For some reason I cannot connect to a local public wifi location that I frequent. It has really been a problem. Everyone around me connects no problem but I do not. I have no problem connecting to other locations.below is network environment.I have Mcafee and running windows 7. I use netgear modem and hawking 300n extender. [code]
View 3 RepliesI've got a dell n4110 windows 7.
For whatever reason I can't connect to public wifi (school, library, cafe, etc) but I am able to connect to my home wifi no problem.
I can see it, just can't connect (doesn't give an error message, just says unable to connect).
I am unable to connect public wifi since yesterday but its ok for company and home wifi.
View 2 Replies View RelatedAnyway, I have a Toshiba Satellite L645D-S4056 with Win7 Home Premium 64-bit. I've had it almost a year now and have never had trouble connecting to public wifi.Recently, I moved into a new apartment with free wifi and I seem to catch the signal from my apt even though it is poor. Every time I try to connect with my Toshiba it says, "Windows is unable to connect to 'linksys'." However, my husband's HP laptop and my old eMachines laptop (7yr old) (which I am using to research the problem) can connect with absolutely no issues. When I go to the clubhouse, my Toshiba can connect, however it cannot identify the network and does not receive an actual internet connection.
So far, I have uninstalled/reinstalled and updated my network adapter (Realtek RTL8188CE), I've used Command Prompt ipconfig /reset and ipconfig /release along with several other commands suggested to other wifi connection problemsI've checked my DHCP and DNS to ensure they're enabled.As for firewalls, I have turned off windows firewall and have disabled Kaspersky protection, however I have yet to uninstall and reinstall, this being because I can connect to a password prompted internet connection at work.I am unsure how to check my IP address or any of that
LT w/Windows 8 OS, still cannot connect to public access wifi. Ping test fails. Firewalls disabled. McAfee removed w/MCRP, no other virus software.
View 4 Replies View Relatedi have a acer laptop running windows 7 ultimate. I am unable to connect to public WiFi hotspots. But i m able to connetc to ad hocs and my mobile WiFi hotspot
View 2 Replies View RelatedI've got a Dell laptop with Windows 7 and I'm unable to connect to public wifi. I have a home wireless connection that I'm able to connect to, and I'm able to connect at friends houses. But when I try to connect at a local coffee shop, it doesn't work.
View 4 Replies View RelatedI'm using a Dell Vostro, running Win Vista with all updates. I have Trend Micro Titanium and Comodo Firewall. I primarily use Firefox (completely updated) but also have IE 9. Until a few days ago I regularly connected to various public WIFIs, by: connecting to the WIFI network, opening Firefox which would then automatically take me the network's (Panera for example) user agreement page, clicking on "I accept" or "I agree" then gaining access to the internet. Two days ago I was at a local establishment where I have connected before. I connected to their network and opened Firefox as usual. Instead of connecting to their user agreement page as usual, Firefox tried to connect to my homepage (Washington Post) and failed.
The network icon in the sys tray showed I was connected to the local network but with local access only. This has now happened three times in three different public locations over the past 2 days. Each time I've successfully connect to the network but when opening Firefox or IE9 I am not directed to the user agreement page and therefore am not gaining access to the internet.Normally in the past once I had connected to the local network and opened my browser Comodo would open a warning window asking me if I wished to continue. This also is no longer happening as Comodo is not detecting me being connected to the internet, I'm sure.
New Dell laptop w/Windows 8 OS. Cannot access wifi in local cafAt network & sharing center - Access Type: No Internet Access - Getting full signalHave McAfee Antivirus Plus installedHad this problem before and completely uninstalled/reinstalled McAfee. Problem was solved temporarily
View 5 Replies View RelatedI am able to connect perfectly at home but no longer in public areas such as Starbucks, etc. I do not get the public website to agree to the terms and connections. My laptop tries to connect to my homepage and skips the log on page then freezes and I receive an error message that there is no internet connection. When I go to "Data Sharing Center" it states that I am connected.
View 1 Replies View RelatedI like to create a village-wide wifi network...The purpose is to provide a public service so although we'd have to charge to cover capital and operating costs but the purpose would be to run it on a non-profit basis. If it does by chance make a profit it would be donated to local community projects so we should be able to get support from local business and residents if the technical solution requires their collaboration.
View 1 Replies View RelatedIs there any reason why when my fiance' in australia connects to a public network at mcdonald's that he can't log into msn, facebook, or thunderbird?
View 2 Replies View RelatedWill my Kindle be able to access public WIFI as in a WIFI enabled train or bus.
View 1 Replies View RelatedI always get connected with no problems, then as soon as I try to do anything (check e mail goole something) I get disconnected either there is no internet access or no network access. I've tried different firewalls and using chrome browser rather than explorer,but the problem persists.
View 1 Replies View RelatedSo there are two VLAN's traveling over the port attached to the controller (User vlan 100, and Guest vlan 102). I need to block the guest from everything but the internet allowing the free flow of everything else on the User vlan. All info sanitized of course.I think I have the ACL's correct for what I am trying to accomplish I just can not get this ACL to work on a trunk port.Confirmed the ACL to work correctly on access ports however.
ip access-list extended Wireless
permit ip 172.100.0.0 0.0.255.255 any
permit udp any any eq bootpc
permit udp any any eq bootps
permit udp any any eq domain[code].....
I just moved into an apartment where the internet is being provided to me via wifi (open). The landlord doesn't have a private network, he is with me. What I'm was curious about is if it is possible for me to use a second router to create a secured network for all my devices? My thought would look like this: ISP>Landlords Router>wireless>MyRouter. I know you can have private and public wifi but the two routers have to be connected. I haven't talked to him about the fact that he needs to secure his router mainly because we never cross paths.
View 6 Replies View Relatedi have angels online installed in my laptop and now i'm in the hospital and i'm trying to use angels online, i was able to update the new patch for the games which shows that the internet works but when i try to connect to any of the servers it says that the connection to the server failed. how do i get my online game to work with the public internet?
View 1 Replies View RelatedI live near several public hit spots. A geek told me I could configure my PC (XP) or laptop (Win 7) to act as a wifi receiver and connect that to my wireless router to distribute the Internet connection to my Blue-ray and other laptops. I can't figure out the correct steps to make it work.
View 8 Replies View RelatedI work at a Public Safety building in Pennsylvania and our employees here share a Wifi connection with a local hospital facility that is in a industrial park behind us. The room we work in is able to access the Public Wifi but only half of the room has a good connection. I went to the local computer store and purchased a Belkin Dual-band wireless Range Extender and got it all set up, now I have the Public Wifi Extention access and it will connect to it but it has no internet access. Now we have no access to the administor or the network from our facility. How do i get internet access thru this range extender? If i connect from the good half of the room to the Public wifi i have a good connection with internet access but as soon as you put it thru the extender no more internet access.
View 1 Replies View RelatedI am trying come up with a setup that allows for a computer to simultaneously be connected to the web via a secure wireless network and to provide a shared drive via an unsecured (possibly ad hoc) wireless network.Which is to say, the computer needs to be able to use the web wirelessly via the secure network, and people need to be able to share files with it wirelessly whether or not THEY can use the secure wifi.One last requirement is that I need a this to be something that I can set up in a given location with no more configuration than required to connect to the secured wifi - if the setup requires me to mess around with the configuration of the router for the secure network itself, it won't work.
View 5 Replies View RelatedOne of our vendors requires using a public ip address to setup a site-to-site IPSEC vpn. We only have one public ip address and that will be used for the vpn endpoint and for internet access for the local network. I've setup policy NAT from our local network to the outside interface. I'm also using the outside ip address for the crypto map. The tunnel setups successfully and the Tx count increases anytime I try to ping the remote network, but the ping fails and the Rx count does not increase. According to our vendor, we should be able to ping the remote network and connect using port 443. When trying to connect using port 443, I see a SYN timeout in the logs. I'm not sure if the problem is on their end and they're rejecting our traffic, or if something is misconfigured on our end. I'd like to make sure that I have everything configured correctly before I go and point fingers at them.
Local Network - 10.10.9.0/24
Remote Network - 20.20.41.0/24
Remote Peer - 20.20.60.193
.ASA Version 8.2(5)
!
hostname ciscoasa
[code]....
At home, I use my laptop to connect to my wireless router without any trouble.But at: public libraries, Starbucks, hotel rooms... any free public wifi? All attempts to connect meets with the same error: "unable to connect to network" (preceded by the system hanging for a lengthy amount of time). Windows advises me to unplug the router and plug it back in, which obviously isn't an option.It's annoying to troubleshoot, because I'm only having the problem at times where I have no wired access (hence: no way to get to forums like these and look for an answer, update drivers, whatever).
