Linksys Wireless Router :: Replace WAG54GS Gateway With EA6500?

Jan 4, 2013

I am looking to replace my current WAG54GS Gateway with the EA6500. Problem is the new one does not have a built in ADSL2+ modem (I am in the UK and my ISP is Demon Internet). I therefore need to purchase a separate Modem to connect to the router.

View 9 Replies


ADVERTISEMENT

Linksys Gateway WAG54GS Router Does Not Work Wirelessly

Apr 21, 2011

I am having problems with my linksys wireless G ADSL gateway WAG54GS router. I am on Windows Vista/Internet Explorer. When I set up the router to work on the internet when I first bought it (several years ago), something must have gone wrong in the installation because it works only when connected to the computer by the lead, and NOT wirelessly.

While this is fine for general internet browsing etc on the main computer, my problem now is that I cannot connect anything else to it (such as my Playstation 3) because the router does not work wirelessly and I do not have the WPA key that the PS3 asks for. Is there any way can fix this without doing a complete reset on the router?

[ALSO: the router also periodically goes wrong, e.g. loses connection for no reason at all - I often have to disable and then enable the internet connection, or turn the router off for 15 seconds then switch it on again, and then it's fine again. I live in a rural area though, so it might be because of a poor connection. Our telephone connecton isn't very good either and sometimes goes wrong.]

View 4 Replies View Related

Linksys Wireless Router :: WAG54GS-E1 - How To Turn Off SIP ALG

Jun 17, 2011

How do I turn off the SIP ALG?

View 1 Replies View Related

Linksys WAG54gs - Create A Wireless Bridge?

Feb 20, 2013

I am wondering if it is possible to Create a wireless bridge. I am trying to connect a linksys WAG54gs to next doors wireless router. It's ok she's my mother in law.
She has a BT home hub 3.

View 1 Replies View Related

Linksys Cable / DSL :: Does WAG54GS Support WDS Wireless Bridge

Feb 13, 2011

The subject syas it all really, I've spent all evening trying to get this to work, firmware is now on 1.01.05 and still no luck. Maybe it just doesn't support it?

View 1 Replies View Related

Linksys WAG54GS No Wireless Connectivity After Secure Easy Setup

Apr 24, 2012

We have a linksys WAG54GS router the secure easy setup button of which was pressed instead of the on off switch when a reset was required. Now we can only browse the internet via a cable from the pc lan port to the router ethernet port. Things done :- Secure easy setup button held down for 10 seconds. Router went to an unsecured one now back to secure.

View 3 Replies View Related

Linksys Cable / DSL :: WAG54GS Need Wireless Signal To Reach Each Guest Room

Jun 1, 2009

i'm setting up a wireless network for a local B&B they currently have a Linksys WAG54GS ADSL router in one of the rooms but need the wireless signal to reach each guest room the house has thick brick walls and an upstairs.i was thinking of using 2 x repeaters, the WRE54G's, and to put one on the ground floor within range of the current ADSL router and to put another on the 1st floor within range of the repeater on the ground floor to receive the bounced signal.I don't know much about these repeaters and how they work exactly and so unsure if this would be a viable solution in my case.

View 6 Replies View Related

Linksys Wireless Router :: To Replace Dying Netgear FWAG114

Sep 6, 2011

I need to replace a dying Netgear FWAG114 wireless router, and the E4200 gets good reviews so I've been looking into it. I'm a software developer running 6 servers plus 3 laptops and 5+ other devices (iPad, Wii, Droid phones, BluRay...). I prefer to use  a trusted PC list (enter MACs for all trusted devices) rather than WEP or WPA - is this available with the E4200?
 
I don't need VPN, but I do run a number of web servers, app servers and databases, so port forwarding is important - I notice the E4200 provides port range forwarding and single port forwarding - I assume this replaces the Rules and Services feature in Netgear - right?
 
Do you see any potential problems, given my needs, in using the E4200?

View 2 Replies View Related

Linksys Wireless Router :: E1500 What Is Best Notebook Card To Replace Broadcom

Jul 13, 2012

I own an HP Pavilion dv6 Notebook PC and recently purchased a Cisco E1500 to replace my aging WRTG54 wireless router. Since installation of the new router I keep getting dropped from my LAN and the internet with "connectivity issues" ... this only occurs on my notebook PC and not the other wireless devices I have in my home. I’ve done some searching on the internet and this seems to be a generic problem with the Broadcom 802.11b/g/n card the notebook uses. I have 2 questions:

1) Is there an easy way to adjust either the card or the router to deal with these issues and if not then

2) what is the best notebook card to replace the Broadcom with to assure these issues go away.

