SA700 IPhone Enterprise Controls
Aug 31, 2011
if any of you are controlling iPhones within your organizations. I was hoping to use JUNOS Pulse licenses on my SA700 to control things, but all they offer for iOS devices is SSL VPN. I can do remote wipes with activesync, but I'm worried about cloud backups of corporate data on mobileme, and setting and enforcing security policies in a scalable way. I know I can manually deploy XML config from the iPhone configuration utility, but that's a bit of a PITA for remote devices (ie other countries) that I'llnever have physical access to.
View 11 Replies
ADVERTISEMENT
Feb 4, 2012
We have a fast broadband service and three teenagers, two of which have laptopsWe are allowed 100Gb/month; if we exceed that, the we are charged $1.5/Mb. The provider has a web interface where we can check the last 24hours' usage. When ever we go over the daily budget, I ask the darling children who was watching all the videos-- to which they all say "not me".I want a wireless router with some admin features that allow me to see real-time who is the bandwith pig and shut them doI am not aware of any routers in the $100-$150 range that have these kind of features. There are industrial grade Cisco routers, but these have more features than I need and are really expensive
View 2 Replies
View Related
Dec 27, 2011
I have a friend who asked me how he could stop his children accessing porn etc on their ipods etc that they pick up from a wireless router.Is it possible to route a wireless signal through a computer that has parental controls?
View 1 Replies
View Related
Oct 28, 2012
Why the access controls don't work in firmware 2.07? I have some sites game sites disabled in my DIR-655. When I upgraded the firmware to 2.07, the router just didn't work until I removed all the access controls features that I had enabled. I started over, downgraded to 2.03, re-upgraded to 2.07, didn't bring in my saved settings, had everything with factory defaults. I then created one policy in access controls and added it to schedule, and bingo, the router didn't work after that.
View 1 Replies
View Related
Jan 19, 2012
I have an E4200 v2 I would like to set parntal controls on school nights only. Currently if I select parental controls for specific times I must set times for both school nights and weekends. I would like to be able to type in times that are not available in the dropdown lists. Currently I am limited to the drop down list. Is this a change that can be made in the near future.
View 9 Replies
View Related
Mar 13, 2013
I need to set parental controls on a device EA3500. Problem is that the device is listed under the same icon as a device I don't want restricted. If I click on the icon it lists one MAC as wireless 1 and the other as wireless 2 but still as one device name. One is an Xbox (the one I want restricted) and the other is a PC on Windows 7. I can only set up parental controls by icons/device names, not MACs and MAC filtering is a pain as I have to add and remove it everyday at a certain time.
View 3 Replies
View Related
Dec 2, 2012
I can't find any parental control options on the sidebar but have read that it is an option with this modem-router.
View 1 Replies
View Related
Jan 31, 2013
I would like a feature added back into the firmware to allows website blocking and able to cutomize the day(s) and times to have it blocked in addition to when I may have the internet turned off. This way the kids pc will allow them to do homework without the ablity to screw around on youtube or groveshark. My WRT54G aloowed me to do this, why can't a newer product do this?
View 1 Replies
View Related
Mar 11, 2013
I'm used to seeing DWDM and muxes being used in the service provider world, but when and why would an enterprise want to use this kind of gear?The two basically lets you combine streams of signaling from many different physical sources into one media, but can't a VLAN trunk or a routed link, for example, do the same? Sure, they all operate at different layers of the OSI model, but in all cases you're still getting separate streams of data from Point A, putting it all on one wire, and sending it to Point B.
View 8 Replies
View Related
Apr 28, 2011
I have tried everything including removing the system, changing the network settings, using cmd.exe, ect. they all say access denied and theres no possible way to get around this.
View 2 Replies
View Related
May 21, 2013
Not sure if this belongs here on in a different section. We are in the process of purchasing a new ACS 5.x appliance. I would like to take a look at implementing WPA2 Enterprise with our Cisco APs.
View 4 Replies
View Related
Jan 30, 2013
I have a Linksys EA4500 Router. Both my kids have laptops. I've tried using the Parental Controls to restrict access to certain websites and also to put in timeframes that they're computers can't access the Internet. However, it does not work at all! I've tried turning off their computers and then resetting the router after I made the changes, but the access restrictions do not work. We also have their Xbox set up on the router -- so maybe some of the settings we have for the Xbox are messing up Parental Controls?
