AAA/Identity/Nac :: ACS 5.3.0.40 With Blue Coat Packet Shaper Via Radius
Sep 3, 2012
We have a strange issue may be an known issue. We have the ACS 5.3.0.40 with Bluecoat Packetshaper (Packeteer) as the Radius Client and tried with PAP as well as CHAP with the suggested VSA. But once we try to authenticate with GUI in the PS end we get authentication failed. i.e its says invalid password but in the ACS end we get it as the Auth success log. We are not able to login to the PS as well. What is the issue anything to be done with the patch upgrade or any issue with the packetshaper? [code]
View 3 Replies
ADVERTISEMENT
Jan 17, 2012
In my lab I have a Guest Wireless network setup and fully functional. Here is a brief diagram:
Client -> AP -> LAN switch and WLC-Foreign -> Core router -> DMZ switch and WLC-Anchor -> Edge Router -> Internet
I have NME for credential management on the LAN as well.The WLC-Foreign is a 5508.In my DMZ, I have two networks - 1 for normal DMZ management and 1 for Guest Wireless.
I now have to add a Blue Coat web proxy appliance into the DMZ and have Guest Wireless traffic pass through it. I have tried multiple scenarios including connecting the WLC-Anchor to the Blue Coat directly and making the Blue Coat the gateway for my Guest Wireless network. Any good design for the DMZ networks and/or routing to enable the Guest Wireless traffic to go to the Blue Coat and then out to the Internet?
View 11 Replies
View Related
Mar 19, 2012
how I can determine what attribute is coming up as 'invalid' ?Tried full debug and looked at all the logs - nothing.
View 1 Replies
View Related
Oct 30, 2011
I am currently useing ACS 5.2 and have no problem using Tacacs+ with AD access.
But with Radius it seems I can only get the Local identity store to work, need to do something special to get Radius to work with active directory with Cisco ACS?
View 10 Replies
View Related
Dec 22, 2012
Using Cisco ASA I want the ssl clientless vpn users to be authenticated through a local Radius-Server. but it does not work, and on asa while i want to see (Debug Radius) output, there is no debuging msgs displayed. When i try to test the user which i have created on the ACS-Server 4.2, the test gets successful. where i have made a mistake in my configuration ?
View 2 Replies
View Related
Nov 22, 2011
I have been trying to get our IPS (ASA-SSM-10 and 4260) to authenticate with Cisco Radius ACS 5.2 and they are not working. However, I was able to get them working with Microsoft Radius. Below is the logs from the IPS:
evStatus: eventId=1321566464942057375 vendor=Cisco originator: hostId: NACAIRVIDLAB1 appName: authentication appInstanceId: 350 time: 2011/11/23 17:50:38 2011/11/23 09:50:38 GMT-08:00 controlTransaction:
[Code].....
View 0 Replies
View Related
Dec 3, 2011
I need to configure RADIUS VSA configuration for a my alvarion device. Following are the attributes that need to be configured.
- Packet Data Flow ID (ID 1, integer16)
- Direction (ID 4, integer8)
- Transport Type (ID 6, integer8)
- UplinkQoSID (ID 7, integer8)
- DownlinkQoSID (ID 8, integer8)
[code]....
I was able to configure the first 6 attributes, how can I add the Sub - TLV's ClassifiedID, Priority, VLAN-ID and Classifier Direction which come under Classifier. Don't see any option for that in ACS 5.x
View 1 Replies
View Related
Jan 31, 2012
We have 2 ACS 4.2.1 servers in Windows 2003 with SP2 installed. We have updated the first ACS to the latest patches for Windows. After that we started having problems. CSRadius either stops by itself or when some time passes we get the following error in Failed attempts "Unknown error". When we restart the ACS services by the GUI, it resumes until the next time it stops.Do you happen to know if we have any bugs related to Windows patches?
View 3 Replies
View Related
Mar 25, 2013
I am trying to configure AAA authentication and authorization with Cisco 3725 (IOS 12.4(17)) for 802.1x and ACS 4.2 with VLAN assignment to my Windows XP client. (trying to assign VLAN 100 in my scenario).When user connects to the Router, it passes the authentication process (EAP-MD5). In my debug i see that Router recieves the Radius Attributes BUT does not apply anything!My running config:
Building configuration...
Current configuration : 1736 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
[code]......
As a result the vlan-switch data based does not change.
View 3 Replies
View Related
Mar 10, 2011
I have a questión about radius authenticaction with AD, when I log in into the network with user in AD and I make a mistake in password my radius authenticaction event in ACS 5.2 dont show me this logg. only show the authentication succeeded but dont show me the authentication failed. Maybe i must to enable same service to show the authentiaction failed. The Voice authetication works fine..
