Wireless :: Computer Will Not Connect To Internet
Jul 19, 2011My computer sees the wireless modem, and i have signal. But when i open up internet explorer will not connect.
View 1 RepliesMy computer sees the wireless modem, and i have signal. But when i open up internet explorer will not connect.
View 1 RepliesI have a HP pavilion p6736f-b. It has wireless capability. It has wireless lan 802.11b/g/n. I know personal it can connect to the internet because I have done it before. Now when i try to connect to the internet it shows that no networks are available. This problems goes away when I use my wireless adapter and it can find my network name fine and I can connect to the internet. I want to be able to use my computer wireless without any usbs since it goes faster and I also use plenty of usb so I dont have the ability to always use a usb for my wireless adapter. I think the problem might be connected to me connecting my xbox 360 manually setting the ip address default gateway etc.
View 13 Replies View RelatedSo my old dell computer cannot connect to wireless internet, so it is connected to a Netgear internet bridge box. The other bridge box is in the basement where it is connect to the modem. I believe the location of the other box is almost directly below were my computer stand (and bridge box) used to be.I recently I moved it to different corner of my house that is about 15 feet further than the previous location. Now the wired internet speed is almost unbearable and inconsistent. The wireless speed is the same, but wired is really bad. I believe it is because the bridge boxes are further away from each other.I've tried unplugging and replugging, resetting, and etc.I would really like to know how I can fix this without moving the computer back since the furniture is in a really nice place and the computer would ruin the look.
View 5 Replies View Relatedi have problem with internet notconnected router
View 1 Replies View Relatedaptop ,i just buy wireless netgear router for wireless net range but it does not work .its saw me the router acess point but some how my internet not connecting . its connecting with linsys but not with my router. its something which i can do ? am thinking of security system on the netgear properties
View 1 Replies View Relatedwhy my computer cannot connect to wifi but can only connect to ethernet and broadband only?
View 2 Replies View RelatedI want to connect to the internet with a wireless connection on a new computer. When I connect I am asked the security code that I do not know where to look.
View 1 Replies View Relatedi went to device manager and looked at the network devices and there is a yellow sign with a ! in it next t broadcom 801.11n network adapter and under that there is realtek RTL8168C(P)/8111C(P), but is fine i think.
View 1 Replies View RelatedI am having trouble keeping my computer connected to the internet...even though it says my signal strength from my wireless internet is excellent. every time i get online i put in my url and it loads the page but if i click on anything on that page it asks me to connect again even though my computer says im still connected.
View 1 Replies View RelatedI have a Cisco E1200, I am wanting it to connect to the net using Etisalat ISP. The computer will talk to the router and all the settings look correct but it will not connect to the internet.The router did a software upgrade that it deemed successful.
View 9 Replies View RelatedI am unable to connect to the internet with my XP computer. I am running Apple Air Port as my router. The wireless network has an iMac, an IBM Think Pad(XP SP2)and a Dell XPS 410 (XP SP2). I am using WPA security and the Dell will not connect while the other two computers always connect. My wireless network is broadcasting, but when I try to connect after entering the proper key, it attempts to connect but appears to time out and displays the available wireless network. I tried reinstalling the drivers, but no success. Device Manager says the card is working and enabled.
View 5 Replies View RelatedMy WRT54G2 v1 does not automatically connect to the internet on computer start-up. The computer will say "Connected, No Internet Access" In order to fix it I have to unplug the router and then plug it back in. This happens to any computer that tries to get online from a cold start-up. The router must always be unplugged, then plugged back in, then it will have internet access (and will generally maintain it throughout the session and even if the computer is restarted, i.e. warm boot). I have downloaded the latest firmware uprade.
View 9 Replies View RelatedSet up wireless internet with this computer. After going through set up wizard my computer would not fully connect to wireless. It is connected to the network but the internet does not go through. When diagnosing the problem windows says "A problem with your network router or broadband modem might be preventing an internet connection. My husbands computer and phone have no problem connecting. My computer says the wireless network adapter is working properly and I seem to have no trouble connecting to other wireless connections.
View 4 Replies View RelatedI am with Virgin media (UK) and have the 20mbps fiber optic connection. My area has recently been having problems with the broadband and Virgin has recently fixed these problems. However I used to get around 19mbps now that the problem is fixed my computer which is wired to the router gets about 0.4mbps downstream... However the 5 wireless computers all get 16mbps which is pretty good for them. Windows tells me that its a firewall issue and I currently can't use two programs, spotify and steam. They both have firewall issues, even if I turn off my firewall which is the windows one. I also have avast, and when I turn that off, still no good. I used OpenDNS, stopped using that flushed my DNS, that didnt work. I tried to optimize my computer settings, by changing various values in Regedit.All of this has done nothing. I should add that I have recently re-installed Windows 7 so on this fresh install it has never had decent internet speed. Which I thought was weird.. I have basically had these problems since the fresh install. All of my drivers are up to date.
View 10 Replies View RelatedSo I bought a new computer an Acer AX34703-ESTOP I don't know if that sais anything but anyways I was trying to connect to my internet which who would be listed and works fine on all my other products but my internet has a password and when I would click on it while listed it would say : Windows Was unable to connect to ..... Network and it would'nt even ask for my password
View 1 Replies View RelatedI am setting up two identical workstations at the company I work for. They are both brand new HP computers running Windows 7 64 bit. I set up one computer fine and added it to our domain. I tried connected the second computer and I can add it to the domain but for some reason it says "No Internet Access". I can ping our server and anything else on the network, but any website I try won't come up.
Most of the related issues I've searched for were all viruses but since this is brand new and has never been online that is not the case...unless an HP tech decided to play a cruel joke of course!
Could it be the network card? I didn't think so since it connects locally but who knows. I also disabled and enabled, took our sonicwall down and tried to obtain settings automatically, nothing works!
the internet connection to my computer was fine. Nothing wrong with it at all. I turned my computer off and went to bed. When I woke up the next day morning and turned my computer on, there was no internet connection. I turned my computer back off and went to school.I tried unplugging and plugging the Ethernet cable back in, but it will no longer connect with the Ethernet cable. I have managed to get it to work wire lessly.
View 17 Replies View RelatedMy computer will not connect to the internet, it was working fine then all of the sudden disconnected, I have tried all the basic things like restarting the modem and using a different Ethernet, but none of those worked, so I am convinced that the problem is with the computer itself. I have it set up so that my netbook(which I am using right now) is wirelessly connected to the internet, and I have a ethernet cable going from the netbook to my desktop, giving the desktop internet(until it had this connection problem). I am using windows xp professional, and I have spent a lot of time browsing to try and fix the problem, but so far it is to no avail. First I'll start by saying when i try to repair the connection it comes up with the message " the following steps of the repair operation failed: renewing the IP address" I tried using ipconfig /release then ipconfig /renew, but when I do this it says "an error occured while renewing interface local area connection: unable to contact you DHCP server. request has timed out" when I type in "ipcofig" it says my IP address is 169.254.xxx.xx, after researching more i found out that this is bad, but when i try to renew to get rid of it it gives me the "unable to contact DHCP" message. I even tried reformatting with a different windows disc but the connection problem still persists.
View 14 Replies View RelatedThis morning I noticed my home computer would not connect to the Internet. I thought maybe it was my wireless router so I rebooted both my cable modem and my router.It didn't work, my router lights are all normal saying I have Internet access and such, and I realized I can get on from my phone wirelessly, however my computer that is wired has 0 connection, and WIFI works. When I go through my networks it says all my IP numbers are 0.0.0.0.
View 14 Replies View RelatedSo last night I unplugged my modem from my computer because I had to move my computer to my other room. Now when I plugged everything to the computer today the internet didn't work. My computer only connects to a public network which is very slow. I want to connect it to my own home network but it doesn't
View 1 Replies View Relatedihave a ip adress of anoter pc and i want to acess inter net how can i do it?
View 1 Replies View Relatedi just built my own pc and managed to get it working. so i buy a 25 ft cable and connect one side to my pc and the other one to my modem. my modem recognizes there is a cable connected to it and so does my pc, but it can't find an internet connection.
View 3 Replies View RelatedRecently I have had to forward some ports in my router settings for a game... but now my mothers computer (running windows xp) cannot connect to the internet. My computer however can connect to the internet. When I set up a manual broadband connection it does connect and everything works fine with my mothers computer.(with this I sometimes have to redial 2 or 3 times). My main concern is why all of a sudden the computer doesn't connect automatically to the internet?
View 1 Replies View Relatedhow i connect two computer via internet
View 2 Replies View RelatedI would like to use my laptop that is connected through an rj45 cable for internet somehow to m tablet, can it even be done.
View 1 Replies View RelatedAnd I have tried everything I can to fix it in the last 3 days. It has always worked on my home network as a home network, and one day it seems to decide it's a public network. My computer has some limitations even with it being with administrator rights because it works from a school domain. And it happens to be that one of the few things that are limited is the ability to change a network status from public to home/work. Other Windows 7 computers like the one I'm using now can change its options, so why not mine? I have tried everything I can to fix the problem.
I started from the basics, resetting router, wireless, and all. Also, I tried a local area connection directly, of course this made no difference. I then went through every possible thing I could in the troubleshooter, still nothing.I then went straight for manually making my own static IP by finding the IP and DNS through the cmd and all, it made no difference. I even went to changing the option of "unidentified networks" to be recognized as private, but that didn't work either.I did this combofix utility process, but nothing came out of that either.
I'm working with a friend out with his computer, and he can't connect to the internet, but i can.But he uses a different computer system than me and turning on the wireless networking.
View 1 Replies View RelatedInternet was working fine this morning, then stopped just now.I have a Windows 7 computers connected via Wifi to my BT Homehub.Wireless icon in system tray has a yellow exclamation mark on it and cannot connect to the internet on any browser.Have tried a window restore to a couple of days back and have restarted numerous times, nothing has worked.
View 8 Replies View RelatedMyself and a friend used to play a game over the internet and join via ip address after a few years and upgrades to windows 7 we decided to do this again problem is we cannot seem to be able to connect via ip address using windows 7 does not even work after using port forward on my machine (host) and disabling firewalls on both machines.
View 3 Replies View RelatedI'm trying to connect to the internet through a Netgear wireless N-300 WNR3100 USB adaptor, but whenever I try to connect to the network, it says "The connection was unsuccessful. This computer currently has limited connectivity to MyNetwork." I have absolutely confirmed that it is not an issue with the device itself, because I went through an all-steps process with a Netgear representative trying to fix the issue, and once we tried to install and use it on my laptop it worked without a hiccup. But wait, there's more. My computer ALSO refuses to connect through a Netgear Wireless N WN111v2 adaptor, so it's very clearly not an issue with the adaptor. And I've saved the best for last: The computer won't even connect to the internet when plugged in directly to the LAN through an ethernet cable.
I've confirmed that the port and cable both work by trying to connect my laptop to them, and it works just fine. So the only option left is there's an issue with the ports on my desktop. They apparently only have problems connecting to the internet however; plugging in any other USB device has them work just fine, and even when the adaptors are plugged in, they have at least some connectivity capabilities, since the network shows up and allows me to attempt to connect to it.
I have a Belkin F5D8636-4 v2 N Wireless Modem Router. For some reason, it will only connect to the internet if the wired computer is plugged in and on. I tried starting the router without it plugged in and it kept trying and failing to connect to the internet. As soon as I plugged in the wired computer it connected to the internet. jhb019 has chosen the best answer to his/her question.Click here to view the answer that was selected.
View 7 Replies View RelatedIt's not wireless but the leads and cables are all plugged in?!
View 11 Replies View RelatedA couple days ago my gateway nv53 running windows 7 suddenly shut down not too long after a virus was found, upon restarting the Internet is no longer connecting and saying it is connected with "limited access". My iPhone, Xbox, and other devices in my apartment still function normally and only my computer is not connecting.
View 1 Replies View Related