View 9 Replies View Related

Linksys Wireless Router :: WRT54G Replace XP Machine With Wired Desktop Running Windows 7

Apr 28, 2010

I have a Linksys WRT54G router; have a cable internet connection through the router; and two wired desktops, one running Vista (32-bit) and the other XP. I would like to replace the XP machine with a wired desktop running Windows 7 (64-bit).

View 8 Replies View Related

Linksys Wireless Router :: Setting Up QOS On EA6500?

Dec 23, 2012

I would like to know how to setup QOS on the linksys EA6500 wireless router. I know about the media prioritization settings, however, thats not enough for me. I would like to setup upload and download speed limits for certain devices on my network, like, say 300kbps download for a certain device at all times.

View 3 Replies View Related

Linksys Wireless Router :: EA6500 Downgrade To 1.1.27?

Dec 13, 2012

provide me with the latest (or one) release of 1.1.27 firmware for the EA6500. I am deeply disappointed in the last firmware upgrade and due to security and sudden lack of certain, or let's say all, functionality in bridge mode I need to downgrade or wait for an upgrade where that's fixed, but most likely not soon, or ever. Where could I find the firmware downgrade.

View 2 Replies View Related

Linksys Wireless Router :: EA6500 Not Support WOL?

Dec 14, 2012

I use EA6500 I Don't find WOL OTL..

View 1 Replies View Related

Linksys Wireless Router :: Use Two EA6500 In Same Network?

Nov 3, 2012

I was wondering if it's possible to use two EA6500 in the same network, one as main router and the other as anacess point?

View 2 Replies View Related

Linksys Wireless Router :: DSL Modem To Go With EA6500?

Jan 29, 2013

I have an EA6500 which obviously has 4 Gigabit ethernet ports for my home network, but I need a DSL modem to get it working.What's the maximum speed current modems can supply from the Internet to my router, is there such a thing as a Gigabit capable DSL modem these days or am I dreaming ? Is it possible to even get Gigabit dowload speeds via DSL or would I have to go cable to achieve something like that ?My main concern is I don't want to buy a modem that will slow down or 'throttle' the capabilities of the new router I've just purchased or have I got the wrong idea ?

View 7 Replies View Related

Linksys Wireless Router :: Don't See Anything About VPN Pass Through On EA6500

Dec 30, 2012

Looking to upgrade my old G router to the EA6500.  I don't see anything about VPN pass through on the EA6500 or any linksys N router.  Is this feature something they no longer include?

View 3 Replies View Related

Linksys Wireless Router :: EA6500 Without Routing / Using WAN?

Dec 29, 2012

I would like to use the EA6500 in my network - but nor as primary router (or in fact routing at all). I would have thought, one could simply tell the device to use a particular gateway, but it does not seem to be easy. I have used many other home routers as combined switch/AP/USB-drive (latest a D-Link DIR-655), but the EA6500 seems very picky. The "easy" "Smart Wi-Fi" setup requires internet access through the WAN port - and that divides my home network, which then have two zones which cannot really "talk" to each other. Alternatively, I can reset the device and access it directly on the IP (initially 192.168.1.1). But then I can change only LAN and WLAN settings. Stuff like Guest Access, USB-devices etc. won't work. Do anybody have success with this device without using the WAN port and the DHCP server?

View 8 Replies View Related

Linksys Wireless Router :: EA6500 - Way To Get FTP To Work?

Nov 13, 2012

I have a new EA6500 and am failing at getting ftp to work.  I have updated the firmware.My ftp folder is on a Seagate USB Go-Flex drive attached directly to the router via USB.  I have set up shares which I can see and access via my computer which is attached to the router.FTP is configured to use port 21 and UTF-8.

View 9 Replies View Related

Linksys Wireless Router :: EA6500 NAT Redirection Bug?

Nov 20, 2012

I have a pair EA4500s that I am swapping out for a pair of EA6500s.  One EA6500 is a router.  The 2nd EA6500 is set as a bridge and us being used as an Access Point about 200ft and two floors above the main EA6500 router.  The two units are connected via DECA (200MB Ethernet over DirecTV cable - an alternative for others with a cable provider is called MOCA).  So, basically two EA6500s serving as two Access Points on opposite sides of the house and all wireless networks on different channels but all sharing the same SSID.  Everything works GREAT except for one unusual issue.
 
The issue is with wired or wireless clients.  If I try to use my PUBLIC address with port number to address a local client on the local network inside the NAT network the NAT redirection fails.  In other words if I use 172.16.16.8 for a local web cam while inside my network from an iPhone or PC all works great.  If I use the external public address, however, the connection times out.  If I pop out the EA6500 doing the routing/NAt and swap it with the old EA4500 with basically the same config as the EA6500 everything works again.  The EA6500 and the EA4500 are configured identical for the most part and with the EA4500 as the main router NAT redirection works great but with the EA6500 NAT redirection fails.  I have the firewall setting to FILTER NAT REDIRECTION unchecked so that's not the problem.
 
Seems very odd.... and only seems to happen with the EA6500..... the work around is to use the local IP address when the client is on the inside and the public address when on the outside, but what a pain that is....

View 9 Replies View Related

Linksys Wireless Router :: Reverse NAT On EA6500?

Oct 9, 2012

Any work around to enable reverse NAT or similar functionality on the EA6500? I recently upgraded from a Dlink that did support reverse NAT to my internal devices through a dynamic dns service. Now I have to know the IP address for all the devices.

View 1 Replies View Related

Linksys Wireless Router :: EA6500 Getting Different Ip Instead Of Default Ip

Nov 27, 2012

i setup my new EA6500 with the ethernet cable from my cable modem plugged into the EA6500, but with my old E4200 still switched on, but disconnected, i seemed to have ended up with a ip address of 10.250.27.47, not the 192.168.1.1 i was expecting, which i had with the E4200, my question is, is 10.250.27.47 something i should expect with the EA6500, or do i need to do a factory reset on the EA6500 and start again with everything else switched off as a precaution ?

View 6 Replies View Related

Linksys Cable / DSL :: WAG54GS Firmware Upgrade?

May 10, 2012

My router refuses to link to the internet. Status indicates Interface: Down. I thought this was probably a firmware upgrade issue but can only find v1.01.03 which is already installed. Linksys website has no firmware listed for download.
 
I have downloaded and re-installed the v1.01.03 .img file with no effect. Is this the latest firmware for this model?

View 1 Replies View Related

Linksys Wireless Router :: EA6500 Broadcasting Two 2.4 MHz Channels?

Oct 30, 2012

I set up EA6500.  All kinds of problems with anything on the 2.4 MHz band.  My wireless desktop on the 5.0 MHz band was flawless.  So I ran Xirrus Wi-Fi Inspector (freeware).  The router is transmitting two 2.4 MHz signals!  One is the SSID I set up and named.  The other one is identical in every way except that the BSSID is slightly different.  It is a non-broadcasted SSID that shows up on every device as "Other Network."  I was on the phone with Cisco Support tonite, and they were great as usual but had no answer.  If you change the channel on the 2.4 MHz band, the shadow network also changes to the same channel (this blew the Tech's mind).  We reset the router to factory settings and started over.  They are calling me back tomorrow.  This router has great features on paper, but so far, it has not delivered. 

View 5 Replies View Related

Linksys Wireless Router :: Functionality Lost On EA6500?

Oct 2, 2012

The only way I could get my EA6500 to work as auto DHCP to my Roadrunner Motorola SBV5220 Surfboard cable modem was to disable IPv6 support on the router.  It appears that the EA6500 attempts to issue the DHCP request for address assignment from the modem using IPv6.  I could see the status of "Connecting" for IPv6 in the Diagnosis Reports and it would hang.  Once I disabled IPv6, the modem assigned an IPv4 address and everything worked fine.  However, am I giving up any functionality by having to do this?  I bought this router and the WUMC710 Universal Media Connector for the 5GHz connectivity for streaming and just wondered if I'm impacting UMC performance or any other functions of the router by having to disable IPv6.

View 1 Replies View Related

Linksys Wireless Router :: EA6500 NAT Multiple IP Addresses?

Jan 23, 2013

I currently have my EA6500 behind verizon fios router. I have 5 static IP addresses assigned to FIOS router, however the machines I want to connect to are behing EA6500. It's a dual NAT scenario:
 
Public IP - FIOS Router - 192.168.1.0/24 network - EA6500 - 192.168.2.0/24 network
 
What I would like to do is for each public IP address, I would like to forward traffic to a particular host on 192.168.2.0 network. I can easily configure FIOS router for static NAT and assign one internal IP (from 192.168.1.0 range) for each public IP. However, I don't see a way to assign multiple IPs from 192.168.1.0 network to EA6500 internet interface.
 
I don't want to use EA6500 as a bridge as it will pretty much reduce my EA6500 to a very expensive GigE switch.
 
Is this possible? Or should I replace it with something more useful like a business router? This is for my home so I would like to avoid buying an expensive business router.

View 1 Replies View Related

Linksys Wireless Router :: EA6500 Without Cloud Connect?

Mar 4, 2013

I am interested in running the EA6500 without all the Cloud Connect software etc. Is this possible? Is there a basic way to set this up without that requirement?

View 1 Replies View Related

Linksys Wireless Router :: Unable To Connect To EA6500

Apr 13, 2013

I just bought the EA6500 last week. Had to RMA it on Monday and got the new one today. The issue still persists. The power light is constantly blinking and my computer is unable to obtain an IP address from it. I contacted tech support and was unable to get the issue resolved so I had it exchanged believing it was defective. The new one does the same thing. When I connect my computer to it, the light on my Ethernet port stays a solid orange instead of green like it does for my usual router. The Cisco light is constantly blinking.

View 9 Replies View Related

Linksys Wireless Router :: Unable To Map Drives With EA6500

Mar 8, 2013

I have two USB drives connected to my EA6500. When I use the ip to connect to them everything works just fine, but I cant map the drives. If I access map drives, I cant do anything with the files. It looses connection all the time.

View 2 Replies View Related

Linksys Wireless Router :: Ping Go Up On EA6500 When Enable QOS

Feb 2, 2013

I've noticed that my pings on  all my devices go up when I enable QOS.This even happens on the PC which has high priority.The ping times go up by an average of 6ms, so if I normally have a 14 ping to a host it will now be 21.I've tested this by turning media prioritization on and off and everytime its turned on this seems to happen, although sometimes it requires a router or pc reboot before the issue arrises.

View 8 Replies View Related

Linksys Wireless Router :: IPhones Won't Connect To EA6500 On 2.4 GHz

Apr 1, 2013

I have it set up as Capri (2.4 GHz) and CapriHD (5 GHz). CapriHD was intended only for HD video traffic. My wife's iphone 4S can only use 2.4 GHz, and it suddenly quit connecting after 1-2 months of use. My iphone 5 can use either band and it can only connect on 5 GHz.  This problem MIGHT correspond to the recent firmware upgrade?  I was traveling a lot around that time so can't be sure that is a culprit.Really thought the problem was the hardware, so I replaced it with a new EA6500 and getting the same result.

View 2 Replies View Related

Linksys Wireless Router :: Can EA6500 Be Set Up As Access Point?

Mar 2, 2013

Can the EA6500 be set up as an access point connected to a remote router which has a connection to the DSL modem?I want to replace one of my wireless access points with a faster wireless interface, but this will be connected via hard wire CAT-5 cable located away from my modem/router.

View 3 Replies View Related

Linksys Wireless Router :: Difference Between Ea4500 And Ea6500

Oct 5, 2012

linksys ea4500 vs the linksys ea6500? is there any real difference?

View 2 Replies View Related

Linksys Wireless Router :: Ea6500 Resetting To Default?

Apr 21, 2013

This router is resetting to default(erase router name and passwords and resetting router login to default. only thing i see is my sons has a iphone that will use the wifi and i have set parental restriction on it during certian hours. This past 3 time it has reset in 2 weeks his phone with the parental restricions are common. one other thing is i use the app on my droid to check settings on the router .
 
so th ecommon points here are one one using wifi threw router and has restrictions on it and outer is me with the linksys app to log into my rrouter and make a change like yuring on parental controls on..
 
but what happens is the router will reboot and renames itself to cisc05179 and cleared all protection and sets router to unsecured.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved