Security / Firewalls :: In Windows 7 Internet Not Responding?
Aug 28, 2012
Windows 7 I could not able to browse internet, because it showing DNS problem. But I can able to ping my gateway and I can able to get internet in Windows Xp. I am using firewall in my campus. There is any problem in my firewall?
i am using windows vista on my laptop.i was using zone alarm firewall, but switched it to windows firewall.after switching, my internet was cutoff. i can see that i am connected to my network, but cant get to internet.when i run diagnosis on my laptop, it gives me three options:
my Ethernet driver is having hardware issue.
my wireless driver is having hardware issue.
ip protocol binding is having issue. check ipv4 and ipv6 settings.
I need remote access to certain programs on my home PC but I just cannot get it to workWhen I set the programs port preferences (i.e. port 8087), I can connect with "127.0.0.1:8087". both the utorrent and webcamXP work fine. But when I replace the localhost with my external IP (lets say 188.8.131.52, so that would be "http://184.108.40.206:8087" in the case of webcamXP and I tried port forwarding: I have added the port to my NAT in the router's setting so it should be fine, but it is not (numbers are fictual of course)[CODE]
I have disabled windows firewall in Windows 2003 server control panel but only few ports are shown opened when i scanned with advanced port scanner why other ports are closed.How to open the closed ports?
At my small business (30 employees) we currently don't have a hardware firewall. Should I have one? If so what do you recommend? We are all connected to a Windows Server 2003 domain in one office building.
I have a sonicwall tz-170 that has a standard interface. It is the main system with IP 192.168.1.1.Another location using IPs 192.168.0.1 has a dvr (192.168.0.154) with ports 80, 37777 and 37778.I can access them from the main location just fine but setting up a service then a rule does not allow me to connect from outside the network. I assume this is the same for anything trying to reach the other side of the vpn but I'm not sure
I've got a problem with Norton 360 6.0. Everytime it updates its definitions, my internet disconnects and I have to reboot my computer to get it back. However, every time I try to command prompt a ping, it says I'm connected as does my networking center.
I installed Comodo Firewall today, and I couldn't access my Internet from then. I actually liked it's UI and all and want to keep it. The only something that I felt that might be causing the problem is "Use Comodo Secure DNS Server"? Is it likely the reason to be the cause of the problem?
I'm having some problems with a sonicwall pro2040. The problem is this: I can access the sonicwall remotely, and I can ssh into the sonicwall and ping various websites, and get replies, but my connected PCs (Connected by the LAN port) have no internet access. I have never set up a sonicwall before this one, and I feel like there is something I may be missing. Do Sonicwall devices block WAN access by default? Do I need to configure the default route?
how can I set password for my wireless internet? I used to have one, but today I have fully restarted modem and router to factory settings, so password is gone. Now I'd like to set it up again, I have TP-Link router.
I am having some trouble with the antivirus software.I had AVG antivirus installed but I thought it was causing some problems.So I unistalled it and downloaded a trial version of Bitdefender.Got it installed and found out I can't browse the web via Firefox. So I was trying to go through all the settings in Bitdef. but no luck.Uninstalled BD, rebooted the comp, still no internet. I did clean the registry and spyware as well.But the weird bit is that somehow I can browse the internet using old IE8 (64bit only. 32bit is not working?).I was also trying to re-install AVG but it could not complete as the connection with their server was blocked.It seems like something is blocking everything apart from 64bit ver. of IE8.
I'm finished with formatting my computer to install a clean Windows 7 Ultimate. Then, I connect my PC to the modem I have, to browse the Internet of course. Well, everything runs fine on the first start, let's say I have installed Google Chrome, Microsoft Office, and some other software I still not installed it. And when I restart it and tried to run Google Chrome for example, it said "Google Chrome has stopped working", it's happened to almost every software in my PC, let's say I tried to install VirtualDJ, then the Installer is corrupted, so was the Google Chrome installer and Microsoft Office Installer. Before they are all corrupted, there was a suspicious thing named 'winblmguf.exe' trying to access the Internet through my firewall.
I have been having some issues with Windows Audio needing to be restarted every time I log on. Also my theme has changed unexpectedly. I also noticed that Wndows firewall isn't started and it won't let me start it it gives me this...Could not start the Windows Firewall/Internet Connection Sharing (ICX) on local computer. Error 3 access is denied.
