Linksys Wireless Adapters :: WMP546 / Unable To Connect To Internet With XP Computer
Jun 4, 2011
I am unable to connect to the internet with my XP computer. I am running Apple Air Port as my router. The wireless network has an iMac, an IBM Think Pad(XP SP2)and a Dell XPS 410 (XP SP2). I am using WPA security and the Dell will not connect while the other two computers always connect. My wireless network is broadcasting, but when I try to connect after entering the proper key, it attempts to connect but appears to time out and displays the available wireless network. I tried reinstalling the drivers, but no success. Device Manager says the card is working and enabled.
View 5 Replies
ADVERTISEMENT
May 21, 2012
No issues with other wireless devices in the house (HP laptop, Roku and an Android phone).
I've confirmed that the correct WEP security setting is selected. I've tried using every available key to no avail. I've reset the security keys. The latest firmware is installed (1.0.04) I've powered the router on/off.
[URL]
View 2 Replies
View Related
Nov 5, 2011
I recently moved to a building that does not have wired Internet access. Upon the recommendation I purchased a Linksys AEE 2500 USB wireless adapter. I am unable to install the software which means, of course, I am unable to access any of the settings.The setup initializes, shows me the wireless network available (it has a locked padlock symbol next to a), and prompts me for the encryption key. It accepts the key and it's at this point the setup stalls. It shows the "attempting to connect to network" screen then, after whatever interval the software is set for before it times out, I get a notification that setup was unable to access the network. The generic Windows drivers access the network just fine although I only get two bars and a fair connection.I do have Internet connection through the windows drivers but it is slow and watching streaming video from Netflix is next to impossible.Long story short
View 4 Replies
View Related
May 8, 2012
I can't connect on my 2500 on my xp system. I just wiped the drive and did a fresh install on everything due to a virus. I updated xp/ and drivers and installed the ae2500 drivers. When I try to log on it starts to and shows connected however, it tells me "windows was unable to find a certificate to log you on to the network" I noticed that this system has the same ae2500 with windows vista and uses wpa2-personal, aes. The xp system only has options for wpa-personal, aes. Is this the problem or is it something else?
View 1 Replies
View Related
May 8, 2011
I have a WUSB600N version 1, with the newest driver (offical 3.0.10.0), my Windows 7 Ultimate installation has the proper regional settings, and within the driver setting the Linksys device has the correct country region (#1, 1-13).However, I am unable to scan and connect to channels higher than 11. as tested with the network manager in windows plus inSSID scanner. My other devices on the same network see the higher channels.
View 4 Replies
View Related
Apr 13, 2013
I cant get it to connect to internet, it keeps giving me an error message. I have windows 7 and Linksys WiFi Router E2500
View 1 Replies
View Related
Dec 2, 2012
I have an old computer that is Windows 98SE. It uses a dial-up connection, but I don't have a phone line anymore so I've been trying to find another way to connect it to the internet. I've tried connecting it to the internet by connecting it to my Linksys wireless broadband router but that doesn't do anything. I also have a wireless notebook adapter that I've also tried to use but the driver needs to be reinstalled or updated and I don't know how to do that. I've lost the installation disk that came with it also. Do I need to buy anything to make it work?
View 4 Replies
View Related
Mar 28, 2011
I just bought a Wireless-N PCI adapter (WMP600N) and followed the instructions given by the CD. I installed the card into an empty slot and ran the CD to install the drivers, but error message 221 keep appearing to tell me that the computer can't see the adapter.
My computer runs on Win 7, 32-bit so I have downloaded the latest drivers for Win 7 from your website. Now I want to manually update my adapter to the Win 7-driver, but I don't know how. The adapter won't even show up in the device manager.
View 2 Replies
View Related
Jun 5, 2011
I've been using a WUSB600N wireless adapter with my WRT610N router for quite some time and it has been very stable for quite some time. A few months ago, I switched to a new computer, basically the same model (both computers ran Win7 64bit) except with more hard drive space and two extra cores. I then moved the old computer to the router for a direct connection, moved the new computer in the same exact place as the previous computer, and set up the WUSB600N on the new one. However, on the new computer, my connection has been extremely unstable. Sometimes the connection works fine, but other times there are long periods of no connection (though the computer tells me that I'm connected) and download speeds are horrid during this time period. What is causing the instability after only getting an upgrade to the previous computer?
View 2 Replies
View Related
Sep 8, 2011
I have the WMP54G internal wireless adaptor. It normally works fine, but I have been having problems with it lately when I turn my computer back on from sleep. Even thought the wireless router works just fine, when the computer wakes up from sleep the adaptor does not seem to detect any network. I have to restart my computer, and then the adaptor detects the network.
View 1 Replies
View Related
Mar 24, 2011
I recently upgraded my computer (not laptop) from Windows XP to Windows 7-32 bit. I redownloaded and installed Network Magic, Linksys Wireless Manager and my WUSB600N adapter properly (I hope). Now everything was working fine, I was able to get onto my network through the adapter but today I noticed that the Linksys Wireless Manager seemed to not connect to my network, instead my computer some how did it without the wireless manager. Now when I tried to connect to a network through the Wireless Manager it said Error: 211 and said My Adapter may not be installed properly and told me to remove the adapter and attach it back after 20 seconds. I tried that but again my computer connected to the network STILL through the computers own manager not through the Linksys Wireless Manager. That was still saying Error 211. So the problem really is that the Linksys Wireless Manager wont detect my adapter but my computer is still able to detect it and connect to my network.
View 4 Replies
View Related
Mar 28, 2013
I have a Cisco E1200, I am wanting it to connect to the net using Etisalat ISP. The computer will talk to the router and all the settings look correct but it will not connect to the internet.The router did a software upgrade that it deemed successful.
View 9 Replies
View Related
Mar 2, 2011
I want to use this adapter on a computer with Windows 7 Home Premium 64bit OS.Downloads lists versions V1.0 and V3.0 for this adapter. How can I determine the version I have?V1.0 list no driver for Win 7 64bit. V3.0 list a driver for Win 7 64bit.Research I found looks like the adapter is not computable with Win 7 64bit.
View 2 Replies
View Related
Jun 5, 2011
I have just installed a Linksys WPM600N Wireless Adapter. I am trying to configure the adapter to wake the computer from standby but the option is greyed out in the device manager properties box. how I can configure this adapter to wake the computer out of standby?
View 1 Replies
View Related
Mar 11, 2012
After installing a WMMP600N on an HP Pro 3410 (BIOS 7.04) the computer "freezes" after booting or doesn't boot at all. On the other hand, installing the same board on an HP (Compaq) DX2390 (BIOS 5.3) doesn't cause any problem: both the machine and the board work nicely together. Both machines run on Windows 7 Ultimate, with the latest driver from Linksys.
View 1 Replies
View Related
Mar 26, 2011
I'm trying to install a WMP54G PCI Version 4.1 in my Windows 2000 Pro SP4 computer. I ran the setup cd before installing the card, then took out the disk. After installing the card and powering the computer, the Available Wireless Network screen didn't appear. I also didn't get the Network Monitor icon on the taskbar. Network Monitor appears in the start menu, but can't be started. Device Manager says the card is working properly and there are no conflicts.
I uninstalled the software, removed the card, and repeated the installation process with the same end result. The card light blinks like it is receiving data. I'm using a Linksys WRT54G2 router. Both my desktop (W7) and my laptop (Vista) connect just fine. How can I get my W2K computer on the network?
View 5 Replies
View Related
Mar 26, 2013
I have a Cisco WRT120N Router and a Cisco Valet AM10 wireless adapter. Almost every time the computer reboots, I loose my network and I have to redo the AM10 setup. The AM10 is the only device that loses the connection, my lap top and printer do not lose the connection.
Problem 2: Everytime I upplug and replug the AM10 a window pops up saying I need to check the drive for errors but none
are found.
Problem 3: I downloaded the AM10 install program, Downloadable.Setup.AM10.1.2.10148.2. It does not work. If I try to run it Iget an error message that the setup canot be completed and to call in for support.
Problem 4: When I can get it working is shows that it is Wireless Connection 5. Why 5 and not 1? Where are the other 4?
<script id="overlay_tmpl" type="text/html">// <div id="<%= overlayId %>" class="_mp3rocket_overlay_style" style="left: <%= overlayLeft %>; top: <%= overlayTop %>; width: <%= overlayWidth %>; height: <%= overlayHeight %>"></div> // </script>
View 5 Replies
View Related
May 26, 2011
Whenever I try to install the drivers for the adapter normally, Windows 7x64 gives me a message that the device name "Compact Wireless-G USB Network Adapter" already exists and is in use, preventing me from installing the wireless driver properly. In order to get around it, I changed all "Compact Wireless-G USB Network Adapter" fields into "Compact Wireless-G USB Network Adapter B" in the netr28ux.inf file to make the driver install under a different name.I tried everything I can to remove all evidence of linksys drivers from my computer, uninstalling and removing driverstore with pnputil.exe, but I cannot seem to find the originating files to uninstall.For now the way I edited the netr28ux.inf file works, but I'd rather be able to install the driver as intended.
View 6 Replies
View Related
Oct 12, 2010
I purchased the AE1000 wireless adapter for use with my Linksys WRT54G router. I first tried to install by loading the CD, which went so far as the "Insert your adapter into a USB port" screen. The Windows "processing" circle spun for about twenty minutes, then I was prompted to "insert the wireless adapter" once more. Rinse, repeat. I absolutely cannot get past this step. I scoured the web for an answer and turned up little. I uninstalled my antivirus and firewall software, made certain that files associated with my prior adapter were removed, tried varying USB ports (all 2.0) on my desktop, and had no success. Today, I exchanged the adapter for a replacement, and I'm encountering all of the same difficulties.
View 6 Replies
View Related
May 31, 2011
OS - Vista Home Premium x32 I have a modem (Comcast) connected to my router (Linksys wireless-g /wrt54g v6) connected to my desktop which runs Vista.recently i am unable to connect to internet using my desktop, but I am still able to use my wireless devices such as wii, laptop, phone, ipad etc. with problem When I first boot up computer I receive error UPnP device host has stopped working. I close that and I have no network connections (linksys or LAN connections-icons) in my network and sharing area. Nothing is listed. When i click diagnose issue i receive the follow error A CABLE IS NOT PLUGGED INTO THE NETWORK ADAPTER "LOCAL AREA CONNECTION* 12" I have changed ethernet cords but still the same error. Nothng has been changed and as stated worked fine 2 days ago. I also did IPCONFIG and all i receive are ETHERNET ADAPTER LOCAL AREA CONNECTION* 12 MEDIA STATE.....MEDIA DISCONNECTED and so on. No IP address is listed.
View 4 Replies
View Related
Aug 12, 2012
My WRT54G2 v1 does not automatically connect to the internet on computer start-up. The computer will say "Connected, No Internet Access" In order to fix it I have to unplug the router and then plug it back in. This happens to any computer that tries to get online from a cold start-up. The router must always be unplugged, then plugged back in, then it will have internet access (and will generally maintain it throughout the session and even if the computer is restarted, i.e. warm boot). I have downloaded the latest firmware uprade.
View 9 Replies
View Related
Jun 15, 2011
My AE1000 has worked for about 2 weeks, but just stopped working. Have tried to reinstall but it won't recognize the adapter. I can't click the "next" button to continue the installation. I have chagned the USB ports and restarted the computer. But it still wont install. I have Windows Vista. I also have Norton, do I need to uninstall this?
View 1 Replies
View Related
Sep 6, 2011
My WMP600N has been giving me some trouble. It randomly, meaning I have been unable to predict the loss in connectivity, drops all wireless connectivity. During one of these blackouts, the device registers as functioning correctly in the device manager. Installation went fine when I bought it last month.I have only noticed this rude interruption during a game of Rift, probably because its impacted so heavily by the interruption.
Further detail:
- The wireless icon continues to display during the loss of connectivity.
- I have another compute and a smart phone which remain connected during the loss of connectivity.
- The duration of the loss of connectivity is approximately 25-30 seconds.
View 1 Replies
View Related
Aug 13, 2012
Due to some reason I had to reset my linksys router WRT54G and now I am not able to connect to internet using my router. I tried coupld of settings followings some suggestion over internet sites but doesn't work for me. Still I get no network access message.
View 1 Replies
View Related
Sep 15, 2012
I just upgraded my router from an old wireless54G to an E1200.The wireless device I have on my Sony Viao PCG GRT-240G laptop is LAN-Express AS IEEE 802.11g miniPCI Adapter
-Initially I couldn't connect at all with this machine (however the other two newer laptops could) so I contacted the Linksys tech and he advised I should upgrade my laptop driver
-After much research about this I found a common fix was to upgraded drivers from the 2004 sony driver to atheros_wifi_9.2.0.480 drivers.
-After I did the upgrade I can connect to the router on the guest account and use the internet
However, on the Main account I can connect to the router but I have no internet connectionGoogle chrome gives error belowThe server at [url]... can't be found, because the DNS lookup failed. DNS is the network service that translates a website's name to its Internet address. This error is most often caused by having no connection to the Internet or a misconfigured network. It can also be caused by an unresponsive DNS server or a firewall preventing Google Chrome from accessing the network.How can I use one part of the network but not the other part? Shouldn't both the guest & main accounts use DNS lookup?
View 2 Replies
View Related
Apr 30, 2013
I have a few devices I cannot connect to my router or modem but my ps3 and 2 xboxes are connected. I have easy link and I try to add devices to it but it doesn't show me the same options it did before when I added my ps3, and ipod. Now I can't connect my psp or any phone to it, I have the WRT54GS v7.2, those are my only problems with the router nothing.
View 3 Replies
View Related
Dec 13, 2011
I have had this router with no real problems for the past 2 years. As of now I can't connect to the internet through the router wired or wirelessly. I have tried all the hard resets and other tricks. I can go straight from my internet connection to my computer and it works fine. Once I go through the router using a lan cord all I get is limited or no connectivity. I have tried to access the router set up using the 192.68. etc but can't just states invalid address. Anything else to try or is this thing bricked ?
View 1 Replies
View Related
Dec 23, 2011
Ok group here's the issue. I have a E2500 router with a wired connection for my sons xbox and 2 laptops connected to it. The laptop I used to set-up the system will usually connect to the router but not allow me through to the internet then after a shutdown and repowering it connects. what to check? The othhitch. Both arer laptop connects without a e running vista home.
View 2 Replies
View Related
Sep 28, 2011
I am using the following model and version:
Model No.: WRT54G, Ver. 7.0
I am not able to connect to the internet through Linksys Wireless Router. I have tried pinging the default gateway of the ISP provided router IP from the router utility, "Diagnostic", but I am not able to ping it.
View 7 Replies
View Related
Dec 7, 2011
For some reason my wireless router recognized my pc, or my modem, Neither is it able to connect to the internet. All the lights are on but not flashing/blinking like they used to. I tried to run the setup over and it couldn't find the router even though everything was plugged correctly. I tried reseting the router but that doesn't even affect it. All the lights remain on with on blinking or flashing no mater what I do. Is there anyway for my router to work normal again or do I need to get a ned wireless router?
View 15 Replies
View Related
Feb 2, 2011
I am unable to connect my computer to a wireless network.
View 2 Replies
View Related
Mar 29, 2007
I just got a WET54GS5 to use for game systems. i wa able to use the software in order to get the system online and working, but i am not able to access the wireless bridge though the web page. the username is blank and i put in the correct password, but it does not go through.
View 7 Replies
View Related
Mar 24, 2011
I have a new Linksys E2000, I was unable to connect one of my laptops to the internet, so I decided to call support with the problem, after 45min and not results, find out that the E2000 do not support the Atheros AR 5007, they told me that I need to get a new driver for my adapter. Fine but Cisco doesn’t have a Driver update for this problem or how to fix it, or at least send you a link where to get the fix.
View 4 Replies
View Related
