Wireless Network Stuck On Acquiring Network Address And Cannot Renew IP
Jul 5, 2011
A few days ago the internet on my desktop was working fine. now it has the 'limited or no connectivity' sign on it and i have done a few things to try and fix this. I started by trying a simple repair. it comes up with 'the following action can not be completed: Renewing your IP address' This lead me to try and restart my PC and router with no luck.
I then decided to look a bit further into it and went ito CMD and flushed the DNS. i then did 'ipconfig /release' which generated the response 'IP address for adapter wireless connection 9 has allready been released'. I then did 'ipconfig /renew' to which it generated an interestin response:
'An error occurred while renewing interface wireless network connection 9 : The RPC server is unavailable'
I have made sure my DNS client is on automatic, alont with my RPC (this was uneditable). Its not a router problem as i have had multiple devices connected before and my laptop is working just fine connecting wirelessly.
View 14 Replies
ADVERTISEMENT
Aug 6, 2011
i recently bought a dell mini laptop and i am already encountering problems with my wireless. i am on the laptop now, but i connected it via ethernet, and that is apparently working. whenever i hit repair it gets stuck at acquiring ip address.
View 4 Replies
View Related
Oct 14, 2011
I'm running a Windows XP Dell laptop. A few days ago I completely reformatted the computer because it was just starting to run slow. I reinstalled Windows from the factory CD and downloaded the latest drivers from Dell's website. Now suddenly, after the reformat, my network connection gets stuck on "Acquiring network address." Running ipconfig shows either 0.0.0.0 or a blank space for each field.Other laptops in the house work fine.I did discover that I can get it to say "Connected" if I go into the advanced settings and manually enter an IP address and use the subnet and gateway from my desktop's ipconfig results. The problem is that I can't actually get on the internet. It just says it's "connected."
View 14 Replies
View Related
Apr 9, 2011
wireless stuck on acquiring network address, very good connection, dell latitude d410
View 5 Replies
View Related
Jul 16, 2011
Recently during the power failure my PC shut down abruptly since since then it is not connecting to the network. I have a cable broadband internet, I am using Ethernet wired connection, Intel PRO/100 VE. The Ethernet jack is good as I have confirmed using my laptop. The network connection gets stuck in acquiring network address state. I tried restoring the system to earlier date but it fails to restore. I installed new Intel drives, deleted ethernet adapter from device manager, reinstalled TCP/IP but no luck.. I am using XP SP3 on P4 machine,
View 10 Replies
View Related
Jan 19, 2011
I was connected on wifi and all of a sudden I got disconnected and hasn't been able to connect since. This happened Sunday night and it's now Thursday. I got stuck on acquiring network address. I've been using the same wifi connection for about 7 months now and this never happened before.
All the other laptops at home (Mac and XP) could connect except me. I tried to google over my phone but still wasn't able to fix it.
This is what the ipconfig says:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
[Code].....
View 5 Replies
View Related
Mar 28, 2012
My Dell was running very slow, so I used the disks that came with the computer to reinstall Windows XP. After doing this, it wasn't detecting our wireless network. I went through on the drivers disk and installed the drivers in order according to Dell's specifications. It still wouldn't work, so I went to the dell website from another computer, and downloaded the drivers that pertained to the network. Now it is recognizing the network, I was able to enter my key, but it won't stop "acquiring network address". When I do the ipconfig /all, it looks like there is no IP address:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsUser>ipconfig /all
[Code].....
View 14 Replies
View Related
Sep 2, 2012
My computer was recently cured of a damaged processor and a viral infestation, and it seems to be working properly again, however,I've been unable to connect to my network because the connection gets stuck on "acquiring network address".I am running Windows XP service pack 3 and the network device that isn't connecting is a Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC.
View 2 Replies
View Related
Oct 23, 2011
I connect to the internet using a wireless USB. I woke up this morning and the internet showed that it was connected yet it wouldn't allow me to open the web or anything such as "msngr" I took the wireless card out for a couple minutes and then tried. That didnt do anything but say acquiring network address. I am not that knowledgeable when it comes to computers but these are the things that I have tried so far :
I went into properties and configure USB . . Made sure that the SSID said "Any" I Also tried going into properties and tcp/IP internet protocol and made sure it was on obtain IP address automatically . Hmm I tried. RUN>SERVICES> to make sure that the DHCP and TCP were started and on Automatic. I then tried system restore :- (went back about 2 weeks) . . Nothing. I then tried RUN>CMD>IPCONFIG/RELEASE *ENTER* IPCONFIG/RENEW *ENTER*.
when I did that it showed wireless network is now connected, yet back to ground zero. It wont let me browse. Its not really connected. When I look at the connection status, signal strenghth is good. Packets sent & received are good. I feel like there is just something little that. I am not getting, that is making this happen.
View 12 Replies
View Related
Dec 27, 2011
i have a dell inspiron mini 10 and i put windows xp pro sp2 on it and got all the neccesary drivers for it the problem with it is that it detects my router and everything but when it tries to connect it gets "stuck" on aquiring network adress i tried the winsock fix and everything but nothing seems to work
View 1 Replies
View Related
Feb 9, 2011
I have a laptop HP Mini 110 1025DX with Windows XP sp3 Home Edition and up to January,31 his wifi was ok. Since February,1 my wifi keep on giving message âAcquiring Network Address on my work. I tried several possible solutions without success. My wireless card is Broadcom 802.11 b/g WLAN. His drive is updated. In my work, haven´t change none parameters from the wireless. What I need to do ?
View 2 Replies
View Related
May 20, 2012
... and made a fundamental mistake of uninstalling adapters hastily without looking into it. Now when I try to re-install the adapters, I'm running into difficulties. Specifically, I don't have the CD-ROM I originally must have used, and the following message is popping up: "Files Needed - The file 'atl02_2k.sys' on Atlansic Fast Ethernet Adapter Installation Disk is needed. Type the path where the file is located and then click OK." Unfortunately, I don't have any idea if there is a path where this is located, so installation cannot complete.
The reason I took this option to begin with was that the wireless connection on my laptop [Asus, Windows XP] was acquiring network address without ever connecting fully to the internet. I had previously tried another of other methods, such as manually entering an IP address, to no avail.
View 7 Replies
View Related
Mar 6, 2012
I have fitted a thomson router to my desktop coputer using an ethernet cable and all is working fine. My Sony Vaio laptop recognises the wireless connection but fails to connect at the acquiring network address. I have been into the properties section of the network connection page and am only allowed 8 characters for the network key. But the Network key on the bottom of the modem is longer than 8 digits.
View 1 Replies
View Related
Oct 5, 2009
I have a Dell Inspiron Mini 10 Netbook, when I'm trying to connect to a wireless network I get the message 'Acquring Network Address'. I can connect fine using a wired connection, but using the Wirless 1397 WLAN Mini card it won't connect.
I tried to log a call with Dell as the machine is only 2 months old and someone remotely connected and said it was a software fault not hardware and they would charge me to resolve the issue. I found that hard to swallow so thought I would try here.
View 4 Replies
View Related
Dec 13, 2011
my daughter accessed a website and got the XP Security 2012 virus on her laptop. Then she went on my pc and did the same thing. Fortunately, it appears that I have gotten both systems cleaned up. At this point my system seems to be fully functional, but her laptop is another story. It is working ok, except that we cannot connect to the internet/network with it. It seems to be stuck on the "acquiring network address" loop. I am not super computer savvy, but I have looked at the device manager for issues (found none).
View 1 Replies
View Related
Sep 11, 2011
I have E4200 with fixed ip 192.168.1.2, DHCP off connected through LAN ports to FIOS ActionTec as 192.168.1.1. When connecting through wireless network off the E4200, I can obtain and connect fine under Guest network and WEP security, but for any other security setting, WPA, WPA2, Mixed mode, etc. I get the message "Aquiring network address" forever, and I never get a connection.
View 1 Replies
View Related
Oct 31, 2011
I recently started a thread called 'Network Controller Not Found (clueless!)' which highlighted a problem I had with a RaLink Wireless Adapter and the system not locating the correct driver. It's now found the Ralink Wireless Turbo 802.11g driver and wireless connectivity is live. However I have a new problem with connecting to the BT Homehub. BT Fon and Openzone connections are fine, and it finds my BT homehub by name, but on clicking 'connect' I have a constant 'acquiring network address' over the icon in the system tray. I've seen this problem mentioned before, but am completely new to setting up wireless connections, so don't understand much of the terminology at all! Even when trying to reinstall from CD, the homehub is not indentified, resorting to wired setup. I've looked at other threads but just don't know where to begin. I've followed instructions and reset the homehub, but nothing. The IP address values are 0, is thing something to address (no pun intended)?
Here is a rundown of a wireless networking test.
Windows IP Configuration
Host Name . . . . . . . . . . . . : Air
Primary Dns Suffix . . . . . . . :
[Code]......
View 2 Replies
View Related
Jan 23, 2012
I have a Asus EeePC SeaShell 1005HA-H and i have a LINKSY ROUTER in my home. I recently been having problems with my wireless internet. I know it isnt the router because i have went to my boyfriends house and my laptop usually automatically connects to his internet and the same message continues to show up "Acquiring Network Address message". I try to repair the network and a error comes up. Then i went to check the firewall settings and the firewall is tured off.
View 1 Replies
View Related
May 23, 2012
Have a computer running windows xp. Whenever I plug in my internet cable it says 'Acquiring Network Address'. I have left it for over and hour but it still says the same thing. I have connected other computers to the router with the same cable and they work perfectly. I have also tried channging the linkspeed for the network connection, renewing my ip address, repairing the network connection and disabling and enabling the connection.
View 2 Replies
View Related
Nov 27, 2011
so ive tried just about everything, installing/uninstalling drivers, restarting stuff in cmd, but it still will NOT acquire [code]
View 15 Replies
View Related
Feb 28, 2011
I'm working on a friends laptop that used to connect wirelessly to their network no problem, and all of a sudden it would no longer connect at all. It a 5 year old Gateway laptop running Windows XP Media Center. It just hangs at "Acquiring network access" and never connects. I'm pretty sure it's their network because it works on my home network perfectly, connects and stays connected.
Can you give me some pointers to do to the laptop and/or the network? I normally would start fresh with the wireless network, but they have a bundle package of AT&T (internet, phone & TV all-in-one) so the router is branded AT&T and don't want to mess any of that up.
View 3 Replies
View Related
May 12, 2012
Recently, I am having an issue with my LAN connection. After I boot up, I get the "two computer" icon in my system tray that stays active. When I mouse over it, it says "Local Area Network Speed 100 Mbps Status - Acquiring Network Address"However, I am connected to the internet and there seems to be no connectivity problems. And it has an IP address: 192.168.1.66 This "acquiring network address" will persist forever, (although sometimes it will quit). If I right-click and do repair, the problem disappears immediately.I am running Win XP SP3 and am connected by ethernet cable to an ATT-U-verse Gateway.For what it's worth, Windows takes a very long time to boot up -- it takes a while for the icon to appear, and then the boot process completes.
View 1 Replies
View Related
Nov 8, 2011
I have a Dell Latitude D620 and my wireless isn't working. It worked before but then I had a malware/spyware on my computer that blocked my wifi and when I managed to get the program off, my wifi still wouldn't connect. It's not the wireless card because I bought an external one and it did the same thing. It's not my router because my other computer connects to the internet.
View 1 Replies
View Related
Jun 18, 2012
I an on this form from my cell right now.. so, the computer i want to get Online with is a desktop and i have been days with this problem.
View 14 Replies
View Related
Nov 6, 2011
I use this computer at work and at home on wireless network. At work it has been fine but at home I sometimes get the "Limited or no conectivity" message. I have not tried any solutions yet as it usually goes away if I reboot and if that does not do it taking it to work (where it works FINE) and then back home ususlly fixes the problem. Last night I was able to go online and google something but when I clicked on a link it did nothing for several minutes and THEN told me I had 'Limited or no conectivity' where just a few minutes before I was 'connected' signal strength 'excellent'. When I click on 'repair connection' it tells me it can not renew IP address.As stated I have not tried anything, changed anything, and there is no one else using computers on the network
View 1 Replies
View Related
Aug 22, 2011
I have not been able to connect to the wireless connection. I have had some trouble with this in the past when booting up, but usually I can manually select our wireless network on my own and it works fine. But since last week, I have not been able to connect at all. On the Wireless Connection Status, it showed Limited or No connectivity. I tried the repair button in the Wireless Network Connection Status Support tab, and that told me that I cannot connect because I could not renew my IP address.I have tried a few different things, such as doing an ipconfig /release and /renew. Schools coming up, and itd be nice to have internet access on the laptop as well as our desktop.
View 1 Replies
View Related
Jan 9, 2011
Can't connect to my own Wireless Network? My Gateway Laptop network key is stuck with an old password? It seems to accept new password but never does connect, and when I retry, there's the old password back again, which I don't remember and was for the other modem. Have tried deleting the Realtec Wireless Adapter and reinstalling but the old password still returns? Tried renaming Wireless Network but old password still returns? Tried accessing Registry with no luck. Only way the Laptop can access is to leave Wireless Network Open/Unsecured, but that's not an option.
View 4 Replies
View Related
Jul 24, 2012
My work wireless network is stuck on identifying. It works for ALL other computers in the office. It works when I am wired to the router. I've tried most things that forums tell me to do. Below is the IP config. It is only this network and one other. Both are provided by verizon if that makes any difference.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersShaun>ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection 2:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
[code]....
View 4 Replies
View Related
May 13, 2011
I'm using a 2wire 2701HG-B wireless router/dsl modem combo. My computer is a Win 7 Ultimate 64bit. The router/modem has been reliable for the last 2 years.. hardly ever needing a reset, reboot, or anything. Then all of a sudden my wifi network didn't show up anymore. I did a reboot, nothing. Kind of weird so I got on the phone with AT&T and they walked me through some simple stuff and they determined it's either the router or my computer. Well I know it's not the computer, I can use the mobile hotspot on my android phone and it gets on just fine.All of the lights on the router are green, AT&T showed that all the tests show the internet connection is working. Since the router is not sending out a wifi signal anymore, I had to plug the ethernet cable in. The system recognizes a connection but says it isn't connected because it is a "public" connection. Additionally, if I go to network connections with the cable plugged in, I can see my DirecTV DVR is showing on the network (because it is connected to the router via ethernet too). So it isn't broadcasting wifi, I can see my DVR over the network in windows, but I can't get the IP renewed.
Here is the ipconfig /all print:
Windows IP Configuration
Host Name . . . . . . . . . . . . : thindery-laptop
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....
When I try to do an ipconfig /renew, it says this:Windows IP Configuration An error occurred while renewing interface Local Area Connection : The operation was canceled by the user.An error occurred while releasing interface Loopback Pseudo-Interface 1 : The system cannot find the file specified.The AT&T rep said I may need a new modem and router. It seems weird because it worked fine one night, then the next night all of a sudden it didn't work.
View 5 Replies
View Related
Dec 1, 2011
After an indeterminate period my E4200 (firmware version 1.0.03) stops renewing the Internet IP address. This happens in both router mode and bridge mode.In router mode the E4200 is set for DHCP and connected to the cable modem, in bridge mode it is connected to a Dell switch with DHCP being provided by my Win2008R2 server.It appears that the device stops recognizing the existence of the Internet port - no lights come on when a cable is plugged in - whether connected to the cable modem or my Dell switch. Plugging the same cable into one of the 4 lan ports and that port lights up immediately (i.e. it is not a patch cable problem).If the E4200 is left switched off for some time (possibly days) it will work properly again for a while.
View 6 Replies
View Related
Mar 25, 2011
My laptop is configured with an alternative configuration with static IP address for my network, normal TCP/IP settings are set to automatically, yet every time i boot up my laptop it struggles to resolve the IP address, leaving a Yellow triangle over the Network icon in the System tray, the IP address eventually will resolve it self allowing internet connect, I Can't seem workout what is slowing procoess down, any applications like web browser, updates, become non-responsive until the connection is fully established.
View 5 Replies
View Related
Jun 9, 2011
I have a dell laptop. It will pick up and connect to the neighbors wifi. But when trying to connect to mine it will not acquire a network address. It continuously searches but says 0.0.0... it says the signal is excellent but will just not acquire the ip address. By the way, cell phones with Wifi connect to this network with no problems.
View 2 Replies
View Related
Jan 7, 2013
I have just moved my desktop to another house and now I cannot access the Internet. I have a USB adapter which has connected to the hub and has an excellent connection but it keeps trying to aquire network address. Then stops and starts again.
[code]...
View 14 Replies
View Related