View 7 Replies
View Related
Jan 14, 2013
So I've realized that my parental controls were being ignored by the computers, at first I figured my son had found a work around to by-pass. But reading through the forums today, I've found that IPv6 being enabled might be the cause of my issue. So I'm currently sitting at work and connected to my router remotely, but for the life of me, can't see where to disable this option. Using the Smart Wi-Fi interface, closest I can get is "Connectivity, Internet Settings, IPv6 but everything is grayed out and no option to edit this.
View 9 Replies
View Related
Mar 31, 2013
I am new to the forum and Linksys products. i have always been a Netgear fan. What brings me to Linksys is the Smart WIFI parental controls. My children have iPod touch and Kindle Fire. I want to "manage" the content (Youtube, internet, etc..) on these devices. I want to be able to control when they have access to the WIFI and when they don't. Another words, I want to go the router web interface and find the device and turn OFF the connection without affecting the rest of the house.
I was looking at EA6500 router as a pontential new router. Would this router give me the control I need?
View 6 Replies
View Related
Jun 19, 2011
How to treat your enterprise network in terms of security? Do you firewall between sites? Between subnets? I've been a little gung-ho with packet filtering, and the more the network is growing the harder is becoming to make that scalable and manageable. It's looking like a pretty good idea to just open up access to/from all my sites. I'm going to continue locking down user areas where we can't necessarily trust the boxes, but all our server subnets I think can be opened up to unfettered access.
View 4 Replies
View Related
Aug 26, 2011
I want to change the SSID on all my APs without it affecting the connected devicesThe users should possible not be affected with the connecttion to the wifi networkHow can I go about it?
View 3 Replies
View Related
Jun 29, 2011
Is there a way to set school day parental controls into the afternoon? During the summer months it would be very useful to set the time for access to late afternoon/early evening. It would seem that giving both AM and PM times is a simple fix.
View 9 Replies
View Related
Aug 14, 2011
With all the WiFi ready devices that kids (and adults) have these days, a limit of 5 targetted devices for permissions is hardly enough. I suggest increasing that limit to at least 10.
View 5 Replies
View Related
Feb 21, 2012
I've been using router for approximately three weeks with little to no problems and today the Paretnal Controls lost control. Anytime they were enabled they prohibited the associated computers from acessing the web even though the specific times was set to midnight -6am. Strangely, this has worked fine for three weeks and the only way I could get things back working correctly was to reboot the router. Just another firmware bug?
View 1 Replies
View Related
Feb 14, 2012
I recently purchased an E-2500, but notice that in parental controls I can only block 6 or 8 websites. In my WRT54GS I could just create additional rules and they would work. But in this device I am limited on the sites that can be blocked per device. How I can block additional sites?
View 1 Replies
View Related
Apr 8, 2012
Have set up parental controls for other devices via web interface. It does not take for one laptop. I see the device can add it to list but all settings dont work? Have reset router, removed and re-added device called support but found no solutions.
View 1 Replies
View Related
Feb 11, 2013
EA4500 Is there any way to enable parent controls on everyone who logs in over guest access? We have a lot of youth who use the network, but we only give them guest access so that they can't access network machines. I enabled Parent Control, but I couldn't find a way to say "Parent Control enable for Guest Account".
View 1 Replies
View Related
May 29, 2012
I have an E3200. I cam block youtube on my laptop but my kids can still by pass all my website blocking by using the ipad.
How do i configure the router to block access to websites on my ipad?
View 1 Replies
View Related
Jan 5, 2012
I want to create a network with a bunch of routers and switches to be used as a test network for company employees to remotely login and learn networking.I don't want this network to interfere with the rest of the network in any way.I am basically trying to create a stub network or a passive network!!
View 4 Replies
View Related
Oct 29, 2011
Recently bought a laptop HP Pavilion DM4 with Windows 7 home premium 64 bit for use in a college wireless environment. The school insists on WPA2 Enterprise connection, which is supposedly the recommended Microsoft security protocol for Win 7. I have all the correct settings, such that I can routinely connect to the wireless network but on this model HP I consistently get speeds way under 10kbs, while if I use EXACT same settings on a different Lenovo, Dell, or other models of HP get speeds of over 5MG. Yes 500x faster.Of course HP wanted to blame the network, but after sending 2 technicians to visit on campus, they agreed it was their hardware, so they sent a replacement unit. Unfortunately, the replacement unit has the EXACT same problem. BTW the problem computers do connect flawlessly to other wifi networks at full speed, just not the WPA2 Enterprise network.
