VPN :: 887 / VOIP Over VPN (30 Second Call Drops)
Dec 16, 2011I have a 887 setup as a EasyVPN server, and a 861 as an EasyVPN remote - network extension mode with split tunnelling.This works fine - I can ping and connect to machines across the tunnel.However if I setup a VOIP handset to connect across the tunnel it registers and calls work, but drop after 30secs....I know this is normally a firewall or nat problem, are easyvpns firewalled or natted?
View 9 Replies View RelatedCisco :: Setup The ATA 186 As A SIP Device With Call Manager 7?
Jul 30, 2012I would like to use the Cisco ATA 186 as a SIP device with Cisco Call Manager 7. However, I have found that the SIP firmware for the Cisco ATA 186 is unsupported by Call Manager 7.Therefore, In order to use the ATA as a SIP device with the Call Manager, I believe I will need setup the ATA as a 3rd Party SIP device by doing the following:
1. Disable the TFTP option within the ATA, so that the SIP firmware is not overwritten by firmware from the TFTP server.
2. Install the 3.2.1 SIP firmware on the ATA, since the ATA is currently running the 3.2.4 SCCP firmware.
3. Register the ATA, as a third-party SIP device, with the Call Manager .Should I register the ATA as a 3rd party device?
Cisco :: Video Call From 9971 To Ipad2?
Mar 17, 2011Is it possible for a 9971 and ipad2 to have a video call either with Webex or another app? We're getting both soon, just seeing if anyone has tested it yet.
View 3 Replies View RelatedCisco :: Call Attendant Running In Background
Feb 14, 2013How to run Cisco call attendant running in the background.I have a user (who’s giving me a headache) that wants the Call attendant software to not pop-up when a call come in.She doesnt want to lose her mouse cursor when call comes in.I have looked at the call attendant user guide and not able to find this feature.This user says that the previous Network admin did something to run it in the background.
View 1 Replies View RelatedWhy GPRS Data Gets Disconnected When Call Comes On Mobile
Aug 19, 2011I have seen that when ever i am using the packet data connection (GPRS/EDGE) on mobile and if a Voice Call comes, the Package data will be stopped and once the call gets disconnected it will resume sending the data.For 3G Data the same is not happening, at the time of voice call it will continue sending the Packet data.
View 1 Replies View RelatedD-Link DIR-655 :: 14:57 Minutes On Hold Just To Get Call Dropped?
Aug 18, 2011one last try before boxing up my new DIR-655 and taking it back to Microcenter. I've opened a case via email and got the standard response, below.I have a Dlink DP-300U print server that works fine with my 'old' Belkin router, a F5D-7230-4 wireless unit. Nothing wrong with the Belkin, I'm just getting some service drops from my lousy AT&T ifitl 1.5mbps ISP and thought a new router might work. I actually read the manual (!!) before installing the DIR-655 and even followed it. The print server just isn't visible on the network. Everything else is, though. The 'suggestions' from Dlink tech support below are very useful. If I could 'see' the print server to verify its IP address, we wouldn't be having this conversation. I've rebooted everything, several times and even reinstalled my old Belkin router (which always sees the print server.) And Dlink, no...I'm not interested in paying you $32.95 for up to a half hour to maybe fix a problem caused by your new device. And dropping my call after almost 15 minutes on hold is not cool, either. With reference to the issue you are facing, we suggest you to kindly ensure that the IP address assigned to DP-300U print server is in the same network range as that of your DIR-655.
NOTE: The default IP address of DIR-655 is 192.168.0.1 Once it is done, try to ping the IP address of DP-300U using any of the wired / wireless client connected to DIR-655.note the DP-300U is not currently supported in North America. D-Link offers a premium fee based support line that will be able to support any issues you have with this product.
Linksys Cable / DSL :: WRP-400 And Direct Call Between Lines?
Aug 13, 2011The WRP-400 router has two phone ports - does it support direct calls between them?
View 1 Replies View RelatedCisco WAN :: 2800 Potential Mute Call
Dec 11, 2011I a using a Ciscoet 2800 Series router with a Call Manager 5.0.1. When I make a call I g this error:
*Dec 12 20:30:38.575 Potential Mute Call:
*Dec 12 20:30:38.575 Call ID1=3 Call ID2=4 ConfID=2
*Dec 12 20:30:38 575 Leg1: CallID=3; TX Packets 398; RX Packets 400;
*Dec 12 20:30:38 565 Leg 2: CallID=4 TX Packets 398; RX Packets 400;
I can be heard but do not here anything. No ringback at all.
Cisco :: Call Manager And IP Phones In LMS 4.1 Topology
Jul 29, 2012I have installed LMS 4.1 and discover all the devices (router/switches) but i want to show IP Phone on the LMS. I am unable to discover call manager in LMS 4.1 topology.
In Call Manager 8.6 in Cisco Serviceability under snmp setting i have enable the read community string and check snmp, MIB service are running.AM i using the correct proecdure. How can i get the Call Manager on LMS server so that i can see IP phones on LMS topology. 8.6 is installed on VM Ware.
Cisco :: Call Manager Server 8.6 In LMS 4.1 Discovery
Jul 30, 2012I setup one network where LMS is in subnet 192.168.5.0/24 and CUCM is in subnet 192.168.1.0/24. both are reachabe to each other and both are also in different EVN/VRF. when i try to discover the CUCM from LMS 4.1. It discover only routers and switches. I am unable to find any CUCM 8.6 server, i did the snmp read community setting in call manager under serviceability.
