HP Laserjet P4515 Printer - Telnet And Jetdirect Over Port 9100?
Feb 22, 2011
I'm currently configuring a HP Laserjet P4515 printer. It has its own built in Jetdirect so, all that jazz is done.
I'm having issue when I telnet to port 9100. I type the typical Jetdirect commands: ? / MENU yet I receive no information back from any commands I type. Even configuration commands. Typically, all this gets me is a printed page (since 9100 is also the print port) with the commands I've attempted to type. Some garbled, some not.
View 2 Replies
ADVERTISEMENT
Feb 16, 2011
The JetDirect Box isnt't attached to a PC but directly plugged into the network. Our customer can't find the installation CD or a manual of the device. Is there a command to send text files to the printer? We have installed the Unix-Printservice and know the IP of the printer. But as we don't have a queue name, we can't use the lpr.exe command.
View 10 Replies
View Related
Nov 16, 2011
I have a HP 4100N printer and I am using it over network.
Previously I was able to access the printer settings over internet, but now the only thing visible is Device Info and Networking. I can connect to the web server and I can set all the network related settings, but that's not what I want.
There should be a supplies, config, print info, etc. page, what are not visible now.
what setting should I set to enable this printer config page on the webserver?
The printer is a HP 4100N and the network card is J4169A (Jetdirect 610n).
View 2 Replies
View Related
May 4, 2011
We have using printer in network, it cause problems daily that we give print in remote i.e., in our system it responds too many connections being used or otherwise network path not found.The printer model is HP Laserjet 1020.
View 1 Replies
View Related
Apr 22, 2012
I configured the HPLaserJet 4050 in my home for two laptops today.
Hardware involved in Setup:
Dlink Wireless Router for the internet connection at home. Two laptops with internet connectivity over wifi - needing the connection to the printer. One HP laserjet 4050 series printer (to be setup) Problem statement: Wanted to connect the Printer over the LAN cable to the wireless router and the laptops should be configured with the printer settings so as to print over wifi network.
Step-1
Power up the printer. Should warm up with the display showing 'READY' message. Do put A4 papers in the printer tray. Connect a one side of the LAN cable to the printer and the other to the router. In the printer : Click the 'Menu' button on the printer. Navigate till you see 'Information Menu' in display. Click the 'Item' button till you see the 'Print Configuration' in display. Now click 'Select' button. The printer should print two pages of printer configuration with the IP address also mentioned on sheet 1.
Step-2
Now from one of the laptops,ping the IP address from your computer system to ensure the connectivity to the printer within the network. Now follow these steps to add the printer:Go to Control Panel / Printers Click Add Printer Select Local (No automatic detect) Create a new port Select the Standard TCP/IP port Enter in the IP address of the Printer Then add in the drivers when requested for the HP, Laserjet 4050 PS. Now finish. It prompts to print the test page. Go ahead and print one to ensure that the printer in setup. Now repeat the Step-2 for any number of laptops in the home. All should get configured and work fine and should be able to print. No need to test for each and waste paper.
Now you can enjoy printing wireless and schedule multiple jobs and users also without efforts.
View 1 Replies
View Related
Oct 12, 2011
I am having trouble networking an HP LaserJet 4100 series printer from a Windows XP computer to my Windows 7 laptop. I have searched and solved the initial issue of the password being asked. That has been taken care of. I am able to search for and find the printer properly on the network, however when I select the printer it says that there is no valid driver found. The printer connects to the XP computer VIA parallel port. I ordered a USB to Parallel converter and I successfully connected the printer DIRECTLY to my laptop and it installed itself without the need for a special driver. So it prints successfully from either computer when connected directly but when I have it connected to the desktop and I try to network it, I still get the error that there is no valid driver.
View 4 Replies
View Related
Mar 30, 2011
I have HP LaserJet CP3525 network connected, it was connected and configured, and was working good. But now it's not avaliable, it just states OFFLINE. But it's coming up when turning it off and on again, for a few minutes, and then goes down again...
View 2 Replies
View Related
Feb 19, 2013
A friend had an old HP LaserJet 4050 wired to a Linksys 160N router. They use Time-Warner service and had the standard Motorola Surfboard modem. They have four computers on that network, two wired and two wireless. One of the wireless devices is a MacBook the other three are all running Windows 7.They recently added Digital Phone to the Time Warner account so Time Warner came and swapped out their modem for an Arris combo modem/router. Now all the computers are connecting fine but they can't see the printer. The printer is wired to the new modem/router combo box and has an IP address. Yet none of the computers can ping the printer let alone print.Before I chalk it up to an incompatibils and security software temporarily and the firewall in the modem/router was already disabled.
View 1 Replies
View Related
Aug 5, 2012
I need to install laserjet1025 color printer in my PC.
View 1 Replies
View Related
Sep 29, 2011
I would like to print to my HP LaserJet 5000 through my WiFi. The printer however does not have WiFi only an RJ45 jack. I bought a TP-Link WR541G router to use as a bridge. My current router is a 2Wire which I get my WiFi from.I cannot physically connect the printer as the location of the 2-Wire to printer is across my home. I am hoping to simply connect the TP-Link to the printer and link the TP-Link to the 2-wire. How to make the bridge
View 5 Replies
View Related
Jun 21, 2012
I am trying to setup a HP Laserjet 4100N printer so that it can be printed to wirelessly. The printer is connected to the network by an ethernet cable. The tech guys told me to configure the printer as so...
IP: 10.4.100.205
SM: 155.155.155.0
GW: 10.3.100.1
DNS1: 209.183.205.35
DNS2: 209.183.192.65
I successfully set the IP, SM, GW but was unable to find anyway to configure the DNS1 or DNS2. Do the DNS's need to be configured for it to print?
View 2 Replies
View Related
Jul 25, 2011
I moved my HP laserjet 4000TN printer from my business network to my home network and it won't print. What should I do?
View 1 Replies
View Related
Dec 18, 2012
I have a small network of computers and printers in my tax office and consist of three computers running in window xp professional, one computer is designated as the server workstation and the c drive is the share drive and the other two work stations are mapped to the share drive c on the server workstation . so i am using peer to peer networking and these three computers are connected by a seven port router and two other printer are attached to the router also. i am having a problem printing from the computers to these printers, one is a hp laserjet 4200 and another is a hp laserjet all in one 3055.
In the past i just click and i would print, but a few day ago when i click print from either workstation it would que it to printing but it would have a message that it could not find my printer on the network. dont know why it all of a sudden stop working. do not know anything about setting up a printer on a network. do note the printers are connected to the router and not directly to the server workstation computer via usb. So the two workstation and the server workstation have the printer software on the C drive of each computer but for some reason it could not find the printers on the network. How to network a hp laserjet 4200 and Hp laserjet 3055 in a network that is connected by by one seven port router. why is the printers not in the network?
View 1 Replies
View Related
Aug 1, 2011
I have installed the HP drivers for my HP LaserJet 1102w printer on my Windows 7 (64 bit) Professeional and Windows XP laptops.They both print fine over the network using the WRT54G2-V1 router immediately after installing the drivers. However after shutting down either the computers or printer the settings are lost and the printer willl not work unless the drivers are reloaded.
View 9 Replies
View Related
Nov 3, 2012
I have an Canon MP 530 that works great for my home office network, but right now it's being shared off one of my PCs. I would like to network it like my HP LaserJet P2055dn, but not just printing, also fax and scan (via Adobe Acrobat Pro). Does this product really exist.
About two years ago I bought a Linksys device that turned out to be a $100 mistake, but now I'm really needing this sharing functionality.
View 6 Replies
View Related
Mar 8, 2011
I was unable to telnet in to a SQL server on port 1433 to test the connection from the client PC.the application could connect and this alone verifies it is working on port 1433 for sql.My question is how can a telnet command on a specific port be blocked ?
View 3 Replies
View Related
Jul 5, 2011
Around 2 weeks ago, there was a storm in my city that completely shut down all the power for around 5 minutes. After we got the power back, I connected all the wires in the router again and tested the connection on my desktop. The internet was not connecting at all. Every few seconds a message that says "A network cable is unplugged" pops up and then it goes to Acquiring network address.I thought maybe the storm damaged the card. My father called IT Support from his office and told me to check for a light blinking next to the ethernet port at the back of the PC. IT said that if the light was flashing, then it wasn't a problem with the network card.I changed the Link Speed to every different option. No luck. I tried the Repair command. It shows up with a message saying that the IP address couldn't be renewed. I even updated all the drivers.I'm at a loss here.It's a Dell Dimension 9100 with Windows XP SP3.
Windows IP Configuration
Host Name . . . . . . . . . . . . : alifamily
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
[code]....
View 19 Replies
View Related
Mar 30, 2011
Dell XPS Studio 9100
Windows 7
Belkin router
All desktops and laptops in my house which are windows based are unable to connect to the internet, only the apple based ones are connecting fine. My problem is similar to the one craigs248 posted here [url]... I did have mcafee for my dell but i have turned it off and yet im still unable to access the internet, furthermore all the other windows- based desktops in my household are unable to connect to the internet.
View 5 Replies
View Related
Sep 26, 2012
I have a cisco asa 5520. i need to forward telnet to a router on the inside interface. Here is what i have done so far but it doesnt seem to be working.
I have created an access-list that looks like this:
access-list 102 extended permit tcp any host 10.10.60.2 eq telnet
But when do this it still doesnt forward my request to the router at 10.10.60.2 . So just to explain what im trying to do. I use Putty, i am putting the outside interface IP into putty, selecting telnet and opening the session. i need the outside interface to see this request and know to forward port 23 to the router on the inside interface with IP 10.10.60.2. The ASA is running version: asa842-k8.bin
View 3 Replies
View Related
Feb 7, 2011
I have external175x hp jetdirect which was used in previous network environment with obscure ip address, gateway, etc. and I am unable to access this jetdirect using the prior settings (obtained from printing test page).I have tried using browser access, have tried hp's network printer wizard and do not have the jetdirect CD.How do I get reset the jetdirect configuration back to factory defaults so I can reconfigure ?Or how do I access the jetdirect based upon prior configuration:Prior ip address: 10.96.96.40, prior gateway: 10.96.96.1 New network is 192.168.1.x
View 2 Replies
View Related
Aug 19, 2012
I'm having some difficulties configuring my Cisco WLC (5508) - ver 7.0.230.0 .I'm have multiple client device residing on same vlan associated to the WLC but unable to telnet over port 8090. However, when inter-vlan, client device able to telnet over port 8090.Say Machine A as application hosted machine and Machine B as client machine; [code] i should be looking on the WLC to allow telnet port 8090 over from Machine A to B within the vlan .
View 2 Replies
View Related
Nov 16, 2011
We have recently purchased SG 300-52Port Cisco Switch to support our Network but they constantly having some bizarre issues or I assume bugs, i.e. we cannot Telnet nor SSH to the switch now, whereas we were able to SSH before, we have set them up for Remote Log Services to get some syslogs and reports but no report have been generated nor logs,
I have done some testing through Wireshark and there are absolutely no reports / logs.We have some real issues with this switch and it’s hard to believe that this is a Cisco Product,
SG 300-52 Port Gigabit Managed Switch
Firmware Version (Active Image ) : 1.1.1.8
Firmware Version (Non-active ) : 1.1.0.73
Boot Version : 1.0.0.4
View 6 Replies
View Related
Dec 21, 2011
I have a new 877 that I am using for internet traffic for 3-4 internet only devices.I also have a clean network that i want to insure no cross contamination. However I plan on rolling this out to many sites, but for management I was hoping to set up a reverse telnet to the console port from our one of my clean switches. which should allow me to keep the units seperated and allow me to manage changes etc remotely. Unfortunatly there is no Aux port on the clean switch (3560). Is there still a way to acheive this? can i configure one of the ethernet ports to connect to the console of the 877?
View 2 Replies
View Related
Apr 23, 2012
We have several routers that can only be accessed on telnet port 6066 (vice 23). I have no global exec privilege so I can not provide config.So my question is: how do you configure the router to accept port 6066 for telnet and deny port 23?
View 4 Replies
View Related
Jan 21, 2012
I am having issues with 'telnet' on port 2821 to a range of servers connecting through vlan interface from my core switch 6513 running s72033_rp-DVIPSERVICESK9_WAN-VM) version 12.2(33)SXH7, RELEASE SOFTWARE (fc3). The telnet on port 1556 and 13724 is ok.
View 1 Replies
View Related
Jan 23, 2012
I have a network printer connected in a switch . I need to know , how can I connect this printer with computer. The computer is already connected with that switch with a straight cable. How can I use this printer with my lan port
View 3 Replies
View Related
Mar 18, 2013
I have an interesting and frustrating problem...Is there any way to connect a POS printer with a CAT5E input to the USB port on a computer?
View 7 Replies
View Related
Sep 5, 2012
How to find the correct port a printer is connected on using just the IP address on a CISCO WS-C4006/CAT IOS.
View 1 Replies
View Related
Dec 6, 2011
a 4 port USB hub be used to connect 4 computers to 1 printer. Essentially using a usb hub to network a bunch of computers to a printer nearby
View 1 Replies
View Related
Jan 9, 2012
I am trying to setup my printer using the USB port on the router. I installed the share-port utility 32bit and every time i try to connect to the printer from my desktop the computer crashes and i get a blue screen.
View 14 Replies
View Related
Mar 4, 2011
I recented purchased a used 8150 with a network card. What do I need to do to it to work on my business network of 5 computers (all running Windows 7 Home)? I believe that it has an old IP address stored on it already. How do I change or delete this also?
View 1 Replies
View Related
Oct 21, 2012
i am trying to put an ip address on an hp laserjet 4650, i an using windows xp,there are four other printers on the network.
View 3 Replies
View Related
Feb 7, 2013
Region : Germany
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 121127
is it possible to use the Print Server on the TL-WR1043ND without installing the "Printer Controller Utility"? I have a HP LaserJet 1022 (in compatiblity list) connected which is recognized by the TL-WR1043ND. I want to connect the printer manually to my Windows PC using standard tcp/ip port, but I can't get it working. I tried RAW with Port 9100 and LPR with lp1. What are the right settings??
View 1 Replies
View Related