So, I have this router at home a WRT150N. I put in access restrictions so my siblings won't stray onto unwanted pages.I enabled SPI Firewall Protection and what do you know, it worked. The next day though, we didn't have an internet connection.I checked everything with the modem (power cycles, etc.) and then I tried the router. Upon disabling SPI Firewall Protection, the internet connection came back.I tested it yet again, to see if it really was the SPI. Enabled and bam, no internet access again. I made sure to select "Allow" in the Access Restrictions for "Internet access during selected days and hours" making sure also that "Everyday" and "24 Hours" are selected.Now my question is, what do I need to do in order to enable my Access Restrictions without having to lose internet connection via the SPI Firewall?
Is it true that the FCC is investigating the Pogo game site because of poor security? Is Java the cause of this problem?I'm very leery of getting on the Pogo site because I've been told that my computer could get a virus and crash.
I'm new to IT, and have been put in charge of managing our servers hile my boss is on vacation.We currently have a Sonicwall Network Security Appliance that handles our Firewall/VPN and have web content filtering set in place.I have a user who belongs to 2 CFS policy groups that we have set up. I've double checked with Active Directory, and he is a member of both groups.
This person SHOULD have access to Job searches/ and Restaurants,but receives a "content blocked" message on his browser.It appears to me that the settings in Sonicwall are correct, as well with AD member groups.
I am trying to connect to a Security-enabled wireless netowork. I have the key. My problem is that I can't seem to figure out how to enter it. When I try to connect I open the "view available networks"window. I see the network name and it shows a strong signal (all 5 green bars).
I opened my iTunes program today and noticed a roommate's MP3 files were picked up on my network. I think the name of the program is Rocket Tube MP3. Anyway, I came on here because our computers use a Wi-Fi internet connection and I was wondering how much of my web activity (history, cookies, temporary files, etc) he could see from my laptop if his computer was a desktop downstairs. He's very tech-savvy (a former IT guy) and I don't want him snooping through my personal records.
We are a non-profit organization that is heavily reliant on interns that use their own laptops a lot here. My concern is they come in and connect to our wireless network with no supervision or anything else. I am worried they will introduce a virus, trojan, or something to our network. What the best way to keep them from introducing unwanted malware from a thumb drive, virus in email, or something to that effect shy of standing over them while they install and run an antivirus software?
I have problem with the Lan-to-Lan VPN tunnel.the VPN working fines since 9 months ago without any problems.Suddenly got the problem!,In last two days we faced problem the VPN down.in first time the problem in phase-2.. but after that in phase-1... in latest no data packet received to their side.
I am looking for some resources on what steps would be involved in configuring a Cisco ASA 5500 when obtaining a new ISP. Since our static IP will be changing with the new ISP, just need to know what configurations changes will need to take place. We currently have a working config with DSL, but are switching to cable. We are using a DMZ configuration, and are going to try using ASDM first since that should be easier
There are three Win 7 laptops on the LAN trying to connect to the ASA5500 Firewall. They generate a Severity Level 3 alert and try the same port three times then move to the next numerical port and try that three times. Is this a malicious Hack.
I have been trying to get into one website (url)The world's best online marketplace, List free Classifieds,buy and sell - auction,post a job and get hire from over 1 million top professionals. | Wanaifieds.com and I can't get into the site from my home I can get into the site everywhere else but here I called the service provider and their telling me it's not them they don't block website and the IP is not stationary so their nothing wrong with their end I called the hosting company of the website and they told me they don't block any IP's I don't know what to do I do remember when it was working about 4 days ago I tried something o the site and I messed up and I clicked back instead of putting my password a little box poped up and said something about a certificate or something but I just clicked off and when I tried to get back on the site.
I'm working with Cisco ASDM 6.1 for pix. I want some of ip addresses are not shunned thus provide a list of addresses which should not be shunned in threat detection, but some of ip addresses are shunned yet.
I want to block 10.0.0.1 and 192.168.1.1 but my router says invalid domain so if will the guess network be able to go to page 10.0.0.1 and 192.168.1.1 even though I don't block it? I have a bypass account but don't want anyone else to access 10.0.0.1 and 192.168.1.1. Also can you tell me some proxy sites I can block?