Servers :: DNS Mapping Does Not Work On Computers?
Jun 25, 2012
I've been trying to map a specific domain name (say a.net) to a local (static) IP of a computer on that specific network, running Apache and used as a server.I did this by setting the Static DNS mapping configuration on my Dynalink RTA-1025W management panel.That works flewlessly on my iPhone and iPad, but does not work at all on any computer - desktop or laptop, Mac or PC, WiFi or LAN (tried a few desktop PCs, an iMac, a PC notebook and a MacBook Pro). On all of them, the browser is uncapable of resolving the DNS mapping, showing an error such us "Server Not Found".The only way I could override that behavior is modifying the hosts file, and that is not a solution for me, as the network is used by guest machines (say, as a public WiFi in an hotel).Is there a better approach for that?
View 16 Replies
ADVERTISEMENT
Nov 12, 2012
I have the following configuration: An ASA5505 with Security bundle license sits at the perimeter with a single public IP address assigned to VLAN2 (outside) out of a /29 block. I have two servers with static IP addresses of 10.70.21.6 and 10.70.21.7 connected to the inside ports with default gateway of 10.70.21.1 (which is the IP address for the VLAN1 inside). I have already configured a default static route and NATing (PAT) so we have internet connection for the PCs. Now I need to configure the ASA to allow remote desktop connection to the servers (with static IP addresses above). Can I use a spare public IP address for each server and if so, whats the syntax? or is there another method? I have used this before but I had a Cisco 2811 router on the perimeter so the syntax was at then: ip nat inside source static 10.30.1.248 81.85.199.44
View 6 Replies
View Related
Mar 1, 2013
Using an rvs4000 with firmware v2.0.3.2 I am able to delete 'setup/lan/static ip mapping' entries, but I am unable to add any.After deleting an entry, hitting save (which reboots the router) and then trying to enter the same device with a different static ip address, the "add" button has no effect.
View 2 Replies
View Related
Jan 25, 2011
I have a 2008 domain with win7 computers and winxp clients, i am able to see the win7 clients but not the winxp nor the servers in the network neighbourhood, ping works fineI can browse through a system on the network, but unable to have a broad view of the computers
View 1 Replies
View Related
Aug 29, 2011
I work as a System Administrator for a small company. Can i share a CD drive to all the computers in my domain. Or does this require any additional software to do all this. Because i tried to do it normally by sharing that CD drive and by which it was also available in my network. But when i was trying to access that it says "The drive is not ready". We use Windows operating system in our network. I even tried to google this but i could not find any exact answer for this till now.
View 3 Replies
View Related
Oct 1, 2011
I have 2 servers 2008 & 20 computers win 7 i need to give for 10 MB Speed for some computers and the others computers 100 MB Speed How?
View 1 Replies
View Related
Mar 29, 2011
how to connect 2 personal computers with telephone line
View 1 Replies
View Related
Apr 23, 2011
i want to change my password in adsl beetel 220bx2
View 1 Replies
View Related
Jan 31, 2011
i have 2 ftp servers running on windows server 2008 r2 with IIS 7.0 FTP 1 on port 21 works seamlessly, however my second FTP i have port 2121 will when "accessed" via [URL] from inside the router everything will work fine, once attempted to use the ISP address outside or even inside the router everything goes sour. i do recieve a login prompt but the page times out after credentials are supplied, i have configured the firewall to allow 2121 inbound and 2120 outboud, for shits n giggles i allowed 2120 inbound, that didnt work so i deleted that entry after the fact. Ports are forwarded, and to my best knowelege the firewall is configured correctly.
View 1 Replies
View Related
Sep 4, 2011
time.windows.com keeps showing error code? Error Code says:( An error occurred getting the status of the last synchronization.) I have even but the info. in manually and the same code appears.
View 1 Replies
View Related
Oct 23, 2011
A couple of days ago I bought a new desktop PC (Here is the link if anybody wants info on the PC [URL] but anyway, I'll get to my problem. My wireless router is downstairs in the living room and my desktop PC is upstairs in the bedroom. Theoretically, My PC's wireless card should be able to reach the router perfectly, being as I have several other PC's in the house that I use from my bedroom and the connection is 'Very Good' to 'Excellent'. Although with this new computer the connection's strength is very weak and it's so slow using the internet or trying to download things. It's internet is almost unusable. I've tried swapping the wireless card, but to avail. The connection is still awful.
Or of a way to boost the signal of my wireless card?
View 2 Replies
View Related
Apr 7, 2011
I have set up a network consisting of an XP desktop , Windows Home Server Desktop & XP Netbook & router.The network works as it should when the netbook is connected to the router by ethernet. However, when I connect the netbook wirelessly it (the netbook) cannot view the other computers & an access error is returned when trying to access networked folders on the desktop & server. (the desktop can see the laptop though). Disabling the security software made no difference nor did resetting winsock. So the problem lies with connecting wirelessly.
View 12 Replies
View Related
Jan 19, 2011
I have two desktops connected to the internet through wired connections to a router. I also have one laptop that is wireless connected to the internet via the same router. (Also have another laptop running Vista, but not using it right now.) and all are part of the same work group with unique computer names.Desktop 1 can see that there is a work group, but cannot see the computers in the work group. Error message about permissions.
View 1 Replies
View Related
Aug 1, 2012
I have a mac 10.7.4 and an xbox 360 slim. Whenever I try to play online like cod or fifa and someone else is on the computer It is super lagy, Laging. Before when I had a **bleep**y netgear 33 mb it worked perfectly fine. Now this router is has 300 +mb and it stil doesnt work. This router cost me $80 dollars. Before cisco linsys I bought a netgear not the **bleep**ty neatgear but a newer one and it still had the same problem.
View 1 Replies
View Related
Aug 7, 2011
i have port forward minecraft on a netgear WGR14v9 on the router manager but when i run the mincraft server it says i havent and online port checkers aswell
View 2 Replies
View Related
Feb 24, 2013
Region : Mexico
Model : TD-W8968
Hardware Version : V1
Firmware Version : the last version of this web page, i forgot number
ISP : TELMEX (infinitum)
i have some problems to configure the port forwarding in my router, don't it work ! but the port number 80 it works with my sub-domain in the internet. after i change this port to 8080 still dont work the port forwarding. the FTP server its ok.
[code]......
View 3 Replies
View Related
Jun 11, 2013
We are planning to split the Private servers from the DMZ Servers and configure an additional Interface and segment for this purpose.
Private Servers Segment: 192.168.4.0/24 (there is no DHCP all servers' IPs are statically configured)
DMZ Segment: 192.168.3.0/24 (This is a future deployment)
LAN Segment: 172.17.0.0/16
Both, Private Servers and DMZ Servers are in a collocation as well as the ASA5520. There are multiple Branch offices that uses subnets within the 172.17.0.0/16 Network and they are connected to the ASA5520 via Metro-E.
I do not know if this is possible but what I want to do is this:
In order to avoid the change of internal DNS records I want to mask the DMZ servers with a Private Server IP when a Private server or LAN host wants to access it like this:
The FTP server in the DMZ has the IP address: 192.168.3.100. But when a PC from the LAN wants to reach the FTP server it should points to its old IP: 192.168.4.100. This way the PC sends a packet to the ftp.corporate.net (192.168.4.100) the ASA recieves the packet and translate it to the (192.168.3.100) and send it out through the DMZ Interface.
Also if the Private Servers wants to reach the same FTP the ASA will act like a proxy-ARP and send the paquet to the DMZ by means of the translation of the IP.
View 6 Replies
View Related
Apr 16, 2011
i'm trying to connect 5 servers together to create a private network.Each server has a network of it's own and i'm trying to make all 5 servers communicate with each other to share and search data simultaneously..
