(Engenius ERN 9250) Connected To Wireless Repeater With No Internet?
Mar 3, 2011
I just got a wireless repeater (Engenius ERN 9250) to use in my house, and I'm having issues after setting it up. I set it up using the WPS function with my router (netgear n600), and even if I connected to the repeater my internet would not work. I could access the repeaters admin page wirelessly, and I could ping it (192.168.1.2) just fine. However, if I tried to ping the router it would not work. I made sure that the repeater was connected to my router through the admin page, and I made sure to set the default gateway on the repeater to 192.168.1.1.
View 12 Replies
ADVERTISEMENT
Jan 1, 2012
I'm trying to install an Engenius EAP9550, configured as a wireless repeater. the instructions are beyond abominable (as the review on Amazon warned). They tell me to enter 192.168.1.1 (which is my linksys E2000 wireless routers address, though they say nothing about that) and tehn give me no other information on how to configure or set this up.
View 13 Replies
View Related
Jan 3, 2013
I have a lynksys router hard wired and wifi. It is eworking fine when I tried to set up a new Engenius 9550 router as a repeater I can't get the settings correct. I have reset the 9550 twice and still won't reconize the rounter in the home network.proper settings for the 9550.
View 12 Replies
View Related
Apr 13, 2011
How to make a security key of engenius router wireess
View 1 Replies
View Related
Feb 23, 2012
I have bought a Engenius wireless adapter because the Verizon FIOS router is in the other room and it is not practical to run an Ethernet cable from my PC. The supplied router is a UltraLine Series 3 9100EM Router, and the wire less adapter model is a EnGenius EUB9801. The signal is fine with every other wireless device inside my place.
View 3 Replies
View Related
May 5, 2012
I looked around the messages, but could not find anything on this topic. I need assistance with the CISCO WRT54G2 V1. I have an EnGenius EOC5611P (500mW) Repeater set up in my RV and it connects directly to the PC inside my RV using, a CAT 5 connection. I am now using a laptop and would like to connect to the EOC5611P using wireless. "Can I re-configure the WRT54G2 to connect the 5611?" (I would plug the router directly into the 5611). According to EnGenius support, it is possible, but the router would have to be re-configured, but they do not support this setup. I would purchase an EnGenius EAO 7530 which would work perfectly, but the price is $245. Here is the link to the 5611 information [URL]
View 3 Replies
View Related
Jun 30, 2012
From the broadband modem/router connected with a Gigabit 8 port unmanaged switch. Then, one WAP4410N is connected to the switch, wired connection for a distance of 90 meters. WAP4410N is set as an access point to the area. Then the second WAP4410N will be run as a repeater to the first WAP4410N. My question is that, can we set the second WAP4410N as a repeater, without the need for it to be connected to the switch via ethernet cable.
View 7 Replies
View Related
Jan 28, 2012
I have a WAP54g set up as a repeater. It even shows in the WRT54g device list (Tomato firmware) as a WDS interface but nothing can connect to it. I have the repeater's MAC address in the AP and it's set to "Access Point + WDS" mode. I don't know what I could be doing wrong. Is it a conflict of DHCP on the AP vs static on the repeater?
View 1 Replies
View Related
Aug 16, 2011
I recently purchased an Aztech wireless-n repeater #WL556E to increase my signal strength on my patio. I followed the instructions step by step and it works for about an hour and then stops. This is on my Apple iPad first generation. If I restart my iPad it works for an hour or so and quits. I have the repeater about 7 feet up on a shelf.my wife has the identical iPad as mine and hers works fine on the repeater.
View 1 Replies
View Related
Apr 10, 2012
I have this old router and I can't get into the setup. I tried all common passwords and it still won't log me in to the setup screen. The router is an EnGenius NL-5354AP Aries.
View 3 Replies
View Related
Jun 29, 2012
I like to create a access point and thinking to buy the Engenius ECB300 or the cheaper ZyXel WAP3205.
I cannot find anything about the power output of the ZyXel WAP3205 so I'm not sure what do buy.
View 1 Replies
View Related
Apr 12, 2011
I connected an EnGenius M5000 AP/Bridge to a switch, a Modem (VSAT) is also connect to the switch and aslo my Desktop standalone PC. All instructions were followed to install the EnGenius M5000. However, only the Power,Lan, and Wan light indicators are on but the Link/Signal indicators - red, yellow and green are not coming on.I tried pinging 192.168.1.1 according to the default IP address, but still there was no responds. Even I tried resetting it on the firmware, but it can not ping
View 2 Replies
View Related
Dec 15, 2011
I have a laptop running Windows XP that has a wireless card inside.
I have a Single Board Computer (SBC) running Linux that has an 'wireless access point' connected to one of it's Ethernet ports. I want to be able to transfer data between the laptop and the SBC wirelessly (cabling is not an option)
The 'wireless access point' I am using is the EnGenius EOC5611P - it can be configured for:
1. Access Point
2. Client Bridge
3. WDS Bridge
4. Client Router
I don't know which one of these I need,so working that out would be a good start!
View 1 Replies
View Related
Dec 8, 2012
i am setting up a network between two houses. I have two Amped Wireless SR300 repeaters and currently I am getting so-so signal strength between the repeaters. To remedy this issue, I purchased two EnGenius EAG-2408 external antenna's.My question is how to calculate how high to mount the antenna. A formula is preferable because I do not know the exact distance off hand and I will have to go out there and measure. I am estimating approximately 75 to 100 yards for the distance. Its flat, with a few trees/brush.
Repeaters:[URL]
-Transmit Power: Up to 20 dBm
-Receiving Sensitivity: -93dBm
Antennas:[URL]
-Omni Directional Antenna
-18 degree vertical beamwidth
View 19 Replies
View Related
Jan 16, 2012
wireless internet connection connected no bit it says no internet access what is the problem
View 1 Replies
View Related
Apr 27, 2012
I managed to flash my router (Belkin Sharemax N300) to dd-wrt and set it up as a repeater using these steps in the wiki, but I can't access the internet via the repeater. I can still connect to it, though. I don't know that much about networking.
View 1 Replies
View Related
May 9, 2012
I have a 2nd pc that i want to add to my basic home network. I have installed a fresh copy of Windows 7 Ultimate 64bit yet still have issues connecting to my router. There is basic activity but nothing on the internet I have tried to use command line netsh to force DHCP on it says it is but I am getting a subnet mask of 255.255.0.0 when everything else is 255.255.255.0 not sure if this matters as there are only 4 devices on the network.
View 2 Replies
View Related
Sep 29, 2012
i just got the Hawking HW2R1 and first i went through the setup as instructed but after all was done i tried connecting to the device from my computer. I was able to connect to the device but I didn't have any internet access (there was the little exclamation point next to the network icon). I know this is not due to internet problems with my router because my router (a Linksys befw11s4) has perfect internet connection. After this i called customer support. After an hour of talking to the person and going through many processes he says that we have tried all options available and told me about returning it.
View 1 Replies
View Related
Sep 10, 2011
wireless connected but no internet access on pc.. Netbook using same router worksUsing Micronet adapter for wifi access on pc and built-in wifi on netbook. Have looked at a lot of comments with similar problem.
View 1 Replies
View Related
Sep 14, 2011
I just set up my new HSI service with comcast. I am using a Motorala 5101 Cable modem. No issues with the ethernet connectivity of course. I set up a wireless network with a Westell router. Just now I found the westell 7501 router I use is meant for DSL service.
However I am able to go as far as connect to the wireless network without a hitch. The only problem is that there is no internet activity happening.
View 10 Replies
View Related
Sep 14, 2011
others pc are browsing on the wireless router and i connected my system to the same wireless and it actually connected but it does not open /access internet.
View 2 Replies
View Related
Feb 17, 2011
Connected to a wireless but no internet
View 1 Replies
View Related
Jul 27, 2012
I have an acer windows xp i have an belkin.3f94 wireless router i have tablets wireless computer etc connected with wireless but my acer will not connect its been set back to defult settings it use to connect to other wireless but noting now can not connect to internet my ics is not connected at all say connected and excellent but still nothing wired isnt working either i just tryed it.
View 12 Replies
View Related
May 30, 2011
Bought wifi from virgin and cannot connect to net when network connections say i am connected.
View 1 Replies
View Related
Feb 1, 2011
Host Name . . . . . . . . . . . : illusion-8099d4
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . :unknown
IP Routing Enable . . . . . . . :yes
WINS Proxy Enable . . . . . . . : noEthernet adapter Local Area Connection Connection-specific DNS Suffix .
[code]....
View 12 Replies
View Related
Aug 22, 2011
I am ressurecting an old pc using windows xp service pack 3. I can connect to my network but not the internet. I have tried several different solutions to no avail. If I connect to the local openzone I can connect, but not through my network. I am using a Belkin wireless card and the modem/router is a dlink 2740b
View 1 Replies
View Related
Feb 12, 2013
Using Windows XP. Wireless was working fine at my home wireless but "internet not working" in friend's wireless network. Wireless Connection shows connected and Packets Sent/Received is increasing but not able to connect to internet or ping.
View 1 Replies
View Related
Jun 5, 2012
I'm not sure why I have a broadband connection AND a local area connection, but I cannot connect to the local area connection whereas the broadband connection is fine. I've already set to obtain IP address automatically and still not enabled. The wireless connection was working fine a few days ago, and seems to have been reset by the ISP causing these issues. Other devices are also unable to get internet though they can detect and connect to the router. Here is my ipconfig/all. Note: I am in China so my settings are possibly different than what you're used to.
[code]...
View 13 Replies
View Related
Sep 11, 2012
When using my Windows XP SP2 Laptop and Desktop, it says that I HAVE excellent connection to the wireless internet but I CANNOT browse or download content. When using my Andriod phone I CANNOT connect to the wireless internet. When using my Mac laptop and Iphone I CAN connect to the wireless internet. I HAVE internet connection and I CAN browse the internet when I DIRECTLY connect the modem to the Windows laptop.
View 17 Replies
View Related
Aug 11, 2012
cant on that thing up it showz the WiFi is off no internet connected.
View 1 Replies
View Related
Feb 13, 2013
I've recently taken on this ageing hp laptop with windows Xp installed. After resetting to factory settings I moved on to getting it on the internet but with no luck. The Connection to the router is there and keeps telling me I have an excellent connection but every time I open up the internet browser it tells me the page cannot be read.
View 1 Replies
View Related
Jan 6, 2012
I recently had a virus which I believe I successfully removed (virus scans show no threats) but now I am unable to connect to the internet. My computer shows I am connected but IE displays error message 12007 and Mozilla says "server can't be found." I am running Windows XP SP3
View 1 Replies
View Related
Jul 27, 2012
I just switched to Comcast cable internet with newly purchased cable modem and D-Link Dir 601 router. After setting up the modem and router, I can connect to router via wireless with three PCs that all running Window7 OS and go on line. The problems that I have are with PCs (two of them) that run Windows XP. One of them is the PC that I use to set up the cable modem and router with Ethernet. I can not use wireless connection to go online with it. The wireless is connected but it gives me a message "no server found ..." in browser window. The 2nd PC running WinXp also says wireless is connected, but I can not go online. The followings are the results of running ipconfig /all for 2nd PC[CODE]
View 1 Replies
View Related
