Networking :: To Tunnel All Routers Traffic Through SSH Tunnel With WRT300n
Jul 24, 2012Environment :linksys wrt300n v1.1 which can have ddwrt-mega. Willing to tunnel all lan's outbound traffic through an ssh tunnel.
View 2 Replies
ADVERTISEMENT
Cisco WAN :: 7201 Option To Send All Traffic Through GRE Tunnel / L2TPV3 Tunnel
Jan 9, 2011i have a 7201 router with NPE-G2. i have a design which i have the option to send all the traffic through a GRE tunnel or a L2TPV3 tunnel.which method is more CPU consumption ?
View 1 Replies View RelatedCisco Routers :: Set A VPN IpSec Tunnel GW To GW Tunnel Between RV110W
Oct 17, 2012I am using a Cisco RV110W (Firmware 1.2.09) in a branch and I would like to create a VPN Tunnel to another site that has a Cisco RV042 (firmware v4.2.1.02)
What would be the correct Configuration? the current configuration I am using is
in the RV042 i am using
Check Enable
Local Group Setup
Local Security Gateway Type : IP Only
IP Address : RV042 Pulbic IP address
[Code].....
Cisco VPN :: V2 And V3 RV082 Routers - No Traffic Gets Through Tunnel
Feb 13, 2012I'm trying to setup a VPN between an RV042 V3 and an RV082 V2 router. They get connected but no traffic gets through the tunnel. I tried with and without firewall,DPD, Keepalive, forward secrecy but nothing worked. What should I do? I don't want to throw out the V2 routers. V3 to V3 connects fine.
View 1 Replies View RelatedCisco Routers :: WRVS4400N - VPN Tunnel Up But No Outgoing Traffic?
Jan 29, 2012we've buyed a WRVS4400N to create a IPSEC VPN tunnel to our client in order to access some applications.
After a while trying to configure the router, we have archieved it and the VPN tunnel is up. We can see the tunnel up from here and from client's side as well.
Our client supposendly have created the tunnel in order to access a list of specific IPs in the range 10.113.x.x, but if we try to access this IPs via telnet whe cannot obtain any response.
Making a tracert, we obtain...
C:UsersHuexxx>tracert 10.113.56.177
Traza a 10.113.56.177 sobre caminos de 30 saltos como máximo.
1 1 ms 1 ms 1 ms 192.168.0.1
2 * * * Tiempo de espera agotado para esta solicitud.
3 * * ^C
... and therefor the client doesn't receive any packet at its firewall.
I've tried to establish a static route for 10.0.0.0 255.0.0.0 to their remote gateway, but I'm unable to add any entry to static routing list... The router tries to do something, but afterall I cannot see the new entry...
What can I do to route the traffic through the tunnel?
Cisco Routers :: RV110W As VPN Client - Routing All Traffic Through Tunnel
Apr 3, 2012I am using a RV110W as a VPN client to establish a VPN conection since some months. So far everything works fine. But all traffic is routet thru the VPN tunnel. Now I try only to route specific adresses thru the tunnel but not the internet acess.
RV110W is in Gateway mode
WAN interface is connected with internet
I am using PPTP with PAP and MPPE for VPN
so far no static routes (I could not set e.g. a route to 0.0.0.0 because web-interface says its not a valid adress)
Goal is to route only traffic for the target network thru tunnel and the rest direct via WAN interface.
Cisco Routers :: RVL200 IPSEC Channel All Or Some Data Traffic Through Tunnel
Jan 2, 2013Is it at all possible to channel all/some data traffic through an established ipsec tunneled connection using the RVL200? I have successfully established an ipsec connection through RVL200 and RV042 routers and are able to connect to servers/computers behind it.Now I want to channel all or some traffic through the ipsec-tunnel for computers that reside on 192.168.1.0 subnet of RVL200 network.
Main office - RV042 router - 10.200.62.1
Remote office - RVL200 router - 192.168.1.1
I am trying to use the Advanced Routing option to add static routes but I am not 100% sure if I am configuring the routes correctly.To give an example of routing DNS requests for HOTMAIL.COM [65.55.72.183]: [code]For some reason this does not appear to work. I have also tried using the interface setting of WAN and tested - this also does not work.
Cisco Routers :: Rv220W / Assign Vpn Traffic To A Vlan When Setup An Ipsec Tunnel?
Apr 7, 2012i'm using an rv220W and i whant to know if is it possible to assign vpn traffic to a vlan when i setup an ipsec tunnel?
example:
Im using different vlans on my rv220W.
Vlan 10: engineers (ex: 192.168.1.0/27) no intervlan routing
Vlan20: sales (ex: 10.0.123.0/24) no intervlan routing
This is what i need: - An engineer is on the road and when he makes a ipsec vpn connection => assignd to the vlan "engineers" so he can access the server/pc's in that vlan.and when someone from the sales group starts a vpn connection he needs to be in the vlan "sales" so he can access his pc/data,...
Cisco Routers :: 527W Unable To Route Traffic Via APN Backup Without Disabling VPN Tunnel
Oct 9, 2012I have a Cisco 527w which we are wanting to deploy to our remote sites however i've found a bug. We use ADSL with an IPsec tunnel as primary and 3G APN for failover . When the ADSL goes down the route via the IPSec tunnel remains and i am unable to route the traffic via the APN backup without disabling the VPN tunnel .
View 0 Replies View RelatedCisco Routers :: ASA5520 And RV042 - Tunnel Get Connected But No Ping / No Traffic Between Both End Network
Sep 13, 2011I configured ASA5520 and RV042 for site-to-site IPSec VPN tunnel.Tunnel get connected, but no ping, no traffic between both end network.
Network:
=======
192.168.113.0/24----------192.168.113.6 -ASA--------public, static IP address------Cisco 2821--------Internet
192.168.10.0/24-----------192.168.10.1 -RV042-----public, static IP address------Cisco 2821--------Internet
ASA5520 config:
----------------------
name 192.168.10.0 VPN
!
interface GigabitEthernet0/1
nameif NET
security-level 100
ip address 192.168.113.6 255.255.255.0
[code]....
Cisco WAN :: 1941 Router - Enable IPSec Virtual Tunnel Interface With Tunnel Mode IPv4
Sep 23, 2012I'm in process of purchasing a new Cisco routers for our branches that will be used primary to enable IPSec virtual tunnel interfce with "tunnel mode ipsec ipv4". does the default IOS IP Base supports this feature? or i need to purchase DATA license or SECURITY license?
View 4 Replies View RelatedTunnel All TCP Traffic To UDP Under Port 137?
Mar 13, 2012is it possible to tunnel all TCP traffic to UDP under port 137?
View 1 Replies View RelatedCisco VPN :: PIX 515 NAT Only Some Traffic In VPN Tunnel?
Nov 15, 2011Currently I have users that connect with the Cisco VPN client to our PIX 515e. Our corporate network is also directly connected to our partners network, sharing common address space. I want to be able allow our VPN users to connect to certain resources on their network. Since they already have routing for our address space, can I allow the VPN to only NAT traffic to certain destination addresses with a local IP address on our network? That way the partner's network does not have to change any routing since they would see the source address as a local IP on our network.
View 1 Replies View RelatedCisco VPN :: Tunnel With WRVS4400N Need To Push 2 IPs Through Tunnel?
Jan 23, 2012There are a few situations were I'd like to be able to use the locally configured account on a device but still have ACS in place.I want to complete this WITHOUT adding the locally configured account into ACS.I have tried setting the advanced option under Identity for if an account is not found to "Continue" however this causes the account to be allowed as long as a password is typed (any password, as long as its not blank).
View 2 Replies View RelatedCisco :: No Traffic Gre Tunnel 2901
Nov 6, 2012I try to make a gre tunnel with 2 cisco routers 2901, ping responds between tunnel ip's ends, but I don't have pings from the pc's inside the networks. [code]
View 7 Replies View RelatedCisco VPN :: 2821 - Nat Web Traffic From Tunnel
Jan 23, 2012i have 2 routers, 2821 and 2811. they are connected via GRE over IPsec, and all of the traffic from 2821 is being routed to 2811 with a default route to its tunnel interface. 2821 needs to access internet through 2811 valid ip address, my question is that how should i nat the traffic on 2811 so that 2821 can access the internet?
