Linksys Wireless Router :: E4200 TCP UDP Timeout Configuration?

Dec 2, 2012

There is anyway to change the timeout on the tcp/udp connection? So the router close the connection automatically.

View 1 Replies


ADVERTISEMENT

Linksys Wireless Router :: Granulated Firewall Configuration On E4200

Apr 17, 2012

I am trying to configure the firewall of a linksys 4200. I would like to be able to close or open every single  port on protocols/incoming/outgoing. There doesn't seem to be a straightforward way in the e4200 web interface, is there any other way to perform this? Google doesn't seem to provide me many alternatives. 

View 2 Replies View Related

Linksys Wireless Router :: How To Tell If E4200 Running At Optimal Configuration

Jan 11, 2012

Just picked up the E4200 and used Cisco Connect to install.  Wanted to know a few things?
 
-Windows 7, 64 bit
-E4200 router
-AE2500 adapter
 
1)  How can I tell if its running at optimal configuration?
 
2)  Before with my previous router (netgear) I didn't see my router in Device Manager.  Now its under Network Infrastructure Devices.  It lists the name of my router, under that it lists Microsoft Wireless Router Module??
 
3)  Before with my previous adapter (belkin) I would see my Network Adapter in Device Manager.  I see my network adapter listed, under that Realtek PCI (LAN), but now there is another new device?  Microsoft Virtual WiFi Miniadapter?? 
 
Why are these Microsoft devices showing in Device Manager?  Did they not get installed correctly?

View 2 Replies View Related

Linksys Wireless Router :: E4200 USB Disk And Access Configuration

Jan 2, 2012

I got my NTFS formatted drive to work with the E4200 router via its USB port.I do not see any 'Access' option to configure different access types based on users.  I do have users configured in the Administration tab; these are what came per-configured on the router.

View 4 Replies View Related

Linksys Wireless Router :: E4200 / Cannot Access The Twonky Configuration Pages

Dec 27, 2011

By now, I'm sure E4200 and other Router users that have twonky have noticed they cannot access the twonky configuration pages, as you have chosen to block them.  Please give advanced users a work around to this, because if Twonky does not recognize our newer TV/devices, then we cannot play certain file formats without manually configuring the service.

View 3 Replies View Related

Linksys Wireless Router :: E4200 Storage Configuration Shared Folders

Mar 27, 2013

My E4200 storage config (portions of it) does not persist through reboot cycles. We often have to reboot the router because we lose wireless conectivity, and each time we reboot, we lose our mapped drives because the router is no longer sharing the folders and permissions I set up. And in the storage settings, my shared folder setup looks like factory default (sharing only root /) after each reboot. Those settings do not persist. I have to restore my router config from a backup after each reboot, which is a real pain. Especially when the kids reboot the router to get their wireless back, but restore is just too complicated for them, and so they call me when they then can not access their network share folders with homework on them.

View 9 Replies View Related

Linksys Wireless Router :: E4200 - Access Restricted To Media Server Configuration

May 30, 2012

When I'm trying to access the Twonky setting page on http://192.168.1.1:9000/config I get: Access is restricted to MediaServer configuration! Is this normal or not?

View 2 Replies View Related

Linksys Wireless Router :: Configuration Interface For Built-in Twonky Server On E4200?

Jul 6, 2011

how to get at the configuration interface for the "built-in" Twonky server on the E4200.Specifically, I'm trying to figure out how to get to the "clients.db" file and the area of the UI where I can configure the receiver settings. I'm getting the dreaded "unknown file format" message when streaming mp4 files to my Samsung BD-C6500 bluray player.  Installing Twonky on my laptop and working with the problematic files has shown that the solution is a simple matter for BD-C6500 understand how the files are encoded.

View 9 Replies View Related

Linksys Wireless Router :: E4200 - Access Is Restricted To Media Server Configuration

Oct 23, 2011

I use to run Twonky media server on my iMac and I was very happy with it. Now I have purchased a Linksys Wifi Router E4200. Twonky server embedded works fine with all my devices except with my Samsung D8000 Led TV. In the Mac version I must identify manually the player (Samsung TV), if not mkv won't play. The question is: How can I select the device in the Linksys E4200? The config page is not available and displays "Access is restricted to mediaserver configuration" E4200 firm V. 1.0.03

View 9 Replies View Related

Linksys Wireless Router :: E4200 Local Area Connection Doesn't Have A Valid IP Configuration

Feb 14, 2012

I am setting up a new E4200 modem, and have not been able to use the wired connection. The Windows 7 diagnositic on all three computers tells me "Local Area Connection, doesn't have a valid IP configuration."Model: E4200v1..I am using a new E4200 router, along with a new SE1500 5-port switch and a new SE2800 8-port switch.I am using a wired network that consists of two desktop computers, a laptop computer, a network printer, three Direct TV recorders, two Roku streaming video players, a BluRay player, and an XBox gaming console.Here is what I have done so far.

