I'm using windows XP Pro , in a local Lan, internet connection through a DHCP, and System software on IP 192.168.0.254. I'm the Admin of my PC, I just want to use the Internet and the System program. I want to block any user from accessing my PC or viewing my Processes by other programs like (Ideal Admin.). How to configure the AVG Firewall to do that ??
View 11 RepliesHow to configure win 7 to a xp ethernet lan
View 1 Replies View RelatedThis is my first time to use the Cisco ASA 5500 family. I have a request from a user to create an access rule, to allow all LAN traffic to Destination IP address 165.241.29.17, 165.241.31.254 with Destination TCP port 5060,5061,5070 and UDP port 50000-52399.
View 9 Replies View RelatedI can not find the option "Use windows to configure wireless network."
This is what I have done so far:
Control Panel> Network and Internet Connection> Network Connections> Right-click Wireless Network Connection> Properties and a window with two headings opens: General and Advance. There is no "Use windows to configure wireless network" option.
I am trying to configure wireless network to my computer but it keeps asking for security key which I am not privy to.
View 1 Replies View RelatedWe want to configure a Cisco WAP 321 to NPS on windows 2008.
On NPS system event viewer :
An Access-Request message was recived from RADIUS client XXXXXX with a Message-Authenticatior attribute that is not valid.
We have installed other RADIUS client on Windows 2003 Server and we have the same error.
On the Web interface of Cisco WAP only can configure the IP and password of the Radius server.
configure PEAP for wireless with Windows 2008. The doc we have only mentions Windows 2003. When we follw that document we get a faulure when we try to bind the certificate to we have generated to ACS 5.0 .
View 1 Replies View RelatedI want to set up a domain for a file server and MS SQL 2005 server on my server machine and installed windows server 2008 in it.
Do I need to set up DHCP server and DNS on Windows server 2008R2 or leave them to the router to do the job?
I have Dlink DWL - 2000AP+.
What I want to do is, to reproduce WiFi signal (from TP-LINK modem) by repeating with D-Link Wireless Access Point.
Here is how web interface looks. There is an option for repeating:
After clicking Site Survey I see all list of available networks. When I select one of them, the D-link saves changes then reboots. After that, Windows shows me something like that on available WiFi networks list:
<Repeated network name> 2
The problem is, when I connect to this network, Windows connects directly into root source, not to my WAP (I see this with inSSIDer utility).
I have an RV042 setup for quick vpn access.The remote computer in question is a win 7 64bit. The PC uses McAfee SAAS firewall. This disables the windows firewall.
1. I can connect to the vpn with SAAS disabled and windows firewall enabled.
2. I cannot connect to the vpn with both windows firewall and SAAS disabled.
3. I cannot run SAAS and windows firewall together to check if this would work.
I need to figure out what windows firewall is doing to allow the vpn to connect, and so how do this with windows firewall disabled. I can then leave the windows firewall disabled and enable McAfee SAAS.The message quickvpn provides when it fails to connect is that the remote gateway is not responding. The client logs show that the tunnel had been opened but it was unable to ping.
In my collage i have a LAN to the wind server 2003 again i m also configure a small LAN may be take a 5 computer but the communication is not done.
View 1 Replies View RelatedJust picked up a WEC600N Wireless N Express Card and installed. It's working, but it's connected at 54mb and I cannot find out how to configure the wireless settings. I think I am using the Intel Proset wireless software.
Also, router is a netgear wndr3700.
I am using the wireless router WRT54G2 V1 to configure on windows 7 . How to configure that .... It is working on windows XP
View 1 Replies View RelatedI have two Windows7 machines (PC and laptop). I've set PC as VPN server and laptop as VPN client using default built-in W7 network tools. I've disabled use default gateway in remote network on client machine, so client don't try to route all communication through VPN. I've routed port 1723 (TCP/UDP) on NAT to my server and enabled IPSec/PPTP/L2TP passthrough
I've put my laptop in indepedent network (basically I've connected it via 3G network), connected to VPN server and checked ipconfig /all
I've get:
IP Address: 192.168.1.101
Mask: 255.255.255.255
Gateway: (none)
LAN mask in server LAN network is 255.255.255.0 - I am surely missing something obvious, but Google doesn't give me any good advices; How can I access local LAN network from remote VPN client? How can I access local shared documents?
I have windows vista, and forgot my network password. I reset my router to factory settings by pushing the reset button on the back.I tried reconfiguring the router from the network icon, but at the end of the process it says it cannot configure my router.I lost my internet service in the process
View 1 Replies View RelatedHow to configure in windows server 2008 network NIC1 is WAN and NIC2 is LAN?
View 1 Replies View RelatedMy lap top and pc were both accessing internet fine. Now my laptop has the message windows cannot config. wireless connection. If you have enabled another prog. to manage this connection use that software. Then it says ifI want windows to config., start WZC service. I am a novice and don't understand any of this. I don't think I have done anything to enable another prog to manage the connection. I have tried reloading isp disc and making new network connection but to no avail. the little network logo has a red x constantly.
View 4 Replies View RelatedIs it possible to configure split tunneling for default Windows VPN Client and ASA 8.0? Everything works fine with Cisco VPN Client
View 3 Replies View RelatedI have a WN3000RP WiFi Range Extender but I cannot seem to find out how to connect to it on my Windows 7 Desktop computer to configure it. My Router is a Netgear Wireless G RouterWGR614 v9
View 7 Replies View RelatedWe heard that ASA ver 8.4 has PBR. Do we have some guidelines on how to configure PBR for ASA and can it do routing based on URL?
View 2 Replies View RelatedHow to assign NAT IP to server from Firewall
View 2 Replies View RelatedI am researching routers for a large emnterprise application, and their useability as firewalls. Also, is their one that is considered to be better over another?
View 3 Replies View RelatedHow to configure ASA failover for 8.4.
View 1 Replies View RelatedI'm having a problem configuring an ASA 5510. A previous employee started the config and left abruptly. He established a VPN Tunnel between two of our sites and that's working without an issue. The problem is, the network behind the 5510 at the remote location cannot access the internet.
ASA Version 8.2(1)
!
hostname PH-Firewall
domain-name pleasehelpme.com
enable password HXrQty4kqW8s8yeE encrypted
passwd ucA.qrYJWD9UyIFz encrypted
names
[code]....
I have a asa 5505 Sec plus with 3vlan, inside, outside and dmz.
On the outside i have 5 ip's for my use, and in the dmz i have a webserver that need to communicate with one sql server on the inside.
The "sql" also needs to be accessible from outside and thus has a static nat with a dynamic nat so it replies from same ip as on nat ie 72.72.72.5 webserver is natted with 72.72.72.6
sql inside ip is 192.168.1.2, gw 192.168.1.1
webserver ip is 192.168.2.100 gw 192.168.2.1
sec lvl on inside is 100 and on dmz 50
with a dynamic policy running inside-net/24 to dmz-network/24 translagt to dmz 192.168.2.2 i can get it to ping 1 way from inside to dmz, but not the other way around...
All i need is to open 1 port ie 6677 both ways for this communication to work.
I'm not very familiar with the CLI and do most stuf in GUI (know i should learn CLI, but time doesnt let me)...
on access rules i have just added everything from any to any using , ip, icmp, tcp and udp just to be sure... :-)
I am confiuging a DMZ on my ASA 5510 but I have run out of physical ports, since I have dual Wan ports configured. I plan to implement a DMZ using subinterfaces. I have 2 questions:
1) Do I need to configure a Vlan to complete this task?
2) Do I need to re-configure the other interfaces for subinterfaces and/or vlans as well?
Do you know how to configure PAT on Cisco ASA 5545x?
View 2 Replies View RelatedWe have Cisco ASA 5520 firewall. ASA Version - 8.0(4). ASDM Version - 6.1(3). Firewall Mode - Routed.
We want to configure QoS for some subnets and enable policing such that they cannot use more than 1mb of bandwidth. I think we cannot create more than 1 policy for it. In that case i created a policy with QoS enabled and configured the Input and Output policing with Commited Rate of 1024000 bits/second. But it does not seem to work.
how can i create such policy in the ASA to limit certain subnets to 1mb bandwidth ?
I'm trying to configure an asa 5510 8.2(1)?I have a range of pub ips 3*.108.234.145-150
>>> E0/0 3*.108.234.146 outside public
>>> E0/1 192.168.1.1 inside
>>> E0/2 192.168.3.1 dmz
would like to map dmz host 192.168.3.107 to external 3*.108.234.147 on port 5000 and 50001 LOCAL LAN should also be able to get to dmz host ports.i've tried a few configs and also following this example:
[URL]
without any luck, here is my config, also posted the out put of show arp which is able to see and ping the host on dmz, also the output of show access-list which shows hits to it.
prophase-pix(config-if)# show running-config
: Saved
:
ASA Version 8.2(1)
!
hostname prophase-pix
enable password encrypted
[code]....
i'm trying to configure an ASA with two ISP to be reached from internet for vpn access, the objective is that the user can use any of the Public address attached to ASA to connect to the company. Is this possible? i'm facing some problems because i can not use two different default routes (same AD) pointing to two different interfaces, this is the message that i receive "ERROR: Cannot add route entry, possible conflict with existing routes" and when i change the AD of one of the default routes i just can reach one ISP.
View 1 Replies View RelatedI want to set up ipchain firewall of my ubuntu so that it prevents to traffic to an specific IP address?
View 1 Replies View RelatedConfiguring Cisco 1841 router and firewall.My provider has put their equipment and given me 2 subnets with public ip address. I am used to getting just one Subnet and connecting my firewall straight to the hand off. But in this case I am a bit confused. I assume I will need to put a router and configure it with before I connect my firewall. [code] I also have a firewall that I would like to be on the subnet 2 at 200.xxx.97.130 and have my private network 192.168.xxx.xxx behind it.
View 2 Replies View RelatedI would like to know how to configure my DIR-600s firewall UDP Endpoint Filtering. I ve read some guides and I ve got to configure this to Endpoint Independent in order to play League of Legends. The problem is that I can see the option Firewall & DMZ but then I don't see the UDP or TCP Endpoint Filtering options.
View 1 Replies View Related