Keep Wireless Network Active While Host Pc Is Turned Off?

Feb 17, 2013

How do I keep my wireless network active while the host pc is turned off?

View 10 Replies


ADVERTISEMENT

Cisco VPN :: DS3 - Limit Number Of Active IPSec Connections Per Host

May 18, 2011

I have a hub and spoke network with over 100 remote sites that connect to me via ipsec vpn. One of these locations, the only one using FIOS coincidently, is initiating 200+ tunnels back to my side which is causing saturation issues on my DS3. (I can post config if requested), and how can I limit the number of active tunnels it's establishing?

View 1 Replies View Related

Cisco Application :: GSS 4490 / Point Active Directory To GSS To Look Up Host?

Apr 27, 2009

I have a GSS 4490 but only want it to be authoratative for certain hosts.  Sysadmins don't want to lose control of their DNS records.How do I point active directory to the GSS to look up the host?I need to keep the AD domain as authorative for the DNS records, but to pass on DNS requests to the GSS for certain hosts.

View 2 Replies View Related

Wireless :: Capability Turned Off Due To Network Adapter?

Jun 28, 2011

Wireless capability is turned off -Diagnostics Information (Network Adapter)

View 1 Replies View Related

Cisco Firewall :: ASA 5520s From Active / Standby To Active / Active

Jul 17, 2012

I have a pair of ASA 5520s operating in failover pair as active/standby, having two contexts on them. I am planning to share the load and make it active/active making first context active on the primary unit and second context active on the secondary unit. My question is if this will disrupt any connectivity thru these firewalls when I do "no failover" on the active/standby and assign the contexts to different failover groups and enable the failover back.

View 6 Replies View Related

Moving Wireless Network Printer From One Host PC To Another?

Aug 27, 2012

I had a home network with 2 laptops (one XP and one Vista) and 1 desktop (XP) configured through a Lynksys wireless router. There was already a Canon wireless network printer (with the Vista laptop set up as the "host" pc). This Vista laptop had to be on in order to print from any of the other 2 computers on the network. I then added another laptop (this one with Windows 7 64-bit OS) to the same home network (using workgroup), and I can print wirelessly from it in the same way (the older Vista laptop has to be on). The Vista laptop is hardly ever used since adding the new Win 7, and I would like to be able to print without having the Vista laptop on. How would I go about this? Do I have to delete the printer from the Vista laptop and re-install on the Win 7? It seems like there should be a way to let the router be the "print server," but I have no idea how to accomplish this. The WLAN settings on the printer all indicate the proper router settings from the initial setup. The printer is a Canon MX860.

View 8 Replies View Related

Network Connection Stops Working When Computer Turned Off

Sep 4, 2011

I am having quite a large problem with my TalkTalk connection. Whenever i turn off my computer, internet access stops for the entire network, anyone who is conencted, however, local access is still possible.I am also having a problem with the wireless in my laptop also. Whereas every computer on my network is able to access the router wirelessly, my computer (the one that seems to chut down internet access) won't do that, i send packets, but none are received.

View 2 Replies View Related

Home Network :: Host File On Wireless Router?

Nov 2, 2012

Using the host file to block inappropriate websites on a pc works great.But i was wondering can you do the same on a wireless router.for some reason i can not find the option to do this on my netopia router.

View 2 Replies View Related

Home Network :: How To Use A Network Connection As A Local Host

Nov 1, 2012

There is a device which is connected to the PC via Lan. I have an exe file which is supposed to get connected to that device and perform some operations. However, the problem is, the exe file tries to connect to the local host ip address 127.0.0.1 and i cant change the ip since it's been coded.So, I'm wondering if i can use the device connection (which already has a different ip like 169....) as a local host connection. So whenever it tries to connect to the loopback 127... it automatically connects to the external device.

View 2 Replies View Related

Can Pure IPv6 Host Ping A IPv4 Host?

Feb 10, 2011

I'm just wondering if its possible to ping an IPv4 host using the IPv6 host assuming that the NAT64 has already been implemented?
[code]...

View 2 Replies View Related

Cisco VPN :: Pix 515e - Remote Host Cannot Ping Any LAN Host

Jun 27, 2011

I have a host that can successfully connect to a PIX 515E (7.x OS) via VPN Client; however, I have no IP routing to the LAN from the remote host.The VPN IP pool works finem,The LAN default gateway is the inside interface on the PIX; the network is flat L2 behind it.The default route on the PIX points out; no other routes are defined,The VPN remote host can be pinged from LAN hosts, but the VPN remote host cannot ping any LAN host, not even the PIX inside interface.

View 2 Replies View Related

Cisco VPN :: ASA 5510 Ping / Communication Host To Host

May 7, 2012

ASA 5510
Ver 8.2(5)
 
I have been looking all over the place for the answer of how to allow clients on an IPSEC VPN to ping from host to host.

View 4 Replies View Related

Cisco Firewall :: ASA 5585X Active / Active Failover Group Inter Routing

Mar 20, 2012

I am looking at deploying a pair of 5585X's in an active/active multiple context state.  I am creating Mulitple contexts that need to be able to route to each other.  I was going to deploy a type of Gateway context that has a shared interface to all of the other contexts, instead of sharing interfaces directly between the contexts, i beleive this will work as basically i am just cascadng the contexts and sharing interfaces.
 
The main problem i have come across, is that if i deploy active/active across two appliances using 2 failover groups i can not see a way to route between them, for example. 
 
I have Context 1, Context 2 and Context GW A including the shared interfaces of Con1 and Con2  in failover group 1 on appliance A with the respective standbys on Appliance 2. I have Context 2, Context 4 and Context GW B including the shared interfaces of Con 3 and Con 4 in failover group 2 on appliance B with the respective standbys on Appliance 1.
 
I need to be able to route traffic between Context GW A and GW B so that the contexts can communicate in normal operation and in failover.  I do not beleive that I can share an interface between contexts in two separate failover groups and to be honest without adding a L3 device between the appliances i am not sure if this is possible.

View 9 Replies View Related

Cisco Firewall :: ASA 5510 Configuration Modifications In Active / Active Mode

Dec 17, 2012

I have two ASA 5510s running in Active/Active mode. I need to make config changes on them. How do I go about it? Do I power off the secondary ASA and make the config changes on the primary and then power on the secondary ASA ? Or this another way to do this?

View 3 Replies View Related

Cisco Firewall :: ASA5520 - Active / Active Failover In Multiple Security Contexts With Dual ISP?

Jun 1, 2011

I have an ASA5520 in location A with an ISP connection and a matching ASA5520 in location B with a separate ISP connection. We have fiber connecting the two locations and vlans passing back and forth so I will be able to configure the failover via a vlan as well as extend the ISP's to each location via vlans. The Active/Active configuration with the multiple security contexts does not seem to be an issue but how is a redundant ISP configured in this mode?We want to have context A using the ASA in location A with ISP1 as the primary and failing over to ISP 2 in locaiton B We also want to have context B using the ASA in location B with ISP 2 as the primary and failing over to ISP1 in location A Would route tracking provide the desired result? Is there a better option?

View 1 Replies View Related

Cisco Switching/Routing :: 6509 Series Switches Support VSS Active-Active Chassis

Feb 7, 2012

The 6509 Series Switches support the scenario VSS Active-Active Chassis, I would like to setup both switch's as one virtual switch but working at the same time, not with Active - Stand By Chassis.
 
My plans it to create PortChannel accross both Switches 6509 in order to have 2 links one connected to one slot/switch and the other connected to slot/switch in the second 6509 for servers redundancy.

View 1 Replies View Related

Cisco Switching/Routing :: ASR1000 - Dual ISP Active / Active Connection On Single Router

Jun 10, 2012

I am working on a network which has two ISP connections (Active/Active) terminating on router (ASR1000). From the LAN side (6500 switch) all the traffic need to be route on ISP1 but some of the specific subnets like 10.250.0.0/16 need to be route on ISP2 connection.
 
I am planning to use PBR and NAT with route maps. any documents or refrences are provided.  
 
(access switches)---------(core switch)----------(routers)----------------(ISP1)
----------------------(ISP2) 

View 1 Replies View Related

Cisco WAN :: 4507 R - Active SUP Lost Connection And Standby Came Active

Apr 10, 2011

I faced one problem in our core switch 4507 R . Active sup lost connection and standby came active. We got lot of errors/alerts on console shown below. [Code] Also when I reloaded the switch with reload command only both sups got reloaded but I want to reload all the modules but reload command do not gives any options for that.

View 2 Replies View Related

Cisco Firewall :: 5520 - ASA Active / Active Failover And IPS Failure

Mar 30, 2011

I have 2 asa 5520 firewalls including and 1 AIP-SSM-10 module in each of them. the configuration is set using active/active failover and context mode.
 
Both of them run individualy the IPS module. The IPS is configured using inline mode and fail-open option. However when one of the module fails and the state is changing from up to init or anything else making the IPS to fail then failover is detected and ASA consider it as failover and bounce context to the other unit.
 
IPS soft is 6.0(4) and ASA soft is 8.0(3)
 
I have checked cisco doc and it is confusing to me. it says:  "The AIP-SSM does not participate in stateful failover if stateful failover is configured on the ASA failover pair." but it really does participate. Running is not really an option because of production network impact matter..

View 2 Replies View Related

Cisco VPN :: Active / Active ASA 5520 Remote VPN Access Limitations?

Sep 19, 2011

We have an Active/Active ASA 5520 setup, as i know in Active/Active setup there is no remote VPN access, So i could overcome this limitations?I have a solution but i dont know if it is ablecable or not? we have a spare ASA 5510, so i can use it behind Active/Active Firewalls and assign a public static NAT IP address to it and open all IPSEC and VPN ports and let the remote users to connect to it, is this ablecable setup or not?

View 1 Replies View Related

Cisco Firewall :: ASA5585-X Active / Active Failover Using Etherchannel?

Dec 27, 2011

its possible to set up active/active failover using etherchannel on 5585s? 

View 1 Replies View Related

Cisco Firewall :: How To Configure ASA5520 For Active / Active

Mar 17, 2013

How to Configure ASA5520 for Active/Active

View 8 Replies View Related

Cisco Application :: CSM Active / Active In 2 Redundant 6500s

May 7, 2007

our application team is mandating, that the solution we should come up with for SLB, should support Active/Active mode of SLB operation.
 
My question, is this mode of operation supported/accredited by Cisco, and what is the draw back from the traditional active/standby.

View 2 Replies View Related

Wireless Capability Turned Off

Sep 6, 2011

My HP laptop (Windows Vista, 4-5 five years old) has started to malfunction. I cannot connect to the router attached to my PC. The message tells me that the wireless capability is turned off. It says "Turn on wireless capability - this can be done by using as switch which can usually be found on side of computer or a function key combination." I can find no switch on my laptop, and don't know how which function key combination to press.

View 3 Replies View Related

Wireless :: Capability Is Turned Off

Mar 26, 2011

even after switching on & off external button on laptop but still my laptop states wireless capability is turned off. what do i do.

View 1 Replies View Related

Wireless Capability Says It Is Turned Off?

Oct 3, 2012

the wireless capability says it is turned off, however the switch for wireless is on, and I heard that it might be in powerdown mode, do you know where on a dell this can be changed or the wireless capability turned

View 1 Replies View Related

TG782T / Can't Use Wireless When Main PC Turned On

Jan 16, 2012

Whenever my main PC is turned on, i get no [COLOR=blue !important][COLOR=blue !important]signal[/COLOR][/COLOR] from the wireless, like i cannot use my phone or laptop on the internet i use an ethernet cable which is direclty connected to my main PC my windows is also window XP and my modem model is TG782T only if my pc is turned off the wireless works

View 17 Replies View Related

Laptop - Wireless Capability Is Turned Off

Jan 9, 2013

My computer the theme of my laptop changed and a lot of programs have now shut off it has now been 30 minutes and I have turned on all the programs that was needed i did ant virus scan and nothing came up, how do i turn my wifi back on? its not my modem cause i manually connected it to the laptop and its working fine and if it was my modem I would still get to see the other connections in my housing area.

View 1 Replies View Related

HP Laptop Hangs When Wireless Is Turned On?

Dec 13, 2011

I have here a HP Pavilion g6 running Windows 7 with quite a strange issue. Once the wireless is turned on common programs e.g. Microsoft Word, Internet Explorer etc. stop responding. What I've tried:Scanning for viruses with Malwarebytes - None found Reinstalling the wireless driver Refreshing the network stack?

View 14 Replies View Related

Create A Network Between VMware And Host OS?

Jan 6, 2013

how do i create network b/t vm ware and host machine ?

View 1 Replies View Related

Wireless :: Cannot Connect - Radio Switch Turned Off?

Mar 7, 2012

Radio switch is turned off.

View 1 Replies View Related

Connected To Unencrypted Wireless / Firewall Turned Off

Jan 9, 2012

I am connected to unencrypted wireless, firewall turned off. My dropbox will sync and if I open IE I can access www.microsoft.com [very slowly] but so far that is all. Chrome wont open anything - just says proxy server problem. If I run diagnose from IE it say my connection is fine. I have AVG free software. I do get a error from totalnetguard when I boot up that says it can't log on. If I use my aircard direct on the computers usb slot and connect that way everything works fine.

View 3 Replies View Related

Desktop PC Turns On When Wireless Laptop Is Turned On?

Mar 29, 2011

He has a Linksys wireless router installed. He only uses the router for use with lap top for the wireless convenience around the house. The desktop PC is Ethernet wired;.

When both laptop and PC are shut off, and then he, in another room turns on the laptop, the Desktop PC start up all by itself.

Is there a setting on either of these PC or router that need adjustment?

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved