I have a Samsung TV, which I can use to stream media from my computer. I also have a Western Digital My Book Essential external hard drive connected via my router. I was wondering if it was possible to access media on that drive, even when the computer is off (that's the goal here).
We would like to have the ability to connect to a VPN of a business we recently acquired. When connecting to it directly from the Internet (no firewall), it is accessible. However, behind our firewall, there is no access. We are using Cisco ASA 8.2 (2).Currently, we have an entry as follows:
-object-group service PPTP tcp -port-object eq pptp
access-list inside_access_in extended permit tcp any host object_name object-group PPTP. we want any device within our network to be able to access the VPN via PPTP.
I am running Windows 7 Home Premium (64 bit) on a Dell Inspiron 560. I am using a DI-524 D-Link wireless router. I have an Acer Aspire One Net Book running Windows XP Home it is equipped with an internal wireless network adapter. I can connect/communicate with router and access the internet with no problems whatever. However, when I connect an external wireless network adapter e.g. Alpha AWUS036H I cannot get a connection when I disable my internal network adapter. I have also tried the Trendnet TEW-424UB USB external wireless network adapter and the symptoms are exactly the same.
I'm planning to create a network of wifi access points all in different locations. Those locations all have different wifi routers and networks. I'm looking for a easy solution that let easily setup those networks to ask authentication credentials (in a browser page, once a user is inside the wifi and wants access the internet) by an external server possibly without overloading too much that server.
I have a web server on 192.168.1.2 and adsl modem/router on 192.168.1.1 when i access my computer from external ip by i get popup login window of adsl modem. Now how can i acess 192.168.1.2 or what changes in settings i have to do ?
I recently setup a Camera (DVR) system for a good friend of mine who just opened a restaurant. We are able to access the cameras just fine internally (LAN), but not externally (WAN).
I port forwarded, or 'pinholed' as this router uses, ports 9000 and 80 (changed the routers web port to 81 so there would be no conflict). I grabbed the external ip for the network and immediately tried connecting from home (I was doing everything remotely), and could not access the cameras, neither with the dvr software, nor with internet explorer.
EDIT: I believe he has a dsl line. I wonder if we'd need to change the configuration in the modem itself?
I'm trying to setup my home network so that I can access it when away from home but I've ran into problems and I can't figure out what is causing the problem.I've setup the router to forward incoming requests on port 80 to be directed to my PC running WAMP. The PC has a static IP and if I access it from another PC on my network I get the WAMP page load as expected.I've also setup an account with no-ip.com to resolve my (dynamic) ip. If I use the address they have setup while I'm on my network I get the login page for the router, again this is what I expect.The problem begins when I try and access my home address (whatever.no-ip.biz) from outside my network. I've tried it from 2 different locations and via a dial-up account and I get nothing.
Our secondary site accesses the internal intranet via a link, which is basically:
[URL] where externalip is the IP address of my router.
* This used to work fine before we migrated from ADSL (6mb up / 0.5mb down) to Fibre(70mb / 20mb) *
Internally, I access the same link, but via [URL] Internally it loads in 2 seconds, externally it is taking 68seconds(ish)..
I can't work it out, the fibre shouldave made things loads quicker but is infact very slow. I'm wondering if something network wise is going on.
The intranet is a php intranet sitting on apache, and using postgresql as the database. Other pages load fine, this specific index.php page does quite a lot of DB connections and so on, but as I say before, it worked fine before the migration.
I was able to configure the cisco to accept VPN connections from clients. But when i am connected i can not access the VPN LAN. My cisco VPN client shows all the time Packet Decrypted: 0 when connected. I tried the split tunneling configuration based on the example on cisco.com for split tunneling.
I include config for better understanding. The outside interface is fa0/1 with ip 10.0.0.2 w LAN 10.0.0.0 Inside interface fa0/0 with ip 192.168.10.9 w LAN is 192.168.10.0
There is VIP that is used by ACE for load balancing web servers. Internal users succeed to this VIP. ASA (connected to Core 6509 switch) is performing static NAT (VIP-to-External IP). External users cannot open web page while requesting for this IP. ASA is allowing request for any port. Also there is such string when issuing "show nat" on ASA: Untranslated hits . What can solve that problem?
