Get Telephone Number Of Incoming Call?
Feb 1, 2012How to find the no of the incoming call by at commands.
View 1 Replies
ADVERTISEMENT
Home Network :: Which Computers Is Running Skype Application That Will Answer Incoming Call
Feb 15, 2013I have a standard ADSL modem which connects to the internet. On the inside I have a few computers within my LAN.when the modem receives an incoming request from the internet for a connection to one of my LAN computers e.g. a Skype incoming call, how does the modem know which port to forward that traffic to on my internal LAN? i.e. how does the modem know which of my computers is running the skype application that will answer the incoming call? I know port forwarding normally handles this sort of thing, but in my case, I am not using any configured port forwarding rules so how does the modem know where to forward skype traffic?
View 2 Replies View RelatedInternet Disconnects When Use The Telephone?
Sep 1, 2012Our telephone point is downstairs in the lounge. We then have a long lead which we have run from the Eircom point in the lounge to upstairs into our son's room. This lead has a splitter on the end which is in our sons room. We have the Eircom modem connected to the splitter and to our sons computer, which is a Dell XPS 630 and which has no built in modem. The cordless telephone is connected to the other port on the splitter. The splitter has two ports one for telephone one for broadband. We also have another PC and two laptops. The second PC and the laptops are wireless.
The problem seems to happen when our son is in the middle of a game (he's a bit World of Warcraft gamer!) and I then use the phone and he loses the connection and then there's troublWe have had the line tested by our telephone/broadband provider and have tried connecting the telephone and the modem directly into the telephone point and we have been told there is no fault on the Eircom line. We only become aware of the problem when he's gaming and the phone is used
How To Run Telephone Line And Network In 1 Cat5e
Jan 25, 2012Can i run a telephone line (UK BT) and a network connection in 1 x cat5e, this is to work a uk sky tv/internet box which requires a telephone line and an internet connection for its on demand side?
View 5 Replies View RelatedInstalling 2 Adsl Routers On One Telephone Line
Mar 28, 2011Can I install 2 ADSL routers on one telephone line with SKY. If I can does this mean that if sky give me 20mb connection, I can get two lots of 20mb using the two routers.
View 2 Replies View RelatedLinksys 1200 Router On Telephone Don't Work
Feb 7, 2013Right now I have a westlll a90 750022 router working on a vista computer working fine but that's a rental. I have bought a Linksys E 1200 series router. The problem is now that when it is all hooked together our phones doesn't work, just dead that is, neither does the router.The router westell A90 from Century Tell works with a dual plug in, a DSL filter, the plug has one side for the phone line and the other for the DSL modem, in other words the westell router cannot be directly connected to the phone line.
View 1 Replies View RelatedHP OfficeJet 7310 - Fax Without Telephone Line With FiOS?
Dec 23, 2010I've got Verizon Triple Play. Basically, my Internet, TV and Phone all come into my house on a Fiber Optic line. Well, I take that back, I don't quite understand what the FiOS Phone really is or how the signaling works.
I have this All-in-One machine, the HP OfficeJet 7310 (link to product information). I hooked it up to my network (printer to router via Ethernet port) the other day and it works great with printing from all of my clients, well the printing does. I haven't tried the scanning portion, yet but I would assume it works just fine. What I didn't hook up, is a phone line to it. I wanted to know if there's a way to fax through my network, thus eliminating the need for a telephone connection. I figured there COULD be a way, if my Phone at some point came through the Fiber Optic.
Servers :: Connect 2 Personal Computers With Telephone Line?
Mar 29, 2011how to connect 2 personal computers with telephone line
View 1 Replies View RelatedPort Forwarding For Telephone Tech To Do Remote Maintenance - Is It Safe
Jun 4, 2012I just did small office transfer all their existing computers and equipment over to a new office site. They had new voice and data cables run, as well as patch panel and telephone and cable modem equipment set up in new office The private telephone tech requested that I port forward port 8000 to the telephone equipments' IP address He also requested that I provide the Office Static IP address to him My question is--am I opening this office's network up to any security risks by forwarding port 8000 to his telephone equipment's internal system IP address and providing him the actual Static IP address of the office Internet connection?
View 9 Replies View RelatedBroadband :: Telephone Line Jack Not Receiving Dial Tone On Laptop
Dec 26, 2011I can not get onto the internet via dial up. The message says that I have no dial tone. Using the same line, I get a dial tone on the phone. I can get onto the internet via a DSL connection, but it will not make a connection when I have a telehone line inserted in the phone line jack. This problem started after the power went off and on quickly two times. I have followed all the instructions that I have found to reset the modem, but to no avail. Is it possible that the phone line jack needs to be replaced.I have a gateway laptop with Vista program.
View 4 Replies View RelatedCisco :: Translate Called Number Based On Calling Number?
Mar 26, 2011I have some tunnels which terminate to my home router. I'm allowing the other ends of the tunnels to use my voice setup. I need to prepend *67 to all called numbers which don't originate from my house. I don't want people calling my home number based on the caller-id number they see when someone across one of the tunnels calls.
So if 5008 calls 212-333-4444 I want it sent to my provider as *672123334444. If 5001 calls a number, I don't want it touched. Can I do this? I can use IOS or CUCM here.
Linksys Wireless Router :: WRT54GL Versus Magic Jack VoIP Telephone
Feb 17, 2010I got my WRT54GL v1.1 yesterday and connected it to my pc [wired] and netbook [wireless]. I thought all was well until I noticed that my Magic Jack VoIP telephone began dropping calls after about 1 minute. My first course of action was to disable SPI firewall in router and reboot. That had no affect on the situation, then I noticed that my send light on my cale modem [ no manufacturer listed on unit] was not blinking as it has done before the router installation. I reverted to my cable modem to pc only set up and my Magic Jack worked just fine. I need to use the router for wireless, so I need to find a solution to this problem. I took a look at my firmware version and saw that it was not current, but I wanted to bring my problem here for a possible solution be for I flashed new firmware.
View 9 Replies View RelatedHow To Receive A Call From Modem
Aug 3, 2011i use my sim card in modem connected to pc to surf. is it possible to receive calls as i surf through this sim card?
View 1 Replies View RelatedCisco :: Call Forwarding Using FXO Ports?
Jun 28, 2012I have a telephony system already in place with 6 FXO active ports configured on a 2821 Router.The thing is that I am not able to make an ip phone forward calls to a mobile No.I can make calls to the same mobile number when dialed from the phone but the call routing seems not to function correctly when call-forward all is configured on the ephone-dn.I would like to focus only on voice-port 0/0/0 and 0/0/1?
voice-port 0/0/0
supervisory disconnect anytone
output attenuation -3
echo-cancel coverage 32
compand-type a-law
cptone GB
[code]....
Cisco :: Can't Log Into Call Manager Web Page?
May 2, 2012we are running callManager 7.1 (user accounts are tied to AD)... one night our call manager got rebooted by IT. upon reboot, CM failed over to the Subscriber node. Some how IT got Callmanger back over to the Publisher node.....No now of us can log into CallManager using our AD accounts...
View 2 Replies View RelatedHow To Play Multiplayer Call Of Duty
Dec 17, 2011In Age of Empires ESO will let me log in to game, but fail to join games in lobby
View 1 Replies View RelatedCisco VPN :: 887 / VOIP Over VPN (30 Second Call Drops)
Dec 16, 2011I have a 887 setup as a EasyVPN server, and a 861 as an EasyVPN remote - network extension mode with split tunnelling.This works fine - I can ping and connect to machines across the tunnel.However if I setup a VOIP handset to connect across the tunnel it registers and calls work, but drop after 30secs....I know this is normally a firewall or nat problem, are easyvpns firewalled or natted?
View 9 Replies View RelatedCisco :: Setup The ATA 186 As A SIP Device With Call Manager 7?
Jul 30, 2012I would like to use the Cisco ATA 186 as a SIP device with Cisco Call Manager 7. However, I have found that the SIP firmware for the Cisco ATA 186 is unsupported by Call Manager 7.Therefore, In order to use the ATA as a SIP device with the Call Manager, I believe I will need setup the ATA as a 3rd Party SIP device by doing the following:
1. Disable the TFTP option within the ATA, so that the SIP firmware is not overwritten by firmware from the TFTP server.
2. Install the 3.2.1 SIP firmware on the ATA, since the ATA is currently running the 3.2.4 SCCP firmware.
3. Register the ATA, as a third-party SIP device, with the Call Manager .Should I register the ATA as a 3rd party device?
Cisco :: Video Call From 9971 To Ipad2?
Mar 17, 2011Is it possible for a 9971 and ipad2 to have a video call either with Webex or another app? We're getting both soon, just seeing if anyone has tested it yet.
View 3 Replies View RelatedCisco :: Call Attendant Running In Background
Feb 14, 2013How to run Cisco call attendant running in the background.I have a user (who’s giving me a headache) that wants the Call attendant software to not pop-up when a call come in.She doesnt want to lose her mouse cursor when call comes in.I have looked at the call attendant user guide and not able to find this feature.This user says that the previous Network admin did something to run it in the background.
View 1 Replies View RelatedWhy GPRS Data Gets Disconnected When Call Comes On Mobile
Aug 19, 2011I have seen that when ever i am using the packet data connection (GPRS/EDGE) on mobile and if a Voice Call comes, the Package data will be stopped and once the call gets disconnected it will resume sending the data.For 3G Data the same is not happening, at the time of voice call it will continue sending the Packet data.
View 1 Replies View RelatedD-Link DIR-655 :: 14:57 Minutes On Hold Just To Get Call Dropped?
Aug 18, 2011one last try before boxing up my new DIR-655 and taking it back to Microcenter. I've opened a case via email and got the standard response, below.I have a Dlink DP-300U print server that works fine with my 'old' Belkin router, a F5D-7230-4 wireless unit. Nothing wrong with the Belkin, I'm just getting some service drops from my lousy AT&T ifitl 1.5mbps ISP and thought a new router might work. I actually read the manual (!!) before installing the DIR-655 and even followed it. The print server just isn't visible on the network. Everything else is, though. The 'suggestions' from Dlink tech support below are very useful. If I could 'see' the print server to verify its IP address, we wouldn't be having this conversation. I've rebooted everything, several times and even reinstalled my old Belkin router (which always sees the print server.) And Dlink, no...I'm not interested in paying you $32.95 for up to a half hour to maybe fix a problem caused by your new device. And dropping my call after almost 15 minutes on hold is not cool, either. With reference to the issue you are facing, we suggest you to kindly ensure that the IP address assigned to DP-300U print server is in the same network range as that of your DIR-655.
NOTE: The default IP address of DIR-655 is 192.168.0.1 Once it is done, try to ping the IP address of DP-300U using any of the wired / wireless client connected to DIR-655.note the DP-300U is not currently supported in North America. D-Link offers a premium fee based support line that will be able to support any issues you have with this product.
Linksys Cable / DSL :: WRP-400 And Direct Call Between Lines?
Aug 13, 2011The WRP-400 router has two phone ports - does it support direct calls between them?
View 1 Replies View RelatedCisco WAN :: 2800 Potential Mute Call
Dec 11, 2011I a using a Ciscoet 2800 Series router with a Call Manager 5.0.1. When I make a call I g this error:
*Dec 12 20:30:38.575 Potential Mute Call:
*Dec 12 20:30:38.575 Call ID1=3 Call ID2=4 ConfID=2
*Dec 12 20:30:38 575 Leg1: CallID=3; TX Packets 398; RX Packets 400;
*Dec 12 20:30:38 565 Leg 2: CallID=4 TX Packets 398; RX Packets 400;
I can be heard but do not here anything. No ringback at all.
Cisco :: Call Manager And IP Phones In LMS 4.1 Topology
Jul 29, 2012I have installed LMS 4.1 and discover all the devices (router/switches) but i want to show IP Phone on the LMS. I am unable to discover call manager in LMS 4.1 topology.
In Call Manager 8.6 in Cisco Serviceability under snmp setting i have enable the read community string and check snmp, MIB service are running.AM i using the correct proecdure. How can i get the Call Manager on LMS server so that i can see IP phones on LMS topology. 8.6 is installed on VM Ware.
Cisco :: Call Manager Server 8.6 In LMS 4.1 Discovery
Jul 30, 2012I setup one network where LMS is in subnet 192.168.5.0/24 and CUCM is in subnet 192.168.1.0/24. both are reachabe to each other and both are also in different EVN/VRF. when i try to discover the CUCM from LMS 4.1. It discover only routers and switches. I am unable to find any CUCM 8.6 server, i did the snmp read community setting in call manager under serviceability.
In addition, IP phones are appeared as END host not as IP Phones. (find attached image)
Cisco WAN :: 3750G QoS And Voice Call Break Ups
Mar 6, 2011We have installed a SRST in one of our remote offices. They have ISDN Primary, and we have a 6mb MPLS link to our main HQ with 400k of QoS on the line. During the day, both Internal calls over the MPLS and external calls over the ISDN break up, but it doesnt happen all the time, i.e in a day the morning will be ok, then the users experience the break ups in the afternoon, then its everything is ok again.
The only factor that the calls share is the Lan infrastructure i.e the 3750G switches (7) of them which are stacked.We did have MAC flapping errors, and our telecoms provider suggested that it maybe these causing the issues, however we have got rid of all MAC flap errors, and are still receiving voice break ups.
Because the Lan switches are the only "item" both calls share, I am wondering now if the setup of the switches is correct. [code]
Cisco :: Dial Digits For IVR After Initial Call Completion Through SIP?
Jan 23, 2013I have a 2811 with CME 8.5; I recently added a SIP trunk and can make & receive calls just fine. I noticed today that when connecting to an external IVR system, I can't send additional tones (press 1 for Sales, for example). I have two DIDs, same provider, both doing the same thing. The config for one of my SIP trunk dial peer and translations are shown here - I think this is what's appropriate to review but can add anything else that's necessary. I've also omitted some dial peers for X11 and international dialing for brevity.
View 2 Replies View RelatedCisco :: Call Manager Hunt Group Configuration?
Mar 28, 2012create a hunt group for the people on call. I have plane this below configuration so far, and I would like to associate the cisco ip phone number with the personal mobile.
1) how can I associate the office number with the mobile one?
2)how and where I set up the forward no answer?
1) Create a line group, and add lines according to the user that we have in the group. Set the Distribution Algorithm to Circular.[URL] I need to create 1 line group per each user. Step to create a line
a)Choose Call Routing > Route/Hunt > Line Group
b)To add a new line group, click the Add New button
c)n the Line Group Configuration window that displays, enter a name in the Line Group Name field. The name can contain up to 50 alphanumeric characters and can contain any combination of spaces,
periods (.), hyphens (-), and underscore characters (_). Ensure that each line group name is unique to the route plan.
d)Choose the appropriate settings as described in Table 36-1. Table link ( http://www.cisco.com/en/US/docs/voice_i ... #wp1053560 )
e)To add or update this line group, click Save.
2) Create a hunt list, and add the line group Step to create a hunt list
a)Choose Call Routing > Route/Hunt > Hunt List.
b)Click Add new
c)In the Hunt List Name field, enter a name. The name can comprise up to 50 alphanumeric characters and can contain any combination of spaces, periods (.), hyphens (-), and underscore characters (_). Ensure each hunt list name is unique to the route plan.
d)In the Hunt List Name field, enter a name. The name can comprise up to 50 alphanumeric characters and can contain any combination of spaces, periods (.), hyphens (-), and underscore characters (_). Ensure each hunt list name is unique to the route plan.
e)To add this hunt list, click save
f)The system checks the Enable this Hunt List check box by default for the new hunt list.
g)Add at least one line group to the new hunt list.Adding Line Groups to a Hunt List (Associate a line group to hunt group)
a)Choose Call Routing > Route/Hunt > Hunt List.
b)Locate the hunt list to which you want to add a line group
c)To add a line group, click Add Line Group.The Hunt List Detail Configuration window displays.
d)From the Line Group drop-down list box, choose a line group to add to the hunt list.
e)To add the line group, click Save.The line group name displays in the Hunt List Details list on the left side of the window.
f)To add more line groups to this list, click Add Line Group and repeat Step c through Step e.
h)Click save and then to click reset to reset the hunt list. When the popup windows display, click OK.
Cisco :: Call Manager 8 Not Routing Calls To MGCP?
Oct 5, 2011I have CUCM 8.5 in a lab environment that connects to a Cisco 2801 which has a VIC2 FXO card on board, I have believe that I have configured the MGCP correctly and also configured my CUCM correctly but I'm just getting a fast busy when I make a call through the PSTN, I have tried removing the Ethernet cable from the Router just to test what happens when I dial external and again I get fast bust.
Here is my configuration setting: -
From CUCM gateway details:
Gateway Name MGCP
Protocol MGCP
AALN/S0/SU1/0@MGCP
AALN/S0/SU1/1@MGCP
AALN/S0/SU1/2@MGCP
AALN/S0/SU1/3@MGCP
[code]....
Call A Router As Data Link Layer Device
Feb 15, 2013What is the reason to call a router as data link layer device
View 1 Replies View RelatedD-Link DIR-655 :: NAT Type Strict For Call Of Duty Black Ops
Jan 12, 2011i followed the instructions on the link and I can not for the life of me get my NAT to display OPEN or even Moderate. Always says STRICT. I have tried all the link and all the videos about forwarding ports followed all the instructions to the T. But the PS3 in the DMZ. And still, Nothing. It's BS.
Using router FW: 2.00NA
Ports Forwarded: TCP 80-81,443,5223
UDP 2005,3074,3075
TCP 3074
UDP 3478
Assigned QOS engine rule to the IP of my PlayStation and set it to priority 1.UDP Endport Filtering and TCP Endport Filtering Both set to independent?Enabled Anti-Spoof Checking?
Cisco :: Device Package For Call Manager To Install In LMS 3.2?
Mar 27, 2012regarding device package for Cisco MCS 7835-I3 [Cisco 7800 Series Media Convergence Servers] . I have added Call manager in LMS 3.2.1 but showing ? as there is no device package installed in LMS.
View 2 Replies View Related