I have a CanonPIXMA iP4000 printer connected to my 64bit VISTA PC via a USB cable. My XP laptop is connected via a Router to the PC. I cannot share my printer between the two. My Laptop says that the drivers are,nt loaded, even though they are installed. I used to be able to share the printer before, until I had a virus on the laptop, and I had the operarating system deleted and then installed.
View 4 RepliesI have a dell laptop and i want to print wirelessly to my HP Photosmart C4795 printer.i have my wireless set up through a verizon westell modem router. my wireless is setup i can get on the internet on my laptop and use my ipod in the house through it. when i'm using my laptop i would like to print wirelessly without have to go in the other room and use the desktop which is connected to the printer.
View 4 Replies View RelatedI can't get the printer to print wirelessly. I need a 10 digit number.
View 2 Replies View RelatedI am trying to setup a HP Laserjet 4100N printer so that it can be printed to wirelessly. The printer is connected to the network by an ethernet cable. The tech guys told me to configure the printer as so...
IP: 10.4.100.205
SM: 155.155.155.0
GW: 10.3.100.1
DNS1: 209.183.205.35
DNS2: 209.183.192.65
I successfully set the IP, SM, GW but was unable to find anyway to configure the DNS1 or DNS2. Do the DNS's need to be configured for it to print?
I recently bought a practically brand new HP LJ P1006 with an extra brand new HP brand toner cartridge for $1 at a local auction. I have tested it, and it works perfectly, so all is fine there. I would like to know if it is possible to print wirelessly to it at all. I do not have it hooked up to a computer right now, we only have two laptops, so there is not a desktop to have it hooked up to in order to put it on a home network (I believe that is how that works).
I do have a Netgear N300 router with a USB port however, and I was thinking I may be able to do something there.
Is it possible to hook this printer into my router via USB and then be able to print to it from our latptops? If so, how would we go about setting that up to do so?
They've been networked together for over a year now,but all of a sudden,I can't get the printer to print from the laptop,but it still prints from the desktop. I re did the network wizard on both computers,and the add a printer step, but it didn't work. I also re installed the printer drivers on the laptop,but again it didn't work. When i click on the print icon,it acts like it's going to print,but I get "Printer not responding" and " Document failed to print" messages. The desktop is running Windows XP Home SP3,and the laptop is running Windows XP Professional SP3. The router is a Netgear WNR1000.
View 7 Replies View RelatedI recently purchased an Epson XP-205 Wi-Fi printer, and I set it up on my network and installed the drivers to my laptop, initially I could print over the network, but since a restart I can't. I have tried an uninstall and reinstall of the printer, but to no avail and if it matters, I'm running W7 64-bit.
I've ensured the printing programs are part of my firewall exclusion rules, and I can access the printers set up page via 192.168.1.3, also as expected, the printer is "pingable". On top of this my Android tablet is able to send things to the printer, so I'm sure it is an issue with my laptop.
My environment has a Cisco 3560G switch which does DHCP with a VLAN for wireless clients, connected to this switch is a Cisco WLC4402 to manage all wireless access points which are Cisco 1130 and 1140 series. We recently purchased an HP LaserJet pro CP1525nw color printer which we have connected with an Ethernet cable to the Cisco switch on a port in the same VLAN as the wireless clients. The printer will pick up a valid IP address from the switch and if I connect a laptop with an Ethernet cable to the switch I can ping the IP of the printer and print to it once I install the driver, if I unplug the laptop from the switch and go over the wireless my laptop gets an IP in the same range as the printer and I can ping the printer IP address as well as open the web interface for the printer but cannot print, once I open the print queue on my laptop I see error printing and nothing prints out. I always add the printer as an IP port and supply the IP address when I install the driver to test. I have also gone through the manual for the WLC4402 but did not find anything for printing. There has to be a setting on the controller that is preventing me from printing but I don't know what it could be. On the laptop I use to test I also installed LPR and LPD and I even tried using another printer that I know works fine in its place and still could not print, so I don't think it's the printer.
View 2 Replies View Relatedmy printer connect wit desktop,pc is connect to router for net.. is it possible to take print out through laptop without conect any wire connection to printer???
View 1 Replies View RelatedI've been trying to install our rwireless Hp printer on my laptop. I've had it installed and working, but then it goes offline and won't print. I've uninstalled and reinstalled to no avail. Now it has the error symbol on it (yellow circle withan exclamation mark)
View 4 Replies View Relatedwhen i connect my laptop to a wireless HP Photosmart 4500 series printer, printer fails to print.I have to connect it with the USB cable to print.
View 1 Replies View Relatedjust got a new router/modem and found the network but can only get local connection no internet. Im running vista?
View 2 Replies View RelatedI have a linksys WRT54GH wireless router running firmware v1.0.01 build 001.It's setup with DHCP.My desktop computer is connected to the router via cable.I also access the connection using my laptop, via wireless.The problem is that after I start using the desktop (wired connection), I can't connect from the laptop using wireless. It happens every time. I then turn the router off and back on again. After this procedure I can successfully connect from both the desktop (wired) and laptop (wireless).
View 6 Replies View RelatedA couple nights ago, my wireless router (Linksys BEFW11S4 ver4) just stopped letting me connect to the internet. All the lights were still flashing as they should, I could still go to the setup page, I just could not connect to the internet, both through wired and wireless. I could connect straight through the modem though.
So I decided that since the router was probably over a decade old that maybe it was just its time, and I bought a new one (E1000). I connected it, and still could not connect to the internet. I then did some internet searching and found this [URL] and I followed what was mentioned in post 10 (MAC address clone and changing local IP). Now I can connect through the wired connection and I rejoiced thinking I solved it.
Then I checked my laptop and it won't even connect to the router. It sees the router, but when I ask it to connect, it just says it can't. I decided I was too exhausted to try searching and fixing it on my own and if I tried I'd just end up breaking something out of frustration.
Running Win XP (no service pack), WPA personal. Two other computers connect fine. On an old laptop running Win XP the network card sees the router, but when I enter the correct passcode (16 character) I get a message saying the code must be 13 characters. How can a connect this computer without disabling the other two wireless devices running through the router?
View 2 Replies View RelatedI had to install a new modem for my Hughes Net satellite dish, and now my wireless laptop isn't connected to the router, meaning I can get online with it anymore.
View 2 Replies View RelatedRegion : Indonesia
Model : TD-W8151N
Hardware Version : V3
Firmware Version :
ISP :
Recently I bought TD-W8151N wireless adsl router, I have one desktop computer that connected to TD-W8151N via ethernet and wirelessly to one laptop, IP Addr: 192.168.1.4, Subnet 255.255.255.0 and Gateway: 192.168.1.1 : desktop (LAN connection IP Addr: 192.168.1.3, Subnet 255.255.255.0 and Gateway: 192.168.1.1 : laptop (wireless connection) but I can't ping each other and also can't access the share folders between them., both computers can access internet. Is there anything I missed the configuration setting of the router? Before I use wireless, I connected this 2 computers using cross-type utp cable, and working good.
I have a laser printer that's connected to a desktop running Win 7. The printer is set to SHARE. I got a laptop that I want to print from through the desktop. Is this possible? The printer is not wireless and I don't have a print server. I have wireless network running on my Linksys router, but the desktop and the printer are not on it.I have the desktop and laptop on the same WORKGROUP, but when I try to add the printer on the laptop by selecting a NETWORKED PRINTER option, I get an error.
View 2 Replies View RelatedMy laptop connects wirelessly via router to RoadRunner/internet and work well.I want to physically (ethernet) connect my laptop (via it's docking station) to a print server and then in turn to a printer."link" light is on, on print server however "pinging" 192.168.0.10 (factory default) fails.
View 9 Replies View RelatedHow can I get my laptop to print into my home printer.Laptop 1 is now located somewhere (not at home) and connected to the internet wirelessly through a building's free wifi.I have Laptop 2 at home. I'm using Laptop 2 to remote control Laptop 1 using Team Viewer 7. I tried to print into the home printer from Laptop 1, but an error message pop up saying Printer is offline.If Laptop 1 is at home it can print to the home printer, no problem. So, how can I get Laptop 1 to print remotely from its current location to the home printer using Laptop 2 as my way of remote controlling Laptop 1? The printer device is already installed in Laptop 1.
View 4 Replies View RelatedI tried several approaches to enable my laptop to print from my PC Installed printer burt without success. The computers are connected via Wifi and both use Windows 7 operating systems.
View 2 Replies View RelatedWe have a new building coming online. It is a layer 3 connection (OSPF) between our core and this building. I have a handful of VLANs configured at this building (using VTP) and I'm having a problem with only 1 of them (the printer VLAN).From the print server (a virtual machine who's host is directly attached to our core switch - a Cisco 6509), I can NOT ping any of the printers at the remote building. But I can ping the gateway for that vlan (which is on the L3 switch/router for the building - a Cisco 3750X).However, if I put a laptop on that vlan at the building, I can ping the print server as well as the other printers.
I ran a traceroute from the print server to the printer's IP address and after hitting the building's router, the requests just started timing out.
I double, triple, and quadruple checked the laptop and printer configurations. In my troubleshooting,I even created a DHCP scope and added the ip helper-address to the interface vlan. My laptop, connected to a switchport on that vlan received the IP address, DNS server info, etc. from the DHCP server (which is on the same vlan as the print server). From my laptop, I could get to all of our internal web servers. I configured the firewall to allow that IP range internet access, and had full internet access on my laptop.But still, I could not ping my laptop or the printers from the print server.
No change in the traceroute.
I then created a vlan interface on the access layer switch (a stack of Cisco 2690Ss) that the printers and my laptop were connected to.From the print server I *could* successfully ping that vlan interface.Traceroute went right to it (3 hops from print server - core switch, router at building, vlan interface on distribution switch).But I could still not ping the laptop or any printers from the print server.
I even wiped out all config related to this vlan - the vlan interfaces on the distribution switch and the L3 switch, deleted the vlan itself, the router network statement, etc. Then rebuilt it all over again.Same results. I've compared every line of config for this vlan to other vlans where this problem is NOT occurring and can find no difference.
I have a Canon i9900 printer wired to an XP desktop. I bought a new windows 7 laptop that connects to the internet through my wireless router. How do I setup the laptop to print through the router?
View 2 Replies View Relatedi want to simply see my desktop on my tv without cables is this possible without using apple tv or push2tv or whatever else that is out there like that, i have a wireless router a laptop with wifi and a a tv which can connect to both wirelessly, i have no problem sharing files, vids photos etc but how can i browse net on laptop on couch but can see it through my tv.
View 3 Replies View RelatedIt will work when I connect it using an ethernet cable but it won't connect to the wireless.When I run the network diagnostics, it says The wireless network key does not match or something like that
View 6 Replies View RelatedI have a LG tv with wifi and want to connect rto my Dell lap top (o/s 7)the tv sees the laptop recongnise's its name but when asked to conect comes up with "unknown error"message the laptop shows nothing
View 2 Replies View RelatedI want to shutdown my friends laptop from my laptop at school, how?
View 2 Replies View RelatedI have a printer (with wireless capability) wired to desktop (Windows XP) and a wireless laptop (Windows 7).My question is, can the printer be connected wirelessly to the laptop as well as wired to the desktop, or does everything have to be wireless? If I want to share files between the two computers, do they both have to be the same operating system? (one is Windows XP and the other is Windows 7)
View 2 Replies View RelatedWe have recently switched routers and now my laptop doesn't work wirelessly; it connects to the router but there isn't an internet connection. The laptop works fine when the LAN cable is plugged in though. Our other laptop can connect to the internet with or without the LAN cable. Both are Toshibas running on Windows Vista.I have tried various approaches such as downloading the latest Atheros AR5007EG drivers but it said that they're already the most up to date. [code]
View 5 Replies View RelatedI received a new hard drive along with recovery discs from dell yesterday. They told me the new drive would be blank and I would have to run the discs. Not a problem. Installed the OS along with the drivers that had check marks next to them.
Today I plug in my home internet and it won't work. Unplug it and turn the wireless back on and it gets online just fine.
I'm having a big problem with my connectivity. I can connect to the internet (a BT Home Hub router) using my ethernet cable but not using wireless. My computer is searching and finding wireless networks, but when I try to connect to my router, it says limited access/connectivity.
I haven't used my computer in quite a long time (7 months) as it stopped working and is miraculously working again now (huzzah!) but the wireless does not, when it was perfect previously.
I have run IPCONFIG/ALL and the details are below. This is done with the ethernet cable attached.
---------------- Windows IP Configuration
Host Name . . . . . . . . . . . . :
Primary Dns Suffix . . . . . . . :
[Code].....
I just got a TL- WR740N router and somehow managed to configure it using my girlfriends Acer Aspire One Happy netbook.The internet works fine when the netbook is connected to the router via cable but it can't connect wirelessly to the network I have created. At first some massege appeared saying that there are 2 identical IP's and there is a conflict or something like that. Now it just stops trying to connect to the network. I can connect with my own laptop tho.
View 3 Replies View RelatedI was trying to configure a friend's router, but their laptop wouldn't connect wirelessly. Initially, I couldn't connect via ethernet cable either, but I went into the settings and set it to obtain an IP address automatically. After that, I could connect via ethernet no problem.I was able to successfully connect wirelessly on two different mobile phones.I still can't connect wirelessly to this router (well, technically it says it's connected to the network, but it won't connect to the internet, nor can I bring up the hub settings). However, I can connect to their old router no problem. I'm not sure whether the problem lies with the laptop or the router, and don't presently have another laptop to check
View 2 Replies View Related