I have been trying to share drives between my dekstop and laptop using a router. I have connected both PCs to the router and has made changes to the file sharing enability to both. However, when I changed the ip address to 192.168.1.1 and 192.168.1.2 respectively, the one using the ip add 192.168.1.2 could not access internet. And if I set both to default networks, my laptop failed to see the shared drive.
View 3 RepliesDon't know if in right place and not sure how to use this stuff i',m 61 and not real computer literate and don't type very well but i would like to know how to get 2 of my programs that are on my desktop and use on laptop but want to get on there with all the info in there so i don't have to retype it all again.
View 10 Replies View RelatedI have a server connected to my router with a CAT5. I usually manage the server from my laptop connected to the router via WLAN. I often need to add files to a public folder on the server so it can be dowloaded by my clients when they need them. I can access my personal laptop from the server, but I cannot access the server's files from my laptop. This is recent and used to work fine. I also cannot acces other personal computers on my network that I often connect to
View 11 Replies View RelatedMy aunt wants to use her laptop at the house and access her computer at the office. How do I do this? Laptop has windows 7 and office has Windows xp.
View 13 Replies View RelatedI got a new laptop for Christmas and set up a new router which is working fine but now I can't access the laptop via the desktop. When I click on the laptop icon on the desktop network area windows asks for a username and password which I never set up and have no idea what the are. Any step by step guide to set up my network properly so I can transfer files back and forth.
View 6 Replies View RelatedI have a laptop PC with WiFi, so I download a bunch of stuff on here. Then I have my beast/monster desktop gaming PC with a kick-ass geforce gtx 650 Ti, and an i7 processor, etc etc.... The thing it DOESN'T have is WiFi, or any internet capabilities at all (until I get a WiFi card in it or something).I have some 4 GB movies in my laptop, and so far what I been doing to transfer those movies to my desktop PC is saving it in a USB memory stick from my laptop, then taking the memory stick to the desktop PC and saving it there. I have regular Ethernet cables, would that work? What do I need to do to transfer files from my laptop to my desktop PC more efficiently and fast?
View 5 Replies View RelatedI have a Toshiba Win 7 laptop and a custom-built (JNCS) XP desktop. Both access the Internet thru a D-Link router. I would like to be able to access the working files on each computer from the other. I have changed the workgroup name on my Win 7 laptop to the same name as the workgroup on my XP desktop. I have gone thru the instructions Microsoft gives you, but they are FAR from clear because things don't happen or choices are not available that they reference.
View 7 Replies View Relatedhow to transfer files from Desktop (XP) to Laptop (XP). I am using a Netgear Wireless G router WGR614 v9
View 1 Replies View RelatedRecently my laptop, which is successfully connected to the wireless network, has failed to recognize shared folders on my desktop and the external hard drive connected to it. Laptop running 7, desktop running XP Pro. 2 days ago it was working fine. Yesterday it stopped working. I have made no changes that I can think of. All of the folders on the desktop and external drive that I want shared are set up for sharing. So, my question is, what do I need to do to again be able to read and write to these folders, especially the ones on the external hard drive. I believe the adjustment has to be made on the desktop, either in the network connections or the file sharing, but the laptop may need adjusted as well.
View 14 Replies View RelatedI can't access my wireless laptop files from my wired desktop. I have tried to set up a homegroup, and it actually worked for a week or two, but now we are unable to access the homegroup or the printer.
View 1 Replies View RelatedI have a desktop and a laptop. I can't get wireless or a wired connection to the router so I need to use my laptop to connect to the internet in the short term. I have connected to the computers using an ethernet cable. I can get to local fine but no internet.
I have attempted to bridge the two connection but when I click on resolve it says there is an IP conflict. I can't see where.
I have also tried ICS but it keeps saying there was an error when attempting to enable it although I did manage to allow it to connect at one point before it reverted back to not working it still wouldn't allow the desktop internet access. All services are running.
IP config without ICS or bridging:
Laptop: Quote:
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
[Code].....
Share the internet from my laptop to my desktop. I see that others have posted on this subject before but I have been unsuccessful so far. Maybe one of you can point out what is wrong (my guess is its something simple).I have:
*connected the 2 PCs with a Ethernet cable
*I can successfully share/transfer files between the 2 PCs
*When I found out the internet wasn't sharing, I manually changed the setting of the network adapter (IPv4) with the right ip/subnet
*I was unable to ping the two computer before I changed the settings of the network adapter.Even with being able to ping,the laptop still wouldn't let me share the internet.
*I have put everything back (all settings) that I changed to kind of start new.My laptop runs Windows 8 and my desktop runs Windows 7. [code]
The setup:Desktop PC Win 7 home to Linksys router to ModemLaptop PC Win 7 home wifi to linksys router etcTwo external HDD, USB, (Mybook) connected to the Desktop.I've been able to use the setting to make a Home network, same workgroup name, basically set it up so that I can use the laptop to access the "libraries" on my desktop like the docs, photos, etc.Now, my plan was to be able to use that laptop to access the USB HDD connected to the desktop. I tried using the fhile sharing wizard, (right clicking and "include in library" and a link does appear. I try right clicking and "share with homegroup" in the libraries tree.I get an error: "The File Sharing Wizard can't share the root of a drive"With some research, I've set the HDD sharing on (checked the "share this folder" box) and under Security set it to "everyone".When I get to the laptop, I see the link to My Book in Homegroup. But there's nothing in it.
View 2 Replies View Relatedi want to copy file from desktop to laptop.
View 4 Replies View RelatedI want to share my adsl connection that is in my laptop running xp 32bit sp2, to my desktop pc running win 7 64 bit sp1. I also have xp in another hdd in the desktop from which i have connected the laptop with firewire. But win7 does not allow firewire networking. I don't wanna buy any new hardware.
View 5 Replies View RelatedI have been trying for the past 5 hours to set up a home network between my old HP Pavilion Windows XP PC, which doesn't have a wireless router, and another PC, running windows 7, on my wireless network. I want to remotely access the files on my old, slow, Big Bertha computer, which is soo terribly, horribly slow, using my new Win7 PC. But it won't let me! The XP PC is connected via ethernet cable to my Belkin Wireless-N router, and the new HP Win7 PC is connected to my wireless network via wireless signal. The computers cannot see each other or find each other on the network. I have tried- renaming the workgroup name on both PCs to be the same as the wireless network SSID, Installing some worthless "topology" update for the XP computer, which it refused to install, saying it didn't need it, Connecting the XP computer directly to the Win7 PC via ethernet cable and trying to bridge the LAN and Wireless connections on the Win7 PC and the LAN and Windows Network connections on the XP computer
View 8 Replies View RelatedAs part of our ongoing enhancements to the online customer experience, Verizon continues to ensure security for our Internet customers. As a result of this ongoing effort, Verizon Online is making modifications to the Internet access provided to you. These modifications will occur on August 21, 2011. For security reasons, Verizon will no longer allow users to FTP their HTML files to the personal web site Verizon offers. Verizon recommends that current FTP users download their files prior to August 21, 2011 to prevent any data loss. "
View 3 Replies View RelatedI just installed the E2500 to replace my older router. With my older router I was able to share files between the different computers in my house. All I did was replace the old router with the new one and now they cant share files? I looked through the router settings and cant find anything showing firewall blocking the file and print sharing. why I cant share the files and how to allow the file sharing?
View 1 Replies View RelatedOn the main floor I have a Linksys E3000, hooked up to my ADSL modem along with laptop #1 which has all my video and photos on Picasa. Laptop is on 5ghz, running speed at 300. I'm running the E3000 in dual mode (running 2.4ghz and 5ghz at the same time.) I have 2 different network names mjames5gz and mjames24gz.
In my basement, I have a laptop running on 5ghz and an IP camera running 2.4 ghz. the signal in the basement is on the low side for both. Under Wireless network connection, I am getting around 100 on Speed vs.300 on the laptop.... The basement is fully finished so I can't run cables to the basement easily. What could I buy so I can stream videos from laptop to laptop on 5ghz. Would also be nice to have the 2.4ghz signal boosted as well
When I go upstairs, both laptop read 300 ghz and I can stream between them just fine.
I tried searching google and Cisco Home Community for this answer, but no luck. Maybe I didn't phrase my search correctly. I have an external drive connected to a mac mini which is shared on the network. When transferring folders to or from that external drive, our internet connection stops working until the transfer finishes, then comes back up. I've tested this in a variety of ways. Any transfer of data from shared folders in any combination of devices causes internet to stop working both on wired and wireless devices until the transfer is done, then they all work again. Router firmware: 1.0.03.
View 9 Replies View RelatedI recently built a new desktop computer and installed it with Windows 7 since our old xp desktop had crashed. I am now trying to setup our wireless network similar to the way it was on the old xp desktop but cannot seem to figure out how to do it on windows. The basic setup would be:
verizon usb card (internet soure) ---> Desktop ---> ethernet cable to router ---> wirless access for laptops etc.
This was fairly easy on xp. All I had to do was enable ICS on the verizon card and then run the little network setup wizard on xp and boom the router was broadcasting internet.
Now unfortunately windows 7 doesn't have that little wizard and I simply cannot figure out how to create the same setup. I enabled ICS on the verizon card but can't seem to get internet access to the router after that.
Actually I've a WiFi enabled (Nokia) Mobile phone. I also have a internet enabled USB modem (HUAWEI) & a Netgear Wireless router.I am using internet with this USB modem in my desktop PC at home.But now I want to use internet in my mobile phone. So, I bring that wireless router.
View 3 Replies View RelatedI have recently upgraded my router to a Belkin N750 DB and am having issues getting remote desktop connection working. Previously I had a Netgear router and it was working no problems at all.I have port forwarded (virtual server on Belkin) port 3389 TCP to the servers IP address.I can get Remote desktop connection to work when I am within my LAN by just typing the computers name.However when I try to connect via the IP address, as I would if I were away from home, then I get the message that says "remote desktop cannot connect for one of these reasons
1) remote access not enabled (it is because it worked before)
2) remote computer is turned off (no it isn't)
3) remote computer is no available" (yes it is cause can connect from LAN)
Turned off static IP for my server and let the router assign IP, and changed the IP address in the port forward, same, no connection.Double, triple checked my IP address, as this obviously changed when I plugged in the new router.Have updated to latest firmware for router and NIC.
I have 50GB storage on box.com and DropBox.So i just want to back up my files there.Web interface just sucks and offers no customization.Their desktop programs are only to sync, and dont do much to just upload.I dont wanna sync folders, i just want to upload files!
View 13 Replies View RelatedI was wondering what settings need to be set, and what needs to be done on both computes, i have Printer sharing up and running with no problems but i can't seem to get my mac to be detected on my main Windows 7 PC. I am able to connect to my Windows 7 PC but can't seem to get my mac to show up. Also i have connected it to the Windows 7 workgroup and still nothing.
View 2 Replies View RelatedI have a desktop computer connected by ethernet (VISTA) and a Windows7 laptop by wireless. I am trying to share folders have got the share saying no passwords and yet when I click on a folder it asks for user name and password, no passwords have been set to open either computers.
View 3 Replies View RelatedI've just got a brand new 1 TB external hard drive. I want to use this to back my computer files on. I move back to University soon and ill probably get robbed, so i was thinking, if I were to leave this new drive back home on my old machine, could i put files onto it over the internet? Of course id have to make sure the machine at home is on but thats no problem.
View 2 Replies View RelatedI have a small office network of 6 computers. I have just added the 6th computer running windows 7 home premium to the network and having a few problems. We are running sage accounts system and i cant connect to the main computer that is acting as the hub which runs of windows xp to acces the sage data.The main computer is visible on the network along with all other computers on the network but i cannot connect to it. when i click on it a box appears titles 'windows security' it asks me to 'enter network password' and says below 'enter your network password to connect to cornwall-31aae0' which is the name for the hub pc.
I type in the username and password for that computer and press ok and nothing happens the box flashes and remains the same as if stuck in a continual loop. i have tried various combinations of usernames and passwords including using the computer name as a username and none work.i have played around with the settings changing workgroups and network names etc to match the hub pc and none work either. i have disabled and enabled password protected sharing etc and none of this works either. i seem to have tried everything and also tried matching the settings so that it is the same to another pc on the network running windows 7 also but still makes no difference.
My new computer can't upload any of my files like in facebook and yahoo. I try some speed test, download is okay but upload is not. I turned off my firewall and nothing happens.
here's my ipconfig /all
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
D:WINDOWS>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : jethron
Primary Dns Suffix . . . . . . . :
[code]....
I need to do a backup on our laptop prior to beginning the malware removal process. I need to move 22GB+. There is plenty of room on our desktop to store the files.Would it be best to use file sharing between the 2 PCs? They are both USB connected to the same router. Or, is it possible to transfer the files by connecting them directly to each other via USB?
View 5 Replies View Related0ave a WRT110 that provides the hub between an xp, vista and a windows 7 machine but I can't seem to find a way to share files between them.Mapping a network drive, making sure all permissions are set on all machines Es there something like a service that isn't started that isn't started? and is it not started on all systems. I'm going nuts trying to prepare for the up coming school season so that all my kids can get what they need from their individual bedrooms (no cheating that way).
View 1 Replies View RelatedI am having trouble with my network, specifically printer and file sharing. I have 3 computers, (2 wired, 1 wireless) The network hasn't worked for quite a while. I just hooked up a new (wired) computer and it won't work on the network either. With the wireless computer, if I click on "view workgroup computers" I can see all the computers but cannot access them. With the 2 wired computers, I always get the message, "MSHOME is not accessible," etc. Funny thing is, the network used to work. I don't know what happened to it. I just formatted this new wired computer and loaded XP on it, used the network setup wizard, but keep getting the "not accessible" message. However, last month, I was working on my mom's computer and I put it on my network (hardwired). I had just formatted it and put XP on it and with that computer, I was able to access the laptop computer through the network.I have tried several times to create a new network by using the network setup wizard but it keeps saying that MSHOME is unavailable.I am using XP service pack 3 on all computers, Zone Alarm on 2 of the computers (the router and the new computer), and Windows Firewall on the other wired computer. I can access the Internet with all 3 computers.
View 18 Replies View RelatedI have IMG burn but for some reason, I can't burn the AVI file to a DVD. It doesn't see the file.
View 5 Replies View Related