RDC not working from External network. all the computers have Win 7 ultimate edition.PC1 & PC2 inside the Home network using DHCP router (Dlink DIR-524)Pc3 outside the network, trying to connect to PC1 & PC2 through Internet.I have forwarded the ports 3389, 3390 on router to PC1 and PC2 respectively.when i do a port scan from PC3 i cannot find the port open.how do i deal with this.also tried by disabling the firewall, DMZ mode on router...but still not working.i can connect to both the computers PC1 & PC2 internally using RDC.
Is there a way to connect a Non-NAS external HD to a network? My router does not have a USB connection.I wanted to share a 2TB external drive with the laptops in my home.
i have just bought an external hard disk which i want to use as an ftp server. my internet connection setup at home is like so. I have a standard wireless router that my isp provides, and a wireless router(TPLink tl-wr1043nd). When i first connected the HDD to my tplink router, i had successfully made an ftp server, but just for local access. Now i cannot get how i can make my ftp server externally(access it from outside my LAN).
Basically, I need my external hard drive connected to my wireless network so I can have access to it from two computers BUT I want to be able to stream my videos/music via a USB 2.0 wire directly to my TV.The problem with this configuration is that the hard drive has one input/output USB 2.0 port. I am going to hook it up to a network enclosure which will solve the having the hard drive to wireless network...but how can I stream data via a USB cable to my TV?A friend of mine told me that I can have a USB connection from my desktop going to the TV - this will achieve the data going from my external hard drive via the network to my desktop and from my desktop to my TV via USBDoes this sound like I am on the right track? I am unsure as to whether I will need any software solutions to be able to have access to the data on the hard drive from my TV.
From our Exchange server, I am completely unable to communicate with one of our partner's mail server. I cannot ping it by either the host name or IP address. Trace route times out at the final hop. The firewall is disabled, and antivirus (ESET) is temporarily disabled. I cannot access the IP through the web browser either, everything times out.However, every other computer on our network can connect fine. I haven't seen any other problems with any other IP addresses, it seems to be only this one that I can't connect to, and only from our Exchange server. All computers are going through the same gateway, using the same internet connection, and using the same DNS servers.The computer that I'm having the problem on is a static IP. All settings look correct, and match another server that I can access the IP from.I've checked the hosts file for anything, and it is in it's default state.
the setup is as follow: I have two separate network.192.168.90.xx and 10.10.xx.xx the two boxes being connected via an ethernet cable. How would I go about having a 192.(...) machine speak to a 10.(...) box? My boss tells me that via a UDP call the 192.(...) machine can get the IP of a 10.(...) box. Isn't UDP dependant on a subnet mask to limit the # of queries, and in that case would it even be feasable? I was thinking instead of spoofing the 192.(...) IP to an unoccupied 10.(...) IP. Of course to do this would require knowing what IPs are unoccupied on the other network, and I cannot assume the would respond to pings.
Two desktop computers with windows 7 home premium.Router: Netgear WNR2000v2 (which is NOT IPv6 compliant).External HD: 2TB Fantom.I have the external HD connected to one of the desktops via USB. I'd like to use it to back up the second computer to this HD.How do I get the second computer to recognize this as a backup target?Incidentally I've had problems getting HomeGroup setup since IPv6 is required for HomeGroup. I assume the problems are because the router isn't IPv6 compliant. I've tried the Microsoft Fixit 50410 (Use IPv4 instead of IPv6 in prefix policies. I've also reverted using Microsoft Fixit 50440 (Enable IPv6).
I have a Samsung TV, which I can use to stream media from my computer. I also have a Western Digital My Book Essential external hard drive connected via my router. I was wondering if it was possible to access media on that drive, even when the computer is off (that's the goal here).
I have an external hard drive that I used with my oldest laptop, windows XP. I have a newer desktop and laptop that are both running windows 7. I hooked my external drive to the desktop via USB port and want to be able to access from the other 2 laptops as well.
We would like to have the ability to connect to a VPN of a business we recently acquired. When connecting to it directly from the Internet (no firewall), it is accessible. However, behind our firewall, there is no access. We are using Cisco ASA 8.2 (2).Currently, we have an entry as follows:
-object-group service PPTP tcp -port-object eq pptp
access-list inside_access_in extended permit tcp any host object_name object-group PPTP. we want any device within our network to be able to access the VPN via PPTP.
I used to have an old G5 tower running OS X 10.5 (Leopard) which I was using as a file server. In this tower I had a USB dock connected where I could plug in 2.5 inch drives from my archive and then access them over the network by connecting to the G5.
Last week I upgraded my "fileserver" and I am running OS X Mountain Lion Server on a regular Mac Pro tower. When I connect to my new fileserver via Finder I am only able to see the local hard drives but none of the external ones. I can add a share-point for the external drives but that is not very practical since I am always connecting different drives from the archive.
