After having my modem and router switched off for about 3 hours (removing trojan on one machine) neither of my laptops or Nokia N8 can connect. The LAN is fine, all lights are showing ok on the router, inc WLAN, but no machines can detect the wireless signal?
View 6 RepliesLaptop detects not all available wireless connections and at the same time on existing connection is very poor signal strength. I make this announce when I compared my and my friend laptop wireless connections, his laptop detects more than ten available connections (when my ASUS K55VD with "Atheros AR9485WB-EG Wireless Network Adapter" finds just two, no more and both are on very poor signals). I have to be in the same room where is rooter if I want to use the Internet, and as for my friends they can use same wireless connection all above the house. I tried to re-install all network drivers on my Laptop, use programs like Xirrus Wi-Fi inspector, but also, no more than two available connections with poor signal strengt.
View 4 Replies View Relatedi am also facing the same problem with lenovo machine in windows 8 ,i have updated WLAN drivers ,even WLAN switch is on ,but still not able to diagnose the issue?
View 1 Replies View Relatedi am also facing the same problem with lenovo machine in windows 8 ,i have updated WLAN drivers ,even WLAN switch is on ,but still not able to dignose the issue
View 1 Replies View RelatedSo a few months ago I bought a wireless router, and I've been using it just fine with my laptop ever since. however, my father-in-law has a laptop and he can't connect to the router. and the other day I bought a brand new desktop PC, and it can't connect tot he router either.both my FIL's laptop and my new desktop detect the wireless router, then when connecting ask for the passphrase. so i put in the passphrase and hit connect, and it says that it couldn't connect (quite the vague error message).
I tried putting in an incorrect password, and an error message comes up saying that the passphrase is wrong, so I know thats not the problem. Next I dissable all security, and both are able to connect to the router just fine, but not with the WEP pass phrase.I don't understand why they can't connect since I have the proper pass phrase. I also have a nintendo DS and Wii, both of which are able to connect to the wireless router with a passphrase, but not without.
so, if I have no security all 3 comps can connect but not the wii or DS. and if I have the WEP security on, only 1 laptop and the Wii/DS can connect. furthermore, my DS requires a WEP security key to connect.so anyways, what would cause the problem with the laptop/desktop recognizing the wireless router, validating the password but not actually connecting? but being able to connect without any security?
my laptop detects my wireless network but it doesnt connect to it
View 1 Replies View RelatedI have a Gateway laptop the was recently brought back from the dead (basically)... So once the rescue and recovery was done some of the drivers were lost including the wireless adapter. I found most of the drivers and was connecting to the internet wireless fine. I just got internet installed in my house a few days ago, in the beginning the laptop would connet to the internet through the gateway set up in my home. Someone reset my modem back to the default settings by mistake. So I reset everything back to the way it was but now the laptop wont connect. I thought it may have been a problem with the modem but when I checke it it says everything is working fine so Im assuming that its something wrong with the laptop. It connects fine if I plug the ethernet cord in and I get the 'wireless networks detected' message and when I clikc on it my network is displayed but when I try to connect it says windows is unable to connect to the selected network. the network may nolonger be in range.
View 3 Replies View RelatedIm running W7 64 bit and i have a netgear wna1000 and it detects networks but wont connect to them
View 5 Replies View RelatedI have a strange error on my home network that I cannot find a solution to.I have an Huawei SmartAX MT882 from TalkTalk acting as a modem connected to a D-Link DSL-G624T acting as a router/switch. Connected to the D-Link I have a Windows 7 Pro machine (64-bit, SP1) and an XP (home i think) machine (sp 2 i think).The SmartAX modem is set up to perform DHCP and DNS relaying and the D-Link has DHCP turned off and DNS relay turned off.The Win7 machine can access the network, get an IP address and access the internet without problems, regardless as to the status of the XP machine.The XP machine can access the network, get an IP address and access the internet with no problems ONLY of the win7 is powered up. When the win7 machine is off, the XP machine seems to drop about 25% of the ping packets between it and the D-Link router and has no internet access (because of this i assume). [code]
View 8 Replies View RelatedI have a DIR-665 and I'm trying to install a B&W zeppelin air speaker, the speaker detects the wireless network but I cant see the airplay logo in the PC, mac, ipad or iPhone. Try with another router and ir works. try with a wired cable but still the same problem. IS there any issue with this routers and airplay, ATV or similar items? [code]
View 3 Replies View RelatedI am using Dell D600 with WINXP SP2. It detects the wireless network but it is unable to connect with it. I have tried all tools available on dell site but nothing worked.
View 15 Replies View RelatedNew Win-7 machine set up. I used the printer set-up wizard to install a networked printer in the new machine with absolutely no problem. Proved it would print from that machine.Now, I get a call informing me that her old XP machine, which had been printing to the network printer with no problems, will no longer print.Documents go into the print queue, but they don't get printed.No error messages show up.I did some messing around via remote access, and finally removed the printer with the intention of reinstalling it.Scanning for network printers turned up several redundant instances of the same printer with different names. Some are identified as "invalid" some a "access denied". Bottom line. I can't get any of the selections to install.On the Win-7 machine I did find a window that indicated that the printer is designated as being shared, but I didn't explicitly set it for sharing when I installed it. Also, I somehow got to a window that told me that for printers that were to be shared with other versions of windows I could optionally install drivers to support such machines. Didn't have the driver disk handy and took the window down. Now I can't even find it again.I need sorting this all out.Part of the problem is that out there in "network land" there are redundant remnants of previous installations that are being remembered inappropriately.
View 11 Replies View RelatedI have an E900 I replaced an old Airport Extreme with. The reason was for increased download speed. The Apple router I used saw my work network and I could access files and printers; no changes to my Mac were necessary. It worked out of the box. The new Linksys has Internet connectivity but will not see my work network at all. I have looked into the old settings and cannot figure out how to make the new router see my network. I called Linksys but no dice. What settings need to be changed to see the work network? It is connected to the same ethernet cable as the other router that worked fine.
View 1 Replies View RelatedWhen I connect my WUSB54AG, Windows(xp) detects cohiba 3887 rev0 device and I can't install it. How can I fix it?
View 4 Replies View RelatedI have a network problem. My windows 7 machine is not detecting win xp machine whereas win xp machine is detecting win 7 machine. They are in the same workgroup named Home. And the networking system is set to work. I have left the homegroup I was previously in. I enabled file sharing for devices that use 40 bit and 50 bit encryption. On XP I have enabled NetBios over TCP/IP. File sharing is enabled on both computers. I think it's something obvious as both instalations on different computers are really fresh and both windows haven't been tampered with.
View 12 Replies View RelatedI have a house with a Leviton Enhanced Infraestructure Platform that distributes cat5e wiring to multiple outlets throughout the house. The problem is: Some cables will not transmit the Ethernet (internet) signal, but when I connect a phone line to it, it works. So the cable integrity is fine, but somehow connecting the internet router to it will not make it work.
View 2 Replies View RelatedI have changed the wireless router and reset and kept the same old Name and password. This is functioning satisfactorily and my all other devices such as lap top, mobile etc are connected. But another laptop is not identifying the connection and hence unable to connect to internet. I have tried diagnostic and repair tools but have failed.connect my device to internet via wireless router?
View 1 Replies View RelatedI run a windows 7 x64 and I am currently running a Intel (r) 82579V gigabit network adapter. The thing is, the driver was made for 82579LM and V versions. Most of the time, my computer reads the adapter as the LM version, in which the ethernet just won't work. Once in a while it gets the V version and everything is alright, but i can't live with such uncertainty. Mostly people suggest i should just buy a new motherboard (?) or a new network adapter, but i'm sure it's a software problem. Shouldn't there be other solutions? The card itself is integrated.
View 12 Replies View RelatedI just set up my 655 and it hooked up to the internet right away. I also connected my x box and wi-fy iphone without a hitch. THen I tried to connect my blue ray player that has a wireless feature. My last dlink router recognized the blue ray without a problem. With the 655, the blue ray can see my router and network, but can't connect, saying their is a dchp issue or I need to fix the IP address. Dlink support told me to upgrade firmware but my version is 2.0, and the only thing I can find is a V1.34.
View 7 Replies View RelatedFor last few days I've been reading about Spanning Tree Protocol ,L2 protocol and understood how it prevents loop in network ,various steps in STP but one thing i wanted to know how STP actually detects the loops in network so that it can prevent it.Somewhere I read STP uses BPDU as probe and detects loops I mean how it happen is when switch send a BPDU with Destination Address as multicast and receive same BPDU again mean there is loop in network .But is it how STP detects loops in network?
View 5 Replies View Relatedlike today randomly my internet went down. And then everything changed back to its original like my SSID from Netcom it changed back to wireless and everything was default and also the PPP was off so i wasn't able to connect to the internet. So i went to my router setup page on the internet or whatever and turned it back on. So now like the internet on my computer which has a cable to the router works but the wireless internet doesn't work for my laptop nor ipod. I can see the connection on the laptop and ipod but when i try to connect it keeps saying that it is unable to connect.
View 7 Replies View Related I cannot get wireless collection to work up stairs with the WUS600N Adaptor at all,and with the modem 20 feet from from my laptop downstairs i am only getting 3 BAR SIGNAL STRENTH.Just had Replacement WAG160N ALEX A V2 as my other one died ,(did not have a problem with the one sent back for replacement) Have the latest firmware 00.20 installed model serial No is SSH10JA11079.WUS600N V1 latest drivers for windows 7 .03.10.Windows detects the modem ok, but there is no signal at all up stairs and with the modem downstairs even the wireless on the laptop (15 feet from the modem) is only 3 bar signal strength ,did have this problem with the one I sent back. I have gone through all the wireless channels setup in the set up page with customer support (5 hours!)
View 2 Replies View RelatedSo the power light on my WRT54GS router is off but my LAN lights 1-4 and the WLAN light stay on when power is attached but no cables are in the ports.
View 4 Replies View RelatedAre the lights supposed to always blink in random order..the power light is solid but other 2 beside it and the 1 where the desktop is plugged in are blinking like crazy.
View 5 Replies View RelatedI'm using Linksys WAG160N - ADSL Modem/Router on one Desktop with Linksys WUSB Adapter. This connection is working fine.Recently I decided to add another Desktop wirelessly to share network, files and internet access. The second desktop is located in another room (approx. dist. is 30 Ft.)The second desktop detects the Modem but it fails to connect and it shows limited or no connectivity.
1. Allow Internet Access to both the desktops without loosing connectivity or without comporomising on speed.
2. Allow file/disk haring of desktop 2 with desktop 1.
I disabled the Bluetooth in my lap but the lights is on why? My laptops is Asus netbook 1015?
View 4 Replies View RelatedI have an E1000 wireless router and after rebooting it from the web admin page it won't stop blinking. I tried following the reset instructions on this page but it is still blinking.
[URL]
I can't access 192.168.1.1 via my browser either. Is there anything else that I can try before considering it defective?
I went online with a tech real quick before I found I beyond complimentary tech support. They say my router is working like a switch. I cannot get any wireless access and to the three direct connections to the router only one is working. The lights are constantly blinking, with the power light blinking every so often
View 1 Replies View RelatedSomehow in the process of researcing how to add my new laptop to the router, the router quit working and is now just blinking the blue panel lights.I was attempting to download Cisco Connect to my flash drive and instead it began to execute and I aborted that in about 10 seconds.
View 1 Replies View RelatedI have a LinkSys WRT 160 N wireless router, the router just stopped starting abruptly, when i power cycle the router, all the 4 ethernet light come on, and that is where it gets stuck. I've tried using the reset button but there is no effect after i depress the button.
View 1 Replies View RelatedMy e1000 router (v 2.1) has reset itself and after that all lights except the wireless adapter has gone solid blue, I have no ethernet conectivity and hard reset the router did not work.
View 9 Replies View RelatedI had successfully set up my new WRT150N router and it was working. But then it just stopped after about 12 hours. All the lights on the front of the router are blinking. When I directly connect to the router, my computer can't detect it. I've browsed through these forums a bit and tried a few things - the reset button (60 seconds), unplugging the router, downloading the EasyLink Connect tool, but I'm still stuck.
View 5 Replies View Relatedwhen i bought the router, the function worked fine, even before my first firmware upgrade. Can CISCO fix this? I tried everything...power off, reboot, etc...that stupid button is not working....
if something as simple doesn't work, what's next on this router to break?