Cisco :: CDR Application Which Will Allow User - Friendly Presentation Of CDR Records
May 22, 2012
Can anyone recomend a CDR application which will allow user-friendly presentation of the CDR records and to be saved historically. I see there are a good number out there but not having used any I am hoping someone has some first hand experience with them. I'm going to see about giving this a go url... for my CUCME system to see how it is. Basic call tracking is all that is really needed. Email reports and costing is an added bonus.
View 1 Replies
ADVERTISEMENT
Nov 29, 2011
I want to export the ACS local user's records.Then import to other ACS5.3 server.But the export file not the user's password record.I cannot import it well....
View 1 Replies
View Related
Jul 8, 2012
have coax and 2 cat 6 cables to 8 tv's and want to view a presentation at all 8 tv'spower point to all
View 1 Replies
View Related
Aug 31, 2011
Using an ACE 4710 we have a user setup with the Network-Monitor role which allows the user to view config, interface status, etc. We would also like to allow this user to clear the interface error counters as well, but nothing else.
View 2 Replies
View Related
May 26, 2013
Following best practices on cisco documentations we did set aaa acounting update periodic 5 with 250 switches in the deployment every single switch is geneating and sending 9.990 acct records this is too much the new testing parameterswe are using is aaa acounting update newinfo periodic 15 and this lowered accts by 2/3 (3500) moreover from switch monitoring the most accts records sent by it are related to the trunk-port any suggestion to mitigate this informations storm rather than raising the 15 min period to higher values?are this records generating from the trunk port normal?
View 1 Replies
View Related
Jan 12, 2011
ACE 4710 TACACS issues ,How to setup user with Admin context access permission. I have enable the TACACS and it can directly put me in Context mode not in Admin Context mode .
View 8 Replies
View Related
May 26, 2011
I do not see any start records in Radius Accounting reports but do see only Stop records ?
btw I am running ACS 5.2
View 2 Replies
View Related
Jul 31, 2012
LMS 4.2.1 W2K8 R2
I seem to be unable to generate a syslog report that contains > 10,000 records. And I don't mean with run type immediate either. I am scheduling them to run at the next 5 minute interval (incidentally, why not have an option that just says "run in background now"?)
I am facing an issue where a bunch of errors are being generated by a voice gateway and I want to determine when the problem started. My syslog contains 7 days of records. If I schedule a report to give me all syslog records for the last 1 week (or 7 days I have tried it both ways) for all devices at that location I get 10,000 records, and they are all for the current date. If I schedule a report and select a date range in the past, I get records within that date range, but only 10,000.
View 2 Replies
View Related
Jun 19, 2011
I have a VPN connection to my office network. The VPN connection appears to work fine as it connects and logs me in successfully. In the connection box I have to provide a domain and my username to log in. Once the VPN is connected I am then able to ping my office computer as if I was on the same network. That is great. The problem is that there is a server on that network that defines a bunch of A records for web applications we are working on and I can't seem to hit any of those from my home computer, even though I can at work. If I remote into the office PC and navigate to these addresses they work fine. I also know that my co-worker can hit these a records from home so it has to be something I'm doing wrong.
[Code]....
View 2 Replies
View Related
Sep 22, 2011
We are running ACS 5.2 patch 6 and want to restrict access for users to be able to add devices to the system.For example, admin person in site A can only add devices into the site A group and cannot see/access other sites groups.
View 1 Replies
View Related
Apr 20, 2009
We are using an ASA 5510 and remote access (SSL VPN) using the AnyConnect client.
Is it possible to display a user message when a user connects using the AnyConnect client, matching a specific dynamic access policy? Can the message be displayed when the action is "Continue" rather than "Terminate"? I can't seem to get this to work and wondered if there was a LUA function to do this.
We have a DAP which gives a restricted ACL when the user's anti-virus is out of date, and I wanted to notify the user to update their anti-virus and reconnect.
View 4 Replies
View Related
Oct 10, 2011
I want to create a local user in my Cisco ASA 5520 to allow the user to use the ASDM in Read-Only mode. I want the user to view the Dashboard only.
View 1 Replies
View Related
Nov 21, 2012
Is it configurable to allow wifi user to user traffic on WLC 5508?
View 4 Replies
View Related
Dec 3, 2012
Everytime I make a config change to one of the contexts on our ACE20, I get this message: Config Application in Progress. This command is queued to the system
If I run show download info, I get:
context : context1
Interface Download-status
--------------------------------------------------------------
187 In Progress
199 Pending
Regex download optimization status : Couldn't get status[TNRPC Timed out]
It eventually seems to complete, but it takes a very, very long time. We are running Version A2(3.5) [build 3.0(0)A2(3.5)].
View 2 Replies
View Related
Mar 27, 2013
Report run via Individual Web server URL’sThe report takes less than 20 minutes (average 15 minutes) to fetch and return the data. This is observed 9 out of 10 times.Report run via ACE Load Balanced URLThe report keeps on running for more than 20 minutes and never completes. The front end keeps showing report is running.The data in general when tested directly by running queries against the database (bypassing the platform) completes in 15-18 minutesThe network connectivity for each and every ports involved (Loadbalancer/Servers) have been throulgly checked.
View 6 Replies
View Related
Apr 3, 2012
I am taking an introduction class to CCNA and we are focusing on the Application Layer,and I'm having some difficulty in understanding what is an Application Layer Service. Is the Application Layer Service the same as Application Layer Software?
View 3 Replies
View Related
Dec 1, 2011
I was wondering if it is possible to track and or log the changes that users make in in LMS 4.1. For an example if someone changed a configuration I want that being logged. I want to see what the person changed, when it's changed and who changed it.
View 2 Replies
View Related
Dec 27, 2011
what is the best way to do a acquistion on ip address on devices that appear to be dead until ping before LMS4.1 reports onn them. For example we run acquistion on a branch we do not see 172.20.12.51, howver we ping it from my desktop Claims unplugged when plugged in, and says "safe to remove" when I unplug the cableand then run user tracking and then it shows up.
View 1 Replies
View Related
Jul 1, 2011
I'm creating a forms section on our intranet, I want to be able to link direct to specific forms so that it opens immediately. Currently all our forms are MS Word templates that you access by opening MS Word and navigating to the template that is stored on the c drive which staff cannot access directly from their pc's as it is 'locked down'.Now... I can create a url that opens the form directly (i.e. without needing to open Word and navigate to the form template) however that url contains a userid e.g. c://programfiles/word/my-userid/leave-form.doc I obvious cannot use such a url on our intranet to link directly to a form because only I would be able to open the form as it is my userid!
View 1 Replies
View Related
Jun 25, 2011
Where can I download the user manaul for this switch, not the quick start guide?
View 1 Replies
View Related
Mar 4, 2013
possible in Cisco Prime 4.2, to kick off a particular user? in GUI or CLI ?
View 0 Replies
View Related
Apr 5, 2011
We are changing our old Pix 515e this weekend and for brand new ASA 5510.With this new installation, I would like to implement the Radius authentication for remote vpn user. Changing the firewall of the company has many impact and for the first phase the user will keep authenticating locally but I need that in phase 2, they will be authenticated via a radius server.Is there a way to configure both authentication for remote vpn user?
All user will be authenticated locally except the member of the IT Department who will be authenticated by the radius server for testing.I have remote vpn users around the world so I do not want these users to be blocked by the testing of the radius authentication. What I want is that users in group1 will be authenticated locally on the ASA and users in group2 will be authenticated by the radius. When testing will be done, all users will be transfer to the radius authentication gradually.
View 1 Replies
View Related
Sep 1, 2011
I am trying to determine why hosts off our Nexus 7010s are being picked up in UT. Since LMS 4.0.1, UT should be supported on these devices.When adding the Nexus devices to DCR, provide the netadmin SNMP RO credential.When other SNMP RO credential is provided, user tracking will not collect end host data.I think I have this setup correctly as the device center test passes when cehcking snmp ro credentials.Our 7010s are running NX-OS 5.0(3) - earlier than the recommended version - might that cause issues? We are not using VRFs other than the default and management.
