Wireless Security Key Not Working?
Dec 25, 2012My security key is not working to connect laptop, ipod.
View 2 Replies
ADVERTISEMENT
Cisco Security :: 2800 - Internal Wireless OWA Isn't Working
Nov 18, 2011I'm running an exchange server beings my 2800 router and its all working well i have setup NAT and OWA is working well when external and on the internet but when the phones are on the internal wireless OWA isn't working and if u telnet the external ip on that forwarded port it doesn't forward i believe this is the fact the port forward rule "ip nat inside source static tcp 10.0.100.7 443 interface Dialer0 443" is for the dialer interface only and as I'm internal nothing but I'm show to forward any request on that port.. ill include the config below
!!no logging buffered!aaa new-model!!aaa authentication ppp default local!!!!!aaa session-id common!clock timezone WST 8 0clock calendar-valid!dot11 syslogip source-route!!ip cef!ip dhcp excluded-address 10.0.200.1 [code]......
Linksys Wireless Adapters :: WUSB54AG Not Working With Security Of New Netgear
Apr 16, 2013Just got a new router. All of my devices connect fine to it except for the desktop that is using an external Linksys wireless adapter (WUSB54AG).The desktop is running Windows XP (Home Edition) SP3.The latest driver for the adapter has been installed (3.0.18.0).I am able to connect if security on the router is turned OFF.The router has 3 security options:
1) WPA-PSK (TKIP)
2) WPA2-PSK (AES)
3) WPA-PSk (TKIP) + WPA2-PSK (AES)
My understanding (from Linksys tech support) is that the device SHOULD be able to connect using WPA-PSK (TKIP). My Linksys Monitor indicates that the device is connected to the access point but not the internet (when I used WPA-PSK (TKIP). The IP address that is assigned is 169.254.3.129 and not the expected 192.168.1.x.When I turn security OFF on the router, the device can connect and I am assigned a "good" IP address (192.168.1.x).
Linksys Wireless Router :: WRT610N - Security Not Working After Firmware Update
Dec 26, 2011I have a WRT610N (v2) router and I recently updated the firmware to the most current version 2.00.01 build 15. I can no longer set WPA2 security for both bands (used to work just fine). Every time I try to save settings for WPA2 for the 5 GHz band, it tells me it was successful but then displays that the security mode is disabled (and it shows up on my computers list as not having any security enabled. If not, where can I get a copy of the old firmware that worked?
View 8 Replies View RelatedCisco Security :: 871 - Ssh Not Working
Nov 2, 2011I am setting up ssh on my 871 router and I get prompted for only a password. I have typed in the correct password and it doesnt let me in. I also have telnet enabled and with telnet I do get prompted for both username and password and I am able to login. I would like to setup ssh so that it used the local username and password. This is what my vty has.
line vty 0 4
access-class 23 in
privilege level 15
login
transport input telnet ssh
Security / Firewalls :: Lan To Lan Vpn Tunnel Is Not Working
Feb 12, 2012I have problem with the Lan-to-Lan VPN tunnel.the VPN working fines since 9 months ago without any problems.Suddenly got the problem!,In last two days we faced problem the VPN down.in first time the problem in phase-2.. but after that in phase-1... in latest no data packet received to their side.
View 1 Replies View RelatedBelkin Routers :: N600 - Security System Is Not Working
Nov 1, 2012A N600 Router Model F9J1102v1 router first installed in July 2012 with WPA-PSK, MAC Address Filtering and "Self Healing" enabled would not allow a new PC to connect via an RJ45 port. Belkin support ask for the unit to be reset to factory settings which is done and the Security system re-enabled again. Valid MAC Addresses start to be added and midway a PC is discovered in the Network without its MAC address added. Closer scrutiny reveals that another unknown device has also found a way into the router and that the 'Block' option on the MAC list is also failing to work. Anyone think of what one should do with this security shambles other than turn the thing off quick?
View 7 Replies View RelatedCisco Security :: ISE 1.1.1 Login Not Working After Install On VMWare On ESX 5.0
Oct 1, 2012I did an ISE 1.1.1 installation on a VMWare with ESX 5.0. After installation I am not able to login with my credentials(username admin, password XXXX) I can ping my ISE server after initial installation but I can not ping my ISE server after full installation.I did the installation several times and even did it on a VM with differrent VMversion.
View 3 Replies View RelatedCisco Security :: Mac Address Bypass Not Working On 3560G
Jul 18, 2012I'm trying to configure MAB on a Cisco 3560G to work with FreeRADIUS.
I have been assured that my RADIUS configuration is fine and the server is functioning properly.
This is my current switch config:
Header 1
!
version 12.2
no service pad
[Code].....
Cisco Security :: 3560G / NAC Setup / Authentication Not Working?
Nov 22, 2009I am trying to get a NAC demo running and am having some issues with a Layer 2 OOB, Virtual GW configuration. Currently I have 3560G switches and would like to assign ports to a vlan based on user roles.
My Auth VLAN is 110 and maps to VLAN 11
Guest VLAN is 11 (172.16.1.0/24)
Employee VLAN is 1
NAS Mgmt VLAN is 20 - CAS is 10.10.20.5 (this ip is setup on both eth0 and eth1 per documentation for L2 OOB Virtual GW)
NAM Mgmt VLAN is 30 - CAM is 10.10.30.5
Untrusted (Eth1) switchport is setup as a trunk allowing only vlan 110 and has a native vlan 999 to blackhole traffic.
Trusted (Eth0) switchport is setup as a trunk allowing vlan 1, 11, 20 and has a native vlan 998 to blackhole traffic.
I also setup a Managed Subnet on the CAS with IP 172.16.1.254 and VLAN 110.Switchport controlled by NAC is access vlan 110. When a machine connects an snmp trap is sent to CAM and is forced into vlan 110. If I try to put the port in another vlan CAM puts it back to 110 immediately. This all seems to be working well.The machine connected to the port gets a DHCP address from VLAN 11. When I initiate traffic from this machine, everything is blocked. If I open a web browser I do not get an authentication page. I also installed CCA 4.1.10 on the machine but it does not find a discovery host and the Login option is grayed out. The only way to get this machine to send traffic is to add a filter for it and force it to the ALLOW option. I did setup a default web login page but I seem to be missing something to get authentication to work. I am running version 4.1.8 with a demo license. The host running CCA is Windows Vista.
Cisco Security :: 831 / DDNS Update Not Working Due To Time Out
Mar 21, 2005I am using an 831 router and am trying to get DDNS to work. Here is the debug output:
RESS_ASSIGN: Interface Ethernet1 assigned DHCP address 67.162.204.242, mask 255.255.254.0, hostname testlab831.xxxxxx.com
00:53:06: DYNDNSUPD: Adding DNS mapping for testlab831.xxxxxxxx.com <=> 67.162.204.242
00:53:06: DYNDNSUPD: Sleeping for 3 seconds waiting for interface Ethernet1 configuration to settle
00:53:09: HTTPDNS: Update add called for testlab831.xxxxxxxx.com <=> 67.162.204.242
00:53:09: HTTPDNS: Update called for testlab831.xxxxxxxx.com <=> 67.162.204.242
[code]....
what the problem is with the "Call returned Connection time out for update testlab831.xxxxxx.com <=>" line.
Security / Firewalls :: VPN Access Stopped Working On Watchguard Firebox?
Sep 13, 2012Previously we had no problem with remote users connecting via VPN but recently they can't connect and i've checked the firewall and it shows the errors (see attached jpeg) but I'm not sure what it all means.
View 2 Replies View RelatedSecurity / Firewalls :: Windows Vista Firewall / Internet Not Working
Apr 4, 2011i am using windows vista on my laptop.i was using zone alarm firewall, but switched it to windows firewall.after switching, my internet was cutoff. i can see that i am connected to my network, but cant get to internet.when i run diagnosis on my laptop, it gives me three options:
my Ethernet driver is having hardware issue.
my wireless driver is having hardware issue.
ip protocol binding is having issue. check ipv4 and ipv6 settings.
Security / Firewalls :: Norton 360 Gold Edition Isn't Working Properly?
Apr 22, 2012Last year i installed nortor 360 gold edition onto my laptop and now it is telling me that it is not automatically protected against viruses and spyware, even though it has the latest update and no problems have been found on my laptop.
View 1 Replies View RelatedCisco Switching/Routing :: 2950 Port Security Is Not Working
Feb 23, 2013I have network consists of more then 20 cisco 2950/2960/3700 switches. I have configured port security in my switches. initially when i configured on my switches it worked fine....even for copule of months it worked fine. but suddenly it start creating issues and now i am not able to implement port security on switches. the configuration is same but there is no effect now. Same switches were fine but now even having same configuration it is not working. please see the configuration: [code]
View 5 Replies View RelatedCisco Security :: ASA5505 To Allow SMTP Relay And ACL Static Created Is Not Working
Dec 30, 2011I am trying to configure my ASA5505 to allow SMTP relay and the ACLStatic I created is not working. [code]
View 3 Replies View RelatedLinksys WRT610N Wireless System With WPA-PSK Security / Security Settings Does Not Match
Mar 29, 2012I have a Linksys WRT610N wireless system with WPA-PSK security and this works fine with several computers but now one computer detects the wireless security as WEP and can thus not connect to the router. I have tried to manually connect to the router with correct security WPA-Personal (TKIP) and correct password but then the computer says "settings saved on this computer for the network do not match the requirements of the network".How can I get the computer to detect the correct security? The computer is running Windows 7 home premium.
View 7 Replies View RelatedSecurity / Firewalls :: Connecting To A Security-enabled Wireless Network?
Jan 19, 2013I am trying to connect to a Security-enabled wireless netowork. I have the key. My problem is that I can't seem to figure out how to enter it. When I try to connect I open the "view available networks"window. I see the network name and it shows a strong signal (all 5 green bars).
View 3 Replies View RelatedSecurity / Firewalls :: Security Tools And Techniques For Wireless LAN?
Apr 20, 2013Some security tools and techniques for wireless LAN??
View 1 Replies View RelatedSecurity / Firewalls :: FCC Is Investigating Pogo Game Site Because Of Poor Security
Mar 24, 2013Is it true that the FCC is investigating the Pogo game site because of poor security? Is Java the cause of this problem?I'm very leery of getting on the Pogo site because I've been told that my computer could get a virus and crash.
View 1 Replies View RelatedCisco Security :: Finding Security Labs For GNS3 Or Packet Tracer?
Dec 19, 2011I'm studying for CCNA Sec exam and looking for any security labs for GNS3 or Packet Tracer.
View 3 Replies View RelatedSecurity / Firewalls :: Sonicwall Network Security Appliance - Receiving A Content Blocked Message?
Dec 24, 2011I'm new to IT, and have been put in charge of managing our servers hile my boss is on vacation.We currently have a Sonicwall Network Security Appliance that handles our Firewall/VPN and have web content filtering set in place.I have a user who belongs to 2 CFS policy groups that we have set up. I've double checked with Active Directory, and he is a member of both groups.
This person SHOULD have access to Job searches/ and Restaurants,but receives a "content blocked" message on his browser.It appears to me that the settings in Sonicwall are correct, as well with AD member groups.
Cisco Security :: Configure 802.1X Security Through ACS 1120 Server And NAC In Layer 2 Inband Virtual Gateway?
Feb 28, 2011My company ordered NAC and ACS 1120 My question is Can i configure 802.1X security through ACS server and NAC in layer 2 Inband Virtual Gateway.for campus switches.Is it the good design to have double security for switch ports. 1st is 802.1X and 2nd is NAC in layer 2 INBAND VG?
View 1 Replies View RelatedCisco Security :: How Many Default Context In ASA 5510 Security Plus Edition
Aug 8, 2006ASA 5510 security plus edition will it support active/active failover. and does it support context with securiyt plsu edition. and how many default context do we get with asa 5510 security plus edition.
View 3 Replies View RelatedSecurity / Firewalls :: Install Microsoft Security Essential On PC?
Sep 15, 2012I want to install Microsoft Security Essential on my PC, but I am not sure which download I need. One says amd64 and the other is x86. I am using windows xp 32bit.
View 2 Replies View RelatedSecurity / Firewalls :: Get Security Key Password For My IPad?
Jun 10, 2012How can I get the security key password for my iPad?
View 2 Replies View RelatedSecurity / Firewalls :: Security Update Keeps Trying To Install
Dec 28, 2011I have windows xp home and the last few days a security installation has kept trying to install ie: "Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242) (update 1 of 1)..."
View 3 Replies View RelatedRouters / Switches :: How To Change WPA Security To WEP Security
Aug 22, 2011my router has a WPA security system and I want it to be a WEP security system, what must i do?
View 7 Replies View RelatedCisco Security :: ASA IOS 8.3 Local CA Security Vulnerability?
Apr 9, 2011I was informed by a co-worker that there is a security vulnerability with the local certificate authority in the ASA running 8.3 code. I've looked through the security advisories and haven't been able to find anything about this. Was this just misquote or am I missing the security advisory release?
View 1 Replies View RelatedCisco Security :: ASA 5505 Security Plus Licensing?
May 24, 2011I have a ASA 5505 that I test with which originally came with the Security Plus license. I recently erased flash and loaded the latest asa841-k8.bin version of IOS along with asdm-642.bin. Everything booted fine and came up as it does when freshly wiped however I noticed that i was now only running a base license. If I issue the sh activiation-key command, I noticed the following messages (full output is at the bottom):
The Running Activation Key is not valid, using default setting
......
This platform has a Base license.
......
Failed to retrieve flash permanent activation key
Did I somehow kill my Security Plus licensing when I did the erase flash? If so how do I recover it?
ciscoasa# sh activation-key
Serial Number: JMXXXXXXHU
Running Permanent Activation Key: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
The Running Activation Key is not valid, using default settings:
Licensed features for this platform:
Maximum Physical Interfaces : 8 perpetual
VLANs : 3 DMZ Restricted
Dual ISPs : Disabled perpetual
VLAN Trunk Ports : 0 perpetual
[code]...
This platform has a Base license.Failed to retrieve flash permanent activation key.The flash permanent activation key is the SAME as the running permanent key.
Broadband :: Tools Can't Find Working Off Line Or Working Online
May 9, 2011XP Home edition, went to tools can't find working off line or working online to make sure off line is not checked so I can get on line DSL Verizon , Wireless router, wireless switch in on, on the cpu
View 1 Replies View RelatedWifi Not Working On Asus Laptop - Lan Working Fine?
Feb 15, 2013ASUS Notebook G60Vx Series
Windows 7 Home Premium 64-bit
Intel(R) WiFi Link 5100 AGN
A few days ago my internet suddenly stopped working. I plugged in the ethernet cord and everything worked fine. Checking the properties in the device manager showed the device was working properly, I also tried resetting it to make sure it was enabled but it did not work.
Upon troubleshooting, the "Windows Network Diagnostic" said the problems was that the Wireless adapter was not turned on. Using the switch on the front of the laptop as well as the function keys does nothing. Usually a graphic pops up showing if the WiFi is on or off, changinging transparent to show the WiFi is disabled. Now when I turn the switch on it always appears transparent, effectively going from off to off
So I know the computer reads both the function keys and the switch on the front but both methods never actually turns the adapter on. I just finished a system restore and nothing has changed
Security Key For Wireless?
Apr 18, 2011How do i find security key
View 1 Replies View Related