I want ACS 5 to authenticate the wireless users validating each user with a certificate. The ACS is connected to the AD but, is it possible to do that using user/password from the certificate?, i need to do that with certificate and independant of the AD certificates of each user, so it will be scalable.
View 3 RepliesWe have a ACS 4.3.2 installed with users authenticating against an Active Directory database. The AD database not only authenticate the users but also assigns the group that is used to select IP address pool.Now the requirements require to use token authentication with SafeNet. This authentication uses the same username but the password is composed of the original password + OTP.The problem is that the SafeNet server doesn't return the group membership.I've read about the Identity Store Sequence in ACS 5.x and I think I could use it in the following sequence:! configure an Authentication Sequence using the SafeNet token server (this works with ACS 4.x)I configure an Attribute Retrieval Sequence against the AD database. This would use the username only, no password and would retrieve the group membership.
View 1 Replies View RelatedI am wanting to generate a signing request for an ACS 5.3 box to send to a Microsoft CA. Is there anyone out there using a MS CA for eap-tls?
View 1 Replies View RelatedWe are using ACS v5.2.0.26.3 in 802.1X certificate based authentication. Now, when we added CRL functionality into ACS it fails in CRL validation and gives following error message:
LastErrorMessage=CRL PKI verification failed
Certificate Revocation list [URL]
We have installed root, device and server certificates from CA, but for management we are still using self-signed certificate.
Question is, which certificate is used when validating downloaded CRL file - one used for EAP-TLS or one used for management interface?
How I can check which certificate ACS server is using for CRL validation?
it's possible to enable Posture validation on ACS 5.3. If so, could I have a link or a procedure for implementation ?
View 3 Replies View RelatedI'm currently having issues testing OCSP servers for certificate validation on ACS 5.4. Server team claims everything is fine on their side, but all attempts result in the following error:12562 OCSP server response is invalid
I've already tried to disable NONCE extension support and signature validation, which hasn't really had any effect. How to debug OCSP processing or look into the problem more precisely another way?
Network Resources - Network Devices and AAA Clients- File Operations - Add - gives me File Format Validation Faliled. I am carefull to leave the header as it is. The header in the Import Template looks faulty, see attached. When exporting devices I also get the same header as attached. I also tried to change the header so its all in one column, but with same result.
View 1 Replies View RelatedThere is ASA with remote access VPN and users are authenticated using third party signed certificates (CA is not local in ASA).When user certificate expires i can see it in syslog messages. For example:
%ASA-3-717009: Certificate validation failed. Certificate date is out-of-range, serial number: (...)
I would like to know if there is an opportunity to view user's certificate expiry date beforehand, say, 3 days before?
In regards to becoming a Network Technician with the certification. Are there other passes as such that need to be obtained that i could slowly gather up, such as safe pass and so onIm thinking ahead and like to be well prepared.In regards to my CCENT course, thnigs are going pretty well and if all going well, my college is willing to give me a days work experience out side of my current work commitments to gain some crucial experienceHopefully when the time comes and i receive my CCENT qualification i can put experience along side it on my cv aswell as the above mentioned safe passes if needed.
View 3 Replies View RelatedI would like to upload the signed certification to LMS 4.2.2.After checking ( 4. option ) I choosed the 6. option and press "y" for questions and the perl script is freezing.
View 2 Replies View Relatedit seems that if i want to get IBM Cognos 10 BI OLAP Developer certification i have to pass COG-635 exam. it is said exampdf has released the latest COG-635 study guides.
View 1 Replies View RelatedI'm currently trying to set up a new infrasturcture with PEAP.
So, i've got redundant CA routers (c1921), an ACS server and 1262 AP's. Everything is working fine and as i want it to.Certificates are autoenrolled and so on, but if the CA root certificate expires, how to tell the AP to get the new root CA cert.
The root-certs are made by auto-rollover, and rolled on the CA router, but I got no change to get this root-cert on the AP.Is there a way to get them in an automated way, like rollover or enrollment?
I'm studying for a Cisco certification and I'm trying to wrap my head around the routing. I understand how routers work for the most part and how the get updates about networks and how many hops away they are, but I don't get what happens when a router doesn't know the path to a network.
View 19 Replies View RelatedRecently i purchased 1 no Cisco router 1941 from vendor but he didn't active Cisco security certification or SMART NET package.
View 2 Replies View RelatedTried configuring SSL VPN using Certificate authentication using a Microsoft CA server. Truspoint created and mapped to SSL VPN. While connecting the SSL VPN getting certificate validation failure. find the error screen shot attached
View 4 Replies View RelatedI just put together a new computer. After putting it together I installed Windows 7 64-bit. My problem is that every "https" website I go to fails at its certificate validation. Every browser I use (Firefox 4, Chrome, IE9) warns me that the security certificate failed the validation. If I click "continue anyway" the browser shows a blank page. This happens for every https site. I have tried mail.live.com, mail.google.com, bankofamerica.com, etc. I can't even connect to windows update (which is really bad). The problem is limited to this computer. All my other computers (2 laptops with windows 7 32 bit) connect to websites using https just fine. My computer is freshly installed, but I scanned for spyware/viruses/trojans and came up empty.
View 1 Replies View RelatedNew firmware for the Linksys E4200 was released this morning that adds certification for DLNA, IPv6 Gold log, and UPnP. It also addresses the Media Server issues that have been identified here in the community.Sept 28, 2011Last Firmware version: 1.0.03 (build 14)- Added supports of Native IPv6 over PPPoE Internet connection when only keep alive option is selected.- Added supports of Native IPv6 on guest network if there are more than two available IPv6 subnets- Added supports of Native IPv6 on Parental Control- Added supports of 3TB Hard drive with NTFS and HFS+ format- Improved firmware upgrade stability- Improved IPv6 WAN performance- Fixed media server unstable issue- Fixed Cisco LED flashing issue- Fixed some minor bugs- DLNA certified- IPv6 Gold logo certified- UPnP certified
View 1 Replies View RelatedI have an anyconnect account set up using version 3.0.5080 and connecting to an ASA 5510 base 8.2(2)17. We are using certificates for authentication. If I try and use the account on a windows machine it all works fine.
However on a mac running Lion if I try and connect via a web browser or already have the anyconnect client loaded and try to connect I always get “certificate Validation Failure”. I double checked the certificate was correct and am sure that is correct as it is the same certificate on the Windows and the mac. After searching online I have also tried editing the anyconnect profile to so it is set “certificate store override”, and put the certificates and key in the “user/.cisco/certificates” and “/opt/.cisco/certificates” folders.
After further testing, if I change the anyconnect connection profile to “authentication aaa” I can connect fine. Then if I disconnect, change it back to “authentication certificate” I can connect fine the first time, but all the following subsequent efforts I make fail. If I repeat this process this happens each time, I can connect the first time but after that it fails with the same “certificate Validation Failure” error message. When it connects this first time I checked and confirmed that it is definitely using the certificate. I have also tried using both authentication methods (“authentication aaa certificate”) and had the same problem.
This leads me to believe that my configuration is correct and it is some bug in the anyconnect client or the ASA image. I have had a look through bugs and read somewhere that there was a bug on earlier versions of 8.4, but nothing about 8.2.
I have an ASA (8.4.5) configured with a connection profile that does AAA and Certificate authentication. Once I have the anyconnect 3.1 on a win Xp system, it works perfectly. When I do a web install, it goes through the normal download, log-in, re-download then says "Certificate Authentication Failure" If I change the profile to AAA only, it installs fine. I even get the error if I launch from the web after I have the client on the PC. Why this is not working?
View 3 Replies View RelatedI am running a guest wireless network on a Cisco 5508 WLC with 6.0.202.0 code. My syslog is filling up with the following error message:
WLC: *May 15 12:32:59.244: %AAA-3-VALIDATE_GUEST_SESSION_FAILED: file_db.c:3968 Guest user session validation failed for guest_user10. Index provided is out of range..
The user that is assigned to the guest_user10 account works fine and has no idea this error is occurring.
This error message is occuring exactly every 15 minutes 24x7.
I believe I have a rogue user who has setup a device to try and login to the guest network automatically, every 15 minutes with the guest_user10 credentials. I need to track this device down. I need a way to find either the MAC or IP address of the device that is causing this error message. I have tried turning on AAA debugging on the controller but I dont get anything more than the above error. I have also tried using WCS to look at the client history but it only show the normal activity.
We inserted GLC-T modules and on Nexus 5548 they are showing SFP validation Failed , as per Cisco doc GLC-T is support . Since we have 28 such modules and all after inserting showing same error. please see the below details. I also try configuring speed and inserting modules but no result ..let me know whether my GLC-T module is supported on Nexus 5548
INMUMFDS1SWCORE01# show module
Mod Ports Module-Type Model Status
--- ----- -------------------------------- ---------------------- ------------
1 32 O2 32X10GE/Modular Supervisor N5K-C5548P-SUP active *
2 16 O2 16X10GE Ethernet Module N55-M16P ok
3 0 O2 Daughter Card with L3 ASIC N55-D160L3 ok
[code]
Upon checking the logs, I'm seeing a lot of these messages:
*emWeb: Oct 25 14:11:01.345: #LOG-3-Q_IND: spam_lrad.c:10136 Validation of STAT_PAYLOAD failed - AP 00:3a:98:09:4e:d0
Always the same MAC address, which I assume is a Cisco AP trying to join. The output interpreter/message decoder isn't much useful. 5508 Controller running ver 7.3.101.0.
I have Counterstrike Scource and am wanting to setup a deticated server. I have a netgear router with 27015 port open and my nat type is open, however it keeps on giving me the "steam validation rejected" error. BTW it works fine on LAN, just not online.
