Router Configured But No Internet Connection?
Nov 5, 2011
I have a router that I have not used for a year or so...I just recently moved to a new location and was trying to set it up...I completed the set up disk several times but I keep getting an error that says my router is connected but there is no internet access...When I plug the port directly to my PC I have internet...The router that I am using is Linksys WRT54G...I have even tried resetting to factory settings and I still can't get it to work.
View 15 Replies
ADVERTISEMENT
Jul 21, 2011
I am testing rogue on wire using 5508 WLC and , I have a dedicated AP configured as rogue detector and configured the switch port where the Rogue detector is connected as trunk. I have plugged in an autonomous AP with open authentication to the same switch so that it can act as a rogue. On the WLC, I can see that Autonomous AP as rogue on Wire. But along with that I am seeing another AP as rogue on wire, even though i have plugged in only one Autonomous AP to the switch.
View 3 Replies
View Related
Sep 16, 2011
I have just upgraded my old WAG54GS to WAG160N-E1 (Annex B). I've configured the PPPoE connection and everything was up and running... for about an hour. Then the router started dropping internet connection on pretty much regular basis (every 40-50min?) - it then takes 1-2 min until it reconnects again... Obviously that makes any online gaming a nightmare.
I'm now running again on the WAG54GS and everything is ok (except it doesn't support >6Mbps speed which is the reason I upgraded the router in the first place) so it's not an issue with the ADSL line.
View 1 Replies
View Related
Dec 15, 2011
I brought this TP-Link wireless router months ago, and I decided to use it this time. Upon connecting the cables, all the lights are OK, however, during the installation, my pc cannot find the router. I read that supposedly the IP addresses of my PC and the router should be the same. But, even if i change the IP address (to 192.168.1.xxx), the computer still can't find it. Pinging it results to a timed-out request.
Windows IP Configuration
Host Name microsof-dhj0uv
Primary DNS Suffix
Node type
[Code].....
View 14 Replies
View Related
Jan 25, 2013
I have a sa520w router I configured w a vlan for the wireless and port 2. Now I would like the switch to handle both traffic from the default lan and the vlan. I tried creating a vlan on ports 28 and 10 but I cant get it to work. I have my other lan on port 27. Ive read something about switch layers? not sure. so I want port 10 to route to the vlan and other ports go to the default lan.
View 19 Replies
View Related
Feb 24, 2013
We have configured new 2911 router with HWIC-2T with it.However we are seeing serial interfaces up, but can hardly ping other end. Again we are seeing a lot of CRC errors on serial interface.
But if we connected same cable, with other old router 2811, it works fine. Confiuration is same on both the routers. [code]
View 2 Replies
View Related
Jul 26, 2011
I have Dlink N300 router and also WRT54G2 router now with DD-WRT firmware, configured as a repeater.I have a PPPoE connection through Dlink router and want to extend signals farther, hence want to use Linksys (WRT54g2) as a repeater.I have set up the linksys as repeater but dont know how to check if its communicating with my Dlink and also I not able to get internet connection from the repeater.
View 5 Replies
View Related
Jul 3, 2012
We have received from a customer of us an WRT54GL box configured with a Coova software. This Wifi router was supposed to be a Wifi hotspot, but was not configured by us. This box is able, on startup, to get an IP by DHCP, to touch a remote Radius server, and so on (we "tcpdump" the Internet traffic, and we saw DNS requests, radius requests, ...)...
But, we are unable to connect to this box,by SSH or by HTTP, either by plug-in PC to the Internet RJ45 or the LAN RJ45. It has no IP as 192.168.1.1. Instead, it was configured to have 192.168.1.1 as gateway.
Of course, we have no doc on previous install, but only the admin/root password for SSH.We are afraid to lose the config (coova, ...) if we perform a hard reset.What is the best way for connecting on this box ?
View 1 Replies
View Related
Mar 24, 2012
I have a WRT54G2 with the most recent firmware upgrade (which brings issue one - there hasn't been a firmware upgrade released since mid 2009?) and am trying to connect to a VPN for work. The connection fails and I have gotten error messages indicating the issue is the router is not configured to allow GRE protocol.
View 1 Replies
View Related
Nov 15, 2011
I configured a 2811 series router for dmvpn. My two tunnels are up but one of the tunnel is flapping with this message.
