Servers :: Connect 2 Personal Computers With Telephone Line?
Mar 29, 2011how to connect 2 personal computers with telephone line
View 1 Replies
ADVERTISEMENT
How To Run Telephone Line And Network In 1 Cat5e
Jan 25, 2012Can i run a telephone line (UK BT) and a network connection in 1 x cat5e, this is to work a uk sky tv/internet box which requires a telephone line and an internet connection for its on demand side?
View 5 Replies View RelatedInstalling 2 Adsl Routers On One Telephone Line
Mar 28, 2011Can I install 2 ADSL routers on one telephone line with SKY. If I can does this mean that if sky give me 20mb connection, I can get two lots of 20mb using the two routers.
View 2 Replies View RelatedHP OfficeJet 7310 - Fax Without Telephone Line With FiOS?
Dec 23, 2010I've got Verizon Triple Play. Basically, my Internet, TV and Phone all come into my house on a Fiber Optic line. Well, I take that back, I don't quite understand what the FiOS Phone really is or how the signaling works.
I have this All-in-One machine, the HP OfficeJet 7310 (link to product information). I hooked it up to my network (printer to router via Ethernet port) the other day and it works great with printing from all of my clients, well the printing does. I haven't tried the scanning portion, yet but I would assume it works just fine. What I didn't hook up, is a phone line to it. I wanted to know if there's a way to fax through my network, thus eliminating the need for a telephone connection. I figured there COULD be a way, if my Phone at some point came through the Fiber Optic.
Broadband :: Telephone Line Jack Not Receiving Dial Tone On Laptop
Dec 26, 2011I can not get onto the internet via dial up. The message says that I have no dial tone. Using the same line, I get a dial tone on the phone. I can get onto the internet via a DSL connection, but it will not make a connection when I have a telehone line inserted in the phone line jack. This problem started after the power went off and on quickly two times. I have followed all the instructions that I have found to reset the modem, but to no avail. Is it possible that the phone line jack needs to be replaced.I have a gateway laptop with Vista program.
View 4 Replies View RelatedTo Connect Two Computers Via Phone Line
Mar 20, 2011I want to put a laptop in the barn, with a web cam. I have a phone line (with spare wires) running to the barn and I want to connect my house laptop to the one in the barn.How do I do this?
View 1 Replies View RelatedCisco :: Clear Line Command On Access Servers?
Oct 14, 2012On my old 2511 access server, I could issue "clear line x" to close a session on an existing line.this doesn't seem to work on my new 2600XM with NM-16A access server (12.3(20)IOS), any command in newer IOS?
View 4 Replies View RelatedCan't Connect To WPA2 Personal On Router
Sep 28, 2012I just bought a new samsung laptop and i was not able to connect to my wireless router
--I go into Wireless Network Connection and i am able to see my router along with the other routers in the area
--I try to connect it doesnt let me, i change the pw on my router doesnt let me, i remove the pw from the router doesnt let me.
--I connect a Ethernet cable to my laptop, im able to connect.
--i Go to the samsung website dl all the drivers for the wireless network, cant connect
--I use a wirelss adapter that i have for my desktop which works on my desktop, it cant connect
--i grab my little brothers cell phone and activate wireless hotspot, i can connect
--i switch my router settings from WPA2 Personal to WPA, i can connect
--while connect to WPA i switch it back over to WPA2 personal, i get disconnected.
my question now is. why cant i connected to WPA2 personal? Is my connectivity limited on my laptop? can i only connect via WPA or WEP?
--Asus wireless router i connect my tablet,cell phone adapter with my desktop, 2 other phones, another 2 laptops, 2 other tablets and another desktop to it. I never had an issue with any of these items.
--Windows 7 on all machine except for Linux on 1 laptop.
--Samsung laptop has all the windows updates install and all the drivers for the network and even gpu up to date.
Servers :: How To See Computers In Network
Jan 25, 2011I have a 2008 domain with win7 computers and winxp clients, i am able to see the win7 clients but not the winxp nor the servers in the network neighbourhood, ping works fineI can browse through a system on the network, but unable to have a broad view of the computers
View 1 Replies View Related2510G Switches Sharing Single 1Gb Line To Servers But Internet Slow
Oct 13, 2011About a week ago I changed over 9 HP Procurve switches that were previously stacking in series (yeah, daisy-chain) to a Access-Distribution type scenario with 2 (or 4 on server switches) Gb ports on each switch Trunked together connecting to a central full 48x Gb switch.
During this I updated firmwares on all the switches (most still on their shipped 5-8 year old versions) to the latest stable release (and in the process found out that HP switch firmware is absolutely brutal and untested - See ProCurve 2510G FW 11.16 as an example) .
I saw vast improvements across the network immediately after the change (wow, really? 9 48-port switches effectively sharing a single 1Gb line to the servers and internet was a bit slow? Don't tell my co-workers, they don't think that's possible ) .
The only thing that I didn't see an improvement in was on some Linux and BSD servers, which would top out at 11MB/s doing a SMB (SAMBA) transfer. These are managed systems part of our business system, but we still need to be able to pull local backups for ourselves. So I contacted our vendor. The vendor confirmed that the line speed is showing as 1000T-FDx (same as the switch is showing).
Vendor is now claiming that after these changes were put in place, the speed on their servers (and their servers ONLY) was reduced to a maximum of 5MB/s (~60Mb/s?) doing rsync transfers between themselves. And they are all on the same 2510 (48 port all 10/100/1000), which makes absolutely no sense whatsoever to me. Furthermore this is on the ONLY switch on the entire network that had an updated firmware already installed - that's not even a possibility here.
I put some windows servers on that switch and can get 60MB/s+ all day (SMB transfers). I've also tried from their one server that I can access to doing an rsync or scp to another BSD box, and max out at 15MB/s (with 100% CPU usage on the test box - I'm assuming the decryption is pretty heavy?)There is absolutely no QoS, limiting, or any possibility of throttling the links the servers are on the switch. There are no excessive broadcasts saturating it, and the ports and cables test fine.
Servers :: How To Share CD Drive To All The Computers
Aug 29, 2011I work as a System Administrator for a small company. Can i share a CD drive to all the computers in my domain. Or does this require any additional software to do all this. Because i tried to do it normally by sharing that CD drive and by which it was also available in my network. But when i was trying to access that it says "The drive is not ready". We use Windows operating system in our network. I even tried to google this but i could not find any exact answer for this till now.
View 3 Replies View RelatedServers :: DNS Mapping Does Not Work On Computers?
Jun 25, 2012I've been trying to map a specific domain name (say a.net) to a local (static) IP of a computer on that specific network, running Apache and used as a server.I did this by setting the Static DNS mapping configuration on my Dynalink RTA-1025W management panel.That works flewlessly on my iPhone and iPad, but does not work at all on any computer - desktop or laptop, Mac or PC, WiFi or LAN (tried a few desktop PCs, an iMac, a PC notebook and a MacBook Pro). On all of them, the browser is uncapable of resolving the DNS mapping, showing an error such us "Server Not Found".The only way I could override that behavior is modifying the hosts file, and that is not a solution for me, as the network is used by guest machines (say, as a public WiFi in an hotel).Is there a better approach for that?
View 16 Replies View RelatedClient Automatically Connect To Personal Folder On Domain Server
Mar 10, 2013I have created individual folders for the different users on the network domain server, but i am having trouble allowing the client to automatically connect to their personal folder.
View 2 Replies View RelatedLinksys Wireless Router :: E1000 Cannot Connect To Personal Website
Oct 27, 2011I own an E1000. It is hooked up to a Motorola cable modem via Comcast. I have a personal website sohebvahora.com (still under construction) where I use cpanel to administer it. I somehow lost all connectivity to my website midday and have not been able to connect back to it in a few days. Every other site I have gone to works except mine. It doesn't make sense.Also, I tried connecting my laptop directly to the Motorola modem and my personal site loads, so it has to be the router. I have tried different devices connected to the router as well, like my ipad, iphone, and other laptops, but the website doesnt load on them either
View 7 Replies View Related2 Servers 2008 / 20 Windows 7 Computers - 10 And 100 MB Speed?
Oct 1, 2011I have 2 servers 2008 & 20 computers win 7 i need to give for 10 MB Speed for some computers and the others computers 100 MB Speed How?
View 1 Replies View RelatedServers :: Connect 5 Servers Together To Create A Private Network?
Apr 16, 2011i'm trying to connect 5 servers together to create a private network.Each server has a network of it's own and i'm trying to make all 5 servers communicate with each other to share and search data simultaneously..
View 16 Replies View RelatedInternet Disconnects When Use The Telephone?
Sep 1, 2012Our telephone point is downstairs in the lounge. We then have a long lead which we have run from the Eircom point in the lounge to upstairs into our son's room. This lead has a splitter on the end which is in our sons room. We have the Eircom modem connected to the splitter and to our sons computer, which is a Dell XPS 630 and which has no built in modem. The cordless telephone is connected to the other port on the splitter. The splitter has two ports one for telephone one for broadband. We also have another PC and two laptops. The second PC and the laptops are wireless.
The problem seems to happen when our son is in the middle of a game (he's a bit World of Warcraft gamer!) and I then use the phone and he loses the connection and then there's troublWe have had the line tested by our telephone/broadband provider and have tried connecting the telephone and the modem directly into the telephone point and we have been told there is no fault on the Eircom line. We only become aware of the problem when he's gaming and the phone is used
Get Telephone Number Of Incoming Call?
Feb 1, 2012How to find the no of the incoming call by at commands.
View 1 Replies View RelatedLinksys 1200 Router On Telephone Don't Work
Feb 7, 2013Right now I have a westlll a90 750022 router working on a vista computer working fine but that's a rental. I have bought a Linksys E 1200 series router. The problem is now that when it is all hooked together our phones doesn't work, just dead that is, neither does the router.The router westell A90 from Century Tell works with a dual plug in, a DSL filter, the plug has one side for the phone line and the other for the DSL modem, in other words the westell router cannot be directly connected to the phone line.
View 1 Replies View RelatedPort Forwarding For Telephone Tech To Do Remote Maintenance - Is It Safe
Jun 4, 2012I just did small office transfer all their existing computers and equipment over to a new office site. They had new voice and data cables run, as well as patch panel and telephone and cable modem equipment set up in new office The private telephone tech requested that I port forward port 8000 to the telephone equipments' IP address He also requested that I provide the Office Static IP address to him My question is--am I opening this office's network up to any security risks by forwarding port 8000 to his telephone equipment's internal system IP address and providing him the actual Static IP address of the office Internet connection?
View 9 Replies View RelatedCisco :: Line Usage In Case Of Show Line On 2500 Series?
Oct 10, 2012Cisco 2500 series access servers show line usage with the "show line" command:
View 2 Replies View RelatedLinksys Wireless Router :: WRT54GL Versus Magic Jack VoIP Telephone
Feb 17, 2010I got my WRT54GL v1.1 yesterday and connected it to my pc [wired] and netbook [wireless]. I thought all was well until I noticed that my Magic Jack VoIP telephone began dropping calls after about 1 minute. My first course of action was to disable SPI firewall in router and reboot. That had no affect on the situation, then I noticed that my send light on my cale modem [ no manufacturer listed on unit] was not blinking as it has done before the router installation. I reverted to my cable modem to pc only set up and my Magic Jack worked just fine. I need to use the router for wireless, so I need to find a solution to this problem. I took a look at my firmware version and saw that it was not current, but I wanted to bring my problem here for a possible solution be for I flashed new firmware.
View 9 Replies View RelatedHow To Connect Diginet Line To LAN
Apr 22, 2013We have approximately 20 users on our LAN, i need to connect a Diginet line that a client has installed that we have a "dedicated" connection to them, we have got an ADSL router that is connected to the lan for internet connectivity, and we need to access the client specificallly via the Diginet line.
View 1 Replies View RelatedConnect Lan To A Second Internet Line
Sep 21, 2012how can i fetch (feed) the internet from Network2 to Network1? so that the wired pc can access ADSL#2
Network1 (home): wireless Router connected to ADSL#1, with 2 wired pcs
Network2 (neighbor): wireless Router connected to ADSL#2 (this network is only accessible by wireless in one room, i can't take a cable from this router)
How To Connect Phone Line To Router
Jan 26, 2012I have a router that i want to connect to my direct tv box. The router only has Ethernet cables on the back and no room for a phone line. how can I connect the phone line to the router?
View 1 Replies View RelatedServers :: Switch / Hub Sufficient To Connect All PC's To Modem To Connect To Internet?
Apr 12, 2011I am in the process of opening an internet cafe. I dont know exactly what a pc server does on the network... or do I really need one? Is the switch/hub sufficent to connect all pcs to the moderm to connect to the internet?
View 1 Replies View RelatedBroadband :: Connect 2 ADSL Routers On 1 BT Line?
Feb 19, 2011Our church has 1 phone line, we run BTBusiness Broadband at one of the building where we have a couple of charities based. We have the phone line connected to an extension at the other end (where the Church is) >80m away. Any way of running a second concurrent router on the extension so I can set up an office with a VOIP number, pC's printers etc there too? We use Devolo ethernet over mains and wireless for the main building, but the church itself is on a completely seperate mains power supply so I can't use that. I could run 100m Cat 5 and locate a switch on that, but any way of achieving something similar over the phone cable which is already in place.
View 2 Replies View RelatedUsing Power Line Adapters To Connect To The Router?
Dec 4, 2012Two of us were using power line adapters to connect to the router. We had no problems whatsoever. Then my other friend got a power line adapter and starte connecting that way too. Then pretty much both mine and his stopped working. Yet my other friend can still use his no problem.I ran and ipconfig /all and I'm noticing that its not giving me a default gateway address. I tried inputting it manually and still nothing. My windows 7 pc keeps saying it can't identify the network.I also have this problem when I try connecting my Xbox and he has the same issues with his ps3.Yet we can both connect wirelessly with no problems.The router in question is a Netgear N300+.
View 14 Replies View RelatedComputer Won't Connect To Internet Via TP Link Power Line
Feb 1, 2013I have got a TP link wireless router connected by TP link power line ethernet adapters connected to my sky box, one to Samsung Smart TV, which both work fine the third I have connected to my computer. This shows up as as a local area connection but with no internet access. I have similar problems to other people with internet access dropping out after installing Windows * and had hoped an ethernet connection would be more stable. Any thoughts on why I can't connect to the internet via my powerline adapter.
View 5 Replies View RelatedCisco VPN :: NSA2400 - Unable To Connect To VPN Using Secondary ISP Line?
Sep 20, 2012We are using Cisco VPN Client 5.0.07.0290 to connect to our servers. We have Sonicwall NSA2400 FW and we have 2 ISPs. We have configured the Load balancing on Firewall in 'Spill-Over' mode.
So whenever the 1st ISP Line is on full load it will automatically moves the users on 2nd line.The problem we are facing here is users who are getting IP from 1st ISP Line they are smoothly able to connect to Cisco VPN client but the users who are getting IP from 2nd ISP Line they are not able to connect to Cisco VPN Client. This is really annoying as everyone should be able to connect.
Cannot Access Personal Website
Jul 10, 2012I can't seem to be able to access my personal website from any of my home devices: computer,2xlatop,android phone all give me the same message: "Cannot connect to thebianchifam.mercury-gaming.com" I've been trying to connect with Google Chrome, IE and Firefox yet none of them work on either of the devices. I've asked other people to connect to the website and everyone says it's working just fine. I even used teamviewer on another computer in America and saw myself that it was working just fine. Also using the website : url... lets me connect just fine to website but It's rather annoying having to use a proxy server to do all the intensive forum work. I've been reading around all the forums and have found people with the same problem but none of them actually posted back saying how they fixed it. I was literally editing a blog page when I clicked on update and the website didn't let me connect anymore. I've tried flushing the DNS through CMD line with the "ipconfig /flushdns" command but it has yet to do anything. I restarted the rooter in the hope it will work but no succees. url...
View 14 Replies View RelatedLinksys Wireless Router :: How To Connect EA6500 To Phone Line
Jan 25, 2013I just bought an ea6500 to replace my old Billion router and up to now all I've had to do is plug my phone line directly into the "phone line in" port on the back of the billion router. But I see there is no "phone line in" port on the ea6500, I don't use a modem and have used the billion router by itself for the past 6 years, is there a way to connect my phone line directly to the ea6500 somehow? My research so far indicates you can't do it via an 'Ethernet / phone line adaptor' as they are incompatable anyway.
The install guide seems to expect a Modem is being used but in my case it hasn't been and I would think a router should perform the basic functions of a modem anyway ?
My concern is that if I really need to purchase a modem then won't this potentially 'throttle' the capabilities of the ea6500 which is the reason I've bought it in the first place ?
If I do need to purchase a modem to get my ea6500 working then what specs should I be looking for ??
Setting Up Personal Cloud Server
Dec 20, 2012I am running a zyxel nsa-325 series Network Storage device with 6 TBs of HD space. This NAS has a Linux kernel and 512mg of DDRIII ram. It is also running a Polkast personal cloud application that enables access to all the files through a simple UI rather than having to use FTP server login credentials (which I have also set-up).My home office is set up with Frontier as the ISP and they provide a locked down router/modem that you are not "supposed" to replace. It is made by speedstream and does not allow editing of the dns server or anything else that would be considered needed.I have set it up as the primary router with an ip range of 192.168.0.1 with a subnet of 250.250.250.0..I have several devices (printers, PC's etc plugged into this device via lan.Wireless broadcast and access is disabled...
My primary router is a Sapido 5000 series Gigabit router.I have this router broadcasting a wirelessB/G/N siganl for mobile devices to connect to. The NAS that I opened the thread with is plugged into this router via lan (Cat7).The Ip range of this router is set at 192.168.1.1 with a subnet of 250.250.250.0.All devices on the sapido router have access to the internet, as well as the services of the first router (networked printers, and speedstream router login for admin if needed).I can access the Zyxel NAS (192.168.1.104) from the PCs (192.168.0.2) connected to the speedstream, as well as the mobile devices and laptops (192.168.1.110-150) connected to the sapido.I have installed polkast which is an application that runs in the background on the NAS. It allows web access to all of the files (work docs, multi-media, ebooks, iso files, batch files for utilities etc. from a cell phone, tablet, pc, laptop, any device I want. I should be able to access the files from the web and also on the local WLAN to allow file transfers from the NAS to the device in seconds..When I am on the WLAN I can copy/stream a video file that is approximately 1GB in seconds. However, When I am on 3g 4g or at another location I do not have access. Polkast has simply said that I have an incorrect network configuration. I have confirmed that allk the Polkast side settings are fine and their user support has also confirmed that everything is as it should be. So they insist that the problem lies with my 2 routers. Their suggestion was to go back to using 1 router (HeeHee). I can RDP into any computer on my network from anywhere in the world. So the configurations seem fine. I also have FTP access to the NAS so I believe the ports are all forwarded correctly.
