How To Enable Printer Settings Over Jetdirect On HP 4100N
Nov 16, 2011
I have a HP 4100N printer and I am using it over network.
Previously I was able to access the printer settings over internet, but now the only thing visible is Device Info and Networking. I can connect to the web server and I can set all the network related settings, but that's not what I want.
There should be a supplies, config, print info, etc. page, what are not visible now.
what setting should I set to enable this printer config page on the webserver?
The printer is a HP 4100N and the network card is J4169A (Jetdirect 610n).
View 2 Replies
ADVERTISEMENT
Jun 21, 2012
I am trying to setup a HP Laserjet 4100N printer so that it can be printed to wirelessly. The printer is connected to the network by an ethernet cable. The tech guys told me to configure the printer as so...
IP: 10.4.100.205
SM: 155.155.155.0
GW: 10.3.100.1
DNS1: 209.183.205.35
DNS2: 209.183.192.65
I successfully set the IP, SM, GW but was unable to find anyway to configure the DNS1 or DNS2. Do the DNS's need to be configured for it to print?
View 2 Replies
View Related
Feb 16, 2011
The JetDirect Box isnt't attached to a PC but directly plugged into the network. Our customer can't find the installation CD or a manual of the device. Is there a command to send text files to the printer? We have installed the Unix-Printservice and know the IP of the printer. But as we don't have a queue name, we can't use the lpr.exe command.
View 10 Replies
View Related
Feb 22, 2011
I'm currently configuring a HP Laserjet P4515 printer. It has its own built in Jetdirect so, all that jazz is done.
I'm having issue when I telnet to port 9100. I type the typical Jetdirect commands: ? / MENU yet I receive no information back from any commands I type. Even configuration commands. Typically, all this gets me is a printed page (since 9100 is also the print port) with the commands I've attempted to type. Some garbled, some not.
View 2 Replies
View Related
Feb 5, 2012
i am using hp g62 notebook and i an unable to turn on the wifi adapter. in my hp wireless assisatant there is bluetooth option to turn on and that is also not working. i tried switching on the fn key and f12 no use. how do i enable the wifi adapter.
View 1 Replies
View Related
Oct 3, 2011
I received WAP4410N-G5 AP with 2.0.2.1 firmware and set up it very easily. Never experienced a single signal drop in a few days.
After updating firmware to 2.0.4.2 version I am completly unable to make any changes! If I press on "Enable" or "Disable" all settings will be lost after I apply them and neither "Enabled" nor "Disabled" is selected.
Had to revert back to 2.0.2.1. Is my AP faulty?
View 4 Replies
View Related
Sep 1, 2011
My home network starts from the ISP/Cable modem to a Belkin wireless router.
A WIN XP box connects via ethernet cable in that room. A second WIN XP box connects via wireless in the next room. A Third box Win7 laptop connects via wireless in another room.
All machines have Internet Web browsing working fine, all machines can see each others shared files and printers across the home network.
Here's where I get creative... I added a fourth box WIN XP via ethernet (LAN to LAN) to the Win7 Laptop. It shows as an �unidentified network� of type Public in Network and Sharing.
Using Shared Internet Connections on the Win7 laptop, the fourth WIN XP now also has Web browsing working just fine across the LAN to the laptop over the wireless and out to the world.
The Win7 Laptop can see shared files and printers on either side of its networks (fourth WIN XP on the LAN side, and first and second WIN XP on the wireless side), and they can see its shared files and printers.
However, the fourth WIN XP on the LAN network won't see the first and second WIN XP on the wireless side. File and printer sharing doesn't see to make the jump across the Laptop Win7 in the middle.
How do I bridge the two networks for file and printer sharing ??
View 14 Replies
View Related
Feb 7, 2011
I have external175x hp jetdirect which was used in previous network environment with obscure ip address, gateway, etc. and I am unable to access this jetdirect using the prior settings (obtained from printing test page).I have tried using browser access, have tried hp's network printer wizard and do not have the jetdirect CD.How do I get reset the jetdirect configuration back to factory defaults so I can reconfigure ?Or how do I access the jetdirect based upon prior configuration:Prior ip address: 10.96.96.40, prior gateway: 10.96.96.1 New network is 192.168.1.x
View 2 Replies
View Related
Aug 1, 2011
I have installed the HP drivers for my HP LaserJet 1102w printer on my Windows 7 (64 bit) Professeional and Windows XP laptops.They both print fine over the network using the WRT54G2-V1 router immediately after installing the drivers. However after shutting down either the computers or printer the settings are lost and the printer willl not work unless the drivers are reloaded.
View 9 Replies
View Related
Nov 17, 2011
I am trying to access the settings webapge so that I can delete computers from the scan list. When I select the settings link it attempts to open the page but then the lights on the adapter start to flash and it seems to lose the connection with it ....... The other links e.g. status, information and security seem to work OK provided they are aceessed before I select the settings link. One the lights have started to flash I have to switch off the adapter and switch back to restore the connection to the network. The adapter is connected to a BTHomehub. Other than this issue the printer works fine through the network.
View 15 Replies
View Related
Jul 7, 2011
Can the client lease time be set to never expire to prevent loss of connection for wireless printer with a permanent ip address on E3200? Or is there another way to ensure continuous connection?
View 6 Replies
View Related
Oct 4, 2011
I'm in the middle of restoring a Windows XP computer after a drive failure, and on the new system, the Turn On File and Printer Sharing setting has been forcing a reboot and always resets itself to Off after the restart.
View 1 Replies
View Related
Mar 21, 2011
I have 2 desktops (running windows 7), a Canon MF8300 printer, and an outgoing ethernet line, all on a Netgear Advanced Cable Modem Gateway CGD24-CPR. I'm only concerned with having the 2 desktops set up with the Canon printer.Both computers have been connected to the printer before and I have the startup disk. But once the new offices were set up and both of the desktops were moved, I can no longer access or find the printer.
I can IPconfig the Desktops for their IPV4 addresses and both desktops recognize eachother on a Homegroup, but I can't find the printer. I printed off the print configuration page from the printer which gave me an IP address (printer is set for auto-obtain), but using an IP search won't bring up the printer.All of the devices are plugged into ethernet ports set up for the three different office they are in and the actual location of the Netgear cable modem/router is over 100 feet away. My primary concern is getting the printer for the desktops, but I also need to add a wireless router into one of those office in the future.
View 15 Replies
View Related
Dec 8, 2011
I used WPS on my DIR-655 Rev B1 FW 2.03NA to register a Brother HL-2270DW Wifi laser printer and my Mac can never wake it up to print. It always works fine from all my Windows machines.It appears as xxx.xxx.xxx.6 on my network. But the router only shows its IP as 0.0.0.0 on the STATUSWireless page and I can't find any way to change that. My assumption is that the Mac can't find it because of this, but I'm not an expert on WPS.Maybe I should take it out of WPS and just assign it a fixed IP using DHCP Reservation. Or is there another fix? I haven't ruled out the Brother OS X printer driver, but it and the printer's firmware are both up to date.Two odd things:
1. I can ping the printer from my PCs but the Mac can't find see in and it's not a Firewall issue.
2. I can see the brother printer in Finder's Shared devices: so it sees it but refuses to interact.
View 7 Replies
View Related
Oct 25, 2011
how to enable ipv6 on pc?
View 1 Replies
View Related
May 28, 2011
How to enable UPnP?
View 2 Replies
View Related
Aug 16, 2011
Having a hard time trying to fiugre out how to enable the following logging on a 6509.I can't for the life of me figure this out.
View 7 Replies
View Related
Dec 31, 2011
I recently tried to connect to my wireless broadband and the icon had disappeared. I went into control panel and wlan assistant and tried to enable the wireless.A message comes up saying it is trying to install software for Broadcom 802.11b/g WLAN.I run through the process but then when I try and get on to network controller I get the message there was a problem installing this hardware. It says This Device is disabled (code 22)
View 1 Replies
View Related
Jul 12, 2011
I have Gateway that runs Windows Vista. It has recently stopped connecting to my wireless router because it says the Wireless Capabilities are turned off. I have the switched turned on, I have gone into the Control Panel and Networks and made sure that everything is enabled properly. It won't let me connect at all, and my sister's laptop will connect to the router so I know that isn't the issue. Why it won't recognize my wireless adapter being on?
View 1 Replies
View Related
May 5, 2011
The first time i had to set dmz i had free tech support from the company. no my free tech support has expired and they want money for tech support now.I would like to know what ip to put in my dmz setting, my ip is supposed to be static, but it changes every few months anyways.I'm aware that having dmz open is a risk, but i have a software firewall.i have my router setup so my 360 and my pc so i need dmz, , if i did not have dmz i would be setting up forward ports for quite some time, as i play multiple pc games.
View 6 Replies
View Related
Dec 28, 2011
i currently usin mio router model 2701 HGV-E , may i knw does this model have UPNP function?? my com internet can go in , but when i try connect usin my ps3 , it said UPNP is not available. i use ps3 internet connection test all successed only the UPNP not available.
View 1 Replies
View Related
Aug 8, 2011
my dir615 is unsecured how do i make it secure
View 1 Replies
View Related
May 18, 2011
I have new modell bendlex small modem. i want to enable security i configure wap personal but i canot access my modem i am using windows 7. what about TIK and AES anything related to configure security..
View 1 Replies
View Related
Oct 11, 2012
I recently bought a USB Adapter for my desktop. I tested it on my laptop (with the Wi-Fi off), and it works perfectly, but for some reason, my wireless network is disabled on my desktop and right clicking it to enable it will not enable it. Under "change adapter settings", the "wireless network connection" icon is continually grayed out. There isn't a problem with the adapter itself, as it works fine on my laptop.Here are the things I have tried already:
1. Installing the adapter in safe mode
2. Disabling firewall and uninstalling antivrius
3. Checking if the hardware and device is working perfectly
Is there any way to enable the wireless network connection?
View 8 Replies
View Related
Jan 17, 2011
my windows is no longer connecting to the internet.i I ran a diagnostic and it said to check firewall settings for the http port(80), https prt(443) and the ftp port(21). I haven't change anything in my settings and dont know why all of sudden i hvae to check firewall settings.
View 1 Replies
View Related
Sep 4, 2011
I have D-Link wireless N Home Router.How do i enable security on DIR-615
View 1 Replies
View Related
Jun 24, 2011
how to enable the password on d-link di-624
View 2 Replies
View Related
May 4, 2011
I have tried everything! My wifi disabled itself some how, i have a toshiba satellite and the fn f8 button is no longer there to turn my wifi on and off. I tried reinstalling the driver it didnt work. Its up to date. I also tried to restore my computer back to the last time it worked and that didn't work. I tried starting it in safe mode with networking and that didn't work. I can connect to the internet but through a wire.
View 10 Replies
View Related
Nov 23, 2011
How to enable GUI for a Cisco 1841?
View 4 Replies
View Related
Nov 23, 2011
How to enable GUI for a Cisco 1841?
View 1 Replies
View Related
Oct 19, 2012
I have successfully installed ClearOS 6.3.0 at home and I need to enable UPNP for gamming, XBOX and Bittorrent.
View 1 Replies
View Related
Jan 28, 2013
How to configure authentication of enable password using acs 5.3. I have installed acs 5.3 and created user and gave relevant passwords. Following config is done on router
aaa new-model
aaa authentication login default group tacacs+ local
aaa authen enable default group tacacs+ enable
tacacs-server host x.x.x.x key xxxxx
Now when I telnet router, i can authenticate username/pass with acs5.3 but when i try to enter enable command and give password, it gives me error in authentication. What is the process of configuring enable passwords?
View 6 Replies
View Related
Feb 26, 2013
I'm looking for a good router, home or even Small Business, with good QoS settings. Right now I have the Linksys E3000, but I think I could do better. I want to prioritize VoIP traffic.
View 10 Replies
View Related