View 1 Replies View RelatedASA5505 - Tunnel A Specific Traffic Via VPN
May 20, 2012I have a number of sites in China, they have decent inter-country connectivity but poor connectivity when going overseas.
We have a single site in China witha dedicated 1:1 leased line that has good conectivity both inside and outside of China.
All the sites in China have ASA5505 firewalls
One of our Citrix farms is hosted in the UK and although the main site with the leased line is fine accessing the farm the other sites are not. I would like to try and tunnel just the citrix connectivity via a VPN to the China head office then use their connection to get out to the farm.
how to tunnel all traffic but not just specific traffic over the VPN.
Cisco VPN :: No Traffic GRE Tunnel 2901
Nov 5, 2012I try to make a gre tunnel with 2 cisco routers 2901, ping responds between tunnel ip's ends, but I don't have pings from the pc's inside the networks.
[code]....
Cisco VPN :: ASA Or 871 IPSec L2L To SSG-140 - Tunnel Is Up But No Traffic
Aug 8, 2012i am curently troubleshooting a ipsec l2l VPN between
1. ASA 7.2(4) to SSG-140
2. Cisco 871W to SSG-140
In both scenario's the tunnel is nicely established, and traffic goes into the tunnel, but nothing comes out. All encap's, but no decap's
It seems like a routing issue, but we can not find anything on both sites.
So maybe i m running into a (known) issue between cisco VPN equipment and the SSG-140?
Could it be a proxy-id issue? Cause they configure stuff like 10.1.1.0/24 and i configure 10.1.1.0 0.0.0.255
How To Tunnel HTTP Traffic In VPN Based Connection
Mar 1, 2011I have Site(s) Ani....i=1,..10 sites which communicate with site B to access a website/application. That's simple enough. However, the traffic is http well we primarily don't need https on ipsec tunnel right?. But since attacks related to eavesdropping of traffic come a real reality once it gets terminated by the ipsec device on both side.I have two options either to purchase a third-party ssl certificate to encrypt the traffic between two nodes or use a custom made one.I don't want to use a custom made one because this make the browser prompt an ugly untrusted certificate message; its ugly not from security perspective but for clients inconvenience and assuring users confidence in our systems is a critical issue for us. ?
a) How its possible to remove ugly certifcate message from user screen? Does the company need to register its certificate to some kind of CA body? or what ...
b) Due to some tcp acceleration issues, ssl traffic slows down the traffic between the nodes so we only require the encryption to stand just during the initial handshake when the username and password are being validated ; after that we want to revert back to http?
Cisco Firewall :: ASA 5520 VPN Tunnel Up But Not Traffic
Nov 1, 2012We just migrated from a single 5510 to a dual (failover) 5520, It seems that everything is working except the remote VPN. We can establish a tunnel and authenticate as local users, (going to LDAP when all is working) but no traffic is passing. I know I am overlooking something but cant see it. [code]
View 12 Replies View RelatedCisco VPN :: Tunnel Between Asa5505 And Fortigate 80c Up But No Traffic
Nov 27, 2011I have set up an ipsec tunnel between a Cisco ASA 5505 and a Fortigate 80c. The tunnel is set up as I execute pings from inside behind ASA to inside behind FG, however I cannot get connectivity to hosts behind the Fortigate (traffic is allowed through policies configured on the FG). What I noticed in packet tracer is that traffic is dropped at the step 'Vpn lookup' To troubleshoot I have configured a test ('fake') vpn connection through the vpn wizard and get the same result in packet tracer. I run 8.4 software on the ASA and this is part of the relevant config.
View 1 Replies View RelatedCisco VPN :: 7200 - Traffic Is Not Passing Through Tunnel?
Nov 17, 2011I have set a tunnel between Cisco pix 6.3 and Cisco Router 7200. Show Isakmp sa showing below detail on Pix
Total : 1
Embryonic : 0
dst src state pending created
xx6.x71.x29.x68 x2.1x7.52.1x1 QM_IDLE 0 0
Is tunnel is UP ? Traffice is not going throgh the tunnel . why ?
Cisco VPN :: RV042 - Cannot Route Traffic In The Tunnel
Jun 6, 2011I have a two RV042 VPN Router, I successfully connected the IPSEC tunnel. I cannot route Traffic in the tunnel. See the diagram.
MAIN Network
10.252.x.x
-------------->
FIREWALL
a.a.a.1
INTERNET
RV042a WANa <<------------------------------->> WANb RV042b
a.a.a.2 b.b.b.b
In this manner the network of b.b.b.b wil connect to the Main Network 10.252.x.x, unfortunately I can't pass traffic to RV042b going to RV042a. Everytime I trace the route, the traffic goes outside the Internet not to RV042a.
Cisco VPN :: No Traffic Over Tunnel Between ASA 5505 And 5510
Dec 5, 2010I've a asa 5510 on the main site and different ASA 5505 on secundary sites for VPN tunneling between the sites. The problem is that the tunnels are acomplished but no traffic is going over them. What am i doing wrong? For the moment there is a ASA 5505 on the main site managing the tunnels but I want the 5510 to take over the job.
View 5 Replies View RelatedCisco VPN :: 881 / Route Traffic Thru IPSec Tunnel To DMZ
Jun 29, 2011I need to route traffic to DMZ (and internal) from the branch office thru the IPSec tunnel. How do I manage that with my Cisco 881?
View 1 Replies View RelatedCisco VPN :: 1700 / Route Traffic Over VPN Tunnel Like In GRE?
Jun 15, 2012I'm station overseas and it's really hard to access certain websites and servie like Netflix or ESPN. What I had created was GRE tunnel from my Home "A" to my current location "B" and route my traffic from point A to B using 2 cisco 1700 routers ( and It was working great) but now I can't use GRE nomore. I still have PIX and ASA on both sides and I was trying to do that over VPN tunnel but I can't ping VPN tunnel gateway( basicly what was next hoop in GRE) on the other end ( which is the main problem why I can't route traffic to remote site). I was wondering if I can still do the same thing over VPN tunnel that I did with GRE tunnel.
View 1 Replies View RelatedCisco VPN :: ASA 5505 - L2L Tunnel Up / No Traffic Passes
Feb 4, 2013Two 5505 ASA's for a customer main site and a local office. I have the tunnel up. But I'm unable to pass traffic across it.
Main Site:
ASA Version 7.2(4)
!
hostname Town
enable password iNbSyJZ1ffmb9kn1 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
[code]....
Cisco VPN :: Tunnel Between ASA5510 And Pix Router Allows All Traffic?
Oct 1, 2011We've created an ipsec VPN tunnel between our ASA5510 (8.3) and a Pix firewall (not sure of the specific version, etc).
The tunnel works fine, except for timing at times (traffic only goes through a few times a day), and a wierd problem with all traffic being allowed even though I'm only allowing specific ports (SFTP, SQL Server 1433) from a network at the client site to a specific server in our Data center.
I was surprised that I could RDP into the server, as well as telnet any other port exposed on this server from the client site. Now as I write this i realize that I did not check whether any of our other data center servers can be reached via the tunnel.....
Not having set up many VPN tunnels before using ASA (only Checkpoint - Checkpoint before this), I'm wondering whether i need to include another rule in the VPN tunnel cryptomap to deny all other traffic from their network to our network, or whether there's a global config I need to add a rule to.
I am moderately conversant in the command line, but because of my lack of Cisco VPN tunnel experience I did use the ASDM site-to-site VPN tunnel wizard to set the tunnel up. Not sure if there were any defaults i would have to override using that method.
Cisco VPN :: ASA 5505 - IPSec VPN L2L Tunnel Up But No Traffic
Mar 19, 2011I have a Site to Site IPSEC VPN Tunnel created with ASDM wizard.
