Acl For Public Wifi Not Working When Applied To Trunk?
Jan 17, 2012
So there are two VLAN's traveling over the port attached to the controller (User vlan 100, and Guest vlan 102). I need to block the guest from everything but the internet allowing the free flow of everything else on the User vlan. All info sanitized of course.I think I have the ACL's correct for what I am trying to accomplish I just can not get this ACL to work on a trunk port.Confirmed the ACL to work correctly on access ports however.
ip access-list extended Wireless
permit ip 172.100.0.0 0.0.255.255 any
permit udp any any eq bootpc
permit udp any any eq bootps
permit udp any any eq domain[code].....
View 2 Replies
ADVERTISEMENT
Oct 6, 2011
Telco provided a BGP connection on MPLS network. When I connect router directly to Telco switch I can see BGP neighbor, so my router BGP config is OK. However, I need to put this router in a diffferent building and want to bring the connection over on a "trunk"; now I loose the BGP neighbor. I'm sure I did this before and it worked OK. I'm trunking between 2 x2950 switches using this config on each switch. [code]
I also configured the trunk as vlan 1214, which is the encapsulation provided by the Telco (dot1Q 1214).
View 6 Replies
View Related
Nov 8, 2011
I have a couple 3750 switches that I am trying to run VTP Version 3 on.one as primary and the other as "server" which implies secondary from my research. [code]Additionally, running a show VTP devices yields a "No VTP3 devices found" on both devices. Despite ensuring that the domainname and password match.I have a patch cable from Gi1/0/1 on switch one runnning to Gi1/0/1 which from what I read is acceptable on GigE.
View 2 Replies
View Related
Apr 11, 2013
Is there really any reason why you wouldn't use spanning-tree portfast on a trunk port other than a trunk between two switches? We have it enabled on all ports except for the fiber trunk between two non-stacked switches and the trunk ports connected to our Astaro firewall.I'd like to enable it on the ports to the firewall unless that would cause issues.
View 9 Replies
View Related
Feb 12, 2012
we recently aquired a managed services job and have to do a overhaul of the vlan configs and have a whole dozen WC2948G's trunk between a set of ports as well as trunk out a LAG channel setup to non cisco equipment. the deal is the lacp-channel works properly on both ends but no routing of vlans between ports and between the lag trunk are working.
theres alot of settings in the config and im planning on clearing it and starting from scratch but before i do i want to know where my problem lies.
[code]...
View 6 Replies
View Related
Mar 1, 2012
For some reason I cannot connect to a local public wifi location that I frequent. It has really been a problem. Everyone around me connects no problem but I do not. I have no problem connecting to other locations.below is network environment.I have Mcafee and running windows 7. I use netgear modem and hawking 300n extender. [code]
View 3 Replies
View Related
Feb 20, 2013
New Dell laptop w/Windows 8 OS. Cannot access wifi in local cafAt network & sharing center - Access Type: No Internet Access - Getting full signalHave McAfee Antivirus Plus installedHad this problem before and completely uninstalled/reinstalled McAfee. Problem was solved temporarily
View 5 Replies
View Related
Feb 19, 2013
I am able to connect perfectly at home but no longer in public areas such as Starbucks, etc. I do not get the public website to agree to the terms and connections. My laptop tries to connect to my homepage and skips the log on page then freezes and I receive an error message that there is no internet connection. When I go to "Data Sharing Center" it states that I am connected.
View 1 Replies
View Related
Aug 19, 2011
I like to create a village-wide wifi network...The purpose is to provide a public service so although we'd have to charge to cover capital and operating costs but the purpose would be to run it on a non-profit basis. If it does by chance make a profit it would be donated to local community projects so we should be able to get support from local business and residents if the technical solution requires their collaboration.
View 1 Replies
View Related
Nov 10, 2011
I've got a dell n4110 windows 7.
For whatever reason I can't connect to public wifi (school, library, cafe, etc) but I am able to connect to my home wifi no problem.
I can see it, just can't connect (doesn't give an error message, just says unable to connect).
View 16 Replies
View Related
Jun 27, 2012
Is there any reason why when my fiance' in australia connects to a public network at mcdonald's that he can't log into msn, facebook, or thunderbird?
View 2 Replies
View Related
Mar 8, 2013
Will my Kindle be able to access public WIFI as in a WIFI enabled train or bus.
View 1 Replies
View Related
May 20, 2012
I am unable to connect public wifi since yesterday but its ok for company and home wifi.
View 2 Replies
View Related
Aug 12, 2011
I always get connected with no problems, then as soon as I try to do anything (check e mail goole something) I get disconnected either there is no internet access or no network access. I've tried different firewalls and using chrome browser rather than explorer,but the problem persists.