So what I would like to have is that when I plug in an external drive to my file server it shows up in the network shares without me having to create a share-point for every different drive I connect.
I have a ASA 5505 configured with three VLANs: Inside, Outside, and DMZ.I am running an exchange server on the Inside network and have configured NAT to allow connections to it from outside. This works fine. I can also happily connect to it using it's internal address from the inside. In the DMZ I have setup a linksys router to work as a guest wifi network. I configured the ASA to block any traffic from the DMZ to the internal network.This has been working fine for the last few weeks.Wireless users cannot access any internal resoureces, but can browse the internet etc.. etc..
My problem is that I want users to be able to connect to the wireless with smartphones, tablets etc..., if they do so, they can access the internet, but not get their email. From my (limited) understanding, the problem is that the ip address I am trying to connect to is the same ip that I am transmitting from. Is there any way to send the packets to the outside network and then loop them back to the exchange server?
I have a Seagate 1TB USB External Hard Drive that I want to share on my wireless home network, and I'm having difficulty finding a cheap, reliable solution. I would also, ideally, like to connect a USB printer for similar sharing.I have two XP PC's on the network, and will probably be getting a Windows 7 machine.The router is the generic one supplied by my ISP.
1. Connect both hard drive and printer to always-on PC that shares with Windows.This would work but I'm not keen on the 'always on'
2. Use a Pogoplug to connect the hard drive and printer to the router Again, a good solution and always-on, but a little pricey - ?60-100?
I am running Windows 7 Home Premium (64 bit) on a Dell Inspiron 560. I am using a DI-524 D-Link wireless router. I have an Acer Aspire One Net Book running Windows XP Home it is equipped with an internal wireless network adapter. I can connect/communicate with router and access the internet with no problems whatever. However, when I connect an external wireless network adapter e.g. Alpha AWUS036H I cannot get a connection when I disable my internal network adapter. I have also tried the Trendnet TEW-424UB USB external wireless network adapter and the symptoms are exactly the same.
I'm using a Netgear WGT624 Router for my firm's intranet. At home I'm using a router called NSW-R2 by Gembird..
What I want to do is connecting my PC at home (Windows XP) to my firm's intranet so I can print on my LAN Printer or edit files on my NAS.
I've heard about VPN tunnels, but I don't want to keep my firm PC on 24 hours a day. So is it somehow possible, to build a VPN or something similar by only using the Netgear WGT624 Router?
Edit/More Information: I've steup a DDNS. My Router supports Port-Forwarding. I'm currently using Remote Desktop. Both PC run Windows XP Professional.
I have a simple wireless network in my home run through a Linksys WRT54G Router connected to a cable modem. I set up a Western Digital 1TB external hard drive as a network drive through use of a Seagate FreeAgent DockStar. (The HD connects to the DockStar by a USB cable, which in turn connects to the router by an Ethernet cable.)
The hard drive functions as a network drive and I've configured Windows 7 Home Premium on my laptop computer to recognize it at start-up so it can essentially be used read and written to like a local drive.
Is there a way to make Windows 7, either by built-in software or third party software, automatically backup certain files or directories when changes are detected?
For example, I have a folder on my internal HD where I organize the vast amount of photos that I take so that I can easily find them through the operating system instead of having to go through a photo manager. In my ideal situation, something would be monitoring to see if I have made changes in only that folder (either adding new folders, deleting photos, or modifying files) and simultaneously make the changes to the network hard drive. Effectively, I want something to mirror the changes on my local hard drive on the fly and update the network hard drive accordingly. I do this all manually at the moment and it sucks up a lot of time that could probably be done automatically.
I have a Western Digital 500GB external hard drive and I want to know how can I share this particular drive throughout my house?Currently, it's connected via USB on my Windows 7 Ultimate desktop computer. In the medium term, I will consider getting an wireless router that has a USB port on it - so that way, I won't need to have my Windows 7 desktop computer to be on all the time - just to share my external hard drive.I also plugged in this particular external hard drive on APC backup UPS - so that way, if the power goes out - I can safely shutdown my system - until the power goes back on.As for the wireless router, I currently have the Linksys E2500 dual-band wireless N router - to share my computers with a single internet connection via Cable TV. how do I share my external hard drive on my network. What are your other suggestions on the best way to share an external hard drive?
I'm planning to create a network of wifi access points all in different locations. Those locations all have different wifi routers and networks. I'm looking for a easy solution that let easily setup those networks to ask authentication credentials (in a browser page, once a user is inside the wifi and wants access the internet) by an external server possibly without overloading too much that server.
I am using a 6500 with FWSM. I need to separate an internal server/HQ network from 3 or 4 different external connections. The external networks do not necessarily need to be isolated from each other.I have the option of using a 3 layer model: L2 Access layer to SVIs on the Distribution layer and then L3 to the 6500.L2 Access, connecting directly to the 6500s, with the SVIs on the FWSM.Is it better to have the FWSM outside the MSFC or Inside? Am i correct in thinking that "inside" vs "outside" is determined by whether the SVI's are configured on the FWSM or the MSFC? is there any performance impact from having the FWSM doing the routing instead of the MSFC.If the vlans are all configured on the FWSM, what is the 6500 doing, other than providing switch ports?
My company have a Cisco PIX 525 firewall which is cater for NOC internal data network and also voice network, the subnet for data network is 192.168.2.0/24 and the subnet for voice network is 172.16.2.0/24. someday this NOC firewall was faulty. I was migrated the data network from this NOC firewall to the other temporary firewall just at the moment. And the voice network i migrated it from where it orginal at NOC firewall to a VOIP system which actually having a connection with my temporary firewall(This temporary FW only to take the traffic of data network). After the migration of data network from old firewall to temporary firewall and also the migration of voice network from old firewall to PABX system. The subnet for data network remain the same as 192.168.2.0/24, but the subnet of voice network i edit from 172.16.2.0/24 to 192.168. 3.0/24.Now when i want to use one Cisco router 2600 to replace this temporary firewall then facing problem at the voice network....The data network after migrated from temporary firewall to new 2600 is ok, users can browsing. But when i trying to at the same time when the data network been migrated , it will affect the voice network which still located at PABX. ..user cannot make call...I was thinking reason because this voice network which currently in 192.168.3.0/24 is tight to somewhere on the 192.168.x.x at the old firewall internetwork. So, when i migrated the data network over to new router, it will also cause the failure of voice even thought after i migrated the voice system to new router.So when i do the disaster recovery back to the temporary firewall for both data and voice. The voice is resuming to normal.
We have a working home network with 4 pcs connected to the network. 3 via ethernet and 1 via wireless. Everything is working fine. Then we have 2 more laptops which are connecting via wireless. When either of those 2 laptops joins the network, the whole network stops working for a minute or 2. After that it starts working again for everybody (including those 2 laptops). However its super annoying when it does that all the time. (The laptop goes into sleep mode, when u turn it back on again the internet(and the whole network) stops working for awhile again..).
earlier i got a BSOD and researched this and it turned out to be due to my wireless network adapter. I didn't think anything of it until i tried to connect wireless to the internet (usually use Ethernet) and i couldn't due to problems with my adapter. I have tried uninstalling and reinstalling the network adapter, i have tried drivers Etc with no luck
I'm having trouble with the internet connection staying connected, it seems to time out in between one and five minutes of having reset the wireless adapter. I've reinstalled the network adapters back to the ones that came with the computer with no luck, updated them, still no luck, tried restarting multple times and used different browsers.
i have no internet at all only local. But it is showing a full strength wireless signal, I have tried all the things i know plus what wdws recommended. Plus on the network tab it says its connected to an unknown network but in the manage wireless tab it shows my internet provider.
I am having problems getting my Brother MFC-9420CN printer installed correctly and printing over the server. I am running Windows Server 2003. I have 1 computer that is connected to the Server which has Windows XP Pro SP3 on it and the other 3 have Windows 7 Home. I cannot get any of these computers to see the printer and when I download the Drivers for the printer on the Server 2003 computer itself, it does not work stillThe printer is a Brother MFC-9420CN
I am having problems with any type of Network Card or Network USB adapter working with my PC running Windows 7. I had a LinkSys WMP54G PCI card working on this computer about a year ago as I was needing to use a wireless connection but then I didn't use it for 6 months. When I went to use it again, it wouldn't pick up connections at all.Thinking it was an issue with the card, I picked up a Edimax 7612UAn USB adapter thinking it should work out of the box. When I plug the USB adapter in, the standard Windows driver installation tries to run but an error message occurs stating "Device driver software was not successfully installed" accompanied by "Realtek RTL8191SU Wireless LAN 802.11n USB Failed". If I try to install the drivers manually, nothing changes and in Device Manager the following error message is displayed under Device Status "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)".
I am having problems with any type of Network Card or Network USB adapter working with my PC running Windows 7. I had a LinkSys WMP54G PCI card working on this computer about a year ago as I was needing to use a wireless connection but then I didn't use it for 6 months. When I went to use it again, it wouldn't pick up connections at all. Thinking it was an issue with the card, I picked up a Edimax 7612UAn USB adapter thinking it should work out of the box. When I plug the USB adapter in, the standard Windows driver installation tries to run but an error message occurs stating "Device driver software was not successfully installed" accompanied by "Realtek RTL8191SU Wireless LAN 802.11n USB Failed". If I try to install the drivers manually, nothing changes and in Device Manager the following error message is displayed under Device Status "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)".
