Wired Router Isn't Found?
Feb 17, 2011
Well, I have a problem with my router, I just did a fresh install of WinXP Home Edition but my wired router wont come threw, I looked at my connections and there isn't a Local Area Connection. I had this problem with my other XP computer, but it fixed after a driver scan and fix by Driver Robot. But that was when I could get online with wireless. My wireless connection capabilities broke after 4+ years of running. I ran a offline mode of Driver Robot,
View 6 Replies
ADVERTISEMENT
Jan 23, 2008
telnet/ssh sessions time out after 30 minutes of in-activity This only happens in the case of a server that is setup behind the firewall, and of course port forwarding is used. If one unchecks the radio button for the enable firewall the sessions do not timeout at all. This is very reproducable in all recent (1.3.9) versions of RV042 and RV082 routers.
View 2 Replies
View Related
Sep 23, 2012
I purchased and set-up the EA4500 on Thursday. Friday my ISP (Charter) was out and worked on connection for over 2 hours due to slowness issues. Connected directly to modem I get normal ping times on whichever computer is connected. When I get the computer connected by the router (hard wired) I get very long ping responses up to 900ms. They are all over the place 30ms (I can live with that), up to the 900's. I contacted Linksys support last night, who had me update to the cloud firmware and change MT U to 1300, have not noticed a difference. I did end up doing a hard reset on the router last night after I lost tech support. We were disconnected with router rebooted, and I didn't have the patience to connect again last night.
It was so slow on my work computer, a pint to yahoo timed out. The computers connecting to router are
XP SP3 (mine)
Win 7 Home (IPV6 turned off)
Work laptop that uses VPN and VOIP
View 5 Replies
View Related
Sep 19, 2011
I have an e2000 wireless router and have several devices connected by ethernet cable including private data on an external hard drive. I am planning to allow a tenant in another building connect via an ethernet cable connected to my router. Can I limit that computer (tenant's computer) from accessing all other devices connected by ethernet cable to my router? I know can password protect wireless access and limit access to the internet that way -- but my question is specifically to connections by ethernet cable.
View 1 Replies
View Related
Oct 11, 2012
My E4200 router no longer accepts any WIRED connections. I can connect from the modem to the computer and everything works as expected. I can connect other computers wirelessly to the router. I cannot connect any laptops WIRED to the router. Nothing has changed on the systems to restrict internet access. There is something wrong with the router and the WIRED ports. I tried going through the troubleshooting on this site but it was of little to no assistance. The Cisco Connect utility doesn't appear to accomplish anything either. My guess is because I cannot connect to the WIRED ports on the router to connect to the internet to allow for whatever troubleshooting that needs to be done.
View 2 Replies
View Related
Sep 14, 2011
I have a home network with a wired BEFSR41 that, for a variety of reasons, MUST be manually IP configured (DHCP off). All computers and other devices connected to it are manually IP configured. I desire to add a device that cannot be manually configured, and needs DHCP. I therefore need to daisy-chain two routers with the second one DHCP on (and manual IP connection to the main network). The new device needs two-way internet access, but doesn't care if it sees any other current network devices. I've tried several configurations, none seem to work.
View 3 Replies
View Related
Apr 11, 2012
I have a WAP54G in my basement shop, wired to our main router upstairs, which is a Linksys BEFSR81. I'm not sure if this is an issue with the WAP or the router.
I only use the laptop computer in the shop every couple of days, but I leave the laptop plugged in and on most of the time. I used to have the power settings such that it didn't power down completely even after a long time. With that setup, if i didn't use the computer for several days, it would find that the connection to the router had died. The wireless link would report that it had a solid connection, but I couldn't connect to anything. Power cycling the WAP always fixed this.
Recently, I decided to save some wear & tear on the laptop drive, and adjusted the power settings to go to standby after a couple of hours. Now, it seems I can't even go one day without losing my connection.
I am running the latest frimware in the WAP, and the router is version 3.1. I can't check the firmware version on the router at the moment, because the web interface is giving me a blank screen. I know from past experience that I will have to power cycle it to get it to talk to me again.
In any event, it seems like the router connection to the WAP is timing out. I set the router "client lease time" up to 10000 a while back when I first had this problem, but that is clearly not doing the trick.
View 3 Replies
View Related
Jun 16, 2011
I have an old BEFSR41 ver. 2 wired outer that I'd like to use with a motorola modem/router as a hub. Is this doable?
View 2 Replies
View Related
Oct 17, 2012
I purchased an ea6500 to replace a ea4500 about a week ago and in summary, I will be exercising the 30 return policy at the retailer, and probably never buy a cisco router again.not connected to router, and router not found messages appear alot.
Internet connectivity stops, unable to log into ea6500 completely frozen, but still routes to other LAN devices (like the SPI firewall i have the monitors network usage). then ranomdly comes back, and goes. can switch AP, and other will work, non-stop. is DEFINATELY ea6500.
sometimes I have to power cycle 6-7 times before it will maintain a wireless network that doesnt drop every 15-30 seconds.otherwise when i connect to the wireless, it log on for 10-15 seconds, then drops off and "Attempts" to reconnect.often stalls out, and crashs when USB external drive is connected at first. (again, power cycle 6-7 times to get to work properly)windows 7, and OS X 10.8 on 3 differant machines.
seems to connect better on the windows machines, and sometimes connecting with a windows machine allows apple ones to connect properly after... weird (OS X bugging up DHCP server? bacisally, when it goes down. it can take an hour to get my wireless back up, power cycle, and then see if its working proplerly, it usually isn't, try again... etc.
View 5 Replies
View Related
Jun 20, 2011
i have a SMC8014WG-SI Router and its gateway is 192.168.0.1 but when i type it in the router doesn't appear at all , just says that the page cannot be found. i like portforwarding and need to be able to login the router to do so.
View 9 Replies
View Related
Nov 15, 2012
I am using a 2851 router in mpls network. We had a power shut down activity recently and post to that i could not find any logs in the router.
View 4 Replies
View Related
Feb 18, 2012
We are monitoring everyday C-2500 router, the CRC and input error are increasing day by day.This are current readings as observed on 18 Feb.
C-2500-R1#sh int s0
Serial0 is up, line protocol is up
Hardware is HD64570
[Code].....
View 1 Replies
View Related
Jan 13, 2011
I recently got a second hand Advent Roma 2000, which runs with Windows 7. After a while I managed to configure it to allow my T-Mobile internet dongle to connect. However, we recently got BT put in and I cannot find the wireless router [BT HomeHub 2.0].Now, at first I thought maybe the wireless detection on the router was faulty, but I checked my 360's wireless connection and that has connected with no problems.
View 13 Replies
View Related
Oct 14, 2011
I want connect an external HDD 320GB FAT32 2,5" but E4200 dont found it. USB Stick with 4GB is working.E4200 have latest Firmware.
View 1 Replies
View Related
Jun 4, 2012
I have a series of problems I think are due to my 310N. First, with Facebook, I will suddenly be redirected to a248.e.akamai.net., which Chrome flags as an SSL error. Second, with (and only with) NYTimes.com, I will get "file not found" (and no numerical error) when trying to retrieve an article (via Chrome). AND, again only with NYTimes.com, I will get high-bit ascii characters in headlines. For other sites, I will get "invalid url" messages on web pages. If I unplug the modem and let it rest for 30 seconds, that seems to solve the problem. I have to do this at least once a day.
More than once a day. I don't think it's a 310N problem; but I've asked about this on other forums and got no useful reply. Previously I had similar problems with my 160 router. So, it's not the router. HOWEVER, shutting it off works with lot of the problems. Right now, after shutting off the router and turning it back on, now Facebook just doesn't come up at all. No error, just don't come up. I can ping it.
View 4 Replies
View Related
Aug 1, 2011
I keep getting this error every few days and I have to restart my router in order to gain access back to the web utility. I reflashed the fw a second time with no success. I have read about this trip 30 reset but have had no luck finding a post which describes how to go about that method.
View 5 Replies
View Related
Jan 16, 2012
I get a timeout in Cisco Connect when I select "Connect USB drive". Also there is no detection through the router website. The hard drive works fine when I hook it up via USB. It's NTFS formatted. Is there any other way to make the router detect the drive? (It does recognize a USB stick, so it's no hardware issue on that side)
View 5 Replies
View Related
Jan 26, 2012
I have a secondary router (E1200) on my home network, connected LAN to LAN. I use it mainly for wired connections, and it does work for that. But when I try to access this router through the IP address, I get a page that says only "ACT_IDLE". Occasionally, I am able to access, but I've found no pattern to when the router is accessible and when it is not...mostly not.
View 1 Replies
View Related
Sep 27, 2011
I have used wireless routers in the past...but have just purchased a Cisco E2500. When attempting to set it up using the CD I am asked to assign name + password.....I do this and but the ?? is unable to find the router. This despite the fact that it is 8 ft. away and showing up with 5 bars on my networks available display. When I attempt to connect without going thru the setup it asks me for the password which is part of the setup process..
View 3 Replies
View Related
Jun 15, 2012
I thought I would leave a message on a problem. I did two chats to the support desk and this was not brought up and it is obvious. I just installed the 4200v2 as a replacement for a NetGear. I bought for the n performance and the USB for a shared disk/media file server. I connected a640G Western Digital My Book to the USB. I was able to see the drive in the asp interface of the router, but I kept getting the "error code: 0x80070035 network path not found" message. My computer is a 6 month old HP with Windows 7 running Bitdefender Internet. I found I could get to the drive from my wife's Toshiba (only used for browsing, so minimal security), so I thought it was a firewall issue (also what Cisco said). After doing some Internet mining, I found that the issue is the Netbios setting in IPv4. My PC had the setting Default, which requires the DHCP server to provide the setting and apparently this was not set by the 4200. Without Netbios the disk cannot be mapped. Changing this to NetBios "enabled" solved the problem. This can be reached by going into the Control panel:Network and Sharing Center. Click on the connection (either local area or wireless), then open the properties, click on the TCPv4, Click properties, then advanced. Go to the Win tab and select Netbios enabled.
View 1 Replies
View Related
Jul 11, 2011
it says no network found. It worked fine but not now.
View 1 Replies
View Related
Apr 19, 2009
BEFSR81 v3.0.I selecting Enabled UPnP and now I cannot access the router. When I enter the default admin for the password in the Authentication Required screen. I get the following screen: 401 Authorization RequiredThis server could not verify that you are authorized to access. Either you supplied the wrong credentials(e.g., bad password), or your browser doesn't understand how to supply the credentials required.I didn't enter anything new into the username or password fields.
View 5 Replies
View Related
Jan 14, 2011
Have an Actiontec GT704 feeding DSL into a BEFSR41 which is connected to a WRT610N. Can access internet, modem and wired router from desktop. Can access wireless router from laptop. Cannot access internet from laptop or wireless router from desktop. Changed ip address for wireless router to 192.168.2.1 so no conflict with modem or wired router.
View 3 Replies
View Related
May 9, 2011
How to connect two PCs and one DSL router to get on the internet?I am getting IP conflict error on the PC. I can only connect one PC at a time to get to internet.
View 1 Replies
View Related
Jun 23, 2012
I have configured 2 RV042 VPN with different ISP. Tunnel connected successfully and i can ping each other router but i can access clients which are connected to router. I have added rules also in firewall.
View 1 Replies
View Related
Nov 10, 2011
I've installed a RV042 and my terminals cant even ping each other. They have Internet, but they cannot ping each other, or open network shares. It is not a dns problem becouse it does not work with the IP.
View 1 Replies
View Related
Mar 16, 2011
I need properly configuring the RVS4000 device. I need all devices to be on the same subnet (192.168.0.x) and if I am drawing this out correctly in my head I would perform the following:Connect LAN port of RVS4000 to LAN port of the switch and statically assign a LAN IP of 192.168.0.251 to the RVS4000Switch is connected to LAN port of the 2Wire (192.168.0.254)Change operating mode from Gateway to Router in the RVS4000 Connections to the RVS4000 will obtain a DHCP IP address from the 2Wire that's upstream.As the WAN port of the RVS4000 would be unused, will it still answer requests for a VPN connection assuming the proper ports are forwarded to it?
View 1 Replies
View Related
Nov 28, 2011
I just bought a new Linksys E4200, and connected it about an hour ago. I have a 30Mbps internet connection when connected direct to the modem, but when connected wired to the router, max speeds are 8Mbps.
View 2 Replies
View Related
Jun 7, 2011
I have a problem with the router Linksys RV042, I made a backup of it that contains a file with the extention .exp Now we have buy a new Rv042 made by cisco and the backup file is .config the question is how I convert the .exp file to a .config file so I can Restore the backup in to the new router?
View 1 Replies
View Related
Mar 2, 2011
can i use one of my hard wired router ports to plug in a wireless router and use them both?
View 1 Replies
View Related
May 7, 2012
Is it possible to run the EA4500 as a Wired only Gigabit router? To do this do I just go into the settings and disable both the 2.4 and 5 channels or do I have to do something else?
View 2 Replies
View Related
Feb 7, 2011
I have a BEFSR41 that has been flawless to date but it is version 1 (I think). I have gigabit nics on all PCs but I am wondering if the old version 1 is only capable of 10mbps throughput. If that is the case then it may explain why I can get up to 20mbps download speeds off the modem and under 10mbps off the router. The router has the latest firmware and otherwise no problems.
View 2 Replies
View Related
Jan 2, 2011
if no route is found to the destination in wireless networks what will happen to the data packets that are being transfered. will tey be lost or ll be queued in the intermediate nodes.
View 3 Replies
View Related
