how can I set password for my wireless internet? I used to have one, but today I have fully restarted modem and router to factory settings, so password is gone. Now I'd like to set it up again, I have TP-Link router.
View 1 Replies
I forgot my password to my Belkin 54g wireless router. How do I reset the password or recover the original one?
View 5 Replies View RelatedIs there a way to get the password from one laptop, so I can enter it in the other one. I thought there was a way to make it visible, but I can't remember.
View 2 Replies View RelatedI've been trying to remove an invading computer from my network. My ISP told me to change the password on my router. I followed all instructions, but it returned to the original setting each time. I've been unplugging modem and router, whenever I am not online, but when I am online and the invader is also, everything is very slow. At one point I was not even able to get online, as I got the error message that another computer was using my IP address.
View 9 Replies View RelatedHow can I get the security key password for my iPad?
View 2 Replies View RelatedI am currently running a Windows 2003 Server Edition and I have an issue, we run a small piece of software for controlling the nights takings which connects to the tills database on the network.This piece of software is not password protected and is held in a safe, however it has come to our attention that an employee may have taken possession of a copy of this application and we need to block the application been run on the network.Now this is were it gets difficult, I know to stop the application I could just use the Software Restriction Policy with Hash Rules which would solve that. However the problem is that sometimes people WILL need to run this software on the network and not get blocked.These people may not have their own accounts etc so I am trying to workout a way that we can allow someone to bypass the software restriction policy with a password prompt, is this possible or is their another way around this issue?
View 1 Replies View RelatedHow to reset the admin password on a tumbleweed appliance. My company just purchased a building, and the previous tenant left behind a bunch of equipment.
View 4 Replies View RelatedOur office has three networked computers. 2 xp pro desktops and 1 xp media edition laptop. When I set up Access to work with all three I found somewhere that said that xp media has to have a password for that configuration. I'm hoping that was wrong. We backup from the Laptop (Media) to a desktop (XP) and it is currently requiring a passwordThe 2nd destop does not need a password to use shared folders on the main computer. The laptop (media) asks for a password the first time I try to connect to the main computer. I'd like to eliminate the need for a password. I have double checked the settings for gpedit.msc and the "limit local account use of blank passwords" is disabled
View 3 Replies View RelatedI'm looking to buy a wireless router that that allows me to block gambling applications.
View 3 Replies View RelatedI am trying to connect to a Security-enabled wireless netowork. I have the key. My problem is that I can't seem to figure out how to enter it. When I try to connect I open the "view available networks"window. I see the network name and it shows a strong signal (all 5 green bars).
View 3 Replies View RelatedI have a sonicwall tz-170 that has a standard interface. It is the main system with IP 192.168.1.1.Another location using IPs 192.168.0.1 has a dvr (192.168.0.154) with ports 80, 37777 and 37778.I can access them from the main location just fine but setting up a service then a rule does not allow me to connect from outside the network. I assume this is the same for anything trying to reach the other side of the vpn but I'm not sure
View 3 Replies View Relatedwe are provided wifi connections. But most of the sites are blocked by cyberoam. way to bypass this (NOTE)ultrasurf and freegate too failed...
View 2 Replies View RelatedWindows 7 I could not able to browse internet, because it showing DNS problem. But I can able to ping my gateway and I can able to get internet in Windows Xp. I am using firewall in my campus. There is any problem in my firewall?
View 1 Replies View RelatedSome security tools and techniques for wireless LAN??
View 1 Replies View RelatedRecently i had suffering with wireless connection problem, currently my wireless router connected to WAN directly, after that go into firewall and then go thru switch to end user PC, for LAN user there is no issue, but for wireless connected PC it is prompted with limited connectivity problem(DHCP is disable on router), after check with ipconfig /all. it seem likely due to wireless PC cannot get the IP from DHCP server. i am using DLink615 router. i had checked firewall setting there is firewall policy that connected all router ip into company LAN, but i don't think there is DHCP VPN setting up. is there anyway i can go thru firewall and get IP from DHCP server because if i set up DHCP on router, it cannot pass thru and access to LAN.
View 9 Replies View RelatedI've got a problem with Norton 360 6.0. Everytime it updates its definitions, my internet disconnects and I have to reboot my computer to get it back. However, every time I try to command prompt a ping, it says I'm connected as does my networking center.
View 1 Replies View RelatedI installed Comodo Firewall today, and I couldn't access my Internet from then. I actually liked it's UI and all and want to keep it. The only something that I felt that might be causing the problem is "Use Comodo Secure DNS Server"? Is it likely the reason to be the cause of the problem?
View 1 Replies View RelatedI'm having some problems with a sonicwall pro2040. The problem is this: I can access the sonicwall remotely, and I can ssh into the sonicwall and ping various websites, and get replies, but my connected PCs (Connected by the LAN port) have no internet access. I have never set up a sonicwall before this one, and I feel like there is something I may be missing. Do Sonicwall devices block WAN access by default? Do I need to configure the default route?
View 6 Replies View RelatedFound the internet not working after upgrade of versions. Managed a work around by disabling KAS2013 Firewall settings and using MS Firewall. (desktop)
This is not the correct way of config and as my laptop works fine with KAS2013 firewall enabled.
I checked system IP ...ipconfig settings and wonder about matching up gateways??
i am using windows vista on my laptop.i was using zone alarm firewall, but switched it to windows firewall.after switching, my internet was cutoff. i can see that i am connected to my network, but cant get to internet.when i run diagnosis on my laptop, it gives me three options:
my Ethernet driver is having hardware issue.
my wireless driver is having hardware issue.
ip protocol binding is having issue. check ipv4 and ipv6 settings.
I am having some trouble with the antivirus software.I had AVG antivirus installed but I thought it was causing some problems.So I unistalled it and downloaded a trial version of Bitdefender.Got it installed and found out I can't browse the web via Firefox. So I was trying to go through all the settings in Bitdef. but no luck.Uninstalled BD, rebooted the comp, still no internet. I did clean the registry and spyware as well.But the weird bit is that somehow I can browse the internet using old IE8 (64bit only. 32bit is not working?).I was also trying to re-install AVG but it could not complete as the connection with their server was blocked.It seems like something is blocking everything apart from 64bit ver. of IE8.
View 6 Replies View RelatedI'm finished with formatting my computer to install a clean Windows 7 Ultimate. Then, I connect my PC to the modem I have, to browse the Internet of course. Well, everything runs fine on the first start, let's say I have installed Google Chrome, Microsoft Office, and some other software I still not installed it. And when I restart it and tried to run Google Chrome for example, it said "Google Chrome has stopped working", it's happened to almost every software in my PC, let's say I tried to install VirtualDJ, then the Installer is corrupted, so was the Google Chrome installer and Microsoft Office Installer. Before they are all corrupted, there was a suspicious thing named 'winblmguf.exe' trying to access the Internet through my firewall.
View 6 Replies View RelatedI have been having some issues with Windows Audio needing to be restarted every time I log on. Also my theme has changed unexpectedly. I also noticed that Wndows firewall isn't started and it won't let me start it it gives me this...Could not start the Windows Firewall/Internet Connection Sharing (ICX) on local computer. Error 3 access is denied.
View 3 Replies View RelatedSo, I have this router at home a WRT150N. I put in access restrictions so my siblings won't stray onto unwanted pages.I enabled SPI Firewall Protection and what do you know, it worked. The next day though, we didn't have an internet connection.I checked everything with the modem (power cycles, etc.) and then I tried the router. Upon disabling SPI Firewall Protection, the internet connection came back.I tested it yet again, to see if it really was the SPI. Enabled and bam, no internet access again. I made sure to select "Allow" in the Access Restrictions for "Internet access during selected days and hours" making sure also that "Everyday" and "24 Hours" are selected.Now my question is, what do I need to do in order to enable my Access Restrictions without having to lose internet connection via the SPI Firewall?
View 2 Replies View RelatedMy Iphone 4s will no longer connect to my WRT54G Linksys router. I know it's a security issue because if I disable security, then it connects. I'm using WPA-Personal, AES, Mixed mode.I've already tried resetting the network settinegs on the iphone a couple of times.
View 3 Replies View RelatedI've recently spotted my router's configuration page is shown publicly if they connect to external ip or a domain name I've set up to my own IP through a web browser (it's a game server)I see it as a security thread, that everybody can connect to my router's configuration page and want that down asap!
View 3 Replies View RelatedI have windows vista and a Atheros adapter?is there a way to just go through control pannel?
View 2 Replies View RelatedIs it true that the FCC is investigating the Pogo game site because of poor security? Is Java the cause of this problem?I'm very leery of getting on the Pogo site because I've been told that my computer could get a virus and crash.
View 1 Replies View RelatedI'm new to IT, and have been put in charge of managing our servers hile my boss is on vacation.We currently have a Sonicwall Network Security Appliance that handles our Firewall/VPN and have web content filtering set in place.I have a user who belongs to 2 CFS policy groups that we have set up. I've double checked with Active Directory, and he is a member of both groups.
This person SHOULD have access to Job searches/ and Restaurants,but receives a "content blocked" message on his browser.It appears to me that the settings in Sonicwall are correct, as well with AD member groups.
My problem is that I want to block p2p software in my network through router, how can i do for this...
View 1 Replies View RelatedI just bought a Netgear Router WNR 2000 v3 and installed it. I got inside the router and could set up a Network Name and security key. However, I can not access the internet when I chose a security password using WPA 2, WPA-PSK + WPA 2 PSK, or WPA/WPA 2. It only accesses the internet when I chose None.( no secured ).At this time, my network is unsecured because there isn't way I can access the internet when I create a security key using the 3 options the router offers.
Note : I have tried the 3 security options creating a key number and my computer connect to the wireless network but don't access the internet. It only access the internet when I select None ( no secured )
I am new to firewalls and I am trying to make mine block specific websites but so far have had no success. Here are the settings I am using in the router's admin area:
Security > Firewall > General
Active firewall
Security > Firewall > Rules
[Code].....
I am tying to block a certain website on my WRT54GL Linksys router.I have put in MAC adresses on the Access Restrictions tab but its still not working.
View 3 Replies View Related