View 2 Replies View RelatedI'm trying to test such 802.1x wired environment:windows xp sp3 as supplicant windows NPS as radius server 2960 as authenticator latest anyconnect (3.1.01065) + nam and standalone profile editor.I have a question: What is the difference between protected identity pattern and unprotected identity pattern (set in nam profile editor)? As I understand documentation PEAP-MSCHAPv2 is a tunneled method and it uses un- protected identity pattern to protect user's identity during phase 0. But if I use any fake identity here (anonymous, anonymous@[domain], etc) access is rejected (Access-Reject in switch debugs). I have to use exacly the same pattern in unprotected identity pattern as in protected identity pattern ([username] or [username]@[domain]) to gain access, regardless of authenticaton mode (same in machine only, user only authentication).
View 1 Replies View RelatedI have a new Cisco Secure ACS 5.2 on a VM. We want to use it to for administrative access to our Cisco equipment with TACACS+. I am trying to map user permissions to different groups of devices based on active directory group membership, however it is not working.
I am using an LDAP (configured for secure authentication) external identity store. On the directory organization tab, I have confirmed the accuracy of the subject and group search base and the test configuration button shows that it's finding > 100 users and >100 groups.
On the directory groups page I have entered the groups according to the required format. cn=groupname1,ou=groups,dc=abc,dc=com
I have a rule based result selection under group mapping. I have two rules in the format below.
Conditon
LDAP:Externalgroups groupname1
Result
Identitygroup1
I have the default group set to a identity group named other. My problem is, no matter what user attempts to authenticate, the Default rule is applied, and the user is put into the other identity group.This occurs when I log on as a groupname1 user, groupname2 user, or as user that is not a member of either of those groups. LDAP authentication works and the user is able to logon to the device.
We are using ACS 5.2 and we are trying to create a Microsoft Active Directory (AD) Identity Store. We have a user to be used in the Active Directory creation General page and we would like to know how the test communication / ACS to AD communication takes place.
Our user is a predefined user in AD and has admin rights, but the password expires every 60 days. Will this affect the communication between AD and ACS 5.2 at everytime the entered user's password expires?
I'm currently looking for a solution in order to restrict the modification of the host internal identity store (add or delete MAC host) per group. The default administrator roles does not include "per group restriction". Under the ACS I defined one group per department? My objective it to allow each department to access their ACS MAC database to add or delete MAC addresses as required.
How to restrict internal identity store per group?Do I need to create new roles? and how?I was not able to get an answer from the ACS ADMIN manual.
I have a new ACS 5.3 configure and a ASA5550 to authenticate VPN users using a remote LDAP server. Once I try to authenticate the users with the ACS it gives me the error message "22056 Subject not found in the applicable identity store(s)."
I checked out the documentation and have already configure the Identity store sequences to redirect everything to the LDAP server, I also did the Bind test and it says that is ok, but I still have the same problem.
I validated the Access Policies Menu, and tried to create a new Service Selection Rules, but whet I get to the option of modifying the Identity option I get the error: "This System Failure occurred: {0}. Your changes have not been saved.Click OK to return to the list page. " and I'm not able to modify the identity, not in this new option I created, nor in the ones already created in the ACS.
I have two ACS v 5.2 (primary and secundary) and some users are in the internal stor and the others are in the AD.The local site topology is like this:
PC - AP - WLC - ACS - AD
Authentication method is PEAP(EAP-MSCHAPv2) and all user have the certificate company installed. The OS in the client users is Windows 7.Users was working fine but some users reports intranet disconnections. I see in the ACS log many "22056 Subject not found in the applicable identity store(s)." and "24415 User authentication against Active Directory failed since user's account is locked out" alarms.I believed it was because user wasn´t in the AD data base, but some times the same user is authenticated successfull and other i see the "22056...." or "24415...." alarms.
I switched the role for ACS primary to works as secundary and we see the same alarms.
I have ACS 5.2 running as a VM. I'm AD, then local authentication successfully for device access, but I want to define ACS user groups to restrict login. I don;t see any way to do this. If I use AD groups, they don;t show up as selection options on the policy screens, just the ACS locallyy defined groups.
View 1 Replies View RelatedI'm looking for Cisco ISE v1.1 to use the following licensing feature. url...Endpoint is dynamically profiled by Cisco ISE and assigned dynamically or statically to an endpoint identity group. Cisco ISE authorization rules do not use this endpoint identity group.
View 2 Replies View RelatedI am currently running cisco ACS 5.1.0.44 and use active directory as the main authentication identity store to allow network administrators to have access to network devices in my organization .As per the established security policies in my organization , the ACS has to disable any account after 3 failed login attempts to any network devices .i have gone through all the settings oN the acs but couldn't find where or how it is done .
View 3 Replies View RelatedI have installed ACS 5.4 and we are looking to authenticate our Anyconnect users with ACS via Active Directory. I think I have the correct commands in our ASA ( we had ACS 4 and authenticated our anyconnect users ).
I also have configured ACS to use Active Directory and installed the server side cert in ACS. I'm just uncertain how to program ACS to use the security group that I have setup in Active Directory.