View 1 Replies
View Related
Aug 28, 2011
Anyway, I have a Toshiba Satellite L645D-S4056 with Win7 Home Premium 64-bit. I've had it almost a year now and have never had trouble connecting to public wifi.Recently, I moved into a new apartment with free wifi and I seem to catch the signal from my apt even though it is poor. Every time I try to connect with my Toshiba it says, "Windows is unable to connect to 'linksys'." However, my husband's HP laptop and my old eMachines laptop (7yr old) (which I am using to research the problem) can connect with absolutely no issues. When I go to the clubhouse, my Toshiba can connect, however it cannot identify the network and does not receive an actual internet connection.
So far, I have uninstalled/reinstalled and updated my network adapter (Realtek RTL8188CE), I've used Command Prompt ipconfig /reset and ipconfig /release along with several other commands suggested to other wifi connection problemsI've checked my DHCP and DNS to ensure they're enabled.As for firewalls, I have turned off windows firewall and have disabled Kaspersky protection, however I have yet to uninstall and reinstall, this being because I can connect to a password prompted internet connection at work.I am unsure how to check my IP address or any of that
View 2 Replies
View Related
Feb 25, 2013
LT w/Windows 8 OS, still cannot connect to public access wifi. Ping test fails. Firewalls disabled. McAfee removed w/MCRP, no other virus software.
View 4 Replies
View Related
Sep 26, 2012
i have a acer laptop running windows 7 ultimate. I am unable to connect to public WiFi hotspots. But i m able to connetc to ad hocs and my mobile WiFi hotspot
View 2 Replies
View Related
Apr 2, 2012
I just moved into an apartment where the internet is being provided to me via wifi (open). The landlord doesn't have a private network, he is with me. What I'm was curious about is if it is possible for me to use a second router to create a secured network for all my devices? My thought would look like this: ISP>Landlords Router>wireless>MyRouter. I know you can have private and public wifi but the two routers have to be connected. I haven't talked to him about the fact that he needs to secure his router mainly because we never cross paths.
View 6 Replies
View Related
Jan 20, 2011
i have angels online installed in my laptop and now i'm in the hospital and i'm trying to use angels online, i was able to update the new patch for the games which shows that the internet works but when i try to connect to any of the servers it says that the connection to the server failed. how do i get my online game to work with the public internet?
View 1 Replies
View Related
Feb 12, 2012
I live near several public hit spots. A geek told me I could configure my PC (XP) or laptop (Win 7) to act as a wifi receiver and connect that to my wireless router to distribute the Internet connection to my Blue-ray and other laptops. I can't figure out the correct steps to make it work.
View 8 Replies
View Related
Jan 15, 2012
I work at a Public Safety building in Pennsylvania and our employees here share a Wifi connection with a local hospital facility that is in a industrial park behind us. The room we work in is able to access the Public Wifi but only half of the room has a good connection. I went to the local computer store and purchased a Belkin Dual-band wireless Range Extender and got it all set up, now I have the Public Wifi Extention access and it will connect to it but it has no internet access. Now we have no access to the administor or the network from our facility. How do i get internet access thru this range extender? If i connect from the good half of the room to the Public wifi i have a good connection with internet access but as soon as you put it thru the extender no more internet access.
View 1 Replies
View Related
Nov 13, 2012
I've got a Dell laptop with Windows 7 and I'm unable to connect to public wifi. I have a home wireless connection that I'm able to connect to, and I'm able to connect at friends houses. But when I try to connect at a local coffee shop, it doesn't work.
View 4 Replies
View Related
Nov 13, 2012
I'm using a Dell Vostro, running Win Vista with all updates. I have Trend Micro Titanium and Comodo Firewall. I primarily use Firefox (completely updated) but also have IE 9. Until a few days ago I regularly connected to various public WIFIs, by: connecting to the WIFI network, opening Firefox which would then automatically take me the network's (Panera for example) user agreement page, clicking on "I accept" or "I agree" then gaining access to the internet. Two days ago I was at a local establishment where I have connected before. I connected to their network and opened Firefox as usual. Instead of connecting to their user agreement page as usual, Firefox tried to connect to my homepage (Washington Post) and failed.
The network icon in the sys tray showed I was connected to the local network but with local access only. This has now happened three times in three different public locations over the past 2 days. Each time I've successfully connect to the network but when opening Firefox or IE9 I am not directed to the user agreement page and therefore am not gaining access to the internet.Normally in the past once I had connected to the local network and opened my browser Comodo would open a warning window asking me if I wished to continue. This also is no longer happening as Comodo is not detecting me being connected to the internet, I'm sure.
View 2 Replies
View Related
Jan 6, 2012
I am trying come up with a setup that allows for a computer to simultaneously be connected to the web via a secure wireless network and to provide a shared drive via an unsecured (possibly ad hoc) wireless network.Which is to say, the computer needs to be able to use the web wirelessly via the secure network, and people need to be able to share files with it wirelessly whether or not THEY can use the secure wifi.One last requirement is that I need a this to be something that I can set up in a given location with no more configuration than required to connect to the secured wifi - if the setup requires me to mess around with the configuration of the router for the secure network itself, it won't work.
View 5 Replies
View Related
Feb 15, 2013
ASUS Notebook G60Vx Series
Windows 7 Home Premium 64-bit
Intel(R) WiFi Link 5100 AGN
A few days ago my internet suddenly stopped working. I plugged in the ethernet cord and everything worked fine. Checking the properties in the device manager showed the device was working properly, I also tried resetting it to make sure it was enabled but it did not work.
Upon troubleshooting, the "Windows Network Diagnostic" said the problems was that the Wireless adapter was not turned on. Using the switch on the front of the laptop as well as the function keys does nothing. Usually a graphic pops up showing if the WiFi is on or off, changinging transparent to show the WiFi is disabled. Now when I turn the switch on it always appears transparent, effectively going from off to off
So I know the computer reads both the function keys and the switch on the front but both methods never actually turns the adapter on. I just finished a system restore and nothing has changed
View 1 Replies
View Related
Jun 12, 2012
Today, while surfing the web my internet connection on my PC just randomly shuts off. I go check on my laptop and its normal. My WiFi says that I am connected to an Unidentified network with no internet access. So i got frustrated and checked all the forums and nothing seemed to work. So i restored my computer to factory settings and I still got this problem. Does this mean my Wifi Card is bad? Is it a virus? I can see other networks fine but i just cant connect to mine!
View 8 Replies
View Related
Feb 19, 2013
I have a issue where after configuring aaa and rebooting, logging into the console port seems to be auto trying something before it finally times out and let's the user try. I getting the following sequence: [code] I need aaa to work via vty, however I need the device to boot directly to the Username: prompt so I can continue to use my VB script to clear the config when the devices are return from the field.
View 4 Replies
View Related
Apr 2, 2013
One of our vendors requires using a public ip address to setup a site-to-site IPSEC vpn. We only have one public ip address and that will be used for the vpn endpoint and for internet access for the local network. I've setup policy NAT from our local network to the outside interface. I'm also using the outside ip address for the crypto map. The tunnel setups successfully and the Tx count increases anytime I try to ping the remote network, but the ping fails and the Rx count does not increase. According to our vendor, we should be able to ping the remote network and connect using port 443. When trying to connect using port 443, I see a SYN timeout in the logs. I'm not sure if the problem is on their end and they're rejecting our traffic, or if something is misconfigured on our end. I'd like to make sure that I have everything configured correctly before I go and point fingers at them.
Local Network - 10.10.9.0/24
Remote Network - 20.20.41.0/24
Remote Peer - 20.20.60.193
.ASA Version 8.2(5)
!
hostname ciscoasa
[code]....
View 4 Replies
View Related
Oct 18, 2011
I would like to find out if security plus license ASA-5505-sec-pl be applied to ASA5505-K8. I think the strength of encryption should not be determining whether additional feature can be applied or not, but I need to confirm with you people..
View 1 Replies
View Related
May 23, 2012
crypto map mapName 20 match address NAME_20_cryptomapcrypto map mapName 20 set peer IPADDRcrypto map mapName 20 set transform-set ESP-3DES-SHAcrypto map mapName interface IFNAMEcrypto isakmp identity addresscrypto isakmp enable IFNAMEcrypto isakmp policy 10authentication pre-shareencryption 3deshash md5group 2lifetime 86400crypto isakmp policy 30authentication pre-shareencryption 3deshash shagroup 2lifetime 86400crypto isakmp policy 50authentication pre-shareencryption aeshash shagroup 2lifetime 28800(code)
I need to be sure that when traffic matches access-list "NAME_40_cryptomap" Isakmp policy 50 are used. And then traffic matches "NAME_20_cryptomap" isakmp policy 10 are used. How do i link the crypto map with the specefic isakmp policy?
View 1 Replies
View Related
Nov 30, 2011
I encountered this problem with cisco 870 atm interface. I applied service-policy output, its being accepted but when you do a show run interface, it's not there.
View 5 Replies
View Related
Jul 10, 2011
i have an ASA 5520 8.4(1) setup as follows
public wan
|
|
ASA-- public dmz
|
|
private lan
i need to allow https traffic to a server in the DMZ that will have a routable IP address will just an ACL suffice ?which interface do i apply it to ? wan or dmz ?i dont need a NAT since the DMZ is a routable space?
View 6 Replies
View Related
Aug 1, 2012
I get that to avoid fragmenting the packets we need to reduce the MTU to 1492, fine, but should the MTU restriction be applied at the virtual-template (server)/dialer (client) or on the physical ethernet interfaces?If I apply it to one or the other, which takes precedence? Should I just apply it to both the virtual/dialer interfaces and the ethernet interfaces?
View 6 Replies
View Related