View 4 Replies
View Related
Jun 18, 2012
I just noticed that i have port 10080 open on my router (wrt160nv3). Port forwarding is not configured and web administrative access is only allowed through https (443). DDNS is also disabled, I was wondering why this port is open.
View 9 Replies
View Related
Jun 4, 2012
I call century link because my router was not connecting at the proper speed of 7 mbps. That problem was easily remedied over the phone but the lady said she could see several devices connected. This lost me a bit because I have a double router configuration. The Action tech PK5000 i turned into nothing more that an internet modem. I disabled the DHCP and configured my Linksys E1200 for all the internal DHCP so there is only one cable going to the PK5000. I should technically speaking look like one user on there network with natural protection from the second router.
View 5 Replies
View Related
Oct 16, 2012
I have a Cisco E4200 with a Thecus NAS behind it. I configured port forwarding on port 80, 1080 and 4433 to access the NAS. However it's not working. Also tried to place the NAS in DMZ, but also I cannot connect it from outside my network. Inside my network, there is no problem.I also connected the NAS directly to the internet, and then I can access it from outside my network.I already tried a factory reset, disabled UPnP and IPv6, but nothing seems to work. I also replaced the router with a Cisco E3200, but it makes no difference.
View 9 Replies
View Related
Jan 22, 2013
I have a NM-1CE1U working on my router 2600 , configured with frame-relay . But seems it does not work on my router 2811. I have check that the replacement is HWIC-1CE1T1-PRI , right ？
But the problem is these two modules have different interface type , I want to keep my cable interface type and find one module card working on 2800 or 2900 router , can configure frame-relay.
View 2 Replies
View Related
May 1, 2012
I have configured policies to shape the traffic on the interface of cisco 7206 router. Now my managemet wants to configure these policies on time based ie policy should be applicable during specified time period onle. Is it possible? if yes how to configure it?
View 11 Replies
View Related
Sep 3, 2012
We have a DHCP SERVER implemented in a cisco router 2610.This router is connected to a switch cisco 2960 configured as DHCP SNOOPING. At the switch appear the next log message: [code] The ip address: 10.100.200.1 belongs to DHCP SERVER configured at router cisco 2610. What to do so these log messages does not appear any more? Do I need to do some configuration changes at some switch or router?
View 11 Replies
View Related
Dec 12, 2011
My main Internet connection is a frontier modem /router It is on the main level of the house. In the basement I am trying to set up the cisco E3000 through an Ethernet cable.
View 4 Replies
View Related
Dec 23, 2012
i have a big network of about 50 computers and have only one internet connection .i have applied for other connection so that if some time i link ll be down we can still work on other. how to configure other line on the same router
View 1 Replies
View Related
Apr 5, 2013
My router drops my internet connection at least once a day. When the router does this, my wireless network connection disappears from the network list. I have to disconnect router from plug and plug it back in to work again. If I hard-wire laptop to router or modem, I still do not get internet unless I unplug and re-plug router.
View 9 Replies
View Related
Mar 14, 2013
My router at work is working fine, at least for LANing...as for its connection to the internet, it keeps dropping the connection.The router will be connected to the internet for say an hour or 2, sometimes more, and then it drops the connection. Usually a router restart(either from the web interface or by pressing the on/off button) fixes it, but only for a while.
View 7 Replies
View Related
Aug 19, 2012
Our power went out yesterday. Had to reinstall router. Two computers are fine. One HP w/win 7 laptop has router connection, but no internet access.
View 2 Replies
View Related
Jun 10, 2012
My internet connection keeps dropping when using my router. I will have internet connection for a few hours and then it will drop. I thought it was a bad router (I had a Netgear N300 that is about 2 or 3 years old) so I bought a new Cisco Linksys EA2700 N600 router and the same thing happens. I can connect to the internet through just the modem and it works fine. Is is just a setting or something? BTW, I have an Arris cable modem that is several years old and my ISP is Suddenlink, and am running Windows XP Professional SP3.
View 10 Replies
View Related
May 16, 2011
I just purchased a Vizio Dual-Band HD wireless internet router, completed the steps on the quick start guide and I can get internet connection using my desktop but I cannot get internet connection using my MacBook. I went to [url]... and in the top right corner, it says "Offline" on the router. How do I make it say "Online"?
[code]....
View 14 Replies
View Related
Apr 9, 2013
This issue has been going on for a few weeks now, i will be using the internet and it will suddenly drop out. My computer is connected to my router, this connection is fine it is just the INTERNET connection that drops out. When this happens all of the computers on the network are affected.
View 12 Replies
View Related
Oct 26, 2012
Having a connection problem with Dell Laptop. Can connect to CenturyLink (ISP) provided DSL Modem/router but No internet Access. Other wireless laptop at home and (2) iPads work just fine on internet using same router.
View 11 Replies
View Related
May 30, 2012
I'm currently using a MI424WR Rev F router, with a Motorola SURFboard SB5120 cable modem.If I connect directly with the cable modem to the PC, the internet works perfectly fine. But the issue is I have 3 connections, (2 wireless, 1 wired)Okay when I connect my modem to the router (Ethernet into WAN, blah blah) the modem suddenly loses signals. I've noticed this on the modem's status page. (192.168.100.1)The downstream power level would constantly change, and the modem will lose the Known CPE MAC Address. (When connected to the router)In order to fix the problem, I would need to connect directly to the modem and reset to the factory settings and wait out the 30 minutes.
here's my current status:
2 Coax Splitters
Comcast Cable Provider
A Verizon Router (Capable until this point)
View 1 Replies
View Related
Dec 15, 2012
my router has intermet but i cannot get a connection to my computerbut its not just my computer my bfs computer our PlayStation nothing can connect to it right now i tried going in network and settings and diagnosing it and i tried unplugging the motem amd all the wires nothing is working. Two of the lights on the motem are green one is orange the wirless is lighting up blue. This is not the first time either....it came back after a while last time but now its not.
View 3 Replies
View Related
May 17, 2011
I need some brilliant mind regarding my Edimax router. After I install my edimax router my win7 pc connects to the internet however my 2nd computer which is running winxpSP3 is not able to connect. I interchange the utp cable but problem still persist. When my winxp pc is connected directly to the modem internet connection is absolutely good.
View 1 Replies
View Related
Sep 14, 2012
My internet connection has been a little crappy lately, I've done all the things people said, scan for viruses, clean with ccleaner, defragment, get rid of unneeded services and processes. Is there a way I can tweak the settings of my browsers so they load pages and videos faster? I have used AVG Pc tuneup and there was an option to speed up the internet in my browsers: Google Chrome and Internet Explorer 9 by getting rid of some things in the browsers. I forgot what those things were.
View 1 Replies
View Related
Jul 3, 2011
I want to share my wireless connection witch is coming from distant internet provider, to my desktop computer with wireless adapter. I have tplink wireless router witch is connected trough wan port to my lan network card also in desktop computer.So is there something wrong with this setting because i can not properly finish wireless router auto configuration wizard, it always return my error.
View 1 Replies
View Related
Jan 29, 2011
normally insert the D-link CD in my computer and then follow the steps. this time in the step that all connectivity was being checked the message appeared that one of the cables (ethernet or the other one) is not connected whereas I am quite sure that they are properly connected and nothing at least as far as I know is wrong.after several times, I could connect to the wirelss connection but actually there was no internetwhen I also tried with cable directly from wall jack to my computer it was also the same case.
View 4 Replies
View Related
Oct 9, 2011
Iv been having a wierd time with my computer connecting to the internet lately. What we have is a setup of 2 routers:
1st - has my mums computer plugged into it and an xbox 360, and gets access to the internet through a modem.
2nd - is plugged into the first router, and it has my computer and my brothers connected.
Lately the 2nd router can't seem to pick up any internet connection and I'm not sure why. Usually the only way to fix this problem has usually been to reboot the modem and the 1st router, but since my mum often uses her computer its kind of awkward for me to keep rebooting it when she's using the internet just fine. As far as I'm aware the settings on both routers are still at their default values when we originally got them, so why I'm being disconnected 50% of the time is a bit of a nuisance.
View 1 Replies
View Related
Mar 15, 2012
We have a dlink DIR 615 router that keeps dropping the internet connection. I checked with our internet provider about the connection and it is fine. The desktop has no internet issues just the wireless devices. We run a laptop, iPod, cell phone and tablet. Everything was fine until we added the phone and the tablet.
View 3 Replies
View Related
