Servers :: Changing Prior Configured Hp 175x Jetdirect?
Feb 7, 2011
I have external175x hp jetdirect which was used in previous network environment with obscure ip address, gateway, etc. and I am unable to access this jetdirect using the prior settings (obtained from printing test page).I have tried using browser access, have tried hp's network printer wizard and do not have the jetdirect CD.How do I get reset the jetdirect configuration back to factory defaults so I can reconfigure ?Or how do I access the jetdirect based upon prior configuration:Prior ip address: 10.96.96.40, prior gateway: 10.96.96.1 New network is 192.168.1.x
View 2 Replies
ADVERTISEMENT
Sep 25, 2012
I have a list of servers that will be migrated from one subnet to another. Is there a script that can take my file that has the server name and the new IP address and modify the existing servers' network from the list? I want to place the script on the servers before I am ready to change subnets for preparation.
View 1 Replies
View Related
Jan 10, 2011
I am using Vista and have only one user accounts.Now I want to prevent changing the DNS server IP. I can prevent changing the DNS server IP or disable the LAN Properties.
View 4 Replies
View Related
Feb 16, 2011
The JetDirect Box isnt't attached to a PC but directly plugged into the network. Our customer can't find the installation CD or a manual of the device. Is there a command to send text files to the printer? We have installed the Unix-Printservice and know the IP of the printer. But as we don't have a queue name, we can't use the lpr.exe command.
View 10 Replies
View Related
Nov 16, 2011
I have a HP 4100N printer and I am using it over network.
Previously I was able to access the printer settings over internet, but now the only thing visible is Device Info and Networking. I can connect to the web server and I can set all the network related settings, but that's not what I want.
There should be a supplies, config, print info, etc. page, what are not visible now.
what setting should I set to enable this printer config page on the webserver?
The printer is a HP 4100N and the network card is J4169A (Jetdirect 610n).
View 2 Replies
View Related
Sep 1, 2011
Per PCI & company policy all VPN users have a 12 hour session limit. They will disconnected after 12 hours regardless of use. Is there any way to send a message prior to the 12 hour limit to warn the users that they will be disconnected in x minutes? I'm running SSL VPN on a ASA 5520 ver 8.4(1)
View 1 Replies
View Related
Feb 22, 2011
I'm currently configuring a HP Laserjet P4515 printer. It has its own built in Jetdirect so, all that jazz is done.
I'm having issue when I telnet to port 9100. I type the typical Jetdirect commands: ? / MENU yet I receive no information back from any commands I type. Even configuration commands. Typically, all this gets me is a printed page (since 9100 is also the print port) with the commands I've attempted to type. Some garbled, some not.
View 2 Replies
View Related
Jul 21, 2011
I am testing rogue on wire using 5508 WLC and , I have a dedicated AP configured as rogue detector and configured the switch port where the Rogue detector is connected as trunk. I have plugged in an autonomous AP with open authentication to the same switch so that it can act as a rogue. On the WLC, I can see that Autonomous AP as rogue on Wire. But along with that I am seeing another AP as rogue on wire, even though i have plugged in only one Autonomous AP to the switch.
View 3 Replies
View Related
Aug 30, 2012
Antennas were set aside prior to device installation, and now can't be found. Can they be ordered as a replacement kit?
View 3 Replies
View Related
Oct 14, 2011
After an upgrade of the WRT120N to firmware Ver.1.0.06 (Build 01) every device I have tried to use WPA authentication with will authenticate / associate with the device then drop the connection just prior to recieving a DHCP address.I have tried a Dell latitude laptop with the broadcom chipset, an iPhone 3GS as well as an motorola with google pad device and all experience the same problems.I have removed all mac address filtering, and re-enabled the essid broadcasting only to have the same problem persist despite stripping everything down to just WPA.
View 2 Replies
View Related
Jun 11, 2013
We are planning to split the Private servers from the DMZ Servers and configure an additional Interface and segment for this purpose.
Private Servers Segment: 192.168.4.0/24 (there is no DHCP all servers' IPs are statically configured)
DMZ Segment: 192.168.3.0/24 (This is a future deployment)
LAN Segment: 172.17.0.0/16
Both, Private Servers and DMZ Servers are in a collocation as well as the ASA5520. There are multiple Branch offices that uses subnets within the 172.17.0.0/16 Network and they are connected to the ASA5520 via Metro-E.
I do not know if this is possible but what I want to do is this:
In order to avoid the change of internal DNS records I want to mask the DMZ servers with a Private Server IP when a Private server or LAN host wants to access it like this:
The FTP server in the DMZ has the IP address: 192.168.3.100. But when a PC from the LAN wants to reach the FTP server it should points to its old IP: 192.168.4.100. This way the PC sends a packet to the ftp.corporate.net (192.168.4.100) the ASA recieves the packet and translate it to the (192.168.3.100) and send it out through the DMZ Interface.
Also if the Private Servers wants to reach the same FTP the ASA will act like a proxy-ARP and send the paquet to the DMZ by means of the translation of the IP.
View 6 Replies
View Related
Apr 16, 2011
i'm trying to connect 5 servers together to create a private network.Each server has a network of it's own and i'm trying to make all 5 servers communicate with each other to share and search data simultaneously..
View 16 Replies
View Related
Mar 20, 2012
I Have exented vlan 120,121 from DC-1 to DC-2,the DC-1 and DC-2 are connected using L2 Trunk over fiber terminated on Cisco 6513 on both site ,the distance around 40 Km ,on the DC-2 i just assigned server-1 TO VLAN 120 while server-2 in vlan 121 ,but these servers unable to communicate neither with DC-1 Servers or betwen them locally on DC-2 ,pls note that the servers at dc-2 rely on DC-1 for routing.
View 7 Replies
View Related
Apr 7, 2012
I am running Win 7 32-bit for my OS. I am on a desktop PC. I have a Internet modem only without the router. I have a Motorola SurfBoard SB5101.When I go into the Network Connections and do a diagnose. I get the following message. I tried doing netsh int ip reset reset.txt, and restart my PC, but it doesn't fix the error.Your computer appears to be configured, but the device or resource (DNS Server) is not responding.
View 3 Replies
View Related
Jan 23, 2012
I have an old Dlink DI-604 that I'd like to configure to work as a switch. I think this is possible but not sure how to do it. Switches are cheap but if I could save a few bucks with some tweaking I'd prefer that. Plus I figure I'd learn a bit about networking.Dlinks site on the DI[URL]Uverse and I'm out of wired ports on the Residential Gateway. I would like 2 more ports to network my PC and NAS, so my laptop and Xbox can access their files.
View 4 Replies
View Related
Jan 18, 2012
I have cisco 851 using ccp to configure EASY VPN
I click on TEST VPN SERVER then click start the status shows successfull
when I tried to connect a client I get mm_no_state
When I reviewed the report from the test I found
AAA authentication : Not configured
My AAA
aaa new-model
!
!
aaa authentication login tgcsusers local
aaa authorization network tgcsvpn local(code)
View 24 Replies
View Related
Jun 3, 2011
I have configured Squid on my system having Windows 7. I didn't missed any steps. In Services it is showing Squid running.But my internet is running directly without any proxy settings. And when i change to proxy settings at port 3128, internet stops working. I had installed earlier and it was working fine. but now I am also using ICS to share internet connection from a broadband to a lan through my system.
View 7 Replies
View Related
Mar 6, 2012
We have a network based from a server where data is stored, such as Quickbooks files, and an employee has a laptop instead of a workspace. He needs to be able to access the Quickbooks file from his computer- we are currently using Remote Desktop Connection, however it is proving to be quite complicated for him and I need to know how to set it up. I know how to set up Quickbooks and all- the issue is with adding his laptop to the workgroup.
View 3 Replies
View Related
Nov 5, 2011
I have a router that I have not used for a year or so...I just recently moved to a new location and was trying to set it up...I completed the set up disk several times but I keep getting an error that says my router is connected but there is no internet access...When I plug the port directly to my PC I have internet...The router that I am using is Linksys WRT54G...I have even tried resetting to factory settings and I still can't get it to work.
View 15 Replies
View Related
Mar 2, 2011
I need to re-configure the passphrase configured on my HP printer.How do you run the wireless network set-up in order to re-enter my wireless network WPA security passphrase?
View 1 Replies
View Related
Dec 9, 2011
Can the SBG6580 be connected to the Vonage router and function?
View 1 Replies
View Related
Apr 18, 2011
I purchased a Cisco 520 and am trying to set it up on my home network.Its ADSL PPPoA for WAN.I am trying to setup 2 LANS. One General Network,One DMZ for webhosting.Now, since this router has 4 ethernet ports, i assumed i did not need VLANS. Except when i try configure an interface with an IP address i get this error: % IP addresses may not be configured on L2 links.Now. Ive looked around on the internet about this error. And it seems that since these interfaces are not Layer 3 interfaces,they need to be associated with VLANS.This would be OK. Except this requires an IP address on an interface on the router! Back to square one.
View 6 Replies
View Related
Aug 9, 2011
I am having an ASA 5510 and have configured Clientless SSL VPN in it. Now I need to allow my SSL VPN user to access on a particular application(like mspaint.exe for example).When the user login to the SSL VPN, he should see only the particular aplication or must be able to access on the particular application.
View 2 Replies
View Related
Jun 13, 2011
I purchased 2 Cisco WAP4410N and i configured them on the network as 192.168.1.241 and .242.I see both SSIDs i created and they are named Cabo1 and Cabo2.
When i initially did the setup I was able to log into the webbased interface through both ip addresses.
I just tried again now, and Im able to log into the interface for .242 but not the .241. I am connect to the router with .241 via wireless because it is with the SSID of Cabo1.
View 1 Replies
View Related
Feb 9, 2013
I would like to know if we can use the following card i.e. WS-X6704-10GE along with SUP-2T which will be configured in VSS.
This line is supported with SUP-2T, however not sure if the sup 2t will be configured in VSS. If any supporting document can be provided for the same , that would be great.
If this is supported than whether i would be getting line rate/non blocking capacity with WS-X6704-10GE. Since SUP-2T provides 80 Gbps bandwidth per slot.
View 5 Replies
View Related
Jan 26, 2011
I'm having issues with SSH on my 3750G-12S. I'm not able to SSH to another switch when VRFs are configured.I've tried ip ssh source-interface, ssh -vrf doesn't exsist and I've upgraded the IOS to the latest version.
View 4 Replies
View Related
Mar 4, 2012
Can a PA-1GE module in a 7206VXR with an NPE-G2 be configured to negotiate/work with a 100mbps Vendor provided Ethernet Port? The router sees the interface but it is in up/down.
View 1 Replies
View Related
Dec 22, 2011
I'm trying to automate our rollout process with kiwi cat tools. I want to copy a file via TFTP or FTP: Cisco tftp menu knows the latest ip address which it was connected to.
View 3 Replies
View Related
Dec 5, 2012
Can ASA 5510 be configured as bridge mode and still send Netflow info to a collector?We have a PIX connect internal network to internet. Because PIX does not support NetFlow, as a temporary solution, we were thinking of putting an ASA 5510 between the PIX and internet gateway, and configure it as a bridge so that there will be no routing issues, and the ASA can still send Netflow info to a collector.
View 13 Replies
View Related
Dec 15, 2011
I brought this TP-Link wireless router months ago, and I decided to use it this time. Upon connecting the cables, all the lights are OK, however, during the installation, my pc cannot find the router. I read that supposedly the IP addresses of my PC and the router should be the same. But, even if i change the IP address (to 192.168.1.xxx), the computer still can't find it. Pinging it results to a timed-out request.
Windows IP Configuration
Host Name microsof-dhj0uv
Primary DNS Suffix
Node type
[Code].....
View 14 Replies
View Related
Oct 29, 2011
So all of a sudden the trusty HP 4000 stopped printing. A little bit of troubleshooting and I found out that the problem was the JetDirect card. I purchased a new one (615n - same model as the old one), installed it, ran a printer configuration page, confirming I have an IP (192.168.x.x) and subnet mask (255.255.255.0), config by DHCP.Also, ran a ping test and it appears to be fine?
View 1 Replies
View Related
Oct 31, 2011
Cisco 2651xm router
IOS: c2600-ipvoicek9-mz.124-15.T7.bin
Can a 2651XM router be configured as a PPTP VPN endpoint (client)? I ask because I want to connect this router to a professional vpn (privacy) service such as proxpn or mullvad or similar. If it can't, any vpn privacy services that cater for cisco-based vpn connection?
View 0 Replies
View Related
Aug 7, 2011
I have seen similar questions but with not a lot of answers for the ASA platform. As the title states, What procedures can I use to copy a pre-existing configured CISCO ASA 5520 to a brand new CISCO ASA 5520. I have found a URL that seems to answer some questions but not all. [URL]
The URL talks more about the PIX's than the ASA
Is there any documentation or shorter procedures for product specific on the 5520?
View 1 Replies
View Related