View 6 Replies View RelatedI have a user that is in a hotel with a Windows 7 laptop. He is connected to the hotel's public network and it is set as a public network in windows network and sharing center.Usually from home, which is a private network, he can log onto our VPN and then use Remote Desktop to control his work computer (which is Windows XP) here at the office; however, from this hotel, he can still connect to the VPN and access shared drives and all, but he cannot connect to any computer using remote desktop.I've tried everything, allowing remote connections for public in the firewall, even changed the network from public to private and he still cannot connect. Still, he can connect just fine from home.
View 1 Replies View RelatedI've a problem with Cisco RV082. I want to connect to my public IP from local IP. But it seems it's been block by the firewall.I've added a firewall rules to allow ANY connection from LAN to outside world. But has no effect.
LAN IP : 192.168.1.5.Public IP (which is assigned to LAN IP 192.168.1.5 by One-to-One NAT) : 118.xxx.xxx.xxx
i have an ASA 5520 8.4(1) setup as follows
public wan
|
|
ASA-- public dmz
|
|
private lan
i need to allow https traffic to a server in the DMZ that will have a routable IP address will just an ACL suffice ?which interface do i apply it to ? wan or dmz ?i dont need a NAT since the DMZ is a routable space?
I have set up several types of servers on my computer (ftp, game servers, web servers, etc).
I have had a problem with people connecting to any of my servers. I know for a fact I have port forwarded correctly (I have checked 12 times, and I have never had a problem port forwarding). I know it's not my firewall, the problem persists when I completely shut it down.
I had an ftp and web server working about a week ago. No one can connect to any server, be it ftp...web...etc.
My router is a Netgear WNR2000v2
I hava ASA5510. INSIDE,DMZ and OUTSIDE interfaces are configured. I hava web server on DMZ ip:10.0.0.1 and it is static natted to 1.1.1.1. From internet i can reach to web server with IP:1.1.1.1 and from INSIDE connect to web server with IP:10.0.0.1. Now i want to connect from INSIDE to WEB server via public IP(1.1.1.1).how can configure it?
View 2 Replies View RelatedI have an aironet 1242, It must be connect to an DSL using a static Public IP, and this AP must provide dhcp services, how to configure this access point in order to be connected to Internet using Public IP and provide dhcp service.
View 4 Replies View RelatedI can't connect to the public weater site NOAA.gov, and weather.gov, but have no problem connecting to any other sites, private of public.WRT54Gv6 wireless with v1.02.08 (Oct 5, 2009) firmware..the latest.3 devices, desktop, laptop, and iPad......none of which can connect to NOAA or weather.gov Government websites are up when I tried to connect.I've connected to these sites for years, and as recently as yesterday.Linksys BEFCMU10 cable modem. This blows my mind, since the 3 device all have different OS's, browsers, AV software. The only thing in common in the network is the modem and wireless router. Why only the two .gov sites cannot connect?
View 9 Replies View RelatedI have an ASA 5505 configured with internal network, a DMZ, and a VPN on seperate subnets. The implicit rules allow my internal client computers to connect to the web servers on the DMZ IP, but I can not connect to the public NAT address from the internal network. I have a DNS server on my internal network and it does resolve to the public IP correctly. NAT seems to be working correctly because if I go outside the network and connect to the public IP or qualified name then I can get to everything correctly. I do not see any messages in the Cisco logs and the packet trace tool shows the route of http from an internal IP adddress to the external (NATed) address is allowed.
Specifically, I can go to http://192.168.1.121 from the internal (192.168.0/24) network, but I can not go to http://72.22.214.121 (the NAT address) from the internal network. If I am outside my cisco then I can go to http://72.22.214.121 easily. [code]
In my device I am able to browse through & connect to my HOME wifi network ; But after connecting it says 'No Internet Access'.I tried connecting with my SONY Bluray , iphone , ipad , laptops -- everywhere same story.I am able to plug in the ethernet cable directly from modem & able to connect to network.I am not able to open the http://192.168.0.1 -- ( When I am plugged in the modem directly)
Following are my router details
FCCID - KA2DIR601A1
IC : 4216A-IR601
H/W Ver:A1
F.W Ver:1.00 NA
when i connect my sylvania netbook to my wireless internet it says connected, excellent signal but when i try to pull up a web page it says can not connect to server...
View 1 Replies View RelatedAny way to connect a wifi usb to a wireless router for better wifi connect?? i have wifi but it only gets in the room of the house im in and want it to work though out the house not just one room
View 1 Replies View Related