I've noticed a problem with log collector on the secondary acs server. It suddenly stopped to collect logs.So, current acs version is 5.1.0.44.3 and all processes were running. During this time, ACS sent a couple of authentication reports in the monitoring system.But they can not be viewed through ACS Monitoring&Report system. The problem was solved by rebooting the server.
View 0 RepliesWe got 2 Cisco ACS 5.2.0.26.10.Primary server as authentication server and log collector.Secondary server as authentication server. Replication is configured. url..."There are some exceptions to this usual setup, which you can handle as described below: If the ACS 5.3 primary server also functions as a log collector in your 5.3 deployment, you should promote any one of the secondary servers as primary server in the deployment. See Promoting a Secondary Server to Primary "
This exception matches with my case. I have to promote my secondary server as primary.I would have :Secondary server as authentication server and log collector.Primary server as authentication server. I think I have to deregister secondary from primary server..According to the guide, I have to upgrade the log collector server. "Step 1: Choose any secondary server to become a log collector:" I dont have another secondary server..
My VRF Collector job has started failing. I have attached the contents of the vnmcollector.log file after setting debug level to DEBUG.
View 1 Replies View Relatedmy LMS 4.2, syslog collector on LMS doesnt working even service syslog collector running normaly and also i saw in syslog_info is working to collect syslog from all router but not show up in dashboard monitoring.I have setting on every router to logging (ip address LMS) but on LMS no any syslog from router can collect.i did a selftest from LMS there are all PASS except nslookup fail, it is has relation with syslog not show up on dashboard?
View 5 Replies View RelatedUsing Netflow on Cat 6500s with the NAM-2 as the collector?
View 7 Replies View RelatedI'm using CiscoWorks LMS 4.0.1 and I need to activate a remote syslog collector.Installation occur without errors and the test subscription is fine but syslog reports are always empty!These two servers need to communicate through a firewall.I'm not able to define a correct rule, a "permit ip any any" does not work also!
View 1 Replies View RelatedWe have LMS 4.1 in our network. We had recently installed Remote Syslog Collector on a new Server to collect logs from all the devices. How can we integrate the Remote Syslog Collector with the LMS Server?
View 3 Replies View RelatedIs there an .ISO file for installing on Windows Server20888SR2 ?
View 1 Replies View RelatedI'm trying to create a LMS 3.2 IPM Collector, but no source devices appears in the wizard.I have the Auto Mode Enable in the Auto Allocation Settings, and in IPM Devices I can see all my devices. ¿
View 2 Replies View RelatedI have three ASA5505, two firewalls connected to central VPN hub. the central inside network is 192.168.0.0/24,Network A is 192.168.1.0/24,Network B is 192.168.2.0/24,In one of this site (central), I have server with NetFlow collector.,I will collect the traffic information from all ASA at the my one serverCan I configure source IP address (or source interface - inside) for NetFlow packet, originate from ASA? (for example from site A)If it is not possible I think, I can rewrite my access lists and permit udp traffic from outside interface to server IP like this:access-list VPNACL permit udp host <Outside IP site A> host <Inside IP the Server> eq 9996,But I do not understand, what port I must be use in access list on Central site ASA. ,access-list VPNACL_A permit udp host <Inside IP the Server> host <Outside IP site A> eq 9996 ? or, in this place, must be source port in the udp netflow packet?
View 2 Replies View RelatedCan ASA 5510 be configured as bridge mode and still send Netflow info to a collector?ie have a PIX connect internal network to internet. Because PIX does not support NetFlow, as a temporary solution, we were thinking of putting an ASA 5510 between the PIX and internet gateway, and configure it as a bridge so that there will be no routing issues, and the ASA can still send Netflow info to a collector.
View 2 Replies View RelatedCan ASA 5510 be configured as bridge mode and still send Netflow info to a collector?We have a PIX connect internal network to internet. Because PIX does not support NetFlow, as a temporary solution, we were thinking of putting an ASA 5510 between the PIX and internet gateway, and configure it as a bridge so that there will be no routing issues, and the ASA can still send Netflow info to a collector.
View 1 Replies View RelatedMy PC freezes up everytime i go online & i have to manually switch off. Why?
View 3 Replies View Relatedwhy our PBX system would freeze up the phones. There is no real reason why this happens. We have the PBX on its own circuit board, so its not sharing any power, we only have about 200 phones on the system, so that is not the issues. Its properly cooled. It just seems to happen that our phones freeze, and when they start freezing it seems to happen in pairs.
View 1 Replies View RelatedThis just started this morning after I got AT&T internet. It keeps freezing up my mouse for like 3 seconds every 10 seconds or so when I am online.. but when I disconnect it, the mouse is perfectly fine.
View 1 Replies View Relatedwhy does my wireless connection freezes when i am online? i have to shot down and on the system before it works again
View 2 Replies View RelatedMy TP-Link WR1043ND router is constantly dropping my cable connection on a daily basis. The problem is that when it does, it also freezes or at least when I try to access it through its IP it won't show anything, but a classic 404 error page. If I reboot it by unplugging and plugging it back it works fine after that.
View 4 Replies View RelatedI have four 24-port BayStack switches connected to in a series, that have been freezing up over the past year (when I look at the front of the switches all connected ports are lit and and activity lights are not blinking but solid). I usually find the switches this way when someone at the church/school tell me that internet is down and the solution is to cycle the power on all switches. This has been happening more and more lately and I was wondering if anyone could, off the top of their head, possit a guess as to what is happening. Now these are configurable switches that I have not configured; I just bought them off of EBay and put them in line - they gave us years of trouble free service. My guess is that the switches are getting caught up in a loop and thus freezing them. My assumption is that the switches have STP running by default and maybe the STP stopped working. I have purchased 2 Cisco WS-C2948G-GE-TX to replace the BayStack switches, as our internet speed will be going over to Google Fibre in the next 2 months.
View 8 Replies View Relatedwe have an hp laser printer 2055dn that kept on getting an error "49 err 6a2023e" whenever we plug in an ethernet cable (the ethernet light flashes like crazy as soon as we plug it in)
our setup: 1 Dlink router, everyone and everything is basically connected to that router (e.g. the printer).
how do i find out either if someone is sending crap to the printer that freezes it, and if so which computer it is? probably need its driver reinstalled i'm thinking.
I am having the same exact problem with the random freezing. I used to be sponsored on Xbox 360 for call of duty black ops and my mom met this guy and i had to move into his house, So now i had to drop my sponsorship and everything because i randomly freeze for about 3 seconds and then unfreeze and i jump forward and catch up to what apparently i was doing but not doing on my screen. It even happens on world of warcraft on my computer and it is very aggravating to have to deal with. And just like Cassius is saying "the ping spikes ruin online gaming entirely and tbh."
View 2 Replies View RelatedOn a Microsoft xp network when we log off or shut down (randomly) users will have their computers lock or freeze at saving settings. The network is school district with around 1000 computers total.
-We think it is an issue with DNS or DHCP but we can not find anything only about our issue.
-It occurs randomly, but seems to target certain machines more. In a lab about 3 quarters of the computers are not affected and the other quarter will have it happen, but not every time. It will happen on student, teacher, and admin accounts.
-It has "spread" to 3 buildings now. At first it seemed to be an issues at one building but over the course of a week two new buildings are affected.
-No major changes in our network over the past month either.
I have Cisco 877 router it is losing connectivity almost after every one hour (freezing or hang) after reboot comes up back.
View 3 Replies View RelatedI use the internet wirelessly via a Netgear JWAGR614 (I guess this is the Japanese-market version of the WAGR614), which works fine with my old laptop, a Toshiba Dynabook running Windows Vista. When I use it to connect with my new laptop, however (also a Dynabook, using Windows 7 32-bit), the connection to the router will freeze every few minutes. (It still claims to be connected, but no data seems to get through.) It will then come back after about 20 seconds, or faster if I disconnect and reconnect manually.The connection of my other PC is not affected during this time, it is still transferring data normally even while the new PC cannot.
View 6 Replies View RelatedI recently got a secure token to be able to connect to my desktop at work from home.The first couple of times I connected it worked well. Now when I try to connect it works for about 4 or 5 minutes then the remote session freezes up and the window won't update. Once it freezes I no longer can connect at all to my work PC until I physically go into the office and restart the computer. Our IT dept can't even connect to the work computer once that happens.
I'm trying to think of what could be causing this to happen when it worked fine the first couple of times.It could be a coincidence but the last couple of times this has happened I think I had just opened an IE web browser on the remote work pc but that could be unrelated and I don't see why that would affect it.The only thing that I can think of that has changed is on friday I got a juniper router and a Polycom IP phone so that I could use a work phone at home over my home network, however that should have any impact and the freeze up is happening remotely not at home.
Details:
I'm using a laptop at home running Windows 7 Ultimate
I connect to my work network using a web based ssl vpn web page logging in with an Aladdin Safeword token over IE9 using Juniper terminal services client software.
My home connection consists of a cable modem which has a wireless router plugged into it.Plugged into the ethernet port on the back of the router is a broadband-over-electric adapter that runs broadband over my electric current in the house. I then have a receiving adapter for that electric adapter running ethernet from the electric outlet into the Juniper router. The only thing plugged into the juniper router is the Polycom IP phone. My laptop connects wirelessly to the wireless router.
As you can see, with this setup the addition of the Juniper router/ip phone should have no impact on me connecting to my work network over the wireless connection so it is probably a coincidence. What could be causing the remote desktop session on my work machine to crash & stop accepting connections?
I'm having a problem with my WMP300N adapter. I upgraded my computer and ever since a have this frustrating experience that my PC keeps freezing, I mean completely freezes, nothing works. Before, I was already using Win7 (32-bit), so that can't be the problem. Now I went to a Win7 64-bit system, but that's not the problem either, because another PC in my house is also running on Win7 64-bit, with the exact same adapter and doesn't have any problem at all!
The only difference between the two PC's is in the motherboard. The PC that does not have problem has a motherboard with a P43 chipset and the PC with problems has the X58 chipset. My guess is that this can be the reason for the problem. So my question is:
Does anyway on this Forum has a motherboard with a X58 chipset and uses this (otherwise fine!) adapter WMP300Nv2
Code...
Our controller get freezing every week at least twice, and do not know what is the reason. I am attaching the log for you to look at it. Last time happened was yesterday at around 13.00 pm.
View 15 Replies View RelatedI have looked through the forum for answers to my problem, but does not look like I'll find it.The problem: Router randomly freezes.When this happens:No IP/DNS,No response to ping,No contact at all (wifi or cable),Works fine after reboot for some time.
View 2 Replies View RelatedI work from home and log into my work using a token I get into my work server but it keeps freezing and boots me out. If this makes sense. I have to use my mums laptop windows 7.
View 2 Replies View RelatedI have been looking for a new router as my current one has packed in. I am mostly interested in a router with a fast and stable wifi and high throughput which can manage a high amount of maximum simultaneous connections. The linksys e4200 seems perfect and very well reviewed.I am currently on adsl, no cable in area, so i would need one to have an adsl modem. Is there a version with a modem? Or will i need to look around for another?
I am mainly interested in throuput and the reviews and comparison sites sugest that linksys seems perfect midway between max simultaneous connections and price. Any comparison website that has adsl routers. The information am looking for on that's between £60 and £160 with high amount of ram, high throuput for Maximum Simultaneous Connections, similar to link text
My Wi-Fi keeps on freezing and I have to unplug it all the time. I have the e1200
View 9 Replies View RelatedRegion : Canada
Model : TL-WR941ND
Hardware Version : V5
Firmware Version : wr941nv3_en_3_13_9_up(120201)
ISP : Teksavvy
This wireless router keeps freezing. It might stay up for 6 hours at the most, then I have to reset it or unplug for 10 seconds to get it to reset. I updated the firmware a few months ago thinking this would solve the problem. It hasn't.
Region : Bangladesh
Model : TL-WR720N
Hardware Version : V1
Firmware Version :
ISP : Is pros
After i bought the router it was working perfectly. But after using 1 week it freezes now and then. Happens around 10-30 times a day. The one or two led lights stops flashing and no device can connect to the router or asses internet. Another issue is that sometimes i cant connect any device through wifi (tried with android phone and ipod) and and but works perfectly on my pc. If i restart my router is works perfectly but after 1 min-3 hours sames problem happens either router freezes or cant connect though wifi
When i stream higher resolution videos to my TV or PC, from the usb stick attached to my router(linksys EA4500). The videos freeze, then playes again, then freeze, etc. I have no problem with lower res. videos or music
View 9 Replies View Related