Cisco ASA-5505
Peer A: x.x.x.x
Lan A: 192.168.0.0 255.255.255.0
Fortinet FortiGate-50b
Peer B: y.y.y.y
Lan B: 192.168.23.0 255.255.255.0
I start traffic from LAN B with a ping (or telnet it doesn't matter) that receive no reply but tunnel goes up fine.
"show isakmp sa" seems ok (says "State : MM_ACTIVE")
"show ipsec sa" seems ok but all #pkts are zero
try ftp, telnet from LAN B to LAN A systems but no one work. "show ipsec sa" all #pkts are zero As soon as I generate traffic from LAN A to LAN B these works (with tunnel already up) also traffic from LAN B to LAN A works.Obviously if I end VPN and start tunnel making traffic from LAN A all work fine bidirectionally, LAN A reach LAN B and LAN B reach LAN A.No msg logged in either two appliance.
Seems a very strange problem because seems not related to Phase1 or Phase2 already established.Traffic (routing ?) start works only after at least one packet goes from LAN A to LAN B.No msg logged in either two appliance.Problems begun in ASA version 8.0(4) ASDM version 6.1(3) and remain/continue after upgrade to ASA Version 8.4(1) ASDM version 6.4(1).
Cisco VPN :: 881 / Route All Traffic Over IPsec Tunnel?
Jan 30, 2012We have 7 remote offices and 10 tower locations that utilize IPsec tunnels back to our HQ. We now want to force all traffic including web surfing through the tunnels. What would be the easiest way to acomplish this? I have tried utilizing the crypto map policy to do this, but was unable to acomplish this.
Each of our office locationss utilize a Cisco 2811 router and the tower locations utilize a Cisco 881.
Cisco WAN :: 870 - Divert Traffic Between Lan To Lan Tunnel And Internet
Sep 6, 2011we have two offices connected with a lan-to-lan ipsec tunnel. My question is about one of the sites.
At the site a Cisco 870-series router is used for connection to the internet and setting up the tunnel. Two subnets exist, 172.22.x.x and 10.30.x.x.
The router itself has an address in the 172.22.x.x-range. Traffic from the 10.30.x.x subnet needs to be able to reach:
- A host in our network over at the other office (also 172.22.x.x but other range). NATting is needed otherwise it won't traverse the tunnel because the lan-to-lan has only 172.22.x.x in its properties. - The internet. NATting is also needed otherwise it won't be routable on the internet. The packets need to go out of the router directly, not through the tunnel.
How do I accomplish this?
Here is a snippet from the config:
interface ATM0.1 point-to-point
ip address <public ip address>
ip nat outside
ip virtual-reassembly
pvc 8/35
class-vc Office(code)
Cisco VPN :: 1841 - IPsec Tunnel Two Way Traffic
Oct 23, 2012We are currently experiencing a problem on an IP SEC VPN tunnel that has all of us here completely stumped. We are hoping that one of you experts out there will be able to assist. Here are some basic details:
NETWORKS
An IPSEC site to site tunnel has been built between the two sites on different networks.
PIX 515E - MAIN SITE
Network 172.16.0.0/24
CISCO 1841 - REMOTE SITE
Network 172.16.99.0/24
ISSUE
All traffic flows over the VPN from the 172.16.99.0 network in the direction of the Pix, such as RDP, SIP etc. Pings will go in both directions across the tunnel. Other than the pings most traffic will NOT flow over the tunnel from the 172.16.0.0 network on the pix to the 172.16.99.0 network on the 1841. It would appear that something on the 1841 is blocking traffic coming in over the tunnel from the 172.16.0.0 network as we can not get a wire shark capture on a PC on the 172.16.99.0 network, other than the ICMP traces. Usually this is an access list problem but we have checked and double checked the configuration and can't see anything.
TROUBLESHOOTING SO FAR
1. Have tried inserting various access list changes to the tunnel on the 1841 to make specific reference to the 172.16.0.0 network.
2. Have tried various NAT entries.
3. Have removed and then recreated the VPN tunnel from a fresh start.
4. Have made the MTU 1400 on the inside interfaces on the Pix and the 1841.
The tunnel is fully up at all times and as we say can ping in both directions.