View 16 Replies
View Related
Mar 20, 2012
I Have exented vlan 120,121 from DC-1 to DC-2,the DC-1 and DC-2 are connected using L2 Trunk over fiber terminated on Cisco 6513 on both site ,the distance around 40 Km ,on the DC-2 i just assigned server-1 TO VLAN 120 while server-2 in vlan 121 ,but these servers unable to communicate neither with DC-1 Servers or betwen them locally on DC-2 ,pls note that the servers at dc-2 rely on DC-1 for routing.
View 7 Replies
View Related
Apr 5, 2012
Is it possible to Map a Network Drive over a VPN?Users in my company connect to a remote site using VPN (PPTP) and i am wondering, can i map a drive to the PC i am on from the remote network while connected to VPN?
View 10 Replies
View Related
Dec 13, 2012
if it is possible to map a network drive by IP address.
View 1 Replies
View Related
Jul 25, 2012
we have ACS 5.3 and 1042 AP. So we need to authenticate client based on user certificate, and after that to put the client in specific VLAN based on membership in Active Directory group.
Is it possible to do that? We can not solve the problem of identity store, once the user is authenticated based on regular certificate, we need to authorize the same user based on the specific attribute from AD.
View 1 Replies
View Related
Jun 22, 2011
Cisco 891 does Static IP mapping and where I can get instructions how to use Static IP Mapping?Is the Static IP Mapping done throught CLI or through the CCP?
View 5 Replies
View Related
Apr 7, 2011
We have ACS 4.2 and has been integrated with AD. Now, a new user group has been added in AD but we are not able to see that new AD group in ACS to do the mapping. We have refreshed the sgent in ACS and also have restarted the ACS agent in AD. But still we rae not able to fetch the new AD group in ACS in group mapping.any way to fetch the new group in ACS from AD.
View 1 Replies
View Related
Jan 17, 2011
I have several computers on a network hooked to a server. All of these computers are running XP and have are mapped to a drive on my server. The problem is, once in a while the mapped drive will suddenly not be there. I can manually remap them and sometimes I have to remap 2 or 3 times before it keeps.
View 5 Replies
View Related
Jul 7, 2012
I have never had to share an Ubuntu drive to windows before, and I never thought it would end up being this difficult. What I need to do is share my 500gb drive in ubuntu, it is a secondary drive, not the primary with the OS on it, to my windows xp and my windows 7 machines. So far I have samba installed on the ubuntu machine and I have formatted and set everything up. The issue is that I just cant figure out how to connect to it in windows becuase when i use the map network drive feature it says something about no network found.
View 1 Replies
View Related
Aug 13, 2011
I have w7 and the D-Link DIR-655 router.I just replaced the same router that crapped out on me.I'm online with no issues but for some reason, I can't map some of my computers to one another. At first, it seemed like it was going well on a couple of them. Others ask for the windows password.I'm not sure, but I think it's the Homegroup password?I remember one of the the homegroup passwords and all computers are joined, but the only password I recall/know isn't working on any computers.
Questions: Can't I map network drives through the router functionality and do away with the homegroups altogether? I'd really like to do that. I'm not really impressed with homegroups.
if the answer is no, how the heck to I figure out or get new passwords? This wasn't an issue in the past. Not sure if somehow, I changed a setting?While searching around, I found the "manage credentials" area. Never noticed before.
View 19 Replies
View Related
Aug 24, 2012
I am running XP Professional 32 bit SP3 on a Dell workstation.I am in a serviced office with internet connection via single ethernet port. This is set up as a VLAN for which I have 4 assigned IP addresses.I am using a Netgear GS605v4 switch to create a small network on my side of the port. Hooked to this is the workstation, the mybook live, and a laptop.All 3 connected components are assigned their IP addresses by DHCP. Both the workstation and the laptop can see the internet without difficulty. The networking of the components is another matter. Focusing on the workstation for the moment:On the workstation, I can ping the mybook. I have always been able to see its upnp logo in My Network Places, and double clicking always takes me to the web browser based dashboard where I can set up the device. I was initially able to see the public folder in My Network Places too, and could map a drive to this in an Explorer window. Typically after some time, the mapping would be lost (even without re-booting the machine), but I would be able to delete the connection and re-map it. After several attempts at this I could no longer map the drive or see the public folder in My Network Places anymore. After much internet searching and playing with lots of the suggested fixes (checking all required services available, matching user names between XP and the drive, playing with 'net view' etc) I was finally able to see and map the public folder yesterday by playing with the 'enable netbios' function in network connections (currently set to 'enable' from 'default' though this had not made any difference previously). I could see the drive in 'net view' though no master browser was listed, and once again map to the public folder, and access files on it.On turning on the workstation this morning I find that the mapping has again been lost. This time net view is back to reporting a system 53 error. I can ping the drive and use the dashboard, and I can see the public folder in My Network Places, but clicking it or mapping to it results in the usual 'network path not found' errors. The laptop is running Windows 7 and has not lost its mapping overnight, and can still access the public files.
View 2 Replies
View Related
Aug 8, 2011
At work we have a private network set up so that any computer that is plugged into the wall is on the same network. (i.e. all ip addresses are identical except for the last block of numbers)All machines are running WinXP.We have one computer set up as a file server (computer with shared folders) that is plugged into a wall socket. We have 3 other machines that can see and access the shared folder on the server computer once they are plugged into a wall socket. The odd thing is that these 3 machines have different settings as far as I can tell. They are all on different workgroups but they have no problem finding the shared folder.However, when I go to plug my laptop into a wall socket, I am not able to map a network drive. The error msg says it cannot find the drive. I have my laptop set-up on the same workgroup as the server computer and the server computer can see my laptop. But when I double click on my laptop in the server computer workgroup I get a msg saying permission is denied.
My laptop can connect to the internet, but cannot find the shared drive. I have tried turning off my laptop firewall, the server firewall, both firewalls etc with no success. In my Local Area Connections I have the following all enabled "Client for Microsoft Networks", "File and Printer Sharing for Microsoft Networks", "QoS Packet Scheduler", "Internet Protocol (TCP/IP)".
View 5 Replies
View Related
Apr 30, 2012
I am configuring a new ACS 5.3 system. Part of the rules is that I want to match the users specific AD group membership, and match appropriatly to an identity group.What i'm trying to do is say that if the user is a member of the AD Group (G-CRP-SEC-ENG) then associate them with the Identity Group SEC-ENG. The under the access service, authorization portion, i assign shell profiles and command sets based on Identity Group.It seems that the ACS server will not match the AD Group for the user, and it will match the Default of teh Group Mapping portion of the policy every time.
I tried several configuration choices from : AD1:ExternalGroups contains any <string showing in AD>, AD1:memberOf <group>.Is there something special i need to do in the Group Mapping Policy to get it to match and active directory group and result in assigning the host to an Identity Group?
View 7 Replies
View Related
Jun 6, 2011
how do you enabled multiple port mapping on asa 5505? i want to use 1 static ip address for rdp connection for 15 users, and the port will start from 3390 to 3340.
View 4 Replies
View Related
Jul 16, 2012
I have a medium enviroment with 2 x Cat4500 switches and 50 x Cat3650 plus few Cat3750 switches. I'm looking for a network mapping tool to map all the network equipment so I can easy to manage or trouble shoot the network. It doesn't matter if it's free or paid but something I can try first before buy.
View 1 Replies
View Related
Aug 12, 2012
We have a 5508WLC recently updated to 7.2.110.0 since we are using CAP3602I-N-K9, this AP is intended to work as a H-REAP device and eventhough it is registering to the controller I can't get to see the WLANS on the list to map it to the local VLANS
I have verified and the WLAN is configured for local switching also have followed the steps listed here:URL
Still Can't see the WLANs under the Flexconnect tab on the AP?
View 2 Replies
View Related