1- I can bypass the router to establish a direct wired connection to the cable modem. This works to access the internet. It establishes a new wired connection called Network 2.
2- I can access the internet using the wireless connection to the router. It shows a valid IPv4 address.
3- With all cables in place, all the lights are flashing on the router and on the computers.
4- I had changed cables and swapped cable ends.
5- Using the wireless connection, I can access the router home page (192.168.1.1). It shows valid IP addresses.

The problem is that my old Linksys BEFSR81 stopped working, with the same eror message for the LAN connection, "Local Area Connection, doesn't have a valid IP configuration."How often does the WAN port go bad? On both a five-year old BEFSR81, and a brand new E4200?

View 7 Replies View Related

Linksys Wireless Router :: How To Change TCP Timeout On WRT54GS

Jun 8, 2011

How do I change the tcp timeout on a WRT54GS router v2 ?

View 4 Replies View Related

Linksys Wireless Router :: EA2700 - Can't Ping Modem / Get Timeout

Apr 19, 2012

I have an Cisco EA2700 router and a Motorola SB6121 modem. If I'm connected to the router wirelessly or through any of the lan ports, I can't visit the modem's diagnostics page at 192.168.100.1. If I connect directly to the modem, it works fine. Also I cannot ping the modem through the router, just get a timeout. My ISP is Comcast.

View 9 Replies View Related

Linksys Wireless Router :: Cisco EA4500 How To Increase NAT Timeout

Oct 29, 2012

I purchased and installed a new EA4500 wireless router.  At the same time i had a new Voip phone system installed as well which i'm having issues with.  The main issue is that my phones communicate with the service every 240 seconds....the issue is that my NAT timeout is below that 240 threshold.  Thus my phones go in and out constantly. increasing the NAT Timeout.

View 5 Replies View Related

Linksys Wireless Router :: E4200v2 5ghz Network / Connection Timeout

Feb 29, 2012

I was able to connect to my 5ghz and 2.4ghz networks just fine. Now today I get a message that the connection timed out whenever I try and connect to the 5ghz. I have done a 30/30/30 reset, and still no joy. The one thing I haven't done yet is a 30/30/30 with a configuration from scratch. I will probably try that later. I've done the usual things like change the channel and all that, still no go. Other things I've done, change the network name, change the MTU, restart my machine. However, this is happening on other devices as well. The 2.4ghz network, solid as a rock.

View 1 Replies View Related

Cisco Firewall :: ASA 8.4(3) Timeout Configuration

Oct 3, 2012

I would like to know something with more accuration about idle timeout configuration. In particular why is impossible to set "half-closed connections"  to a value lower than 5 minutes neither through a policy-map? In my  particular scenario, my asa is used to nat mobile phones traffic, it  should be advisable to use less than 5 minutes
 
In my configuration I've set the timers as follows:
 
.
timeout xlate 0:15:00
timeout pat-xlate 0:00:30
timeout conn 0:14:00 half-closed 0:05:00 udp 0:02:00 icmp 0:00:02

[Code].....

View 4 Replies View Related

Cisco Firewall :: ASA5505 DMZ Configuration Versus Linksys E4200 DMZ

May 11, 2013

I am using a Cisco E4200 router today but I am moving to a ASA5505.   I have a device that sets up a VPN tunnel that I want to put in my DMZ.   It's called the ATT Gateway.  I have attached the diagram.   When I use a Cisco E4200 all I do is put the outside private ip address of 192.168.0.99 of the ATT Gateway into the DMZ of the E4200 and the VPN tunnel of the ATT Gateway comes right up. I cannot configure the DMZ to do the same with the ASA.   I also need to have the laptop behind the gateway access the printers in the inside network. 

View 15 Replies View Related

Periodic Ping Timeout With Linksys WRT54G Router?

Mar 20, 2011

I am running a Linksys WRT54G wireless router but have my primary computer hard wired to it while my laptop connects wirelessly. In both cases, when I ping my IP's speed test site, I get a solid ping rate of approximately 17-20ms but i also get about 5% failed: timeout's. Now I've seen posts here that suggest wireless interference could be an issue but since my desktop is hardwired into the router, that source would seem to have been eliminated. When I connect my desktop direct to the cable modem the problem doesn't occur.