In addition, IP phones are appeared as END host not as IP Phones. (find attached image)
Cisco WAN :: 3750G QoS And Voice Call Break Ups
Mar 6, 2011We have installed a SRST in one of our remote offices. They have ISDN Primary, and we have a 6mb MPLS link to our main HQ with 400k of QoS on the line. During the day, both Internal calls over the MPLS and external calls over the ISDN break up, but it doesnt happen all the time, i.e in a day the morning will be ok, then the users experience the break ups in the afternoon, then its everything is ok again.
The only factor that the calls share is the Lan infrastructure i.e the 3750G switches (7) of them which are stacked.We did have MAC flapping errors, and our telecoms provider suggested that it maybe these causing the issues, however we have got rid of all MAC flap errors, and are still receiving voice break ups.
Because the Lan switches are the only "item" both calls share, I am wondering now if the setup of the switches is correct. [code]
Cisco :: Dial Digits For IVR After Initial Call Completion Through SIP?
Jan 23, 2013I have a 2811 with CME 8.5; I recently added a SIP trunk and can make & receive calls just fine. I noticed today that when connecting to an external IVR system, I can't send additional tones (press 1 for Sales, for example). I have two DIDs, same provider, both doing the same thing. The config for one of my SIP trunk dial peer and translations are shown here - I think this is what's appropriate to review but can add anything else that's necessary. I've also omitted some dial peers for X11 and international dialing for brevity.
View 2 Replies View RelatedCisco :: Call Manager Hunt Group Configuration?
Mar 28, 2012create a hunt group for the people on call. I have plane this below configuration so far, and I would like to associate the cisco ip phone number with the personal mobile.
1) how can I associate the office number with the mobile one?
2)how and where I set up the forward no answer?
1) Create a line group, and add lines according to the user that we have in the group. Set the Distribution Algorithm to Circular.[URL] I need to create 1 line group per each user. Step to create a line
a)Choose Call Routing > Route/Hunt > Line Group
b)To add a new line group, click the Add New button
c)n the Line Group Configuration window that displays, enter a name in the Line Group Name field. The name can contain up to 50 alphanumeric characters and can contain any combination of spaces,
periods (.), hyphens (-), and underscore characters (_). Ensure that each line group name is unique to the route plan.
d)Choose the appropriate settings as described in Table 36-1. Table link ( http://www.cisco.com/en/US/docs/voice_i ... #wp1053560 )
e)To add or update this line group, click Save.
2) Create a hunt list, and add the line group Step to create a hunt list
a)Choose Call Routing > Route/Hunt > Hunt List.
b)Click Add new
c)In the Hunt List Name field, enter a name. The name can comprise up to 50 alphanumeric characters and can contain any combination of spaces, periods (.), hyphens (-), and underscore characters (_). Ensure each hunt list name is unique to the route plan.
d)In the Hunt List Name field, enter a name. The name can comprise up to 50 alphanumeric characters and can contain any combination of spaces, periods (.), hyphens (-), and underscore characters (_). Ensure each hunt list name is unique to the route plan.
e)To add this hunt list, click save
f)The system checks the Enable this Hunt List check box by default for the new hunt list.
g)Add at least one line group to the new hunt list.Adding Line Groups to a Hunt List (Associate a line group to hunt group)
a)Choose Call Routing > Route/Hunt > Hunt List.
b)Locate the hunt list to which you want to add a line group
c)To add a line group, click Add Line Group.The Hunt List Detail Configuration window displays.
d)From the Line Group drop-down list box, choose a line group to add to the hunt list.
e)To add the line group, click Save.The line group name displays in the Hunt List Details list on the left side of the window.
f)To add more line groups to this list, click Add Line Group and repeat Step c through Step e.
h)Click save and then to click reset to reset the hunt list. When the popup windows display, click OK.
Cisco :: Call Manager 8 Not Routing Calls To MGCP?
Oct 5, 2011I have CUCM 8.5 in a lab environment that connects to a Cisco 2801 which has a VIC2 FXO card on board, I have believe that I have configured the MGCP correctly and also configured my CUCM correctly but I'm just getting a fast busy when I make a call through the PSTN, I have tried removing the Ethernet cable from the Router just to test what happens when I dial external and again I get fast bust.
Here is my configuration setting: -
From CUCM gateway details:
Gateway Name MGCP
Protocol MGCP
AALN/S0/SU1/0@MGCP
AALN/S0/SU1/1@MGCP
AALN/S0/SU1/2@MGCP
AALN/S0/SU1/3@MGCP
[code]....
Call A Router As Data Link Layer Device
Feb 15, 2013What is the reason to call a router as data link layer device
View 1 Replies View RelatedCisco :: Device Package For Call Manager To Install In LMS 3.2?
Mar 27, 2012regarding device package for Cisco MCS 7835-I3 [Cisco 7800 Series Media Convergence Servers] . I have added Call manager in LMS 3.2.1 but showing ? as there is no device package installed in LMS.
View 2 Replies View RelatedCisco WAN :: 1841 - High CPU Utilization When Skype Call Over VPN
Jul 22, 2012Cisco IOS Software, 1841 Software (C1841-ADVENTERPRISEK9-M), Version 15.1(4)M2, RELEASE SOFTWARE (fc1)
When the client on a Branch Office LAN realizes calls to skype, there is a sharp loading of CPU on Branch router Cisco1841 (all Inet traffic goes through DMVPN-Tunnel Interface to proxy on Central Office).
[code]....