Here is my snmp section:
sh run | sec snmp
ip access-list copp-system-acl-snmp
10 permit udp any any eq snmp
10 permit udp any any eq snmp
20 permit udp any any eq snmptrap
[code]....
View 12 Replies
View Related
Apr 5, 2011
We are running two ACS appliances but we cannot figure out how we can add a user into 2 differents groups.Here's the context :We have a company A which is having devices, this company uses Group A.then we have a company B which is having devices, this company uses Group B.But the admin has to manage the devices for both companies A & B.We don't want to mix devices from company A with company B.Is there a way to add the user into both groups A & B.
View 5 Replies
View Related
Mar 5, 2013
I have an ASA 5505 that is hosting a SSL VPN. The user can not login. They receive login error. To the best of their knowledge, this problem started after the office Domain Controller was rebuilt. I have looked on ASA and in AD and cannot seem to trace the issue.
View 9 Replies
View Related
May 21, 2012
I have a question about ACS 5.3 and ASA VPN profile authorization. I am not sure if it is possible to allow one single user for a set of VPN profiles on ASA, let's make an example:ACS 5.3 group hierarchy:VPN users global should have access to VPN profiles A, B and Z (here we create an authorization profile with no class an no lock attributes, so the group is allowed for all VPN profiles),VPN users A should have access to VPN profile A (here we create a authorization profile with class and lock attributes for profile A),VPN users B should have access to VPN profiles B and Z (is this possible and how does the authorization profile have to look like?)
View 3 Replies
View Related
Nov 27, 2011
in LMS 4.1, under Monitor->Identity Dashboard, i have "user tracking summary" as a portlet, which tells me i have ~ 17,000 users. when i click the report, it pops up a screen that shows mac address, ip address, hostname, subnet, etc.
If i try to do ANY filtering, it returns 0 records. this could be from a specific IP, mac address, device name, or subnet. i have tried every type of record. every filter i attempt always ends with 0 records returned, even though in the unfiltered list they show up. It would be problematic to manually sort through 17,000 users looking for the particular records i need without the ability to use the filter.
how to filter the User Tracking report? is there some feature in LMS i don't own or have enabled to allow this filtering?
View 3 Replies
View Related
Jan 5, 2013
what is the maximum user IDs that I can create to the ACS server? The client have an ACS appliance with version 5.2.
View 2 Replies
View Related
Feb 16, 2011
We are running Cisco Wireless Control Sytem (v7.0.164.0) with 4 - WLCs (v5.2.193.0) and about a 100 Aironets and I was wondering how to get WCS to identify the Client usernames? When trying to view monitored clients usernames, all it shows is Client Username <unknown>, though their MAC and IPs are correct. I'm not sure if this has to do with mobility anchors or not, but currently we have none setup in case. How to resolve the machine name or actual username that is logged in... either one.
View 2 Replies
View Related
Mar 15, 2012
I have just got LMS 4.2 soft appliance up and running. When going to Inventory >> Acquisition summary, I get a HTTP 500 error with java. lang.Null Pointer Exception. That is obviously a bug somewhere (although the TAC engineer disagrees with me). I am just wondering if this is could have been caused by the fact that I have not done any user tracking on this LMS server yet? [code]
View 1 Replies
View Related
Feb 18, 2013
We are running LMS 4.3.2, it was running OK... but now we receive the following message:
"User Tracking Major Acquisition cannot be started as Network Topology, Layer 2 Services and User Tracking are disabled."
All processes are running. System restart and re-install the 4.3.2 update does not fix it. I think this happens after a device update, maybe FaultManagementDeviceUpdate...
View 2 Replies
View Related
Apr 10, 2012
I have installed the ACS 5.1 and linked to my WLC, and when I enter my Logeo I agree Signature: User and password whenever you want from different devices, I want to do is only allow a user to one session at a time.
View 7 Replies
View Related
Mar 25, 2012
how many unsucessful attempts a user has to access the LMS application prior to the account being locked? Is this configurable?
View 3 Replies
View Related