I have several drives that are accessed through a LAN but as soon as I connet to another drive through VPN all the drives get disconnected. According to the IT people this is a feature of VPN for security reasons and there is no way to access those drives.Anyone knows if there is a way to connect to the VPN drive and the local LAN drives without getting the LAN drives disconnected?
Recently my laptop, which is successfully connected to the wireless network, has failed to recognize shared folders on my desktop and the external hard drive connected to it. Laptop running 7, desktop running XP Pro. 2 days ago it was working fine. Yesterday it stopped working. I have made no changes that I can think of. All of the folders on the desktop and external drive that I want shared are set up for sharing. So, my question is, what do I need to do to again be able to read and write to these folders, especially the ones on the external hard drive. I believe the adjustment has to be made on the desktop, either in the network connections or the file sharing, but the laptop may need adjusted as well.
I have a Windows 7 lap top and an Iomega eGo external hard drive. When I plug the hard drive into my computer via a USB, it works fine, but when i plug the hard drive in to the wireless router, I can not access it, and I would like access the hard drive wirelessly
I am having an issue where I cannot access certain files on websites. It looks as though the files are accessed via ftp. Could my router be blocking it. I have a Cisco 2801 router acting as a firewall.
So, i have set up a working Anyconnect solution, (see attached picture)
Firewall is a 5585-x ssp20 running 8.4.3 Core is cat 6500 Anyconnect client version: 3.1.00495
Configured vpn with a tunneled default route to 172.19.16.1 (Core - cat6500) No split tunnel is configured, everything has to be tunneled and monitored by WCCP in Firewall. Authorization is by Certificate Only.
I can reach inside servers (for example 172.18.254.37) i can reach DMZ server (for example 192.168.138.36) i can surf the internet on regular HTTP (port 80)
but, i cannot surf the internet or DMZ servers using HTTPS (port 443) also, ftp does not work. i have tried to reach external ftp servers who are open to all.
both https and ftp works from the INSIDE network.
I have tried to change the port for Anyconnect, to 444 (for dtls as well) and i can see that all the vpn traffic is going over 444, so 443 should be undisturbed.
but this is not working.. could it be a certificate problem, or am i missing something? NAT/PAT?
Basically we have different customers using the same 5510 firewall. We have created one sub interface for every customer on the inside interface. There are differed NAT rules for every customer all using the same block of public IP addresses on the outside interface. They do not have access to each other’s network so I cannot make any exemption rules between two sub interfaces. The problem is for all our customers that they cannot communicate with each other over Internet, Email, Applications etc. using the external IP address. A work around is to use a proxy server, but they do not agree with that. I cannot make exemption rules between sub interfaces for security reasons.
RDC not working from External network. all the computers have Win 7 ultimate edition.PC1 & PC2 inside the Home network using DHCP router (Dlink DIR-524)Pc3 outside the network, trying to connect to PC1 & PC2 through Internet.I have forwarded the ports 3389, 3390 on router to PC1 and PC2 respectively.when i do a port scan from PC3 i cannot find the port open.how do i deal with this.also tried by disabling the firewall, DMZ mode on router...but still not working.i can connect to both the computers PC1 & PC2 internally using RDC.
I need remote access to certain programs on my home PC but I just cannot get it to work.
When I set the programs port preferences (i.e. port 8087), I can connect with"127.0.0.1:8087" and webcamXP work fine. But when I replace the localhost with my external IP (lets say 220.127.116.11, so that would be "http://18.104.22.168:8087".I tried port forwarding: I have added the port to my NAT in the router's setting so it should be fine, but it is not (numbers are fictual of course):
external port start 8085, external port end 8089, protocol TCP/UDP, internal port start 8085, internal port end 8089, server IP address 192.168.1.215)
I also tried disabling AVG Internet Security 2011's firewall temporarily just to check it it was blocking it, but got the same result.I checked if Windows own firewall was on, but it is off.I cannot find any setting in the router's own configuration screen to disable any build in (router's) firewall (if it has any).
I have an e300 router with my external hdd connected via the USB port. I am trying to figure out how to access the hdd remotely. I am not trying to get to it through remote desktop access. I have my laptop that I take with me when away from home but I would like to be able to access the hdd via Internet.
using a Linksys E2500. I have a Ubuntu "server" set up which i can access on my LAN through VNC Viewer (windows machines) no problem. I can even access it through the external IP address on a machine inside the LAN (both internal address and external address work from inside the LAN). I set up port forwarding (per portforward.com) but i still can not access my machine from outside the LAN. It has a static IP as well btw.
I've set up a remote access group for Anyconnect on a 5510 running 8.4.5. Our company security policy prohibits split tunneling, but this particular location has no internal DNS (so I have to use a public DNS like google or something). How do I get this to work, I'm assuming I need to do a NAT exemption but I'm not sure how this would look, especially under 8.4.5.
I am aware that we can allow external admins to telnet over a custom port to the internal router. Even i was allowed to connect to a remote router via the remote firewall. The way i was accessing the router is by telnet to the remote ASA address on port 8023.I am not sure how exactly we can configure this on a ASA.
i'' ve one appliance ASA 5510, v8.X and asdm 6X here u have my configuration :
interface Ethernet0/0 description Link To WAN nameif outside security-level 0 ip address 22.214.171.124 255.255.255.252!interface Ethernet0/1 description Link to LAN(forefront) nameif inside security-level 100 ip address 10.20.80.1 255.255.255.252!interface Ethernet0/2 description Link to CoreSW (DMZ) nameif DMZ security-level 50 ip address 10.70.70.254 255.255.255.0
i have on server ssh (10.70.70.10) on my DMZ .
I wan to enable my external user, i mean outside user to be able to access to this server which is in my DMZ for this port ( ssh)
I have reserved the IP address 192.168.1.2 for my computer under Advanced->Basic->LAN->(Ip address Reserve).
I believe this is all i need to do for the router side of things.
Now for Apache: The .httpd file...
And that's everything. The problem is that when i put in my public IP address its not forwarding to my WampServer. its just going to the routers log-in page. If i put in my local ip then i get my servers webpage like i should.
I may have phrased the topic not too clearly, but I have an external domain name of mail.company.com , I want my users INSIDE the company be able to also get to url..., currently they cannot (nothing loads, looks to me as if firewall simply drops it) and I'm drawing a blank on how to get this done. Externally this works fine so if you're outside the company you can load up OWA just fine since my NAT rule translates the external IP to internal IP, but something is blocking this from the inside.
I have an ASA 5510. If you can just sent me on the right path with theory I'll figure it out on my own, I don't need exact steps, but I must be thinking of this wrong as I'm not getting anywhere.
i have just bought an external hard disk which i want to use as an ftp server. my internet connection setup at home is like so. I have a standard wireless router that my isp provides, and a wireless router(TPLink tl-wr1043nd). When i first connected the HDD to my tplink router, i had successfully made an ftp server, but just for local access. Now i cannot get how i can make my ftp server externally(access it from outside my LAN).
Basically, I need my external hard drive connected to my wireless network so I can have access to it from two computers BUT I want to be able to stream my videos/music via a USB 2.0 wire directly to my TV.The problem with this configuration is that the hard drive has one input/output USB 2.0 port. I am going to hook it up to a network enclosure which will solve the having the hard drive to wireless network...but how can I stream data via a USB cable to my TV?A friend of mine told me that I can have a USB connection from my desktop going to the TV - this will achieve the data going from my external hard drive via the network to my desktop and from my desktop to my TV via USBDoes this sound like I am on the right track? I am unsure as to whether I will need any software solutions to be able to have access to the data on the hard drive from my TV.
From our Exchange server, I am completely unable to communicate with one of our partner's mail server. I cannot ping it by either the host name or IP address. Trace route times out at the final hop. The firewall is disabled, and antivirus (ESET) is temporarily disabled. I cannot access the IP through the web browser either, everything times out.However, every other computer on our network can connect fine. I haven't seen any other problems with any other IP addresses, it seems to be only this one that I can't connect to, and only from our Exchange server. All computers are going through the same gateway, using the same internet connection, and using the same DNS servers.The computer that I'm having the problem on is a static IP. All settings look correct, and match another server that I can access the IP from.I've checked the hosts file for anything, and it is in it's default state.