View 2 Replies View Related

Linksys Wired Router :: RV042 / RV082 Timeout Bug Found

Jan 23, 2008

telnet/ssh sessions time out after 30 minutes of in-activity This only happens in the case of a server that is setup behind the firewall, and of course port forwarding is used. If one unchecks the radio button for the enable firewall the sessions do not timeout at all. This is very reproducable in all recent (1.3.9) versions of RV042 and RV082 routers.

View 2 Replies View Related

Cisco Firewall :: ASA 8.2(5) - Uauth Absolute Timeout Disabled And Inactivity Timeout Set To 48 Hour

Nov 26, 2012

ASA 8.2(5), uauth absolute timeout is disabled and inactivity timeout is set to 48 hours:
 
timeout xlate 48:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:00:00 absolute uauth 48:00:00 inactivity
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
 
Users still get kicked out every 8 hours and they have to reauth. This is a logging message:
 
%ASA-5-109012: Authen Session End: user 'john', sid 839, elapsed 28801 seconds

View 1 Replies View Related

Linksys Wireless Router :: Can't Log Into E4200

Apr 4, 2012

I have a recurring issue with my e4200v1. My wired and wireless connections work fine, but I can't get to the administration website. I have https only set up, and after I get thru the 'certificate error' screen, I get an error that says web page is unavailable. Firfefox tells me that the connection was lost - error 101.I have tried wired and wireless, multiple computers, multiple browsers.   I even turned the firewall off on one computer (or I think I did anyway).The only way I know how to fix it is by completely resetting then setting up the router all over again.

View 2 Replies View Related

Linksys Wireless Router :: E4200 Wan Not Available

Jul 27, 2011

Upgraded from WRT610N to E4200. Since upgrading to latest firmware the wan just disappears both 5 and 2.5 Ghz bands. Happened with older firmware but not as often. Using it in briged mode. When this happens I can't even get to the management page with a lan connected pc. Have to do a hard reboot to get it to respond again. This is unacceptable for a router at this price point.

View 2 Replies View Related

Linksys Wireless Router :: How To Setup E4200 As WAP Only

Jan 5, 2013

I am connecting the E4200 to a Sonicwall TZ100. I want the TZ100 to assign IP addresses to devices that connect to the LAN via the E4200.
 
How do I have the E4200 act as a WAP only or not assign IP addresses and push that responsibility to the TZ100?
 
I'd still want the E4200 to have a SID key for LAN access security.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Not Getting IP Address?

Dec 21, 2011

I have a 6 month old Cisco e-4200 router that is updated to the latest firmware, connected to a Motorola surfboard modem on Sudden-link in Midland, TX.
 
I previously used this exact same setup on Cox Cable in Wichita, KS with no problems. Upon setting it up down here I cannot get the router to pickup an IP address. I have Power-cycled everything multiple times, did a complete reset and re-installation of the router software and still no luck. The Sudden-link techs have no idea what is wrong. They said that the modems signal is strong and everything should be working.
 
Actually I did get it to work once for a couple of days, however when redoing the surround sound system I had to unhook the cable line and it quit working and I haven't gotten it to work again since. I have tried unhooking everything. Turning it all off. Waiting for 5+minutes, and then reconnecting in order: First the modem, then an ethernet cable to the computer which will usually work. But as soon as I unplug the cable from the computer and plug it into the router it stops working.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Does Not Have Any Provision To Use MAC ID?

May 13, 2013

I bought Linksys E4200, at a time that is the TOP of the line Cisco routers for Home use.I noticed a serious usage issue with it, I could not identify which are the wifi devices connected to choose for access restriction or parental controls, as the dialog box state only as "Network device", and software control by Linksys does not have any provision to use MAC ID or any other option "except " looking at the dialog box as "Network device".

View 4 Replies View Related

Linksys Wireless Router :: Connect E4200 To A Mac Via Afp?

Mar 14, 2011

How to connect the e4200 to a mac via afp? Trying to mount the network drive so the mac see it and can use for time machine backup.  

View 3 Replies View Related

Linksys Wireless Router :: Can't Update E4200 V2

Jan 3, 2013

Trying to update it to the new smart Wifi  but getting this error "Incorrect Image File".Yes Ive tried redownloading yes ive tried different browers and yes to unziping the file! and Yes Im downloading the correct version I even tried version 1 for the heck of it and still nothing. 

View 3 Replies View Related

Linksys Wireless Router :: E4200 V1 Tops Off At 144+450 Not 300+450

Dec 21, 2011

I just received by replacement e4200 v1. I updated the firmware to 1.0.03 build 14 and am up and running just fine. The specs say e4200 should be 300+450Mbps. I am using a software "inSSider 2.0" to view my wireless setup. I get 144(N) at 2.4GHz and 450(N) at 5.2GHz. Please  note these are max bit rates and not connect speed or throughput rate. The "inSSider" software gives me the following:

2.4GHz - 1/2/5.5/6/7/9/11/12/14/18/22/124/28/29/36/43/44/48/54/58/65/72/86/116/130/144

5.2GHz - 6/9/12/15/18/24/30/36/45/48/54/60/90/120/135/150/180/240/270/300/360/405/450

I get this information by hovering on the max bit rate field on the row displaying my SSID. So is it correct to say that my e4200 is not designed to reach 300Mbps at 2.4GHz. There is an earlier discussion thread about connection maxing out 144. Please note I am not talking about connect speed or thru-put speed. Max design bit rates of dual band router labeled e4200.

View 9 Replies View Related

Linksys Wireless Router :: E4200 And Powerline Not Getting Along?

Jul 10, 2011

Just got a e4200. However I also have a cisco av power line adapter which worked fine. However when connecting to the 4200 it doesn't recognize the Internet. Have rebooted, reset switched ports etc. But it still doesn't work. It sees the network but not the Internet. Have tried everything ikon but no luck. Cannot connect my directive to the Internet. If I can't get it to work will have to run a 50 foot cable.

View 5 Replies View Related

Linksys Wireless Router :: Turn Off ULA On E4200 1.0.03?

Oct 8, 2011

Firmware 1.0.00 on my E4200 Hardware v1.0 provided a functioning 6to4 tunnel through Comcast's 6to4 facility. Windows and Linux clients on my local network discovered IPv6 addresses and were able to use them successfully.Unfortunately, after the upgrade to 1.0.03 this functionality was gone. I missed reading the ChangeLog, which said that the automatic tunneling feature was removed in 1.0.01. The now provided IPv6 functionality works much less well. First, automatic configuration (discovery of the 6to4 via IPv4 anycast) no longer works with Comcast's gateway. If I configure the tunnel manually, by specifying a 2002/16 prefix, I regain IPv6 connectivity, but only for Linux clients on my local network.
 
Windows 7 clients suffer from the problem that because the E4200 hands out ULA addresses, they end up preferring those ULA addresses when making global IPv6 connections in the IP 'source' field, which of course does not work. It's like putting your company mailbox code as the return address on a letter you send via US Mail. Other home routers, such as the AVM Fritz! (url,...) suffer from the same problem. However, they provide an option to turn off ULA at the router.Is it possible to turn off ULA for the E4200?

View 2 Replies View Related

Linksys Wireless Router :: E4200 Can't Log-Out Settings 192.168.1.1

Mar 26, 2012

I have a E4200 router v.01 and when i updated the latest firmware (due to security exploit) it seems that whenever i acess the router settings (192.168.1.1) it doesn't ask me nor to input the admin and the password anymore, using wifi or wired.. I want the usual proccess whenever i go to 192.168.1.1 it will ask me to input my admin and password to change my router settings..

View 4 Replies View Related

Linksys Wireless Router :: Use Cisco VPN Through E4200?

Jul 16, 2012

I have an E4200 and the Cisco VPN client on my home computer that I use to access a work network.  The VPN client cannot connect unless I either (a) bypass the E4200 and connect directly to my cable modem or (b) disable the SPI Firewalls on the router.  I have all the VPN passthroughs set to "enable" on the router, but still cannot connect.  The VPN client is using IPSEC over TCP on port 10000.

View 5 Replies View Related

Linksys Wireless Router :: E4200 Cannot Access FTP

Nov 15, 2012

I've been trying to get FTP Running up on my router for some time now.
 
I know my current WAN address and have setup a specified folder on my E4200 for the FTP partition. A username for myself has been created with login info and I have forwarded the port I have specified on my router's FTP configuration page.
 
I try to log into the server, but whenever I try to log into it, I keep getting a "incorrect login information" message back at me.
 
If I cancel out of that then I get an error message saying it can't find the specified folder and to check the address of the server.
 
I know the login information information is correct and I've tried changing the password to others of varying lengths.
 
I've also tried changing the port I'm running the FTP off of incase my ISP has blocked that port, nothing works.

View 9 Replies View Related

Linksys Wireless Router :: E3200 Or E4200 - Which One Is Better

Jul 6, 2011

I have a 6 year old wrt54g that is working fine but old. I want to upgrade and will go with the 3200 or 4200.  I really don't need the extra features on the 4200 since everything I have is hardwired (directly to two laptops and to two switches in other parts of the house for tv and printer).  I want wireless for times when we move a laptop but it wouldn't be all the time, and we won't (for now) use the media options. The difference in price between the 3200 and 4200 is less than $25 so costs is NOT a factor in deciding.So should I just purchase the 4200 since price is not a factor or go with 3200; I want the most stable of the two and will never need the extra wireless features in the 4200. 

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved