Distribute Powerpoint Presentation To 8 TV In Building?
Jul 8, 2012have coax and 2 cat 6 cables to 8 tv's and want to view a presentation at all 8 tv'spower point to all
View 1 Replies
ADVERTISEMENT
Broadband :: Unable To Have An Icon Of Any PowerPoint Document?
Oct 29, 2012I do not have an icon of any power-point document what do i do?
View 1 Replies View RelatedCisco :: CDR Application Which Will Allow User - Friendly Presentation Of CDR Records
May 22, 2012Can anyone recomend a CDR application which will allow user-friendly presentation of the CDR records and to be saved historically. I see there are a good number out there but not having used any I am hoping someone has some first hand experience with them. I'm going to see about giving this a go url... for my CUCME system to see how it is. Basic call tracking is all that is really needed. Email reports and costing is an added bonus.
View 1 Replies View RelatedDistribute 4 ISP In Single Network?
Nov 7, 2012
I've 4 ISP in my office. In my network all the machines are connected through unmanaged switches.Now if I need to shift any one machine to other ISP then I need to change his IP.Is the following possible:
I connect all the four ISP's to a machine(say Server), then I take out a wire and connect it to the switch so that I can distribute all the ISP into the network.Now on the basis of the MAC Address I can change the assign any ISP to any of the other machine in the network.Also is it possible that I can monitor their data usage as well as can CAP there bandwidth.
How To Re-distribute My Cabled Internet To A Router
Aug 17, 2011I am wondering if I can re-distribute my cabled Internet (part of a LAN) to a separate network via a router? Well I tried to connect the ethernet cable from which I access the internet to the Fa port of a router and then tried to share the internet creating NAT pool in the router. I am not successful.
View 4 Replies View RelatedCisco :: 4402 - How To Distribute SSID To Only Few AP's
Nov 12, 2012we have a 4402 controller with sw 7.0.116 and a wcs with sw 7.0.172.
We have to create a new wireless network, and would like to send the ssid to only one AP. Is this possible ?
Cisco :: Difference Between Prefix And Distribute List?
Oct 23, 2011Difference between prefix-list and distribute list?
View 6 Replies View RelatedUsing Swc 5100wn Router To Distribute Broadband Connection?
Oct 22, 2011Wimax CPE,,Model SWC 5100 WN .,wifi availeble, i need this to connect to my adsl broadband connection and share it by wi-fi.,already this includes network call mobiley.
View 1 Replies View RelatedCisco Application :: ACE 4710 To Distribute A Pac File
Mar 19, 2012I need to use the Ace 4710 to distribute a Proxy PAC file, e.g. [URL] which will be configured in client browser using an AD group policy. Is it possible for the ACE to host and serve a file in this way?
View 3 Replies View RelatedHow To Distribute Bandwidth In Tenda Adsl Router For 2 Users
Oct 12, 2011i have tenda ADSL router using the internet of Nepal Telecom, Nepal and distributed to two users. now i want to limit the speed of the other user to least and i want to achive maximum speed of the subscription but have no idea to manage it
View 1 Replies View RelatedCisco WAN :: Nexus 7K Ospf Summary Router Distribute
Feb 28, 2012I have a Nexus 7K router, has 2 ospf process, ospf 1 and ospf2. OSPF1 has several subnets in 10.1.0.0/16 subnet range , OSPF2 has several subnets in 10.2.0.0/16 subnet range. I want to summary OSPF 1 subnets to 10.1.0.0/16 then redistribute to OSPF2. but it doesn't work. [code]
View 2 Replies View RelatedCisco :: C3560 - SWIM1164 / Image Distribute To Device Failed
Apr 7, 2011I am trying image distribution to a c3560 device but I always get the error message SWIM1164. In the documentation it says to copy the logs and open a TAC Case but I would like to do some troubleshooting myself before opening a case.
Some actions to be taken prior to opening a case?
[code]...
Cisco Switching/Routing :: Create A Route-map For An EIGRP Distribute List On A N7K?
Apr 26, 2012I'm trying to create a route-map for an EIGRP Distribute list on a N7K, the goal is to not advertise a 10.0.0.0/8 and 172.31.30.20/32 networks out a link to a remote site while permitting all other traffic to the internet (default). I configured the ACL/route-maps below and applied them outbound on the N7K interface but no subnets at all are being received on the remote site router.
ip access-list DENY_10.0.0.0
10 permit ip any 10.244.244.20/30 <<--WAN interface network
20 deny ip any 10.0.0.0/8
25 deny ip any 172.31.30.20/32
30 permit ip any any
[code]....
Cisco Switching/Routing :: 3750 - How To Distribute Static Route Via OSPF
Mar 26, 2013We have a 14 offfice MPLS network. All offices have Cisco 3750s running OSPF which replicate route tables via our providers BGP peers. I am introducing a new network in our SF office which is not directly connected so in SF we have a static route "ip route 172.16.20.0 255.255.255.0 192.168.100.1. I want our other offices to learn this route route via OSPF so that they know how to get to the new network. My problem is that of course remote sites do not see our static routes and i have tried to add this via ospf but the switch will not propagate this route because it is not directly connected to the switch in SF.
router ospf 1
log-adjacency-changes
network 10.2.0.0 0.0.0.255 area 2.2.2.2
[Code]......
Dual-band 3602s Connected To Controller - Distribute Load Across Radios And Spectrum
Apr 17, 2012I'm setting up a Cisco wireless mesh. The APs are all dual-band 3602s connected to a controller. So, let's say I'm broadcasting both 2.4 and 5.1GHz at the same time for the same SSID. Which frequency does a wireless client connect through, assuming the client supports both? Is there a way to default to one (say 5.1GHz) then fall back to the other, or is it strictly a matter of signal strength? (In which case, from the testing I've done, 2.4GHz almost always has a stronger signal strength.)
Or, should I broadcast separate networks (e.g. "work-network24" vs "work-network51") and manually authenticate/authorize against the appropriate band based on how I want to distribute load across the radios and spectrum?
Cisco Switching/Routing :: 65535-BGP Distribute List Blocking Routers / Configuration Does Not Work?
Jan 17, 2013Why the below configuration does not work? BGP exchanges routes without a problem all the time the distribute list is removed from the config. When I apply the distribute list it blocks all routes, not just those intended in the prefix list.
[CODE]....
Cisco Routers :: RVS4000 Distribute A Search Domain In Addition To IP Address / DNS Server Information
Feb 29, 2012I have just installed and configured a new RVS4000 with VPN (currently running firmware V2.0.0.3), and have enabled the DHCP Server service. I wanted to be able to distribute a search domain in addition to the IP address and DNS Server information (as I have done with other devices that include a DHCP Server), but cannot seem to locate where or how I might do that with the RVS4000.
View 4 Replies View RelatedCreate VPN From One To Another Building?
Apr 24, 2012I have in one building a computer which has a real ip using and i want to connect to that building not via teamviewer or bomgar i wish to use VPN, how do i configure it? And why it is better using VPN?
View 2 Replies View RelatedBuilding A Firewall From Scratch Using C?
Jun 30, 2011I am trying to develop a firewall from scratch in linux environment using C. Actually its more of a Unified Threat Management sysytem .which features to include like antispam, content filtering, vulnerability analyzing,etc.I have exactly 1 year to complete this project which features can be coded completely in time. Actually I have broken the process of development in 4 stages namely :
1. Capture the packet (using libcap)
2. Break the packet into headers and data (using libpcap)
3. Analyze the headers and data and make a decision
4. ACCEPT or DROP the packet
Its the third step that will depend on the features which are included in the project. I plan to code using the UNIX Socket API.
Laptop Won't Connect To Wi- Fi In Certain Building?
Jan 16, 2013Alright, so I have a Dell xps 12 running windows 8.On my school's campus, there are two wifi options. One is secure with a login, the other is unsecured but with a Web login. Normally I connect to the secure one and have no problem.
However, in one building I've encountered issues connecting. My computer will pick up the signal for both options (and says there is strong signal) , then try to connect to the secure one. It will say "connection is taking longer than usual" and then fail to connect, then say no networks available. I tried resetting the network adapters and it picks up the signal again for a moment, try to connect, and then same problem again.
I can see other people in the room connected to the Internet with no issue. My phone also connects with no problems, and has full signal. I have no idea why my computer won't connect.
Trying To Add A Building To Our Home Network
Mar 25, 2013I have a 4g home system from verizon in my house with a wireless roughter all works. Are printers are on the network. I have run a cat5 underground eithernet cable to a poll barn that is about 200 feet from my house. (the house network will not reach that far). My wife wants her barn to be wi fi (she does not want to plug in to the wall of the barn. I was told I need a Hub. but i am not sure what i need.The idea is she could print to the printer in the house or in the barn so i want all to be on one network.
View 3 Replies View RelatedMultistory Building LAN Using Open It?
May 10, 2012This lab teaches the application performance of two different networkarchitectures: Daisy Chain and Collapsed Backbone Network. The bookshows a collapsed backbone data network in which there is a core switch inthe basement equipment room. The core switch is linked directly to aworkgroup switch on each floor. Another option is to link the switches in adaisy chain. In this approach, the basement core switch is linked directly tothe first floor switch, the first floor switch is linked directly to the second floorswitch, and so forth.This lab shows the application latency introduced by connecting buildingswitches in different ways.
OverviewOperations building has 10 floors, each havingmany users connected to a 10Base-T workgroup switch in the telecommunications closet. The users share an Oracle server and seven fileand print servers in the basement.In Scenario 1, the switches on each floor are daisy chained to the core switchin the basement. We will see that this daisy chain approach introduces highapplication latency to users on the highest floor.In Scenario 2, the daisy chain topology is retained, but the core switch ismoved to the fifth floor. We will see that this reduces latency on the highestfloor but increases it on the bottom floor.In Scenario 3, the core switch is kept in the basement, but ollapsedbackbonetopology is used, in which the core switch in the basement is linked directly to the workgroup switch on each floor.
Several users are connected to a switch on each of the 10 floors. The share an Oracle server and 7 File, Print, and Email servers in the basement.The users on different floors are running a 2 Tier Oracle application. We willstudy the performance of this application.And showed me the error message in pictures (3) I asked the doctor and she told me to change the Switch name (located in the red box in picture) but still error constant I think the error is due to the type of Switch (core switch) or the type of link between the (core switch) and (7 File Print & Email Ervers)
Implementing / Planning / Building A LAN
Mar 25, 2012I have to propose/design a network system. It has 350 computer terminals/workstations out of which 300 of them are divided into two separate networks while the other 50 are to be on another network. So I assume I'd need 3 networks (or LANs) I guess (all connected ofcourse)So far I've inferred it needs a mail server, a file server, a print server, a DHCP server to assign IP addresses (C class and private ones ofcourse) and a web proxy server. Also I thought a fast Ethernet LAN network might be ideal here but I'm not quite sure on that (nor have I ascertained what sort of topology or hardware to use).
View 5 Replies View RelatedCisco :: LMS 4.1 / Building DSN For UPM Database?
Jan 26, 2012I need to generate an ODBC connection to the upm Datasource on LMS 4.1 running on Win2K8. I have successfully built connections to cmf, ipm and rmeng, however UPM keeps failing saying that the Database is not found.
Here are my settings.
Driver = CiscoWorks Embedded Database
ODBC Tab - Data source name = upm
ODBC Tab - Description = Device Performance
Login Tab - Supply user ID and Password is selcted
Login Tab - User ID = lmsdatafeed (i have tried DBA as well)
Login Tab - Password = set using the password I estabplished with the dbaccess.pl and dbpasswd.pl scripts
Database.Server name = upmEng
Network.TCP/IP = HOST=<lms server ip>;DOBROADCAST=NO;ServerPort= 43800
I validated the server port using netstat -a -b -o and matching up the PID with the UPMDBEngine process shown in the LMS Manage Processes window.Windows firewalls on the remote machine and the LMS server are off.
Wireless :: Get Wifi Into Steel Building?
Feb 3, 2011I have a cradlepoint ctr350 router. I have a steel building garage abou 75 ft. away from where the router is stationed. I have no problem getting a good signal at the doorstep of the steel building, but once inside I have nothing. What would be the best way for me to get wifi inside of the steel building without having to run a hard line?
View 7 Replies View RelatedBuilding A Server For Minecraft And Ventrilo?
Apr 9, 2012I'm looking into building a server for Minecraft and Ventrilo and have some questions.Should I build from scratch?If so, what parts are most important? Will I be able to run both things on one server?
View 6 Replies View RelatedLaptop Will Not Connect To Building's Router
Sep 30, 2012I have Windows 7 with an Intel Centrino Advanced-N 6200 Network Adapter. It can be picky about what routers it connects to but usually it stops being stubborn after a few minutes. Now it won't connect to my building's internet (while my other computer and devices can). My laptop can access any other wifi and internet. Sometimes it can connect to the WIFI but gets no internet and sometimes I cannot connect to the WiFi at all.
1. Sometimes I'm able to connect to router and just not have internet. Sometimes I can't connect at all.
2. I deleted network profile multiple times. Made no difference.
3. Disabled network adapter and re-enabled - Didn't work
4. Updated Net Adapt driver. - Nope
5. Anytime I connect to router the security is set incorrectly to WEP. Troubleshooting tells me to adjust this which I did to WPA2-Personal. Still still couldn't access internet.
6. Tried to ipconfig /renew and ipconfig /release in cmd but says "no operation can be performed on wireless network connection while it has its media disconnected" - so nope
7. Tried a se[erate USB network adapter - No difference. This actually surprised me, I figured it must be my Intel 6200 but alas it isn't.
My biggest hurdle is I cannot access the router. I have to figure this out on my laptop and I have no Ethernet chord ability either. Every forum post I read about wifi issues people always tinker with their router and it fixes it.
Building A Wireless Network For 130+ Users?
Apr 8, 2011designing a wireless network for an apartment complex. The complex is shaped like like an rectangle, fairly small, maybe 100 feet on the ends and 300 feet long on the sides. There are 130 people that we are assuming may have about 3 devices each that they will connect to the wireless network, potentially simultaneously, as this is in a college environment. We have plenty of bandwidth and down/up speed. We are running 30 megabit down and 10 up. I am planning on having a router with two access points centrally located in an apartment and extending the network out with antennas in each direction from the access points with Omni directional antennas. The Access points that I am planning on using are Cisco WAP200 with maybe a Linksys router, as the router should not have more than 10 connections on it. I need something that will not crash after 10-15 users connect to it because it jams up from overload.
View 3 Replies View RelatedWhole Building Wants To Share The Internet Connection?
Mar 9, 2011I am a novice to networking. I have a Internet Modem in the basement and two floors of computers. Each floor has its own wired ethernet network that has one wire in the middle of the network reaching down to the basement. The whole building wants to share the internet connection.What devices do you suggest for the basement and for each "hub" on the other floors?Originally we planned to put a router in the basement and share a wifi signal and put an ethernet switch on each floor. But the wifi in the basement has less range than placing the wifi on the top floor. I was contemplating puting a wired router in the basement and a wireless router on the top floor. Will that work?If not we could have wireless routers on each floor, but will they cause interference with each other?Can one be set in the basement to operate on one channel, while the other set on the top floor to operate on another channel?
View 2 Replies View RelatedCisco WAN :: 4506-E / Routing Two Building Together?
Aug 13, 2012I am in the process to route two buildings together. Both building have the same network setup. 2 Core Switches 4506-E Chassis having glbp for layer 3 redundency on about 20 vlan in each building with default intervlan routing in place.Below is a simple sketch of how these are connected. Blue lines are still not connected...
What I need is to setup routing onto the blue fibre links so that networks from building 1 can reach networks on building to and vias versa. I would also need to implement some sort of redundency since I have to fibre links between the 2 building.
Cisco :: Building A Multi Site Network?
Jan 18, 2013I wish to build a test rig in my office that will act as 2 separate geographic locations with a router at each location connecting to a make believe MPLS kind of network. I then wish for these sites to communicate with each other but obviously be on separate IP ranges .I know each site would have a router and I assume that there ideally should be 2 corresponding (provider) routers on the MPLS network. What I do not know is how the the routers at each site should connect physically to its partner router at the MPLS and also how the two MPLS routers would connect together. For example, if I wanted to later scale up to have 4 geographical sites how would the 4 MPLS routers connect together (using a switch?)?
View 5 Replies View RelatedCisco :: Building GRE Tunnel To Switch Cluster?
Aug 27, 2011I have a cluster of three layer three switches. Is it possible to build just one IPsec/GRE tunnel to the entire switch cluster or will I have to build an independent tunnel for each switch? I'm pretty sure you can't terminate GRE to an HSRP address, and I think that's the only way to build routing redundancy into a switch cluster.
View 2 Replies View RelatedNo Internet Connection At Home But Can Connect In Different Building
Jan 14, 2013We had 2 laptops and a pc working through a router with no internet problems. My wife's Toshiba laptop had other problems so IT guy at the college where I teach did a clean install of XP and checked the machine in his office, including internet. No problem. Brought machine home and no internet connection. My laptop works fine on wife's cable to the router. Wife's Toshiba has wireless but cannot establish connection with wire.Another tech guy who lives above us took the laptop up to his place - no connection. Back in the office (different building)- connection. The IT men are baffled. Me too.
View 5 Replies View Related