This is the confg in the port of the switch:
interface FastEthernet0/12 switchport mode access switchport access vlan 2 switchport voice vlan 10 authentication port-control auto authentication host-mode multi-domain authentication violation protect authentication event fail action authorize vlan 11 authentication event fail retry 2 action authorize vlan 11 authentication event no-response action authorize vlan 11 authentication periodic authentication timer reauthenticate 60 mab dot1x pae authenticator dot1x timeout tx-period 10 dot1x max-reauth-req 3 spanning-tree portfast end
Vlan 2: DATA
Vlan 10: VOICE
Vlan 11: GUEST
View 1 Replies
View Related
Apr 10, 2012
I have the next config of radius authentication:
aaa new-model
aaa authentication login default group radius local
aaa authorization exec default group radius local
aaa session-id common
ip radius source-interface Vlan31 vrf LEGACY
[Code] .....
View 3 Replies
View Related
Mar 17, 2012
I want to add Radius attribute to Rad ware devices , so I will have the option to grant "read only" permission to users. as I understand I need to add VSA for the "read only" permission, or configure specific "Service-Type value 255"
in the following picture you can see the required information from Rad ware:
View 1 Replies
View Related
Mar 28, 2013
I am using the Self RADIUS server in my Cisco ACS SE 4.2 appliance S. I have an AAA client C that interacts with S by means of the RADIUS protocol. This works fine, in that S correctly carries out authentication chores on username/password (PAP and CHAP) pairs received from C, sending back to C the corresponding Access-Accept packet when the authentication succeeds, or Access-Reject when it doesn't.
I have been able to import a set of three VSAs into S. Each of those attributes is of string type. I then configured in S a single user U with password P so that, whenever a U/P pair received in S from C is authenticated by S, S should send back to C, in the Access-Accept packet, the three attributes with the following values: [code]
With this setup, when an authentication is successfully completed by S, C receives 53 bytes worth of data from S every time. I am attaching a typical example, already disassembled. I have disguised the actual vendor ID, for legal reasons, but the rest is exactly as it was when received in C.
According to the disassembly, what we got is an Access-Accept packet, as expected. Its length is 53 bytes - again as expected, for this is the only packet that C has received from S here. However, the packet is incomplete, for attribute #3 is missing its value field.
Looking into the whole packet in more detail, it can be seen that while the wire format for the first attribute, namely, Frame-IP-Address, is correctly constructed, the remaining are not. For example, the sequence of bytes corresponding to the attribute #1 reads 1a 09 00 00 xx xx 2c 61 62 63. I believe that this is incorrect; it should be 1a 0a 00 00 xx xx 2c 61 62 63, for the wire format for this attribute consists of 10, not 9, bytes. I tried a few variations on the values for the attributes, and the results are always substantially the same, in that the wire formats for these attributes are always incorrect.
This all probably implies I have done something wrong when importing the VSAs into S, and/or when configuring things on S. I am therefore attaching the csv files I used to import my VSAs into S; as before, names and vendor ID are disguised, but their lengths are exactly the same as in the undisguised file. I used two csv files: One to import the vendor ID, and the other to import the VSAs under that vendor ID. As for user U, in S's administration GUI I clicked on User Setup and selected user U, moved to the bottom of the screen, where the attributes for this particular vendor were present,introduced the values for each attribute mentioned above, and made sure that button in front of each attribute was ticked.
View 2 Replies
View Related
Jun 3, 2011
Several of my older netscreen devices only support radius authentication and I'm having trouble migrating them from ACS 4.2 to ACS 5.1. When I try to authenticate, the authentication passes in ACS but it doesn't log you into the Netscreen (you see a auth failure in the Netscreen logs). I believe that the custom attributes are not being passed from ACS to the Netscreen. The custom attribute we are trying to pass is "NS-Admin-Privilege" with type integer and a value of 2. The netscreen is setup so that the user privledges are obtained from the ACS server.
Any setup where they are using Cisco radius authentication to authenticate Netscreen devices?
View 2 Replies
View Related
Feb 6, 2012
I was wondering if i should use the same RADIUS VSA attribute on ACS v5.1 to authenticate AAA clients as those i was using on my old ACS v3.3 server.
Example : under ACS v3.3 i was using RADIUS (Cisco Aironet) attribute to authenticate AP & WLC, should i do the same under ACS v5.1 ?
View 2 Replies
View Related
Jan 13, 2012
I've setup my ASA 5510 to use AAA to my Windows Server 2008 NAP. After many hours of troubleshooting I got my setup to work. The only thing I'm not satsified with at the moment is, that RADIUS is using PAP for communicating between ASA5510 and W2K8/NAP.I've tried ticking the box "Microsoft CHAPv2 Capable" box under Users/AAA => AAA Server Groups => Edit AAA Server.From EventViewer on W2K8/NAP I get Event ID 6278 and 6272., see attached filehow I change from the PAP to the CHAP protocol?
PS: ASA 5510 running ASA version 8.2(4) and ASDM version 6.3(5)
View 4 Replies
View Related
Oct 26, 2009
Wondering if it's possible to send a VSA from my radius server to my ASA-5505 that will instruct the ASA to use one of several split tunnel lists I have created, based on the user name supplied in the Radius request.For example, I can send a VSA of "ip:inacl#1=permit ..." and the ASA will dynamically create an access-list for that user.Is there a similar VSA for split tunnel?
View 8 Replies
View Related
Nov 22, 2012
I have defined Radius proxy on csg2 to external radius server, but pdp fails with Authorization failure message on GGSN and on Csg2 debut log I see “SAMI 3/3: Nov 23 15:11:43.937: RADIUS: Dropping the unsolicited RADIUS packet”
View 0 Replies
View Related
May 16, 2012
I need to add OPNET Radius attributes in ACS 4.2. How should I add a new VSA in ACS? The google search is pointing me to CSUtil.exe, and I cannot find this utility in the ACS install files. These are the values that I need added for OPNET. When configuring the RADIUS server to support the ACE Live Appliance, use the following Vendor Code and Vendor Specific Attribute (VSA): Vendor Code: 7119 VSA: 33.
View 2 Replies
View Related
Feb 27, 2012
When I upgraded my cisco 3750 ME from c3750me-i5k91-mz.122-46.SE to c3750me-i5k91-mz.122-58.SE2.bin all commands for radius disappeared? However, there are a lot of commands to ldap which was missing in the previous version. Seems as if the radius has disappeared and been replaced by ldap?
View 1 Replies
View Related
Jan 16, 2012
I've got a pair of Cisco ACS 4.2 servers running on our corporate LAN. Currently they are doing TACACS+ for the network gear, and wireless authentications for internal users.
We have contracted with an external web site for an application - They can run RADIUS from their site to our LAN for the user authentications. How can I best do this?
1. NAT the traffic on my ASA firewalls to the internal servers, send the RADIUS traffic to/from the external site?
2. Is this secure?
3. Should I have a RADIUS server in the DMZ instead?
4. Any issues with doing this on ACS 4.2?
View 0 Replies
View Related
Feb 27, 2011
I am trying to configure ACS 5.1 to authenticate SSL VPNs on an ASA5500 and aslo to provide admin access to the ASA5500 both via radius.I want to authenticate the VPN against a SeureID appliance and the admin login against a different database (using internal for testing but will use LDAP in the end).I cant seem to get the ACS to distinguish between the two authentication types. If I create a rule that says match protocol radius I can point that at either database but if I try saying match radius and service type 5 it doesnt match the VPN and falls through to the default authentication service. I have also tried matching service type 6 for admin and that doesnt seem to work either.In the end what I want to acheive is to authenticate teh ASA5500 VPN against the SecureID appliance and then admin access to all devices on teh newtork (a mixture of Cisco, F5 and Juniper) to active directory via LDAP where if the user is a member of the "admin" group they get access.I was intending to use specific devices for the ASA5500s (there aretwo) and then creat a device group based on IP address range for everything else.
View 4 Replies
View Related
May 24, 2011
I am trying to authenticate on Juniper NSM express using cisco ACS 5.2. The request is arriving at the cisco ACS but i am getting the following error.RADIUS requests can only be processed by Access Services that are of type Network Access.
View 4 Replies
View Related
Nov 18, 2012
I have CISCO ACS 5.1 radius for VPN on ASA and tried to configure an NDG on it for AIRONET 1260 too and worked fine with IEEE 802.1x CISCO EAP-FAST authentication As I had some trouble to let users to authenticate only on VPN if are VPN users and only on CISCO AIRONET if need only WIFI AIRONET I tried exception policies rules but something not working. VPN was ok but not WIFI access denied for rule policy access I decided to install CISCO ACS 4.x on Windows 2003 that is on ACS 5 DVD I created NDG as done on ACS 5 put a shared secret , put on AIRONET too as done for ACS 5 but I receive an error against ACS 4.x To troubleshout it I tried [URL] but not work ! I think to have done all fine owever on ACS 5 it worked in 5 minutes I searched log inside ACS 4 and found "Invalid message authenticator in EAP request" and I found this: [URL]Changed shared secret more times but ever not workign with ACS 4 I need to have user and password prompt on client trying to authentincate on AIRONET WIFI and I need ACS INTERNAL USER no active directory, no LDAP , no external user database?
View 1 Replies
View Related
Jan 9, 2012
I am having ACS 4.0.2 in my network, which I want to use for 802.1x Radius Authentication for Clients on PEAP-MSCHAPv2 methodology.As per the documentation " EAP Authentication with RADIUS Server", Doc ID: 44844.I have configured Network Configuration and populated AAA client IP range and Secret Key.
Question1: Under Authenticate Using option, there are various RADIUS flavors available for selection. For a Non Cisco AAA client, should I select RADIUS IETF?
Question 2: In the above snap shot, It has an option called Global Authentication Setup, where we can setup EAP configuration. Under PEAP subsection there is an option to "Allow EAP-MSCHAPv2" check box.After checking that, is a restart required to the ACS Server? Would it cause any disruptions to the existing services on the ACS?
View 3 Replies
View Related
May 26, 2011
is command accounting for Radius supported on ACS 5.2 ? provided vendor's radius implementation supports this capability.
View 1 Replies
View Related
Nov 19, 2012
I am trying to move my ISDN dialup branches authentication/authorization from old ACS 4.1 to ISE appliance. Before it was through ACS 4.2 with TACACS protocol but now since we are moving to ISE we are moving them to ISE with radius.
Problem is that isdn client gets authenticated and authorized but calls get dropped and they dont able to communicate with HO. IP address is assigned by Head End router to all remote isdn dialing branches..
I have used default "PermitAccess" in authorization policy and authentication policy is also default. I dont understand where I am going wrong as authentication and authorization is sucessful.
aaa authentication ppp default group radius local
aaa authentication network default group radius
aaa accounting network default start-stop group radius
radius-server host 12.18.22.41
radius-server key *****
View 8 Replies
View Related
Aug 21, 2011
I need to configure the ACS 5.1 to meet the following requirement :-
1. ACS 5.1 will point to a RSA SecurID as the first authentication mechanism for the validation of user credential
2. In the event that RSA SecurID is not reachable, the ACS 5.1 shall point to its local user database.
I had no problem configuring for Point (1), but I am not able to let it failover to the local user database.
View 11 Replies
View Related
Jul 4, 2012
how to setup ACS 5.3 to authenticate wireless users over radius? I currently have the SSID pointing to a Microsoft IAS server and would like to move the authentication to be done via ACS.
View 1 Replies
View Related
Jan 17, 2012
currently I'm evaluating an ACS 5.2.I need to authenticate the VPN-Users against LDAP, but have no direct connection from the ASA to the LDAP-Server. So the ASA should connect to the ACS to ask the LDAP-Identity-Store, OK.
My first Problem is: the ACS doesn't respond to the RADIUS-Requests of the ASA! ASA use's Port 1812, the Secret is ok, the ASA is as a Network Device in the ACS configured and I've created an internal Test-User on the ACS.the Firewall-Log shows the established connection (so I think, there is a Hand shake!? ), but the ASA says in Radius-Test: "EROR:Authentication-Server not responding".
View 3 Replies
View Related
May 18, 2011
getting a Cisco WLC to work with MS NPS server? We've done it before albeit with differnt code versions.
I have a Cisco 5508 WLC running 7.0.116.0 code hosting a WLAN configured for WPA2 with 802.1x for authentication. I have two Windows NPS servers configured as the RADIUS servers for EAP-TLS authentication. Via debug info on the WLC I can see the 802.1x handshake take place with the wireless client and the WLC as well as a successful transmission of an Authentication Packet from the WLC to one of the RADIUS servers. However on the WLC I see repeated RADIUS server x.x.x.x:1812 deactivated in global list and on the NPS server I'm seeing event log errors indicating "The Network Policy Server discarded the request for a user" along with the pertinent auth request info that I would expect the NPS server to receive from the WLC. Based on the WLC debug info I'm never actually getting to the EAP-TLS certificate authentication part. It seems the NPS servers don't like the format of the initial RADIUS authentication request coming from the WLC and so don't respond whcih in turn casues to WLC to switch to the other NPS server which produces the same issue.
View 2 Replies
View Related
Apr 10, 2013
i changed from ACS 4 to ACS 5.2. Everything works fine but i have authentication failed in the Radius accouting reports every time when users connect through ASA or Juniper into our network. Juniper amd ASA only send accounting informations to ACS. The users are not configured on the ACS, authentication is done via external LDAP. So my question is why do o see authentication error on ACS because Juniper and ASA only send accounting packets ?
View 2 Replies
View Related
Jan 19, 2012
I have configured a Cisco 877 router to send RADIUS requests when a user logs in to the console (Line Console or Line VTY) using the following config:
aaa new-model
aaa authentication login default group radius
aaa authentication ppp default group radius
radius-server host 10.0.0.1 auth-port 1812 acct-port 1812 key mysharedkey
When I log the RADIUS packets I see that the Cisco router is sending the initial AccessRequest using PAP.
How can I configure the router to send it's inial AccessRequest packet using CHAP?
View 5 Replies
View Related