View 1 Replies
View Related
Jun 26, 2012
I want to reinstall the MSE image that was sent to me by Cisco TAC Team, however when I try to reinstall the MSE Application, however when I try to install it, the CD boots and show me the Red Hat enterprise image, then sends me black screen with the message "Kernel alive, Kernel direct mapping tables up to 480000000 @ 8000-1b000" and it stay there.
View 2 Replies
View Related
May 2, 2012
I have a Win2008 server set up as a radius server (192.168.32.71) and a stand alone AP (192.168.201.9) [code]
View 3 Replies
View Related
Dec 19, 2011
OPTEMAN: 3 routers connected via a private subnet (/29) over the OPTEMAN: Site A, Site B, and HQ. Site A is a 3560 that is the gateway for two subnets: siteA1 and siteA2. SiteB is a 2621, and HQ is a 6509 w/ MFSC.
HQ also connects to 4 other sites via MPLS: SiteC, SiteD, SiteE, and Site F.
HQ has the server subnet, Internet connection, and connection to other services via MPLS.
I have basic EIGRP setup on HQ, SiteA, and SiteB. So far only siteA and HQ are updating each other. Not sure why. I am looking for the best practice example of how I should setup my enterprise EIGRP. I currently use static routes between the sites. I would prefer to be able to setup EIGRP in parallel, the remove the static routes.
View 2 Replies
View Related
May 11, 2011
I'm looking for documentation on the Enterprise mesh solution based on 7.0 MR1...In this release e.g 802.11n APs are supported and clean air for the client radio etc...The current Cisco Mesh Access Points, Design and Deployment Guide is based on the previous 7.0 release.Apart from the configuration guide I can't find any additional guides.
View 1 Replies
View Related
Jan 13, 2013
I currently work for an enterprise that want to deploy wireless network (6AP for now) and I'm the one who will manage and install it.I had initially planed to deploy Ubiquiti network because I've heard lot of good thing about them. But they did not wait me and bought (crappy?) HP access point (MSM410)
What do you think about HP wireless network ? They did not yet buy the access point controller and I'm not sure they want to buy one.I can't find any review on the HP solutions it looks like no one is using it.
Do you recommend me to continue with the HP solution and buy a HP controller or go with Ubiquiti and rebuy the access points (no so much expensive in comparison with the price of the HP controller alone)
View 19 Replies
View Related
Mar 5, 2012
On my new E4200v2, after I tried to move beyond the disappointment of Cisco removing Internet Access Policy entirely, I decided to give the stripped down Parental Controls a try.
Sadly, I didn't have any luck doing what I needed to do... block my Tivo's from accessing Youtube.
I enabled Parental Controls, Added the Target Devices (my Tivo's did show up), and added "Youtube.com" as blocked site #1. Saved. Entered the parental password when prompted. Even rebooted the router.
But Youtube wasn't blocked. So I added to the target list a non-Tivo device (a Macbook) for a reality check, and rebooted the router again... still no luck. Youtube still not blocked.
So then I started to wonder if their Parental Control depends somehow on the local DHCP server & Client list. Because my E4200 has DHCP Server = OFF (I have always used a Windows Server for DHCP).
I tried to call Linksys support to get this working, but after 45 mins, including escalation to senior engineer, they really were pretty useless (no real familiariarity with my problem) then they disconnected my call!
View 7 Replies
View Related
Jun 21, 2010
I bought a brand spanking new Linksys E2000. I get great connection speeds and awesome range, until the day I set up parental controls. Once I set them up, It slowed my connections down to a crawl. Thinking that I did something wrong, I reset the router and did the entire installation. Everything was back to normal, but it did it again once I set up the parental controls.
View 9 Replies
View Related
May 13, 2012
I setup several devices in the Parental Controls to be blocked always. These devices are still able to connect to the router. I tried rebooting the router but the problem persists. I have two laptops and two iPod Touches that can connect regardless of the access restrictions.
View 5 Replies
View Related
