Setup HP Laserjet 4100N Printer To Print Wirelessly

Jun 21, 2012

I am trying to setup a HP Laserjet 4100N printer so that it can be printed to wirelessly. The printer is connected to the network by an ethernet cable. The tech guys told me to configure the printer as so...

IP: 10.4.100.205
SM: 155.155.155.0
GW: 10.3.100.1
DNS1: 209.183.205.35
DNS2: 209.183.192.65

I successfully set the IP, SM, GW but was unable to find anyway to configure the DNS1 or DNS2. Do the DNS's need to be configured for it to print?

View 2 Replies


ADVERTISEMENT

HP Laserjet 1020 Printer Won't Print

May 4, 2011

We have using printer in network, it cause problems daily that we give print in remote i.e., in our system it responds too many connections being used or otherwise network path not found.The printer model is HP Laserjet 1020.

View 1 Replies View Related

HP Laserjet 4200 And 3055 - Network Printer Won't Print

Dec 18, 2012

I have a small network of computers and printers in my tax office and consist of three computers running in window xp professional, one computer is designated as the server workstation and the c drive is the share drive and the other two work stations are mapped to the share drive c on the server workstation . so i am using peer to peer networking and these three computers are connected by a seven port router and two other printer are attached to the router also. i am having a problem printing from the computers to these printers, one is a hp laserjet 4200 and another is a hp laserjet all in one 3055.

In the past i just click and i would print, but a few day ago when i click print from either workstation it would que it to printing but it would have a message that it could not find my printer on the network. dont know why it all of a sudden stop working. do not know anything about setting up a printer on a network. do note the printers are connected to the router and not directly to the server workstation computer via usb. So the two workstation and the server workstation have the printer software on the C drive of each computer but for some reason it could not find the printers on the network. How to network a hp laserjet 4200 and Hp laserjet 3055 in a network that is connected by by one seven port router. why is the printers not in the network?

View 1 Replies View Related

Can't Get The Printer To Print Wirelessly

Jun 30, 2011

I can't get the printer to print wirelessly. I need a 10 digit number.

View 2 Replies View Related

Dell Laptop Setup To Print Wirelessly?

Sep 30, 2011

I have a dell laptop and i want to print wirelessly to my HP Photosmart C4795 printer.i have my wireless set up through a verizon westell modem router. my wireless is setup i can get on the internet on my laptop and use my ipod in the house through it. when i'm using my laptop i would like to print wirelessly without have to go in the other room and use the desktop which is connected to the printer.

View 4 Replies View Related

How To Enable Printer Settings Over Jetdirect On HP 4100N

Nov 16, 2011

I have a HP 4100N printer and I am using it over network.

Previously I was able to access the printer settings over internet, but now the only thing visible is Device Info and Networking. I can connect to the web server and I can set all the network related settings, but that's not what I want.

There should be a supplies, config, print info, etc. page, what are not visible now.

what setting should I set to enable this printer config page on the webserver?

The printer is a HP 4100N and the network card is J4169A (Jetdirect 610n).

View 2 Replies View Related

Laptop Setup To Print From PC Installed Printer?

Sep 20, 2011

I tried several approaches to enable my laptop to print from my PC Installed printer burt without success. The computers are connected via Wifi and both use Windows 7 operating systems.

View 2 Replies View Related

HP Laserjet 4250 / Installing Additional Drivers On Print Server

Jan 17, 2011

We have a Server 2008 R2 print server that handles all printing for our mixed windows domain. I am trying to install 64 bit drivers so that our newer 64 bit clients can simply double click on the printer to add it to their list of printers.

According to what I'm reading online, I'm supposed to go into the printer's properties. Click Sharing, then click additional drivers. Makes sense. I select the x64 for the processor type (x86 is checked by default and will not uncheck).

At this point it wants me to locate the drivers. I point it to the HP drivers that I have downloaded for 64 bit processors and hit ok but it tells me "The specified location does not contain the driver HP laserjet 4250 PCL 5 for the requested processor architecture." Which it does, although it is PCL 5e rather than PCL 5.

I also have read that the drivers need to have the same name. I assume this means within the INI file. I've tried to change all the locations to read PCL 5 instead of PCL 5e but it gives another error instead. "Windows cannot locate a suitable printer driver. Contact your administrator."

View 4 Replies View Related

Setting Up HP LaserJet 4050 Printer

Apr 22, 2012

I configured the HPLaserJet 4050 in my home for two laptops today.

Hardware involved in Setup:
Dlink Wireless Router for the internet connection at home. Two laptops with internet connectivity over wifi - needing the connection to the printer. One HP laserjet 4050 series printer (to be setup) Problem statement: Wanted to connect the Printer over the LAN cable to the wireless router and the laptops should be configured with the printer settings so as to print over wifi network.

Step-1
Power up the printer. Should warm up with the display showing 'READY' message. Do put A4 papers in the printer tray. Connect a one side of the LAN cable to the printer and the other to the router. In the printer : Click the 'Menu' button on the printer. Navigate till you see 'Information Menu' in display. Click the 'Item' button till you see the 'Print Configuration' in display. Now click 'Select' button. The printer should print two pages of printer configuration with the IP address also mentioned on sheet 1.

Step-2
Now from one of the laptops,ping the IP address from your computer system to ensure the connectivity to the printer within the network. Now follow these steps to add the printer:Go to Control Panel / Printers Click Add Printer Select Local (No automatic detect) Create a new port Select the Standard TCP/IP port Enter in the IP address of the Printer Then add in the drivers when requested for the HP, Laserjet 4050 PS. Now finish. It prompts to print the test page. Go ahead and print one to ensure that the printer in setup. Now repeat the Step-2 for any number of laptops in the home. All should get configured and work fine and should be able to print. No need to test for each and waste paper.

Now you can enjoy printing wireless and schedule multiple jobs and users also without efforts.

View 1 Replies View Related

Trying To Network HP LaserJet 4100 Printer From Xp

Oct 12, 2011

I am having trouble networking an HP LaserJet 4100 series printer from a Windows XP computer to my Windows 7 laptop. I have searched and solved the initial issue of the password being asked. That has been taken care of. I am able to search for and find the printer properly on the network, however when I select the printer it says that there is no valid driver found. The printer connects to the XP computer VIA parallel port. I ordered a USB to Parallel converter and I successfully connected the printer DIRECTLY to my laptop and it installed itself without the need for a special driver. So it prints successfully from either computer when connected directly but when I have it connected to the desktop and I try to network it, I still get the error that there is no valid driver.

View 4 Replies View Related

Network HP LaserJet CP3525 Printer Is Offline

Mar 30, 2011

I have HP LaserJet CP3525 network connected, it was connected and configured, and was working good. But now it's not avaliable, it just states OFFLINE. But it's coming up when turning it off and on again, for a few minutes, and then goes down again...

View 2 Replies View Related

HP LaserJet 4050 Network Printer Not Seen By Other Devices?

Feb 19, 2013

A friend had an old HP LaserJet 4050 wired to a Linksys 160N router. They use Time-Warner service and had the standard Motorola Surfboard modem. They have four computers on that network, two wired and two wireless. One of the wireless devices is a MacBook the other three are all running Windows 7.They recently added Digital Phone to the Time Warner account so Time Warner came and swapped out their modem for an Arris combo modem/router. Now all the computers are connecting fine but they can't see the printer. The printer is wired to the new modem/router combo box and has an IP address. Yet none of the computers can ping the printer let alone print.Before I chalk it up to an incompatibils and security software temporarily and the firewall in the modem/router was already disabled.

View 1 Replies View Related

Installing Laserjet 1025 Color Printer In PC?

Aug 5, 2012

I need to install laserjet1025 color printer in my PC.

View 1 Replies View Related

Using A Network Bridge To Connect A HP LaserJet 5000 Printer?

Sep 29, 2011

I would like to print to my HP LaserJet 5000 through my WiFi. The printer however does not have WiFi only an RJ45 jack. I bought a TP-Link WR541G router to use as a bridge. My current router is a 2Wire which I get my WiFi from.I cannot physically connect the printer as the location of the 2-Wire to printer is across my home. I am hoping to simply connect the TP-Link to the printer and link the TP-Link to the 2-wire. How to make the bridge

View 5 Replies View Related

View HP Laserjet 4000TN Printer Driver In Windows 7?

Jul 25, 2011

I moved my HP laserjet 4000TN printer from my business network to my home network and it won't print. What should I do?

View 1 Replies View Related

HP Laserjet P4515 Printer - Telnet And Jetdirect Over Port 9100?

Feb 22, 2011

I'm currently configuring a HP Laserjet P4515 printer. It has its own built in Jetdirect so, all that jazz is done.

I'm having issue when I telnet to port 9100. I type the typical Jetdirect commands: ? / MENU yet I receive no information back from any commands I type. Even configuration commands. Typically, all this gets me is a printed page (since 9100 is also the print port) with the commands I've attempted to type. Some garbled, some not.

View 2 Replies View Related

Linksys Wireless Router :: WRT54G2-V1 - HP LaserJet 1102w Printer Settings?

Aug 1, 2011

I have installed the HP drivers for  my HP LaserJet 1102w printer on my Windows 7 (64 bit)  Professeional and Windows XP laptops.They both print fine over the network using the WRT54G2-V1 router immediately after installing the drivers. However after shutting down either the computers or printer the settings are lost and the printer willl not work unless the drivers are reloaded.

View 9 Replies View Related

Canon MP 530 / HP LaserJet P2055dn Printer - Network Share Including Scan And Fax

Nov 3, 2012

I have an Canon MP 530 that works great for my home office network, but right now it's being shared off one of my PCs. I would like to network it like my HP LaserJet P2055dn, but not just printing, also fax and scan (via Adobe Acrobat Pro). Does this product really exist.

About two years ago I bought a Linksys device that turned out to be a $100 mistake, but now I'm really needing this sharing functionality.

View 6 Replies View Related

Wireless :: Cannot Wirelessly Print From Laptop?

Apr 11, 2012

I have a CanonPIXMA iP4000 printer connected to my 64bit VISTA PC via a USB cable. My XP laptop is connected via a Router to the PC. I cannot share my printer between the two. My Laptop says that the drivers are,nt loaded, even though they are installed. I used to be able to share the printer before, until I had a virus on the laptop, and I had the operarating system deleted and then installed.

View 4 Replies View Related

Print From HP LJ P1006 Wirelessly When Hookup To Netgear N300 Router?

Dec 23, 2012

I recently bought a practically brand new HP LJ P1006 with an extra brand new HP brand toner cartridge for $1 at a local auction. I have tested it, and it works perfectly, so all is fine there. I would like to know if it is possible to print wirelessly to it at all. I do not have it hooked up to a computer right now, we only have two laptops, so there is not a desktop to have it hooked up to in order to put it on a home network (I believe that is how that works).

I do have a Netgear N300 router with a USB port however, and I was thinking I may be able to do something there.

Is it possible to hook this printer into my router via USB and then be able to print to it from our latptops? If so, how would we go about setting that up to do so?

View 3 Replies View Related

Can't Get HP L7590 Printer To Print

Aug 19, 2012

I'm about ready to lose it here as I've tried to find an answer on the net and have spent way too much time with this to no avail. I have an HP L7590 printer I'm trying to hook up to my wife's computer so she can print from it. Her desktop computer and the printer are in the same room and I know I should probably just get a long usb cable and hook it up to her Vista machine when she needs to print but I've been trying to network it so she can just print easily. I have the Ethernet cable running from the printer to the Motorola SBG6580 modem. The modem is hard wired directly to her desktop and I just use my laptop wireless. I have Win7 on my laptop. I've configured all the network connections and we are sharing. Her desktop does see the printer both wirelessly and stand alone connected. I've tried to connect both ways but no joy. I've even been able to do a test print from her machine but that's all it will print for some reason. It looks as if it will run the print and it shows the printer icon in her taskbar but it won't print.

View 3 Replies View Related

Wireless :: Printer Will Not Print

Feb 18, 2011

I spend hours trying to get my printer to scan and print . I constantly get error messages,different ones each time job doesn't print,0x0000007a,0x80070002. I do not understand messages. Printing jobs will stay in que until I delete them. I have tried everything.Sometimes printer will not activate. Once I get it to activate it will deactivate and then I have to go through the process again. I become frustrated and will try again the nexr day. What can I do? It is a wireless network connection.

View 2 Replies View Related

How To Print On HP JetDirect Box Matrix Printer

Feb 16, 2011

The JetDirect Box isnt't attached to a PC but directly plugged into the network. Our customer can't find the installation CD or a manual of the device. Is there a command to send text files to the printer? We have installed the Unix-Printservice and know the IP of the printer. But as we don't have a queue name, we can't use the lpr.exe command.

View 10 Replies View Related

MFC-5895CW Printer Says Its Offline And Not Print

Oct 19, 2011

Recently forgot my wireless password so i reset it and ever since then my printer says its offline and wont print.IVE TRIED UNINSTALLING IT AND REINSTALLING IT but whenever i got to control panel and add printer it never finds it.its definately connected to my wireless because it says connected on the printer.

View 14 Replies View Related

C4500 Wireless Printer Now Can't Print

Jul 5, 2011

Our cable company installed a new wireless router and gave it a different name so now our HP C4500 wireless printer won't print. I can't find any of the installation stuff (ie CD, etc) to reinstall it.

View 3 Replies View Related

Sharing :: PC Can't Print To Printer Until Restart

Nov 18, 2011

i have access to a network printer and everything was working fine previously until last Monday. Now when issue a print command to the printer, the printout delays until i restart the machine before it comes out. If i issue another print command, i would have to go through the same process again. This is actually slowing my work rate and its really an inconvenience.whenever the issue happens, i ping the printers IP address to see if it is actually working. I also check in a browser to see if the printer is ready and all are positive but the problem still remains. Is there a way around this problem.

View 2 Replies View Related

Zyxel P2812 - Printer Does Not Print

Jul 15, 2012

Although the configuration is done, when a document is sent to the printer it gives error and does not print. We're using zyxel p2812.

View 1 Replies View Related

Getting Printer To Print On Different Subnet With No Routers?

Jun 29, 2012

I need to print to a printer in with a static IP on a different subnet from a host on a different subnet using DHCP.

View 1 Replies View Related

Can't Print Web Pages On Wireless Printer

Feb 23, 2013

[code] I had a new wireless DSL router installed on the network. The router recognizes both the laptop and printer and I can print documents from the laptop fine. I cannot print an accessed webpage from any browser (Firefox, Chrome or IE).

View 1 Replies View Related

Connected New Router But Printer Will Not Print

Sep 19, 2011

My printer is on, but will not print. I just connected a new router. Is there another connection I have missed? It's wireless.

View 6 Replies View Related

How To Print On One Printer Using Multiple Computers

Feb 20, 2013

How to print in one printer using multiple computer?

View 1 Replies View Related

Print To Wireless Home Printer From Anywhere?

Apr 17, 2011

I'm looking for a way to print to my wireless home printer from anywhere.What hardware/software would I need? My printer is is essentially a home-network printer. I would like to access it from anywhere so when I am at work/school and need to print to it, I can.

View 6 Replies View Related

Laptops Unable To Print To Networked Printer

Apr 4, 2012

There would appear to be a general problem with printing from a wireless laptop, judging by the number I've come across in the search for a solution to my particular problem.My Set-up is:BT Home-Hub (up to 8 MBs Broadband DSL connection with outputs of two ethernet ports and Wifi, telephone and USB

- port 1 connected to Vista PC
- port 2 connected to 8 port Netgear switch.

Netgear switch.

- port 1 input from BT Home Hub
- port 2 connected to TV
- port 3 connected to NAS
- port 4 connected to Samsung CLP 620 ND colour laser
- port 5 connected to this desktop PC (Win 7/64bit)
- ports 5 to 8 as yet unused.

Other PCs

- desktop running XP SP3 connects through WiFi
- old Toshiba laptop running XP SP 3 connects through WiFi
- new HP laptop running Win 7 SP 1 connects through WiFi
- Acer laptop running Win 7 SP1 connects through WiFi.(WiFi computers not necessarily connected all at the same time)

The issue.This desktop can print via the network..All XP pcs/laptops see the printer on the network and can print..The Win 7 laptops see the printer on the network, but when asked to print a test page, the document gets stuck in queue until it gives the Error - printing message. If the printer is sleeping, when the test page is sent, the Samsung print dialog panel on the laptop remains showing "Printer is sleeping..." as if no commands are being sent to the printer (and therefore why nothing prints). Cancelling the document returns the printer to normal - ie the exclam mark in the yellow triangle disappears and is replaced by a tick. When the laptop is shutdown, and then restarted maybe a day later, if the printer is on, it jumps into life and prints the test page from the laptop.I should add that the laptop is also part of the HOMEGROUP and can see the printer via this PC when this PC is on - and it can print via this PC in the HOMEGROUP. Both the problem laptops have the up to date Samsung drivers although it took an age to install - it seems to get stuck on the "Detecting TCP/IP Port" page and then goes to a page headed Additional port info required. On selecting Samsung Printer, it moves on to Detecting Driver Model, gets stuck there until it moves on to the old Add Printer dialog with Manufacturers in the left pane and printers in the right.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved