I have changed the wireless router and reset and kept the same old Name and password. This is functioning satisfactorily and my all other devices such as lap top, mobile etc are connected. But another laptop is not identifying the connection and hence unable to connect to internet. I have tried diagnostic and repair tools but have failed.connect my device to internet via wireless router?
View 1 RepliesI recently purchased a new broadband wireless GA DSL2+ router HUAWEI Echolife HG520b. I have set it up on my computer and have been successful in connecting to the internet via my laptop which runs on windows 7 but my other laptop running on windows vista SP2 is unable to connect wirelessley to the internet. It is able to find and connect to the router with no problem. But it appears unable to identify it and cannot connect me to the internet. I have tried many things and nothing seems to work.
View 3 Replies View Relatedbasically we got sent this new router from Orange (our ISP) and we have had problems with it for the last week. The router model is the Netgear N150 DGN1000. Sometimes I connect it will be absolutely fine, but then the next time I log onto my laptop it can't identify the network, it says connected but doesn't have the globe in the bottom right hand corner of my screen. Then we have to reset the router a few times everytime until it recognises it, even though the settings are saved when we connected last time. It is the same with my sisters laptop. We both have Atheros network adapters so that may be a compatability issue with the router, but my brother connects fine on his everytime. A similar problem occurs with modern warfare 3 on my ps3, it won't let me sign in to playstation network half the time and keeps saying NAT type failed, even though NAT is enabled on my router. get this problem sorted and to get a consistent network connection that connects every time that would be great. We changed the security type to WEP on it a few days ago from WPA and that meant we could sign into modern warfare 3 some of the time rather than never, but we are still having issues.
View 8 Replies View RelatedLaptop detects not all available wireless connections and at the same time on existing connection is very poor signal strength. I make this announce when I compared my and my friend laptop wireless connections, his laptop detects more than ten available connections (when my ASUS K55VD with "Atheros AR9485WB-EG Wireless Network Adapter" finds just two, no more and both are on very poor signals). I have to be in the same room where is rooter if I want to use the Internet, and as for my friends they can use same wireless connection all above the house. I tried to re-install all network drivers on my Laptop, use programs like Xirrus Wi-Fi inspector, but also, no more than two available connections with poor signal strengt.
View 4 Replies View Relatedmy laptop detects my wireless network but it doesnt connect to it
View 1 Replies View RelatedI have a Gateway laptop the was recently brought back from the dead (basically)... So once the rescue and recovery was done some of the drivers were lost including the wireless adapter. I found most of the drivers and was connecting to the internet wireless fine. I just got internet installed in my house a few days ago, in the beginning the laptop would connet to the internet through the gateway set up in my home. Someone reset my modem back to the default settings by mistake. So I reset everything back to the way it was but now the laptop wont connect. I thought it may have been a problem with the modem but when I checke it it says everything is working fine so Im assuming that its something wrong with the laptop. It connects fine if I plug the ethernet cord in and I get the 'wireless networks detected' message and when I clikc on it my network is displayed but when I try to connect it says windows is unable to connect to the selected network. the network may nolonger be in range.
View 3 Replies View RelatedMy computer is a thinkpad with vista and when i go home to my wireless internet it connects just fine. When i go on campus to use wireless internet it also works just fine. But when i am at my apartment using a Netgear wireless adaptar connected to broadband cable provider. my computer just keeps telling me that the connection is unidentified and I have to use my ethernet cable all the time. I have two roommates that connect just fine (one has a macbook the other has xp)
View 4 Replies View RelatedI have a Toshiba Satellite laptop that I can't get to identify my wireless network. I can get online using an ethernet connection to the router, but it can't identify the network and the wireless connection gives me just Local Only. I have another laptop that can connect to the router, and the Toshiba can connect to other networks. For whatever reason, the issue only appears when this laptop attempts to connect to this router. I've looked for suggested fixes, but none of the following have worked: Disabling firewall Deleting network adapters and having windows install them again Confirming that dynamic IP address is assigned Confirming that DCHP is enabled Running KB928233 I've tried every suggested fix I could find and nothing has worked. I have a Clear Home modem connecting to a Toshiba Satellite A215 with a Atheros AR5007EG Wireless Network Adapter and Realtek RTL8101E Family PCI-E Fast Ethernet NIC.
System Info Utility version 1.0.0.1
OS Version: Microsoft Windows Vista Home Premium , Service Pack 2, 32 bit
Processor: AMD Turion(tm) 64 X2 Mobile Technology TL-60, x64 Family 15 Model 104 Stepping 2
Processor Count: 2
RAM: 1917 Mb
Graphics Card: ATI Radeon X1200, 128 Mb
Hard Drives: C: Total - 151125 MB, Free - 84247 MB;
Motherboard: TOSHIBA, IALAA, 1.00, 0123456789AB
Antivirus: Trend Micro AntiVirus, Updated and Enabled
I'm running a Dell and a Sony laptops with XP sp2 and using a toshiba Windows 7 as wifi network host. I had been using a Belkin Wireless G plus MIMO router and have now switched to a Belkin ShareN300 router hooked to a Mediacom modem for internet access. All computers have Internet access but not sure if XP machines are running G versus N standard. How do i find out what class network card is in a laptop and how to upgrade to get best performance from new router?
View 1 Replies View RelatedI have tried restarting my laptop multiple times (something that usually works for me in terms of reconnecting to the internet) but that didn't work. And like i said it does not recognize a single wi-fi network while my ipod, phone, and the other computers in my household recognize our wi-fi and our usual neighbors wi-fi without any problem.I was torrentingsome music yesterday, and may or may not have stumbled across a bad site with a virus, but that's the only conclusion I could make.(Currently posting this on my brother's computer)I need to get my connection back and get online again asap?
View 8 Replies View RelatedMy laptop normally always works on the wireless network, but every now and then its randomly stopped working and said "identifying network" followed by "could not identify network, unidentified network." When i would troubleshoot it would say stuff about the default gateway and not a valid ip address. THis was fine because it would always just start working on its own in a day or so. However these arnt coming up when i do the troubleshoot this time, and its been over a week and no improvement.Im obviously writing this from the desktop. and the stats below are the desktop stats.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz, Intel64 Family 6 Model 26 Stepping 5
Processor Count: 8
RAM: 6135 Mb
Graphics Card: NVIDIA GeForce GTX 465, 1024 Mb
Hard Drives: C: Total - 953766 MB, Free - 437284 MB;
Motherboard: MSI, MSI X58 Pro-E (MS-7522), 3.0, To be filled by O.E.M.
Antivirus: Trend Micro Titanium Maximum Security 2012, Updated: Yes, On-Demand Scanner: Enabled
So a few months ago I bought a wireless router, and I've been using it just fine with my laptop ever since. however, my father-in-law has a laptop and he can't connect to the router. and the other day I bought a brand new desktop PC, and it can't connect tot he router either.both my FIL's laptop and my new desktop detect the wireless router, then when connecting ask for the passphrase. so i put in the passphrase and hit connect, and it says that it couldn't connect (quite the vague error message).
I tried putting in an incorrect password, and an error message comes up saying that the passphrase is wrong, so I know thats not the problem. Next I dissable all security, and both are able to connect to the router just fine, but not with the WEP pass phrase.I don't understand why they can't connect since I have the proper pass phrase. I also have a nintendo DS and Wii, both of which are able to connect to the wireless router with a passphrase, but not without.
so, if I have no security all 3 comps can connect but not the wii or DS. and if I have the WEP security on, only 1 laptop and the Wii/DS can connect. furthermore, my DS requires a WEP security key to connect.so anyways, what would cause the problem with the laptop/desktop recognizing the wireless router, validating the password but not actually connecting? but being able to connect without any security?
I have an E900 I replaced an old Airport Extreme with. The reason was for increased download speed. The Apple router I used saw my work network and I could access files and printers; no changes to my Mac were necessary. It worked out of the box. The new Linksys has Internet connectivity but will not see my work network at all. I have looked into the old settings and cannot figure out how to make the new router see my network. I called Linksys but no dice. What settings need to be changed to see the work network? It is connected to the same ethernet cable as the other router that worked fine.
View 1 Replies View RelatedI am having trouble identifying exactly with Modem/Router I have. The only Numbers I see is the FCC #, Serial Number and a WEP access Number.
View 3 Replies View RelatedI'm having trouble connecting my desktop to my home network. It was working fine last night, got home from work and voila, can't connect to my router anymore. My setup is cable modem, router, desktop via ethernet to the router, laptop. The laptop, which I am using right now connects just fine wirelessly to the router. Nothing has been changed to the desktop, no software installs, no hardware installs, etc.. No malware / viruses were found either. I'm using windows vista sp2 x32.- Power cycling - Firmware updates - Network adapter driver updates - DHCP working fine on router - No MAC address filtering - Also tried static addressing - Restoring factory defaults on router - Desktop restore to last night's restore point ( when it was working ) - All kinds of diagnostics - Ethernet cable testing.
View 5 Replies View RelatedRegion : Portugal
Model : TL-MR3040
Hardware Version : V1
Firmware Version : TL-MR3040_V1_120822
ISP : Optimus Kanguru (LTE) www.kanguru.pt
I have a modem huawei E392u-12 from the service provider optimus kanguru, url..., and i would like to use my usb modem with this router i have. the router identify the modem but does not conect. i have seen that the bin files available are just for vodafone and TMN, what can i do so i dont have to buy another equipment.
I have a house with a Leviton Enhanced Infraestructure Platform that distributes cat5e wiring to multiple outlets throughout the house. The problem is: Some cables will not transmit the Ethernet (internet) signal, but when I connect a phone line to it, it works. So the cable integrity is fine, but somehow connecting the internet router to it will not make it work.
View 2 Replies View RelatedAfter having my modem and router switched off for about 3 hours (removing trojan on one machine) neither of my laptops or Nokia N8 can connect. The LAN is fine, all lights are showing ok on the router, inc WLAN, but no machines can detect the wireless signal?
View 6 Replies View RelatedI run a windows 7 x64 and I am currently running a Intel (r) 82579V gigabit network adapter. The thing is, the driver was made for 82579LM and V versions. Most of the time, my computer reads the adapter as the LM version, in which the ethernet just won't work. Once in a while it gets the V version and everything is alright, but i can't live with such uncertainty. Mostly people suggest i should just buy a new motherboard (?) or a new network adapter, but i'm sure it's a software problem. Shouldn't there be other solutions? The card itself is integrated.
View 12 Replies View RelatedI just set up my 655 and it hooked up to the internet right away. I also connected my x box and wi-fy iphone without a hitch. THen I tried to connect my blue ray player that has a wireless feature. My last dlink router recognized the blue ray without a problem. With the 655, the blue ray can see my router and network, but can't connect, saying their is a dchp issue or I need to fix the IP address. Dlink support told me to upgrade firmware but my version is 2.0, and the only thing I can find is a V1.34.
View 7 Replies View RelatedFor last few days I've been reading about Spanning Tree Protocol ,L2 protocol and understood how it prevents loop in network ,various steps in STP but one thing i wanted to know how STP actually detects the loops in network so that it can prevent it.Somewhere I read STP uses BPDU as probe and detects loops I mean how it happen is when switch send a BPDU with Destination Address as multicast and receive same BPDU again mean there is loop in network .But is it how STP detects loops in network?
View 5 Replies View RelatedIm running W7 64 bit and i have a netgear wna1000 and it detects networks but wont connect to them
View 5 Replies View RelatedI have a DIR-665 and I'm trying to install a B&W zeppelin air speaker, the speaker detects the wireless network but I cant see the airplay logo in the PC, mac, ipad or iPhone. Try with another router and ir works. try with a wired cable but still the same problem. IS there any issue with this routers and airplay, ATV or similar items? [code]
View 3 Replies View Related I cannot get wireless collection to work up stairs with the WUS600N Adaptor at all,and with the modem 20 feet from from my laptop downstairs i am only getting 3 BAR SIGNAL STRENTH.Just had Replacement WAG160N ALEX A V2 as my other one died ,(did not have a problem with the one sent back for replacement) Have the latest firmware 00.20 installed model serial No is SSH10JA11079.WUS600N V1 latest drivers for windows 7 .03.10.Windows detects the modem ok, but there is no signal at all up stairs and with the modem downstairs even the wireless on the laptop (15 feet from the modem) is only 3 bar signal strength ,did have this problem with the one I sent back. I have gone through all the wireless channels setup in the set up page with customer support (5 hours!)
View 2 Replies View RelatedI am using Dell D600 with WINXP SP2. It detects the wireless network but it is unable to connect with it. I have tried all tools available on dell site but nothing worked.
View 15 Replies View RelatedI'm using Linksys WAG160N - ADSL Modem/Router on one Desktop with Linksys WUSB Adapter. This connection is working fine.Recently I decided to add another Desktop wirelessly to share network, files and internet access. The second desktop is located in another room (approx. dist. is 30 Ft.)The second desktop detects the Modem but it fails to connect and it shows limited or no connectivity.
1. Allow Internet Access to both the desktops without loosing connectivity or without comporomising on speed.
2. Allow file/disk haring of desktop 2 with desktop 1.
When I connect my WUSB54AG, Windows(xp) detects cohiba 3887 rev0 device and I can't install it. How can I fix it?
View 4 Replies View RelatedI have what appears to be a 2.4 GHz usb wireless adapter. My PC will not recognize it. How can I get my PC to recognize it?
View 3 Replies View RelatedIm attempting to connect to a password protect WAP2 Personal Wireless Network (I have Windows Vista). Unfortunately I can connect to the network but it will not Identify the network therefore I cannot connect to the Internet.
I have tried turning off the router and my computer, I have also tried both of the windows fixes for this problem (Reseting the network adapter and resetting my IP settings).
I've seen where the micron is printed on a fiber strand, and that you can identify the connector type, but how do identify the difference between a 50 micron OM4 MMF, a 50 micron OM3 MMF, and a 50 micron OM2 MMF?
View 7 Replies View RelatedI have purchased a new home where cat5e was run from several locations throughout the house to the basement. Unfortunately, the runs were not marked. I know you can short one end of each cable and measure (voltage resistance?) at the other end in the basement to identify it. I need the process and equipment required so I can wire my home. The cables are not terminated.
View 11 Replies View RelatedI recently got a new computer from work, and it won't connect to my home network. I restored it to factory condition, and reinstalled the drivers for the wireless adapter card, but it won't identify my home network. The network adapter is a D-Link WDA 1320 and I'm trying to connect it to my home network which is AT&T Uverse, and the router is a 2wire 3800hgv-b. Hopefully that is enough information for at least an educated guess, I'm not so hot when it comes to home networking matters.This doesn't happen on any other computer.
View 12 Replies View RelatedI've recently moved house and decided to go with Virgin as my ISP. I was able to connect one laptop (running Windows 7), with no hassle, to the internet just fine, however, I've tried connected another laptop (running Windows Vista) and can connect to my router but cannot connect to the internet and it's telling me it cannot identify the network =/ I also can't connect to the internet if I use my ethernet cable. I phoned up tech support also and they recommended I update my drivers, but Windows is telling me I have the most up to date driver for my network adapter.
View 19 Replies View Related